Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Sedimentary Record”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40Linked to original sources

Time-slice maps showing age, distribution, and style of deformation in Alaska north of 60° N.

The structural architecture of Alaska is the product of a complex history of tectonism that occurred along the Cordilleran and Arctic margins of North America through interactions with ancient and modern ocean plates and with continental elements derived from Laurentia, Siberia, and Baltica. To unravel the tectonic history of Alaska, we constructed maps showing the age, distribution, structural style, and kinematics of contractional and penetrative extensional deformation in Alaska north of latitude 60° N. at a scale of 1:5,000,000. These maps use the Geologic Map of the Arctic (Harrison and others, 2011) as a base map and follow the guidelines in the Tectonic Map of the Arctic project (Petrov and others, 2013) for construction, including use of the International Commission on Stratigraphy time scale (Cohen and others, 2013) divided into 20 time intervals. We find evidence for deformation in 14 of the 20 time intervals and present maps showing the known or probable extent of deformation for each time interval. Maps and descriptions of deformational style, age constraints, kinematics, and information sources for each deformational episode are discussed in the text and are reported in tabular form. This report also contains maps showing the lithologies and structural geology of Alaska, a terrane map, and the distribution of tectonically important units including post-tectonic sedimentary basins, accretionary complexes, ophiolites, metamorphic rocks. These new maps show that most deformational belts in Alaska are relatively young features, having developed during the late Mesozoic and Cenozoic. The oldest episode of deformation recognized anywhere in Alaska is found in the basement of the Farewell terrane (~1.75 Ga). Paleozoic and early Mesozoic deformational events, including Devonian deformation in the Arctic Alaska terrane, Pennsylvanian deformation in the Alexander terrane, Permian deformation in the Yukon Composite (Klondike orogeny) and Farewell terranes (Browns Fork orogeny), Early and Late Jurassic deformation in the Peninsular-Wrangellia terranes, and Early Cretaceous deformation in northern Alaska (early Brookian orogeny) show that within-terrane amalgamation events occurred prior to assembly of Alaska. Widespread episodes of deformation in the Late Cretaceous and early Cenozoic, in contrast, affected multiple terranes, indicating they occurred during or following the time of assembly of most of Alaska. The primary deformational event in northern Alaska was the Late Jurassic and Early Cretaceous (early) Brookian orogeny, which affected most terranes north and west of the early Cenozoic Tintina, Victoria Creek, Kaltag, and Poorman dextral-slip faults in central Alaska. In southern Alaska, formation of the southern Alaska accretionary complex (Chugach, Prince William, Yakutat terranes) and associated magmatism in the Peninsular-Wrangellia terrane began near the Triassic-Jurassic boundary and continued episodically throughout the remainder of the Mesozoic and the Cenozoic. The collision of these terranes with the Farewell and Yukon Composite terranes in central Alaska is recorded by contractional deformation that emanated from the intervening basins in the Late Cretaceous. The boundary between northern and central Alaska is constrained to late Early Cretaceous but is enigmatic and not obviously marked by contractional deformation. Early Cenozoic shortening and transpressional deformation is the most widespread event recorded in Alaska and produced the widespread late Brookian orogenic event in northern Alaska. Middle and late Cenozoic shortening and transpression is significant in southern Alaska inboard of the underthrusting Yakutat terrane at the Pacific margin subduction zone as well as in northeastern Alaska.

Alaska↗

Location of the Green Canyon (Offshore Southern Louisiana) Seismic Event of February 10, 2006

We calculated an epicenter for the Offshore Southern Louisiana seismic event of February 10, 2006 (the 'Green Canyon event') that was adopted as the preferred epicenter for the event by the USGS/NEIC. The event is held at a focal depth of 5 km; the focal depth could not be reliably calculated but was most likely between 1 km and 15 km beneath sea level. The epicenter was calculated with a radially symmetric global Earth model similar to that routinely used at the USGS/NEIC for all earthquakes worldwide. The location was calculated using P-waves recorded by seismographic stations from which the USGS/NEIC routinely obtains seismological data, plus data from two seismic exploration arrays, the Atlantis ocean-bottom node array, operated by BP in partnership with BHP Billiton Limited, and the CGG Green Canyon phase VIII multi-client towed-streamer survey. The preferred epicenter is approximately 26 km north of an epicenter earlier published by the USGS/NEIC, which was obtained without benefit of the seismic exploration arrays. We estimate that the preferred epicenter is accurate to within 15 km. We selected the preferred epicenter from a suite of trial calculations that attempted to fit arrival times of seismic energy associated with the Green Canyon event and that explored the effect of errors in the velocity model used to calculate the preferred epicenter. The various trials were helpful in confirming the approximate correctness of the preferred epicenter and in assessing the accuracy of the preferred epicenter, but none of the trial calculations, including that of the preferred epicenter, was able to reconcile arrival-time observations and assumed velocity model as well as is typical for the vast majority of earthquakes in and near the continental United States. We believe that remaining misfits between the preferred solution and the observations reflect errors in interpreted arrival times of emergent seismic phases that are due partly to a temporally extended source-time function and partly to failure of our travel-time model to account for the extremely complicated velocity structure of the sedimentary section in which the event occurred.

Open-File Report↗

Metamorphism and gold mineralization in the Blue Ridge, southernmost Appalachians

