Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Internal Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39Linked to original sources
USGS2024

Getting to the surface of the problem: A dynamic rupture benchmark for shallowly dipping faults near Earth’s surface

The Statewide California Earthquake Center (SCEC) Dynamic Rupture Group workshop “Getting to the Surface of the Problem: A Dynamic Rupture Benchmark for Shallowly-Dipping Faults Near Earth’s Surface” was convened virtually, in an online meeting on November 4, 2024. 52 people participated, including two who sent pre-recorded lightning talks earlier, but were unable to join us that day due to the international time-zone difference. One-half of our participants were students or postdocs, and the group included scientists from 11 countries (USA, Canada, China, Czech Republic, France, Germany, Iceland, Japan, New Zealand, Saudi Arabia, Switzerland).

Final Report↗
USGS2013

An isotope-dilution standard GC/MS/MS method for steroid hormones in water

An isotope-dilution quantification method was developed for 20 natural and synthetic steroid hormones and additional compounds in filtered and unfiltered water. Deuterium- or carbon-13-labeled isotope-dilution standards (IDSs) are added to the water sample, which is passed through an octadecylsilyl solid-phase extraction (SPE) disk. Following extract cleanup using Florisil SPE, method compounds are converted to trimethylsilyl derivatives and analyzed by gas chromatography with tandem mass spectrometry. Validation matrices included reagent water, wastewater-affected surface water, and primary (no biological treatment) and secondary wastewater effluent. Overall method recovery for all analytes in these matrices averaged 100%; with overall relative standard deviation of 28%. Mean recoveries of the 20 individual analytes for spiked reagent-water samples prepared along with field samples analyzed in 2009–2010 ranged from 84–104%, with relative standard deviations of 6–36%. Detection levels estimated using ASTM International’s D6091–07 procedure range from 0.4 to 4 ng/L for 17 analytes. Higher censoring levels of 100 ng/L for bisphenol A and 200 ng/L for cholesterol and 3-beta-coprostanol are used to prevent bias and false positives associated with the presence of these analytes in blanks. Absolute method recoveries of the IDSs provide sample-specific performance information and guide data reporting. Careful selection of labeled compounds for use as IDSs is important because both inexact IDS-analyte matches and deuterium label loss affect an IDS’s ability to emulate analyte performance. Six IDS compounds initially tested and applied in this method exhibited deuterium loss and are not used in the final method.

Book chapter↗
USGS2016

Time-slice maps showing age, distribution, and style of deformation in Alaska north of 60° N.

