Geology ReportsSearch

USGS · wsp1771

Geology and ground water in the central part of Apache County, Arizona

Abstract

The central part of Apache County, Ariz., includes an area of about 3,300 square miles between the Navajo Indian Reservation to the north and U.S. Highway 60 to the south. Sedimentary rocks in the area range from Pennsylvanian to Quaternary in age and from 2,000 to more than 6,000 feet in thickness. The strata were tilted to the northeast, and part of the Upper Triassic and all the Jurassic and Lower Cretaceous rocks were eroded away before strata of Late Cretaceous age were deposited. Basaltic lava flows and cinder cones, representing four general periods of eruption in late Miocene to Quaternary time, are widespread in the southern part of the area. Pennsylvanian and Permian rocks overlie basement rocks of granite and diorite and include the Supai Formation, the Coconino Sandstone, and the Kaibab Limestone. The Supai Formation is 1,000 to 2,000 feet thick and consists of interbedded red and brown mudstone, siltstone, sandstone, limestone, and evaporites. It contains water of very poor quality outside Apache County. The Coconino Sandstone is 200 to 250 feet thick and consists of light-gray fine- to medium-grained sandstone. It contains water suitable for domestic use in the south and water unsuitable for most purposes in the north. The Coconino Sandstone underlies all Central Apache County in the subsurface. The yellowish-gray to dark-gray Kaibab Limestone is present in the southern two-thirds of the area and is 0 to 350 feet thick. It contains water where it is fractured and combines with the Coconino Sandstone to form a single hydrologic unit that yields from 6 to 74 gpm (gallons per minute) of water per foot of drawdown. An unconformity Heparates the Permian rocks from the overlying Triassic rocks, which comprise the Moenkopi and Chinle Formations and the Wingate Sandstone. The Moenkopi Formation is 35 to 250 feet thick and consists of intercalated brownish-red siltstone, sandstone, and conglomerate. It contains salty water in some areas but is dry in most. The Chinle Formation is 0 to 1,550 feet thick and unconformably overlies the Moenkopi. The Chiule consists of multicolored claystone, mudstone, siltstone, sandstone, and conglomerate. Some of the sandstone units yield small amounts of water, usually of a quality unsuitable for domestic use. The Wingate Sandstone is about 250 feet thick and is present only in the extreme northeastern corner of the area. It consists of intercalated, reddish-brown sandstone and siltstone and does not contain water. The Upper Cretaceous rocks comprise the Dakota Sandstone, from 50 to 115 feet thick; the Mancos Shale, about 150 feet thick; and the Mesaverde Group, as much as 200 feet thick. These rocks consist of yellowish-gray, light-green, and reddish-brown sandstone and carbonaceous siltstone. Some of the sandstone units contain water of suitable quality for domestic use, and wells in these units yield from 10 to 1,000 gpm. Sedimentary rocks of Eocene(?) age are about 800 feet thick and unconformably overlie Cretaceous rocks. They consist of light-brown and medium-red conglomerate, sandstone, and siltstone. These sedimentary rocks contain small amounts of water suitable for domestic use and yield from 10 to 25 gpm in the Springerville area. The Datil Formation of Miocene(?) Tertiary age consists of more than 800 feet of sedimentary rocks, which are composed largely of volcanic fragments. The Datil Formation does not contain water in the one small area where it crops out. The Bidahochi Formation of Pliocene age consists of 0 to 800 feet of white, green, and brown claystone, mudstone, and sandstone. Locally it yields from 10 to 50 gpm of water suitable for domestic use. Quaternary rocks consist of as much as 500 feet of alluvium, sand, gravel, travertine, cinders, and lava. The alluvium along the large drainages contains water that differs in quality from place to place. In most areas where it occurs, the lava

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J. P. Akers. 1965. Geology and ground water in the central part of Apache County, Arizona. https://doi.org/10.3133/wsp1771

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Basic ground-water hydrology

Ground water is one of the Nation's most valuable natural resources. It is the source of about 40 percent of the water used for all purposes exclusive of hydropower generation and electric powerplant cooling. Surprisingly, for a resource that is so widely used and so important to the health and to the economy of the country, the occurrence of ground water is not only poorly understood but is also, in fact, the subject of many widespread misconceptions. Common misconceptions include the belief that ground water occurs in underground rivers resembling surface streams whose presence can be detected by certain individuals. These misconceptions and others have hampered the development and conservation of ground water and have adversely affected the protection of its quality. In order for the Nation to receive maximum benefit from its ground-water resource, it is essential that everyone, from the rural homeowner to managers of industrial and municipal water supplies to heads of Federal and State water-regulatory agencies, become more knowledgeable about the occurrence, development, and protection of ground water. This report has been prepared to help meet the needs of these groups, as well as the needs of hydrologists, well drillers, and others engaged in the study and development of ground-water supplies. It consists of 45 sections on the basic elements of ground-water hydrology, arranged in order from the most basic aspects of the subject through a discussion of the methods used to determine the yield of aquifers to a discussion of common problems encountered in the operation of ground-water supplies. Each section consists of a brief text and one or more drawings or maps that illustrate the main points covered in the text. Because the text is, in effect, an expanded discussion of the illustrations, most of the illustrations are not captioned. However, where more than one drawing is included in a section, each drawing is assigned a number, given in parentheses, and these numbers are inserted at places in the text where the reader should refer to the drawing. In accordance with U.S. Geological Survey policy to encourage the use of metric units, these units are used in most sections. In the sections dealing with the analysis of aquifer (pumping) test data, equations are given in both consistent units and in the inconsistent inch-pound units still in relatively common use among ground-water hydrologists and well drillers. As an aid to those who are not familiar with metric units and with the conversion of ground-water hydraulic units from inch-pound units to metric units, conversion tables are given on the inside back cover. Definitions of ground-water terms are given where the terms are first introduced. Because some of these terms will be new to many readers, abbreviated definitions are also given on the inside front cover for convenient reference by those who wish to review the definitions from time to time as they read the text. Finally, for those who need to review some of the simple mathematical operations that are used in ground-water hydrology, a section on numbers, equations, and conversions is included at the end of the text.

Water Supply Paper

Validation of a numerical modeling method for simulating rainfall-runoff relations for headwater basins in western King and Snohomish Counties, Washington

The validity of a previously determined numerical modeling method was assessed. Numerical models for 11 drainage basins were constructed with the Hydrologic Simulation Program-FORTRAN (HSPF) with parameter values that were generalized for the physiographic region. Large and recurrent simulation errors were initially identified, but three systematic modifications of the models corrected those errors for 10 out of the 11 basins. The validity of the numerical modeling method for simulating rainfall-runoff relations in the study area, as modified during this investigation, was not rejected, but observed streamflow data were needed to apply the method.

Water Supply Paper

Sediment-quality assessment of Franklin D. Roosevelt Lake and the upstream reach of the Columbia River, Washington, 1992

Elevated concentrations of trace elements were found in bed sediment of Lake Roosevelt and the Columbia River, its principal source of inflow. Trace-element concentrations in whole water samples did not exceed criteria for freshwater organisms. Bed sediments of Lake Roosevelt were analyzed for organic compounds associated with wood-pulp waste. Dioxins and furans were found in suspended sediment and water of the Columbia River. Abundance and diversity of benthic invertebrate communities were analyzed.

Water Supply Paper