Lode gold mineralization in the Blue Ridge of the southernmost Appalachians is hosted by metavolcanic rocks (e.g., Anna Howe mine, AL; Royal Vindicator mine, GA), metaplutonic rocks (e.g., Hog Mountain mine, AL), and metasedimentary rocks (e.g., Lowe, Tallapoosa, and Jones Vein mines, AL). Most gold occurs in synkinematic quartz + or - plagioclase + or - pyrite + or - pyrrhotite + or - chlorite veins localized along polydeformational faults that juxtapose rocks with significantly different peak metamorphic mineral assemblages.Mineralogy, chemistry, and O and H isotope studies suggest that the three types of host rocks have undergone differing amounts and types of alteration during mineralization. Limited wall-rock alteration in metavolcanic- and metasediment-hosted deposits, and relatively extensive wall-rock alteration in granitoid-hosted deposits, suggests that most deposits formed from fluids that were close to equilibrium with metavolcanic and metasedimentary rocks. Stable isotope compositions of the fluids calculated from vein minerals and vein selvages are consistent with a predominantly metasedimentary fluid source, but vary from deposit to deposit (-22 to -47ppm delta D, 4-5ppm, delta 18 O, and 5-7ppm delta 34 S at Anna Howe and Royal Vindicator; -48 to -50ppm delta D, 9-13ppm delta 18 O, and ca. 19ppm delta 34 S at Lowe and Jones Vein; and -22 to -23ppm delta D, 8-11ppm delta 18 O, 9-10ppm delta 34 S, and -6 delta 13 C at Hog Mountain). Silicate mineral thermobarometry of vein, vein selvage, and wall-rock mineral assemblages indicate that mineralization and regional metamorphism occured at greenschist to amphibolite facies (480 degrees + or - 75 degrees C at Anna Howe, 535 degrees + or - 50 degrees C at 6.4 + or - 1 kbars at Lowe, 530 degrees + or - 50 degrees C at 6.9 + or - 1 kbars at Tallapoosa, and 460 degrees + or - 50 degrees C at 5.5 + or - 1 kbars at Hog Mountain). Oxygen isotope fractionation between vein minerals and selvage minerals consistently records equilibration temperatures that are similar to or slightly lower than those estimated from silicate thermometry.Auriferous veins contain numerous fluid inclusions that were emplaced in several stages and can be subdivided into five compositional types based on salt and CO 2 concentrations. Fluid inclusion isochores for early formed inclusions from these veins intercept the pressure and temperature conditions estimated from silicate mineral thermobarometry and stable isotope thermometry, and are compatible with entrapment at those conditions. These fluids exhibit significant variation in salinity (X (sub NaCl equiv ) ) = 0.0-0.2) and CO 2 (X (sub CO 2 ) = 0.0-0.2), suggesting variation in fluid-wall-rock interaction that accompanied gold deposition during declining temperatures. Less abundant and later fluids within the veins are dominantly CO 2 .The association of gold mineralization with structurally controlled concordant and discordant quartz sulfide veins, and the temperatures and pressures of wall-rock alteration and regional metamorphism indicate that the present distribution of gold is a result of metamorphism during progressive D 2 -D 3 deformation. Isotopic data for alteration envelopes date this event as Alleghanian: 279 + or - 14 Ma (K-Ar whole rock) and 343 + or - 18 Ma (K-Ar biotite) at Lowe; and 315 + or - 18 Ma (Rb-Sr whole-rock isochron; 87 Sr/ 86 Sr i = 0.7061 + or - 0.0008) and 294 + or - 16 Ma (K-Ar whole-rock) at Hog Mountain. Available data are compatible with development of the lodes during early Alleghanian overthrusting of allochthons over sedimentary rocks of the autochthonous North American margin. The implication is that the fluids were derived from metasedimentary and/or metavolcanic formations in the lower parts of the crystalline thrust stack (or possibly from underlying autochthonous sedimentary formations), ascended along permeable fault zones, and were emplaced as veins into dilatent areas in and adjacent to the fault zones.

Economic Geology↗

Bedrock geologic map of the Crown Point quadrangle, Essex County, New York, and Addison County, Vermont

The bedrock geology of the 7.5-minute Crown Point quadrangle consists of deformed and metamorphosed Mesoproterozoic gneisses of the Adirondack Highlands unconformably overlain by weakly deformed lower Paleozoic sedimentary rocks of the Champlain Valley. The Mesoproterozoic rocks occur on the eastern edge of the Adirondack Highlands and represent an extension of the Grenville Province of Laurentia. Granulite facies Mesoproterozoic paragneiss, marble, and amphibolite hosted the emplacement of granitic orthogneiss at approximately 1.18–1.15 giga-annum (Ga, billion years before present). The earliest of four phases of deformation (D1) is characterized by gneissosity, rarely preserved F1 isoclinal folds, and migmatite in the host rocks. Subsequent D2 deformation produced a composite penetrative gneissosity, migmatite, and isoclinal F2 folds. Towards the end of D2, felsic magmatism (including the regionally extensive Lyon Mountain Granite Gneiss, abbreviated “LMG”) spread by penetrative migration as semiconcordant alkali feldspar granite sheets subparallel to S2 into previously deformed lithologies. The LMG crystallized at approximately 1.15 Ga and displays synkinematic F2 folds thus constraining the time of D2 deformation. Exhumation during D3 produced F3 folds exhibited in regional domes and basins, such as the Keeney Mountain synform, local reactivation of the S2 foliation, partial melting, metamorphism, metasomatism, iron ore remobilization, and intrusion of magnetite-bearing pegmatite both as layer-parallel sills and crosscutting dikes. D4 created NE- and NW-trending boudinage, local high-grade ductile shear zones, and crosscutting granitic pegmatite dikes. Kilometer (km)-scale lineaments readily observed in lidar data are Ediacaran mafic dikes and Phanerozoic brittle faults. The Paleozoic rocks are part of the Early Cambrian to Late Ordovician great American carbonate bank on the ancient margin of Laurentia. Cambrian-Ordovician stratigraphy records an approximately 1-km-thick section and a transition from synrift clastics to passive margin peritidal carbonate buildups to gradually deeper water subtidal to shelf carbonates during foreland basin development associated with the Taconic orogeny. The Paleozoic rocks are weakly folded and block faulted. Large areas of the Champlain Valley are covered by undifferentiated glacial deposits, some of which contain mapped landslides. The map also shows waste rock piles and tailings from historical mining operations and large areas of artificial fill. This study was undertaken to improve our understanding of the bedrock geology in the Adirondack Highlands, establish a modern framework for 1:24,000-scale bedrock geologic mapping in the Adirondacks, provide a context for historical iron mines in the eastern Adirondacks, and update the stratigraphy of the Champlain Valley in New York and Vermont. This Scientific Investigations Map of the Crown Point 7.5-minute quadrangle consists of a map sheet, an explanatory pamphlet, and a geographic information system database that includes bedrock geologic units, faults, outcrops, and structural geologic information. The map sheet includes a bedrock geologic map, a correlation of map units, a description of map units, an explanation of map symbols, three cross sections, and a simplified surficial geologic map that includes lidar percent slope. The explanatory pamphlet includes a discussion of the geology. The bedrock geologic map on the map sheet is multi-layered and has been designed to enable the user to turn off the surficial map layer to view the concealed bedrock map units.