The structural architecture of Alaska is the product of a complex history of tectonism that occurred along the Cordilleran and Arctic margins of North America through interactions with ancient and modern ocean plates and with continental elements derived from Laurentia, Siberia, and Baltica. To unravel the tectonic history of Alaska, we constructed maps showing the age, distribution, structural style, and kinematics of contractional and penetrative extensional deformation in Alaska north of latitude 60° N. at a scale of 1:5,000,000. These maps use the Geologic Map of the Arctic (Harrison and others, 2011) as a base map and follow the guidelines in the Tectonic Map of the Arctic project (Petrov and others, 2013) for construction, including use of the International Commission on Stratigraphy time scale (Cohen and others, 2013) divided into 20 time intervals. We find evidence for deformation in 14 of the 20 time intervals and present maps showing the known or probable extent of deformation for each time interval. Maps and descriptions of deformational style, age constraints, kinematics, and information sources for each deformational episode are discussed in the text and are reported in tabular form. This report also contains maps showing the lithologies and structural geology of Alaska, a terrane map, and the distribution of tectonically important units including post-tectonic sedimentary basins, accretionary complexes, ophiolites, metamorphic rocks. These new maps show that most deformational belts in Alaska are relatively young features, having developed during the late Mesozoic and Cenozoic. The oldest episode of deformation recognized anywhere in Alaska is found in the basement of the Farewell terrane (~1.75 Ga). Paleozoic and early Mesozoic deformational events, including Devonian deformation in the Arctic Alaska terrane, Pennsylvanian deformation in the Alexander terrane, Permian deformation in the Yukon Composite (Klondike orogeny) and Farewell terranes (Browns Fork orogeny), Early and Late Jurassic deformation in the Peninsular-Wrangellia terranes, and Early Cretaceous deformation in northern Alaska (early Brookian orogeny) show that within-terrane amalgamation events occurred prior to assembly of Alaska. Widespread episodes of deformation in the Late Cretaceous and early Cenozoic, in contrast, affected multiple terranes, indicating they occurred during or following the time of assembly of most of Alaska. The primary deformational event in northern Alaska was the Late Jurassic and Early Cretaceous (early) Brookian orogeny, which affected most terranes north and west of the early Cenozoic Tintina, Victoria Creek, Kaltag, and Poorman dextral-slip faults in central Alaska. In southern Alaska, formation of the southern Alaska accretionary complex (Chugach, Prince William, Yakutat terranes) and associated magmatism in the Peninsular-Wrangellia terrane began near the Triassic-Jurassic boundary and continued episodically throughout the remainder of the Mesozoic and the Cenozoic. The collision of these terranes with the Farewell and Yukon Composite terranes in central Alaska is recorded by contractional deformation that emanated from the intervening basins in the Late Cretaceous. The boundary between northern and central Alaska is constrained to late Early Cretaceous but is enigmatic and not obviously marked by contractional deformation. Early Cenozoic shortening and transpressional deformation is the most widespread event recorded in Alaska and produced the widespread late Brookian orogenic event in northern Alaska. Middle and late Cenozoic shortening and transpression is significant in southern Alaska inboard of the underthrusting Yakutat terrane at the Pacific margin subduction zone as well as in northeastern Alaska.

Alaska↗
USGS2005

Workgroup report: Drinking-water nitrate and health - Recent findings and research needs

Human alteration of the nitrogen cycle has resulted in steadily accumulating nitrate in our water resources. The U.S. maximum contaminant level and World Health Organization guidelines for nitrate in drinking water were promulgated to protect infants from developing methemoglobinemia, an acute condition. Some scientists have recently suggested that the regulatory limit for nitrate is overly conservative; however, they have not thoroughly considered chronic health outcomes. In August 2004, a symposium on drinking-water nitrate and health was held at the International Society for Environmental Epidemiology meeting to evaluate nitrate exposures and associated health effects in relation to the current regulatory limit. The contribution of drinking-water nitrate toward endogenous formation of N-nitroso compounds was evaluated with a focus toward identifying subpopulations with increased rates of nitrosation. Adverse health effects may be the result of a complex interaction of the amount of nitrate ingested, the concomitant ingestion of nitrosation cofactors and precursors, and specific medical conditions that increase nitrosation. Workshop participants concluded that more experimental studies are needed and that a particularly fruitful approach may be to conduct epidemiologic studies among susceptible subgroups with increased endogenous nitrosation. The few epidemiologic studies that have evaluated intake of nitrosation precursors and/or nitrosation inhibitors have observed elevated risks for colon cancer and neural tube defects associated with drinking-water nitrate concentrations below the regulatory limit. The role of drinking-water nitrate exposure as a risk factor for specific cancers, reproductive outcomes, and other chronic health effects must be studied more thoroughly before changes to the regulatory level for nitrate in drinking water can be considered.

Environmental Health Perspectives↗
USGS1956

Summary of reconnaissance for radioactive deposits in Alaska, 1945-1954, and an appraisal of Alaskan uranium possibilities