New York, Vermont↗

Mercury contamination chronologies from Connecticut wetlands and Long Island Sound sediments

Sediment cores were used to investigate the mercury deposition histories of Connecticut and Long Island Sound. Most cores show background (pre-1800s) concentrations (50–100 ppb Hg) below 30–50 cm depth, strong enrichments up to 500 ppb Hg in the core tops with lower Hg concentrations in the surface sediments (200–300 ppb Hg). A sediment core from the Housatonic River has peak levels of 1,500 ppb Hg, indicating the presence of a Hg point source in this watershed. The Hg records were translated into Hg contamination chronologies through 210 Pb dating. The onset of Hg contamination occurred in ~1840–1850 in eastern Connecticut, whereas in the Housatonic River the onset is dated at around 1820. The mercury accumulation profiles show periods of peak contamination at around 1900 and at 1950–1970. Peak Hg* (Hg*= Hg measured minus Hg background) accumulation rates in the salt marshes vary, dependent on the sediment character, between 8 and 44 ng Hg/cm 2 per year, whereas modern Hg* accumulation rates range from 4–17 ng Hg/cm 2 per year; time-averaged Hg* accumulation rates are 15 ng Hg/cm 2 per year. These Hg* accumulation rates in sediments are higher than the observed Hg atmospheric deposition rates (about 1–2 ng Hg/cm 2 per year), indicating that contaminant Hg from the watershed is focused into the coastal zone. The Long Island Sound cores show similar Hg profiles as the marsh cores, but time-averaged Hg* accumulation rates are higher than in the marshes (26 ng Hg/cm 2 a year) because of the different sediment characteristics. In-situ atmospheric deposition of Hg in the marshes and in Long Island Sound is only a minor component of the total Hg budget. The 1900 peak of Hg contamination is most likely related to climatic factors (the wet period of the early 1900s) and the 1950–1970 peak was caused by strong anthropogenic Hg emissions at that time. Spatial trends in total Hg burdens in cores are largely related to sedimentary parameters (amount of clay) except for the high inventories of the Housatonic River, which are related to Hg releases from hat-making in the town of Danbury. Much of the contaminated sediment transport in the Housatonic River Basin occurs during floods, creating distinct layers of Hg-contaminated sediment in western Long Island Sound. The drop of about 40% in Hg accumulation rates between the 1960s and 1990s seems largely the result of reduced Hg emissions and to a much lesser extent of climatic factors.

Conference Paper↗

Geology and ground-water resources of Hays County, Texas

The Edwards limestone of Early Cretaceous age is the chief aquifer for San Marcos Springs and about 160 other springs and wells in Hays County, along the Balcones fault zone in South-central Texas. Hays County is underlain by a basement of Paleozoic rocks; and in the southeastern part of the county the Hosston and Sligo formations of Early Cretaceous age, correlative with the Coahuila series of Mexico, have been encountered in the subsurface. Rocks exposed in the county are principally Cretaceous and Quaternary sedimentary units, which are assigned to the Trinity, Fredericksburg, and Washita groups in the Comanche series; the Eagle Ford shale, Austin chalk, Taylor marl, and Navarro group in the Gulf series: and the Leona formation and equivalent rocks in the Pleistocene series. Recent alluvium and colluvium locally overlie the older rocks. In addition to the Edwards limestone in the Fredericksburg group, waterbearing rock units in Hays County include the Pearsall formation (Travis Peak of outcrop areas) and the Glen Rose limestone in the Trinity group, the Austin chalk and Taylor marl, and the Quaternary rocks. The surface slope and regional dip are toward the southeast. Several normal strike faults have displaced the Cretaceous rocks downward to the southeast, the aggregate displacement being about 1,700 feet within the county. The boundaries of the Edwards limestone ground-water reservoir are formed by major faults which are the major controls of movement of water. Much of the water discharged at San Marcos Springs is derived from influent seepage from streams and infiltration from precipitation in recharge areas southwest of Hays County. The average underground inflow from Comal County through the Edwards limestone reservoir is estimated as 70,000 acre-feet per year for the period 1934-47. The discharge of San Marcos Springs, averaging about 55 million gallons a day during 1955, greatly exceeds local ground-water recharge within Hays County. Depth to water, direction of movement of water, subsurface location of aquifers, and quality of water in Hays County have been determined from records of 519 wells and springs, drillers' logs of 49 wells, periodic water-level measurements in about 70 wells, and chemical analyses of water samples from 238 wells and springs. Ground water from wells in the Pearsall formation generally contains less than 500 parts per million of dissolved solids. Water from the Glen Rose limestone in some places contains more than 500 parts per million of sulfate and more than 1,000 parts per million of dissolved solids; locally it is high in nitrate also. Except in the southeastern part of the county, water from the Edwards limestone is commonly very hard but is otherwise of good quality for most uses. Analyses of two water samples from the Austin chalk indicate a high content of bicarbonate. Water from the Taylor marl and from Quaternary sediments generally is hard, and locally it contains excessive nitrate. Most wells in Hays County are used for domestic and stock supplies. About 20 wells, most of them in the Edwards limestone, yield water in relatively large amounts for industrial use, irrigation, or public supplies.

Water Supply Paper↗

Downhill from Austin and Ely to Las Vegas: U-Pb detrital zircon suites from the Eocene–Oligocene Titus Canyon Formation and associated strata, Death Valley, California

In a reconnaissance investigation aimed at interrogating the changing topography and paleogeography of the western United States prior to Basin and Range faulting, a preliminary study made use of U-Pb ages of detrital zircon suites from 16 samples from the Eocene–Oligocene Titus Canyon Formation, its overlying units, and correlatives near Death Valley. The Titus Canyon Formation unconformably overlies Neoproterozoic to Devonian strata in the Funeral and Grapevine Mountains of California and Nevada. Samples were collected from (1) the type area in Titus Canyon, (2) the headwaters of Monarch Canyon, and (3) unnamed Cenozoic strata exposed in a klippe of the Boundary Canyon fault in the central Funeral Mountains. Red beds and conglomerates at the base of the Titus Canyon Formation at locations 1 and 2, which contain previously reported 38–37 Ma fossils, yielded mostly Sierran batholith–age detrital zircons (defined by Triassic, Jurassic, and Cretaceous peaks). Overlying channelized fluvial sandstones, conglomerates, and minor lacustrine shale, marl, and limestone record an abrupt change in source region around 38–36 Ma or slightly later, from more local, Sierran arc–derived sediment to extraregional sources to the north. Clasts of red radiolarian-bearing chert, dark radiolarian chert, and quartzite indicate sources in the region of the Golconda and Roberts Mountains allochthons of northern Nevada. Sandstones intercalated with conglomerate contain increasing proportions of Cenozoic zircon sourced from south-migrating, caldera-forming eruptions at the latitude of Austin and Ely in Nevada with maximum depositional ages (MDAs) ranging from 36 to 24 Ma at the top of the Titus Canyon Formation. Carbonate clasts and ash-rich horizons become more prevalent in the overlying conglomeratic Panuga Formation (which contains a previously dated 15.7 Ma ash-flow tuff). The base of the higher, ash-dominated Wahguyhe Formation yielded a MDA of 14.4 Ma. The central Funeral Mountains section exposes a different sequence of units that, based on new data, are correlative to the Titus Canyon, Panuga, and Wahguyhe Formations at locations 1 and 2. An ash-flow tuff above its (unexposed) base provided a MDA of 34 Ma, and the youngest sample yielded a MDA of 12.7 Ma. The striking differences between age-correlative sections, together with map-based evidence for channelization, indicate that the Titus Canyon Formation and overlying units likely represent fluvial channel, floodplain, and lacustrine deposits as sediments mostly bypassed the region, moving south toward the Paleogene shoreline in the Mojave Desert. The profound changes in source regions and sedimentary facies documented in the Titus Canyon Formation took place during ignimbrite flareup magmatism and a proposed eastward shift of the continental divide from the axis of the Cretaceous arc to a new divide in central Nevada in response to thermal uplift and addition of magma to the crust. This uplift initiated south-flowing fluvial systems that supplied sediments to the Titus Canyon Formation and higher units.