In the period 1945-1954 over 100 investigations for radioactive source materials were made in Alaska. The nature of these investigations ranged from field examinations of individual prospects or the laboratory analysis of significantly radioactive samples submitted by prospectors to reconnaissance studies of large districts. In this period no deposits of uranium or thorium that would warrant commercial exploitation were discovered. The investigations, however, disclosed that radioactive materials occur in widely scattered areas of Alaska and in widely diverse environments. Many igneous rocks throughout Alaska are weakly radioactive because of uranium- and thorium-bearing accessory minerals, such as allanite, apatite, monazite, sphene, xenotime, and zircon; more rarely the radioactivity of these rocks is due to thorianite or thorite and their uranoan varieties. The felsic rocks, for example, granites and syenites, are generally more radioactive than the mafic igneous rocks. Pegmatites, locally, have also proved to be radioactive, but they have little commercial significance. No primary uranium oxide minerals have been found yet in Alaskan vein deposits, except, perhaps, for a mineral tentatively identified as pitchblende in the Hyder district of southeastern Alaska. However, certain occurrences of secondary uranium minerals, chiefly those of the uranite group, on the Seward Peninsula, in the Russian Mountains, and in the vicinity of Kodiak suggest that pitchblende-type ores may occur at depth beneath zones of alteration. Thorite-bearing veins have been discovered on Prince of Wales Island in southeastern Alaska. Although no deposits or carnotite-type minerals have been found in Alaska, several samples containing such minerals have been submitted by Alaskan prospectors. Efforts to locate the deposits from which these minerals were obtained have been unsuccessful, but review of available geologic data suggests that several Alaskan areas are potentially favorable for carnotite-type deposits. The chief of these areas is the Alaska Peninsula-Cook Inlet area which encompasses most of the reported occurrences of the prospectors' carnotite-type samples. Alaska is also potentially favorable for the occurrence of large bodies of the very low-grade uraniferous sedimentary rocks, such as phosphorites and black shales. This type of deposit, however, has not received much study because of the emphasis on the search for bonanza-type high-grade ores. Uraniferous phosphorites similar to those of Idaho, Montana, and Wyoming occur in northern Alaska on the north flank of the Brooks Range; black shales comparable to the uraniferous shales of the Chattanooga formation of southeastern United States have been noted along the Yukon River near the international boundary. Placer deposits in Alaska have some small potential for the production of the radioactive elements as byproducts of gold- and tin-placer mining. the placer area believed to have the relatively greatest potential in Alaska lies in the Kahiltna River valley where concentrates are known to contain such commercial minerals as ilmenite, cassiterite, platinum, and gold in addition to uranothorianite and monazite. The possibilities of the natural fluids--water and petroleum--have not yet been tested in Alaska to any great extent. Studies of fluids are in progress to determine whether they may be used to discover and define areas potentially favorable for the occurrence of uraniferous lodes.

Alaska↗
USGS2023

Fishes of Harney Basin revisited: An assessment of the distribution of native and nonnative fishes over a half century

The Harney Basin is Oregon's largest internally draining basin and contains a unique native fish assemblage. The first and only comprehensive study of the origin and distribution of Harney Basin fishes occurred in 1971. Here, we update this study and identify potential threats to the basin's native fishes a half century later. Our assessment documents that all species of native fishes are still present, and with some exceptions distributed as originally reported. The distinctive fish assemblages in each of the 3 major subbasins within the Harney Basin (Silvies River, Silver Creek, and Donner und Blitzen River) support the hypothesis that terminal lakes in the Harney Basin (Malheur, Mud, and Harney Lakes) act as dispersal barriers, at least for native species. More than half of the fish species in the basin at present are introduced, primarily inhabiting low-elevation sites. We suggest that native non-salmonid species cohabiting these sites face the most immediate threats from climate change, water demands, and impacts from introduced fishes. Overall, our results show that native fish are still relatively widespread across the Harney Basin, but also face increasing threats despite the basin having experienced less development than many other areas in the Pacific Northwest. Improved understanding of the unique fishes of the Harney Basin, along with more detailed assessments of likely future trajectories of environmental risks are proactive measures that could improve conservation outcomes.