Arizona, California, Nevada, Utah↗

Early Tertiary exhumation of the flank of a forearc basin, southwest Talkeetna Mountains, Alaska

New geochronologic and thermochronologic data from rocks near Hatcher Pass, southwest Talkeetna Mountains, Alaska, record earliest Paleocene erosional and structural exhumation on the flank of the active Cook Inlet forearc basin. Cretaceous plutons shed sediments to the south, forming the Paleocene Arkose Ridge Formation. A Paleocene(?)-Eocene detachment fault juxtaposed ~60 Ma metamorphic rocks with the base of the Arkose Ridge Formation. U-Pb (analyzed by Sensitive High Resolution Ion Micro Probe Reverse Geometry (SHRIMP-RG)) zircon ages of the Cretaceous plutons, more diverse than previously documented, are 90.3±0.3 (previously considered a Jurassic unit), 79.1±1.0, 76.1±0.9, 75.8±0.7, 72.5±0.4, 71.9±0.3, 70.5±0.2, and 67.3±0.2 Ma. The cooling of these plutons occurred between 72 and 66 Ma (zircon fission track (FT) closure ~225°C). 40 Ar/ 39 Ar analyses of hornblende, white mica, and biotite fall into this range (Harlan and others, 2003). New apatite FT data collected on a west-to-east transect reveal sequential exhumation of fault blocks at 62.8±2.9, 54±2.5, 52.6±2.8, and 44.4±2.2 Ma. Plutonic clasts accumulated in the Paleocene Arkose Ridge Formation to the south. Detrital zircon (DZ) ages from the formation reflect this provenance: a new sample yielded one grain at 61 Ma, a dominant peak at 76 Ma, and minor peaks at 70, 80, 88, and 92 Ma. The oldest zircon is 181 Ma. Our apatite FT ages range from 35.1 to 50.9 Ma. Greenschist facies rocks now sit structurally between the plutonic rocks and the Arkose Ridge Formation. They are separated from plutonic rocks by the vertical Hatcher Pass fault and from the sedimentary rocks by a detachment fault. Ar cooling ages (Harlan and others, 2003) and new zircon FT ages for these rocks are concordant at 61-57 Ma, synchronous with deposition of the Arkose Ridge Formation. A cooling age of ~46 Ma came from one apatite FT sample. The metamorphic protolith (previously considered Jurassic) was deposited at or after 75 Ma based on new DZ data. The probability curve has a major peak from 76 to 102 Ma, minor peaks at 186, 197, 213, 303, 346, and 1,828, and two discordant grains at ~2,700 Ma. This is similar to DZ populations in the Valdez Group. The short period of time between deposition, metamorphism, and exhumation are consistent with metamorphism in a subduction-zone setting. Ductile and brittle structures in the metamorphic rocks are consistent with exhumation in a transtensional setting.

Alaska↗

Depositional controls on detrital zircon provenance: An example from upper Cretaceous strata, southern Patagonia

Understanding how depositional environments within a sedimentary system redistribute and sequester sediment is critical for interpreting basin-scale provenance trends. However, sedimentary source-to-sink models commonly examine temporal changes and do not consider how variation in sedimentation processes across a dispersal pathway may result in contrasting provenance signatures. In this paper, we demonstrate a down-paleoslope shift in detrital zircon provenance signatures correlated with shallow-marine lithofacies patterns from the Upper Cretaceous La Anita Formation and underlying continental slope lithofacies of the Alta Vista Formation (Magallanes-Austral Basin, southern Patagonia). New stratigraphic, sedimentologic, and lithofacies analysis results from the La Anita Formation suggest an upward shoaling succession, from a (i) storm-influenced shoreface, (ii) fluvially-dominated, wave-influenced delta, and a (iii) high-energy, gravelly foreshore. Stratigraphic sections are paired with U-Pb detrital zircon sandstone samples (N = 20; n = 5219), which provide both maximum depositional ages and provenance characteristics. While all samples contain abundant zircon derived from the Andean volcanic arc (ca. 145–75 Ma), the amount from both Jurassic distal volcanic massifs (ca. 188–162 Ma) and recycled orogenic sources exhumed during the advance of the Cretaceous fold-and-thrust belt (>200 Ma; 157–142 Ma) vary with changes in depositional environment. We argue that down-paleoslope, systematic enriching of local fold-and-thrust belt material within the La Anita Formation is reflective of progressive mixing of grains transported via shallow-marine processes, while distally enriched fluvio-deltaic transported zircons were sourced from large, regional catchments. This suggests that competition between transport processes across a shallow and marginal marine sequence of rocks affects the resulting provenance signatures recorded within a single stratigraphic succession. These data also detail the degree of sediment pathway connectivity between shallow-marine sources and deep-marine sinks. Detrital zircon results from muddy continental slope facies of the Alta Vista Formation are made up entirely locally derived material, while zircon results from deep-water, sand-rich channel facies of the Formation are indistinguishable from coeval fluvio-deltaic zircon signatures. This implies that continental shelf-to-slope connectivity in a sediment dispersal system, via submarine canyons or shelf-edge delta progradation, is necessary for detrital zircon distributions from the shallow-marine realm to propagate into the deeper marine.

Patagonia↗

Geology and ground-water resources of the Ahtanum Valley, Yakima County, Washington

The Ahtanum Valley covers an area of about 100 square miles in an important agricultural district in central Yakima County, Wash. Because the area is semiarid, virtually all crops require irrigation. Surface-water supplies are inadequate in most of the area, and ground water is being used increasingly for irrigation. The purpose of this investigation was the collection and interpretation of data, pertaining to ground water in the area as an aid in the proper development and management of the water resources. The occurrence and movement of ground water in the Ahtanum Valley are directly related to the geology. The valley occupies part of a structural trough (Ahtanum-Moxee subbasin) that is underlain by strongly folded flow layers of a thick sequence of the Yakima basalt. The upper part of the basalt sequence interfingers with, and is conformably overlying by, sedimentary rocks of the Ellensburg formation which are as much as 1,000 feet thick. These rocks are in turn overlying unconformably by cemented basalt gravel as much as 400 feet thick. Unconsolidated alluvial sand and gravel, as much as 30 feet thick, form the valley floor. Although ground water occurs in each of the rock units within the area, the Yakima basalt and the unconsolidated alluvium yield about three-fourths of the ground water currently used. Wells in the area range in depth from a few feet to more than 1,200 feet and yield from less than 1 to more than 1,030 gallons per minute. Although water levels in water-table wells usually are shallow--often less than 5 feet below the land surface--levels in deeper wells tapping confined water range from somewhat above the land surface (in flowing wells) to about 200 feet below. Wells drilled into aquifers in the Yakima basalt, the Ellensburg formation, and the cemented gravel usually tap confined water, and at least 12 wells in the area flow or have flowed in the past. Ground-water levels fluctuate principally in response to changes in stream levels, variations in the flow of irrigation ditches and in rates of water application, variations in local precipitation, and seasonal differences in withdrawals from wells. Annual fluctuations of levels generally are less than 10 feet except in localities of heavy pumping. Periodic measurements of water levels in two observation wells in the area indicate, locally at least, a persistent decline in artesian pressures in confined basalt aquifers, although the record is too short to show whether withdrawal by pumping has reached, or is nearing, an optimum balance with recharge. The aquifers are recharged by precipitation, by infiltration from streams, and by ground-water underflow into the area. Ground water is discharged by seepage to streams, by evapotranspiration, by springs and seeps at the land surface, and, artificially, by withdrawal from wells. It is estimated that the seepage discharge to the Yakima River from the area studied may range from about 20,000 to 25,000 acre-feet per year. The consumptive waste of ground water by phreatophytes probably exceeds 4,000 acre-feet per year and may represent a large reclaimable source of water in the area. The annual withdrawal of ground water from wells in the area for domestic, industrial, irrigation, public, and stock supplies is estimated to be 6,300 acre-feet. The chemical quality of the ground water generally is satisfactory for most purposes, although the water from many wells is harder than is desirable for domestic use.

Washington↗

Water resources of the Clarion River and Redbank Creek basins, northwestern Pennsylvania

The Clarion River and Redbank Creek basin occupy 1,280 and 545 square miles, respectively, in northwatern Pennsylvania. The area is mostly in Clerion, Elk, and Jefferson Counties and is approximately 70 miles long and 30 miles wide. All drainage is to the Allegheny River. Sedimentary rocks of Late Devionian Early Mississippian, and Pennsylvanian age underlie the area. Rocks of Late Devonian age underlie the entire area and crop out in the deep stream valleys in the north. Lower Mississippian rocks generally crop out in strips along major stream valleys; the strips are narrow in the south and broaden northward. Pennsylvanian rocks cover most of the interfluvial areas between major streams. The Upper Devonian and Lower Mississippian rocks are composed mostly of alternating sandstone and shale. Sandstone may intertongue laterally with shale. The Pennsylvanian rocks are most heterogeneous and contain many commercial coal beds. The major mineral resources are bituminous coal, petroleum, and natural gas. Narly all coal production is from strip mining in Clarion, Elk, and Jefferson Counties. Total coal production exceeded 8 million short tons in 1976. The basins are south and east of the major oil-producing regions in Pennsylvania, but more than 50,000 barrels of crude oil were produced here in 1975. Commercial quantities of natural gas are also obtained. Thirty-three public water-supply systems furnish about two-thirds of the water for domestic use. Surface water is the source of about 90 percent of public-supply water. The remainder is from wells and springs. In an average year, 64 percent of the precipitation in the Clarion River basin and 60 percent in the Redbank Creek basin leave the area as streamflow. The percentage of annuual discharge from each basin that is base runoff averaged 53 and 51 percent, respectively, during 1972-75. Only 4 of 10 stream-gaging stations recorded an average 10-year, 7-consecutive day low flow of at least 0.15 cubic feet per second per square mile. Most wells are completed on bedrock. Yields of bedrock wells are affected mostly by rock type, type of overburden, topography, depth of water-bearing zones, and by the rate and duration of pumping. Water in the bedrock occurs chiefly along fractures and bedding planes. Most wells get water from several zones. Yielding zones occur less frequently as depth increases, but are reported as much as 400 feet below land surface. Optimum well depth is about 350 feet. Well yields range from less than 1 to more than 550 gallons per minute. The best bedrock aquifers are the Lower Mississippian rocks, which have a median specific capacity of 4.3 gallons per minute per foot of drawdown compared to median between 0.38 and 0.67 in the Conemaugh, Allegheny, and Pottsville Groups. The major water-qualitty problems are due to high concentrations of iron, manganese, hardness, and acidity. Some of these problems are related to coal mining that has degraded water quality in parts of Clarion, Clearfield, Elk, and Jefferson Counties. Water-quality problems result from the rock composition. Many streams have low alkalinity concentrations and, consequently, have little capacity to neutralize the acid water from coal mines. Large forested areas, with little development, in Elk, Forest, and Jefferson Counties, have good quality water. The water from over three-quarters of the bedrock wells sampled has dissolved-solids concentratins less than 250 milligrams per liter. Water from aqufers of Pennsylvanian age is generally lower in dissolved solids than that from Lower Mississippian aquifers. Salt water is not a problem, except locally in Devonian rocks. Water from wells on hilltops is generally of better quality than that from wells in valleys (median dissolved solids 140 versus 340 millgrams per liter). In many valleys in Clarion and Jefferson Counties, old abandoned flowing oil and gas wells contribute high