Oregon↗
USGS2011

Geochemical database of feed coal and coal combustion products (CCPs) from five power plants in the United States

The principal mission of the U.S. Geological Survey (USGS) Energy Resources Program (ERP) is to (1) understand the processes critical to the formation, accumulation, occurrence, and alteration of geologically based energy resources; (2) conduct scientifically robust assessments of those resources; and (3) study the impacts of energy resource occurrence and (or) their production and use on both the environment and human health. The ERP promotes and supports research resulting in original, geology-based, non-biased energy information products for policy and decision makers, land and resource managers, other Federal and State agencies, the domestic energy industry, foreign governments, non-governmental groups, and academia. Investigations include research on the geology of oil, gas, and coal, and the impacts associated with energy resource occurrence, production, quality, and utilization. The ERP's focus on coal is to support investigations into current issues pertaining to coal production, beneficiation and (or) conversion, and the environmental impact of the coal combustion process and coal combustion products (CCPs). To accomplish these studies, the USGS combines its activities with other organizations to address domestic and international issues that relate to the development and use of energy resources.

Data Series↗
USGS1994

International phase of ocean drilling: Seismic Line 1 demultiplexed data, Cape Hatteras to Mid-Atlantic Ridge

Introduction This CD-ROM is part of a 39 disc collection containing the demultiplexed seismic data from a 3400 km-long multichannel seismic-reflection profile extending from Cape Hatteras, N.C., to the rift valley of the Mid-Atlantic Ridge. The data were collected in 1974 as part of the International Phase of Ocean Drilling (IPOD) which was jointly funded by the U.S. Geological Survey (USGS) and the National Science Foundation's Deep Sea Drilling Project (DSDP).

Data Series↗
USGS2007

USGS Reference Materials Program: Serving the Needs of the Global Analytical Community

Every year in the United States, millions of measurements are made on the chemical composition of items that affect us on a daily basis. The accuracy of these measurements is routinely determined by the analysis of appropriate reference materials. In the field of earth science, reference materials are particularly important because they help us develop a better understanding of the processes that have shaped, and continue to shape the world around us. USGS reference materials are distributed internationally to organizations involved in geochemical and environmental analysis, instrumentation and methods development, and industrial research and quality assurance. Reference materials are widely used in the development and validation of geochemical models used by the USGS.

Fact Sheet↗
USGS2011

A bibliography of literature pertaining to plague ( Yersinia pestis )

Plague is an acute and often fatal zoonotic disease caused by the bacterium Yersinia pestis . Y. pestis mainly cycles between small mammals and their fleas; however, it has the potential to infect humans and frequently causes fatalities if left untreated. It is often considered a disease of the past; however, since the late 1800s, plagueis geographic range has expanded greatly, posing new threats in previously unaffected regions of the world, including the Western United States. A literature search was conducted using Internet resources and databases. The keywords chosen for the searches included plague, Yersinia pestis , management, control, wildlife, prairie dogs, fleas, North America, and mammals. Keywords were used alone or in combination with the other terms. Although this search pertains mostly to North America, citations were included from the international research community, as well. Databases and search engines used included Google ( http://www.google.com ), Google Scholar ( http://scholar.google.com ), SciVerse Scopus ( http://www.scopus.com ), ISI Web of Knowledge ( http://apps.isiknowledge.com ), and the USGS Library's Digital Desktop ( http://library.usgs.gov ). The literature-cited sections of manuscripts obtained from keyword searches were cross-referenced to identify additional citations or gray literature that was missed by the Internet search engines. This Open-File Report, published as an Internet-accessible bibliography, is intended to be periodically updated with new citations or older references that may have been missed during this compilation. Hence, the authors would be grateful to receive notice of any new or old papers that the audience (users) think need to be included.