Open-File Report↗

Sedimentation and tectonics of the Sylhet trough, Bangladesh

The Sylhet trough, a sub-basin of the Bengal Basin in northeastern Bangladesh, contains a thick fill (12 to 16 km) of late Mesozoic and Cenozoic strata that record its tectonic evolution. Stratigraphic, sedimentologic, and petrographic data collected from outcrops, cores, well logs, and seismic lines are here used to reconstruct the history of this trough. The Sylhet trough occupied a slope/basinal setting on a passive continental margin from late Mesozoic through Eocene time. Subsidence may have increased slightly in Oligocene time when the trough was located in the distal part of a foreland basin paired to the Indo-Burman ranges. Oligocene fluvial-deltaic strata (Barail Formation) were derived from incipient uplifts in the eastern Himalayas. Subsidence increased markedly in the Miocene epoch in response to western encroachment of the Indo-Burman ranges. Miocene to earliest Pliocene sediments of the Surma Group were deposited in a large, mud-rich delta system that may have drained a significant proportion of the eastern Himalayas. Subsidence rates in the Sylhet trough increased dramatically (3-8 times) from Miocene to Pliocene-Pleistocene time when the fluvial Tipam Sandstone and Dupi Tila Formation were deposited. This dramatic subsidence change is attributed to south-directed overthrusting of the Shillong Plateau on the Dauki fault for the following reasons. (1) Pliocene and Pleistocene strata thin markedly away from the Shillong Plateau, consistent with a crustal load emplaced on the northern basin margin. (2) The Shillong Plateau is draped by Mesozoic to Miocene rocks, but Pliocene and younger strata are not represented, suggesting that the massif was an uplifted block at this time. (3) South-directed overthrusting of the Shillong Plateau is consistent with gravity data and with recent seismotectonic observations. Sandstone in the Tioam has a marked increase in sedimentary lithic fragments compared to older rocks, reflecting uplift and erosion of the sedimentary cover of the Shillong Plateau. If the Dauki fault has a dip similar to that of other Himalayan overthrusts, then a few tens of kilometers of horizontal tectonic transport would be required to carry the Shillong Plateau to its present elevation. Uplift of the Shillong Plateau probably generated a major (∼300 km) westward shift in the course of the Brahmaputra River.

Geological Society of America Bulletin↗

Processes that initiate turbidity currents and their influence on turbidites: A marine geology perspective

How the processes that initiate turbidity currents influence turbidite deposition is poorly understood, and many discussions in the literature rely on concepts that are overly simplistic. Marine geological studies provide information on the initiation and flow path of turbidity currents, including their response to gradient. In case studies of late Quaternary turbidites on the eastern Canadian and western U.S. margins, initiation processes are inferred either from real-time data for historical flows or indirectly from the age and contemporary paleogeography, erosional features, and depositional record. Three major types of initiation process are recognized: transformation of failed sediment, hyperpycnal flow from rivers or ice margins, and resuspension of sediment near the shelf edge by oceanographic processes. Many high-concentration flows result from hyperpycnal supply of hyperconcentrated bedload, or liquefaction failure of coarse-grained sediment, and most tend to deposit in slope conduits and on gradients < 0.5° at the base of slope and on the mid fan. Highly turbulent flows, from transformation of retrogressive failures and from ignitive flows that are triggered by oceanographic processes, tend to cannibalize these more proximal sediments and redeposit them on lower gradients on the basin plain. Such conduit flushing provides most of the sediment in large turbidites. Initiation mechanism exerts a strong control on the duration of turbidity flows. In most basins, there is a complex feedback between different types of turbidity-current initiation, the transformation of the flows, and the associated slope morphology. As a result, there is no simple relationship between initiating process and type of deposit.

Journal of Sedimentary Research↗

Settlement of the USS Arizona, Pearl Harbor, Hawaii

The U.S. Geological Survey, in collaboration with the National Park Service Submerged Resources Center, undertook investigations at the USS Arizona Memorial at Pearl Harbor, Hawaii, in 2002, 2003, and 2005 to characterize geological factors affecting the deterioration and movement of the hull of the USS Arizona. Since sinking on the morning of December 7, 1941, the hull of the USS Arizona has been slowly but steadily disappearing below the surface of Pearl Harbor. Continuous sediment coring at three of four locations around the hull of the Arizona was only partially successful, but it was sufficient to identify a varied sedimentary substrate beneath the hull. A boring near the stern reveals a thick, continuous sequence of soft, gray clay to the bottom of the boring. In contrast, borings near the bow and starboard side, below about 5 meters subbottom depth, indicate the presence of very stiff, brown clay and coral debris and an absence of soft clay. Multisensor core logger scanning of the recovered cores distinguishes the lower density of the soft, gray clay at the stern from the higher density of the stiff, brown clays and coral debris at the bow and starboard side. Uniaxial consolidation testing of the soft gray clay indicates a normally consolidated sequence, whereas the stiff, brown clay and coral debris are overconsolidated. Profiles of shear wave velocity vs. depth obtained through spectral analysis of interface wave testing around the perimeter of the hull in 2005 identified areas of higher velocity, stiffer sediment at the bow and starboard side, which correspond to the dense, stiff clay recovered near the bow and starboard borings. Low shear-wave velocities at the port midship and quarter of the hull correlate with the lower density, softer sediment recovered from the boring at the stern. Cross sections of the subbottom of the Memorial combine results from the sediment borings and geophysical surveys and depict a wedge of soft clay unconformably overlying the stiff clays and coral debris beneath the aft half of the USS Arizona and thickening toward the stern. The 2008 position of the hull has been documented using both tide-based and differential Global Positioning System (GPS) measuring systems. Analysis of historical and recent photographs was done to create a record of settlement from the time of sinking in 1941 to the present. By examining shadows in suitable photos, the sun azimuth, local time of day, and tide levels were determined to derive tide-adjusted and sea-level-rise-corrected elevations for structures on the hull and from these elevations to obtain settlement and tilt trends. The settlement trends, most complete for barbette 3, have two components. An early, nonlinear component ends on December 9, 1941, and represents the initial penetration and displacement of the bottom sediment by the hull. A linear, long-term trend of normal consolidation continues to the present day. Long-term settlement rates are greatest at the stern and decrease linearly to the midship, showing that the aft half of the hull is moving as an intact, rigid body. The recent rate of settlement at the stern is about 3.5 mm/year; rates at the starboard midship and forward part of the hull are less than one-third of the stern rate. The aft half of the USS Arizona hull presently tilts about 2 degrees to port, an increase of at least 1.5 degrees since the initial sinking of the ship. The results of this study identify differential settlement of the Arizona hull, due to the wedge of soft clay underlying the aft half of the hull, as the cause of the movement of the hull beneath the surface of Pearl Harbor. Calculation of sediment consolidation using lab-determined properties of the soft clay demonstrates that the observed settlements can be reproduced by projecting appropriate clay thicknesses beneath the hull. Several of the high-quality photographs analyzed for the historical settlement analysis highlight some of the limitations of this retrospective technique for determining tide-based elevations. In these cases, calculated structure elevations do not conform to the settlement trend, indicating that there can be complicating factors affecting the interpretation of the photos. Conflicting dates for events during the salvage operations were also encountered.

Hawai'i↗

Geology and water resources of the northern portion of the Black Hills and adjoining regions in South Dakota and Wyoming

This paper, which supplements the report on the geology and water resources of the southern half of the Black Hills, published in 1901, is the result of studies made at intervals during the years 1899 to 1907. It relates to an area of about 7,500 square miles, situated about half in South Dakota and half in the northeast corner of Wyoming (Pl. II), and covering the northern half of the Black Hills uplift and a wide area of adjacent plains. The report describes the geology of the sedimentary rocks - their stratigraphy, structure, and history - and discusses their mineral resources, including underground water, coal, gypsum, etc. It also contains information respecting surface waters available for irrigation and stock raising, timber, climate, and the history of the topographic development of the region. The crystalline rocks of the central portion of the Black Hills area and the various igneous rocks of later age are shown on some of the accompanying maps but without differentiation, as the study of their geology was not within the scope of the investigation; neither are their mineral resources considered here, for these are treated in other publications. In the field work I have been assisted mainly by Prof. C. C. O'Harra, of the School of Mines at Rapid, who has mapped the geology of large areas about Aladdin, the Devils Tower, Belle Fourche, and Rapid. Dr. W. S. Tangier Smith has mapped portions of the Bear Lodge and Nigger Hill uplifts, and Mr. C. A. Fisher has assisted in portions of the work. The geology of the region from Sturgis to a point beyond Spearfish Canyon was mapped by Prof. T. A. Jaggar, jr., with the assistance of Mr. J. M. Boutwell, in 1898 and 1899. It is desirable to repeat here the statement made in my previous report that all who study the geology of the Black Hills must feel impressed by the remarkably clear general conceptions of the geologic relations of this region afforded by the survey made by Mr. Henry Newton over a quarter of a century ago. In one short season, with many unfavorable conditions for traveling, he determined most of the broader features and recorded many of the essential details. His posthumous report, edited by Mr. G. K. Gilbert, will always remain a standard work on Black Hills geology. Later studies have added greatly to our knowledge of the details of the stratigraphy and structure, the distribution of the rocks and minerals, and the age of the beds, and have afforded means for a more complete elucidation of the geologic history, especially the physiographic development of the Black Hills region.

South Dakota, Wyoming↗

Shallow Groundwater Movement in the Skagit River Delta Area, Skagit County, Washington

Shallow groundwater movement in an area between the lower Skagit River and Puget Sound was characterized by the U.S. Geological Survey to assist Skagit County and the Washington State Department of Ecology with the identification of areas where water withdrawals from existing and new wells could adversely affect streamflow in the Skagit River. The shallow groundwater system consists of alluvial, lahar runout, and recessional outwash deposits composed of sand, gravel, and cobbles, with minor lenses of silt and clay. Upland areas are underlain by glacial till and outwash deposits that show evidence of terrestrial and shallow marine depositional environments. Bedrock exposures are limited to a few upland outcrops in the southwestern part of the study area, and consist of metamorphic, sedimentary, and igneous rocks. Water levels were measured in 47 wells on a quarterly basis (August 2007, November 2007, February 2008, and May 2008). Measurements from 34 wells completed in the shallow groundwater system were used to construct groundwater-level and flow-direction maps and perform a linear-regression analysis to estimate the overall, time averaged shallow groundwater-flow direction and gradient. Groundwater flow in the shallow groundwater system generally moves in a southwestward direction away from the Skagit River and toward the Swinomish Channel and Skagit Bay. Local groundwater flow towards the river was inferred during February 2008 in areas west and southwest of Mount Vernon. Water-level altitudes varied seasonally, however, and generally ranged from less than 3 feet (August 2007) in the west to about 15 feet (May 2008) in the east. The time-averaged, shallow groundwater-flow direction derived from regression analysis, 8.5 deg south of west, was similar to flow directions depicted on the quarterly water-level maps. Seasonal changes in groundwater levels in most wells in the Skagit River Delta follow a typical pattern for shallow wells in western Washington. Water levels rise from October through March, when precipitation is high, and decline from April through September, when precipitation is lower. Groundwater levels in wells along the eastern margin of the study area also are likely influenced by stage on the Skagit River. Water levels in these wells remained elevated through April, and did not seem to begin to decline until the end of May in response to declining river stage. Groundwater levels in a well equipped with a continuous water-level recorder exhibited periodic fluctuations that are characteristic of ocean tides. This well is less than 1 mile east of the tidally influenced Swinomish Channel, and exhibited water-level fluctuations that correspond closely to predicted tidal extremes obtained from a tide gage near La Conner, Washington.

Scientific Investigations Report↗

An improved understanding of the Alaska coastal current: The application of a bivalve growth-temperature model to reconstruct freshwater-influenced paleoenvironments

Shells of intertidal bivalve mollusks contain sub-seasonally to interannually resolved records of temperature and salinity variations in coastal settings. Such data are essential to understand changing land-sea interactions through time, specifically atmospheric (precipitation rate, glacial meltwater, river discharge) and oceanographic circulation patterns; however, independent temperature and salinity proxies are currently not available. We established a model for reconstructing daily water temperatures with an average standard error of ???1.3 ??C based on variations in the width of lunar daily growth increments of Saxidomus gigantea from southwestern Alaska, United States. Temperature explains 70% of the variability in shell growth. When used in conjunction with stable oxygen isotope data, this approach can also be used to identify changes in past seawater salinity. This study provides a better understanding of the hydrological changes related to the Alaska Coastal Current (ACC). In combination with ??18Oshell values, increment-derived temperatures were used to estimate salinity changes with an average error of 1.4 ?? 1.1 PSU. Our model was calibrated and tested with modern shells and then applied to archaeological specimens. As derived from the model, the time interval of 988-1447 cal yr BP was characterized by ???1-2 ??C colder and much drier (2-5 PSU) summers. During that time, the ACC was likely flowing much more slowly than at present. In contrast, between 599-1014 cal yr BP, the Aleutian low may have been stronger, which resulted in a 3 ??C temperature decrease during summers and 1-2 PSU fresher conditions than today; the ACC was probably flowing more quickly at that time. The shell growth-temperature model can be used to estimate seasonal to interannual salinity and temperature changes in freshwater-influenced environments through time. ?? 2011 SEPM (Society for Sedimentary Geology).