Open-File Report↗
USGS1982

Geotechnical properties of ash deposits near Hilo, Hawaii

Two holes were hand augered and sampled in ash deposits near Hilo, Hawaii. Color, water content and sensitivity of the ash were measured in the field. The ash alternated between reddish brown and dark reddish brown in color and had water contents as high as 392%. A downhole vane shear device measured sensitivities as high as 6.9. A series of laboratory tests including grain size distribution, Atterberg limits, X-ray diffraction analysis, total carbon determination, vane shear, direct shear and triaxial tests were performed to determine the composition and geotechnical properties of the ash. The ash is very fine grained, highly plastic and composed mostly of gibbsite and amorphous material presumably allophane. The ash has a high angle of internal friction ranging from 40-43? and is classified as medium to very sensitive. A series of different ash layers was distinguished on the basis of plasticity and other geotechnical properties. Sensitivity may be due to a metastable fabric, cementation, leaching, high organic content, and thixotropy. The sensitivity of the volcanic ash deposits near Hilo is consistent with documented slope instability during earthquakes in Hawaii. The high angles of internal friction and cementation permit very steep slopes under static conditions. However, because of high sensitivity of the ash, these slopes are particularly susceptible to seismically-induced landsliding.

Open-File Report↗
USGS1982

Documentation and user's guide for interactive spectral analysis and filter program package useful in the processing of seismic reflection data

The spectral analysis and filter program package is written in the BASIC language for the HP-9845T desktop computer. The program's main purpose is to perform spectral analyses on digitized time-domain data. In addition, band-pass filtering of the data can be performed in the time domain. Various other processes such as autocorrelation can be performed to the time domain data in order to precondition them for spectral analyses. The frequency domain data can also be transformed back into the time domain if desired. Any data can be displayed on the CRT in graphic form using a variety of plot routines. A hard copy can be obtained immediately using the internal thermal printer. Data can also be displayed in tabular form on the CRT or internal thermal printer or it can be stored permanently on a mass storage device like a tape or disk. A list of the processes performed in the order in which they occurred can be displayed at any time.

Open-File Report↗
USGS1997

Geophysical database of the east coast of the United States; southern Atlantic margin, stratigraphy and velocity in map grids

In 1990, the Naval Oceanographic Office and the U.S. Geological Survey agreed to develop a digital data base of stratigraphy and acoustic properties of sediments along the U.S. East Coast of the United States. The objective of this work was to utilize more than 25,000 km of publicly available multichannel seismic-reflection profiles (Sheridan et al., 1988) in order to assign acoustic properties to the continental margin postrift sediments in an internally consistent, geologically meaningful, regionally extensive, digital form. The acoustic properties of interest include thickness, depth, compressional- and shear-wave velocity, compressional- and shear-wave attenuation, density, and lithology. This data base subdivides the 0- to 14-km thick Jurassic and younger postrift deposits into 18 mappable horizons. The spatial scale of gridding is 5' latitude by 5 ' longitude, or about 9x8 km. This report describes the second part of developing the data base for the continental margin between Florida and Cape Hatteras: spatial gridding of the digital stratigraphic and velocity data, derivative calculations of density, shear-wave velocity, and attenuation, and construction of the final data base. The first report (Hutchinson et al., 1995) describes how the stratigraphy and velocity were digitized from the original profiles. Complementary reports that describe the data base for the area between Cape Hatteras and Georges Bank are given in Klitgord and Schneider (1994) and Klitgord et al. (1994).

Open-File Report↗
USGS2006

Synthesis of monthly and annual streamflow records (water years 1950-2003) for Big Sandy, Clear, Peoples, and Beaver Creeks in the Milk River basin, Montana

To address concerns expressed by the State of Montana about the apportionment of water in the St. Mary and Milk River basins between Canada and the United States, the International Joint Commission requested information from the United States government about water that originates in the United States but does not cross the border into Canada. In response to this request, the U.S. Geological Survey synthesized monthly and annual streamflow records for Big Sandy, Clear, Peoples, and Beaver Creeks, all of which are in the Milk River basin in Montana, for water years 1950-2003. This report presents the synthesized values of monthly and annual streamflow for Big Sandy, Clear, Peoples, and Beaver Creeks in Montana. Synthesized values were derived from recorded and estimated streamflows. Statistics, including long-term medians and averages and flows for various exceedance probabilities, were computed from the synthesized data. Beaver Creek had the largest median annual discharge (19,490 acre-feet), and Clear Creek had the smallest median annual discharge (6,680 acre-feet). Big Sandy Creek, the stream with the largest drainage area, had the second smallest median annual discharge (9,640 acre-feet), whereas Peoples Creek, the stream with the second smallest drainage area, had the second largest median annual discharge (11,700 acre-feet). The combined median annual discharge for the four streams was 45,400 acre-feet. The largest combined median monthly discharge for the four creeks was 6,930 acre-feet in March, and the smallest combined median monthly discharge was 48 acre-feet in January. The combined median monthly values were substantially smaller than the average monthly values. Overall, synthesized flow records for the four creeks are considered to be reasonable given the prevailing climatic conditions in the region during the 1950-2003 base period. Individual estimates of monthly streamflow may have large errors, however. Linear regression was used to relate logarithms of combined annual streamflow to water years 1950-2003. The results of the regression analysis indicated a significant downward trend (regression line slope was -0.00977) for combined annual streamflow. A regression analysis using data from 1956-2003 indicated a slight, but not significant, downward trend for combined annual streamflow.

Scientific Investigations Report↗
USGS2020

Soil moisture product validation good practices protocol, version 1.0

The Global Climate Observing System (GCOS) included soil moisture in the list of Essential Climate Variables (ECVs) to express its important role in Earth’s water, energy and carbon cycle. Soil moisture has a major impact on agriculture, land surface hydrology, weather, and climate forecasting. This document is a community-based effort to provide recommendations on good practices for the validation of global to regional soil moisture products. Definitions are given and metrics to adequately describe the quality of soil moisture products are presented. Spaceborne active and passive microwave sensors are listed with their characteristics, and the typical soil moisture retrieval methods are explained, including dielectric mixing models and optical methods. Spatial scaling, root zone soil moisture estimation, and operational implementations are addressed, as these issues continue to gain more and more importance. Standard and advanced in situ measurement techniques are described as well as sensor calibration, spatial representativity, sampling strategies, and the benefit of airborne campaigns.The community has agreed upon the utilization of the International Soil Moisture Network (ISMN) as the main online repository for in situ soil moisture measurements. Different validation methods such as ground-based validation, satellite product intercomparison, and time series analyses are presented. We provide strategies to evaluate the long-term quality of soil moisture products, and give advice on how to handle typical temporal and spatial-scale mismatches and how to effectively report validation results. Moreover, the benefit of blind tests is discussed to gain objective validation results. We encourage data providers, scientists and practitioners to use this Soil Moisture Product Validation Good Practices Protocol to provide, analyze, and improve high quality Earth Observation results.

Report↗
USGS2012

Reported industrial minerals occurrences and permissive areas for other occurrences in the Islamic Republic of Mauritania (phase V deliverable 88): Chapter R1 in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

In 1996, at the request of the Government of the Islamic Republic of Mauritania, a team of U.S. Geological Survey (USGS) scientists produced a strategic plan for the acquisition, improvement and modernization of multidisciplinary sets of data to support the growth of the Mauritanian minerals sector and to highlight the geological and mineral exploration potential of the country. In 1999, the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania implemented a program for the acquisition of the recommended basic geoscientific information, termed the first Projet de Renforcement Institutionnel du Secteur Minier (Project for Institutional Capacity Building in the Mining Sector, PRISM-I). As a result of the PRISM-I efforts, a great deal of new geological, geophysical, geochemical, remote sensing, and hydrological data became available for evaluation and synthesis. However, the Ministry of Petroleum, Energy, and Mines recognized that additional work was required to extract the full benefit of the data before it could be of greatest use to the international community and of benefit to the Mauritanian minerals and development sector. To achieve this benefit, the Ministry of Petroleum, Energy, and Mines implemented a second Projet de Renforcement Institutionnel du Secteur Minier (PRISM-II) in 2006 to consolidate, synthesize, and interpret all of the existing data, create a new 1:1,000,000 scale geologic map, and define the mineral resource potential of the country. A consortium in which the USGS was the lead scientific agency carried out the majority of the PRISM-II work. In 2008, the USGS Mauritania Minerals Project was interrupted due to political changes in Mauritania. PRISM-II work resumed in 2011, and was completed in 2013 with the delivery of over 40 separate written reports and plates, an access file containing the Mauritanian National Mineral Deposits Database, and an interactive GIS containing all of the multi-disciplinary data and interpretive areas of mineral resource potential in Mauritania. This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Open-File Report↗
USGS2007