Palaios↗

Water resources inventory of Connecticut Part 5: lower Housatonic River basin

The 557 square miles of the lower Housatonic River basin in western Connecticut include the basins of two major tributaries, the Pomperaug and Naugatuck Rivers. Nearly all water is derived from precipitation, which averaged 47 inches per year during 1931-60, In this period an additional 570 billion gallons of water per year entered the basin in the main stem of the Housatonic River at Lake Lillinonah, and some water was imported by water-supply systems from outside the basin. Almost half the precipitation--21.6 inches--was lost from the basin by evapotranspiration. Except for small amounts exported, the remainder discharged as runoff and underflow into Long Island Sound. Variations in streamflow at 6 long-term continuous-record gaging stations are summarized in standardized graphs and tables that can be used to estimate streamflow characteristics at other sites. For example, mean flow and two low-flow characteristics, the 7-day annual minimum flow for 2-year and 10-year recurrence intervals, have been determined for many partial-record stations throughout the basin. Of the 37 principal lakes, ponds, and reservoirs in the basin, 6 have usable storage of more than 1 billion gallons. The “maximum safe draft rate” (described in: “Storage of Water in Lakes and Reservoirs”) of the largest of these, Thomaston Reservoir near Thomaston, is 75.6 million gallons per day for the 10-year and 20-year recurrence intervals of annual lowest mean flow. Floods have occurred during every month, at one time or another. The two greatest floods on the Naugatuck River in historical time occurred 2 months apart in 1955. The larger, in August, had a peak of 106,000 cfs (cubic feet per second) at Beacon Falls. Since then, the likelihood of major floods has been considerably reduced by a program of flood control in the basin. Water can be obtained from three aquifers under-lying the basin-stratified drift, till, and bedrock. Stratified drift covers about 16 percent of the basin, mostly in valleys and lowlands, and its saturated part generally ranges in thickness from 10 feet in small valleys to 200 feet in the Housatonic River valley. Its transmissivity ranges from 0 to 47,000 ft 2 /day (feet shared per day). Till, deposited directly by glacial ice, forms a widespread but discontinuous mantle over bedrock in most upland areas and extends beneath stratified drift in lowlands; it ranges in thickness from 0 to 200 feet. The median value of 31 published determinations of hydraulic conductivity of till in southern New England is 0.67 ft/day and ranges from 0.013 to 29 ft/day. Crystalline bedrock underlies most of the basin and is composed principally of granite, gneiss, and schist. Sedimentary volcanic bedrock underlies only the Pomperaug River basin. Regardless of rock type, water is obtained mostly from fractures. Streambed deposits are significant features of the hydrogeologic system because they affect the amount of water from streams and lakes that can be induced to infiltrate aquifers. Based on field tests, characteristic values of vertical hydraulic conductivity of streambed deposits are 0.40 ft/day for fine-grained deposits and 14 ft/day for gravelly deposits. Ground-water supplies generally range in yield from several millions of gallons per day from large well fields to 1 gpm (gallons per minute) from single wells. Large supplies, with yields of 100 gpm or more from individual wells, are most commonly obtained from stratified drift. Yields to be expected from screened wells tapping this aquifer can be calculated by use of a series of graphs in conjunction with estimates of transmissivity and aquifer thickness. The yields of 14 principal ground-water reservoirs are estimated from aquifer characteristics and also from the amount of water that can be obtained from aquifer storage, from interception or runoff, and from infiltration of streamflow at low-flow conditions, using a hypothetical well-field arrangement for each reservoir. It is assumed that induced infiltration is restricted to an amount equal to the 7-day annual minimum stream-flow for a 2-year recurrence interval. Yields range from 1.4 to 15 mgd (million gallons per day) during periods of no recharge, and from 2.0 to 17 mgd during recharge periods. Small to moderate water supplies can be obtained from any of the aquifers under suitable conditions. For example, data from 294 wells in the basin indicate that yields of a few gallons per minute can be obtained from bedrock at most sites. The likelihood of obtaining an adequate domestic supply is slightly greater in granite than in schist and also is greater where the overburden is stratified drift rather than till. Chemical analyses of precipitation samples collected monthly from five stations in the basin during a 9-month period in 1966 show that rainfall is acidic and that sulfate is the dominant anion, probably because of industrial fumes and smoke within and near the basin. Where unaffected by man’s activities, water in the basin is generally low in dissolved-solids concentration, is of the calcium magnesium bicarbonate type, and is soft to moderately hard. In general, streamflow is less mineralized than ground water, particularly when it consists largely of direct runoff. However, streamflow becomes more highly mineralized during low-flow conditions, when most of it consists of more highly mineralized water discharged from aquifers. The median value of dissolved-solids concentration of water at 22 stream sites was 51 mg/1 (milligrams per liter) during high flow, and 68 mg/1 during low flow within the study period. Iron and manganese occur naturally in objectionable concentrations in parts of the basin, particularly in streams draining swamps and in water from bedrock containing iron and manganese-bearing minerals. Man’s activities have degraded the quality of water in streams in much of the basin, except in the Pomperaug subbasin. In the Naugatuck River basin, the degradation in quality is shown by wide and erratic changes in dissolved-solids concentration, excessive amounts of certain trace elements, a low dissolved oxygen content, and abnormally high temperatures. Ground water is degraded principally by induced infiltration of stream water containing chemical wastes, by wastes stored on the ground and by effluents from septic tanks. Below its confluence with the Naugatuck River, much of the Housatonic River and adjoining marshes, wetlands, and aquifers contain salt water. Measurements of specific conductance during low-flow conditions in 1969 indicate that the dissolved-solids concentration of water in the estuary ranged from 210 mg/1 near Twomile Island to 20,000 mg/1 near Long Island Sound. The quantity and quality of water in the basin are satisfactory for a wide variety of uses, and, with suitable treatment, the water may be used for most purposes. In 1967, the total amount of water used in the basin was about 194 billion gallons. About 90 percent of this was used for industrial purposes, and 95 percent of the industrial water was obtained from surface-water sources. In the same year, 17 municipal and private water-supply systems supplied water of satisfactory quality to about three-fourths of the population.

Connecticut↗