Physical criteria for distinguishing sandy tsunami and storm deposits using modern examples

Modern subaerial sand beds deposited by major tsunamis and hurricanes were compared at trench, transect, and sub-regional spatial scales to evaluate which attributes are most useful for distinguishing the two types of deposits. Physical criteria that may be diagnostic include: sediment composition, textures and grading, types and organization of stratification, thickness, geometry, and landscape conformity. Published reports of Pacific Ocean tsunami impacts and our field observations suggest that sandy tsunami deposits are generally < 25 cm thick, extend hundreds of meters inland from the beach, and fill microtopography but generally conform to the antecedent landscape. They commonly are a single homogeneous bed that is normally graded overall, or that consists of only a few thin layers. Mud intraclasts and mud laminae within the deposit are strong evidence of tsunami deposition. Twig orientation or other indicators of return flow during bed aggradation are also diagnostic of tsunami deposits. Sandy storm deposits tend to be > 30 cm thick, generally extend < 300 m from the beach, and will not advance beyond the antecedent macrotopography they are able to fill. They typically are composed of numerous subhorizontal planar laminae organized into multiple laminasets that are normally or inversely graded, they do not contain internal mud laminae and rarely contain mud intraclasts. Application of these distinguishing characteristics depends on their preservation potential and any deposit modifications that accompany burial. The distinctions between tsunami and storm deposits are related to differences in the hydrodynamics and sediment-sorting processes during transport. Tsunami deposition results from a few high-velocity, long-period waves that entrain sediment from the shoreface, beach, and landward erosion zone. Tsunamis can have flow depths greater than 10 m, transport sediment primarily in suspension, and distribute the load over a broad region where sediment falls out of suspension when flow decelerates. In contrast, storm inundation generally is gradual and prolonged, consisting of many waves that erode beaches and dunes with no significant overland return flow until after the main flooding. Storm flow depths are commonly < 3 m, sediment is transported primarily as bed load by traction, and the load is deposited within a zone relatively close to the beach. Published reports of Pacific Ocean tsunami impacts and our field observations suggest that sandy tsunami deposits are generally < 25 cm thick, extend hundreds of meters inland from the beach, and fill microtopography but generally conform to the antecedent landscape. They commonly are a single homogeneous bed that is normally graded overall, or that consists of only a few thin layers. Mud intraclasts and mud laminae within the deposit are strong evidence of tsunami deposition. Twig orientation or other indicators of return flow during bed aggradation are also diagnostic of tsunami deposits. Sandy storm deposits tend to be > 30 cm thick, generally extend < 300 m from the beach, and will not advance beyond the antecedent macrotopography they are able to fill. They typically are composed of numerous subhorizontal planar laminae organized into multiple laminasets that are normally or inversely graded, they do not contain internal mud laminae and rarely contain mud intraclasts. Application of these distinguishing characteristics depends on their preservation potential and any deposit modifications that accompany burial. The distinctions between tsunami and storm deposits are related to differences in the hydrodynamics and sediment-sorting processes during transport. Tsunami deposition results from a few high-velocity, long-period waves that entrain sediment from the shoreface, beach, and landward erosion zone. Tsunamis can have flow depths greater than 10 m, transport sediment primarily in suspension, and distribute the load over a broad region where sediment falls out of suspension when flow decelerates. In contrast, storm inundation generally is gradual and prolonged, consisting of many waves that erode beaches and dunes with no significant overland return flow until after the main flooding. Storm flow depths are commonly < 3 m, sediment is transported primarily as bed load by traction, and the load is deposited within a zone relatively close to the beach.

Sedimentary Geology↗