Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Water Environment Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38Linked to original sources
USGS1978

Uranium in waters and aquifer rocks at the Nevada Test Site, Nye County, Nevada

Previous chemical, geological, and hydrological information describing the physical and chemical environment of the Nevada Test Site (a Federal reserve for the testing of nuclear explosive devices) has been combined with new radiochemical and isotope data for water and rock samples in order to explain the behavior of uranium during alteration of thick sequences of rhyolitic volcanic rocks and associated volcaniclastic sediments. A model is proposed in which uranium mobility is controlled by two competing processes. Uranium is liberated from the volcanic rocks through dissolution of the glassy constituents and is carried in solution as a uranyl carbonate complex. Uranium is subsequently removed from solution by adsorption on secondary oxides of iron, titanium, and manganese, as observed in fission-track maps of aquifer rocks. The model explains the poor correlation of dissolved uranium with depth within tuffaceous sequences in which percolation of ground water is predominantly downward. Good positive correlation of dissolved uranium with dissolved Na, total dissolved solids, and total carbonate supports the glass dissolution model, while inverse correlation of dissolved uranium with U 234 /U 238 ratios of waters implies uranium is being absorbed by a relatively insoluble, surficial phase. Alpha radioactivity of Test Site water is primarily caused by high U 234 contents, and beta activity is highly correlated with dissolved K (K 40 ). Small amounts of dissolved radium, Pb 210 , and Po 210 are present but no evidence was found for alpha activity sources related to nuclear testing (Pu, U 235 ). A filtered but unacidified carbonate solution of uranium was found to be stable (± 10 percent of original U concentration) for years when stored in acid-washed polyethylene bottles.

Nevada↗
USGS2016

Western Lake Erie Basin: Soft-data-constrained, NHDPlus resolution watershed modeling and exploration of applicable conservation scenarios

Complex watershed simulation models are powerful tools that can help scientists and policy-makers address challenging topics, such as land use management and water security. In the Western Lake Erie Basin (WLEB), complex hydrological models have been applied at various scales to help describe relationships between land use and water, nutrient, and sediment dynamics. This manuscript evaluated the capacity of the current Soil and Water Assessment Tool (SWAT2012) to predict hydrological and water quality processes within WLEB at the finest resolution watershed boundary unit (NHDPlus) along with the current conditions and conservation scenarios. The process based SWAT model was capable of the fine-scale computation and complex routing used in this project, as indicated by measured data at five gaging stations. The level of detail required for fine-scale spatial simulation made the use of both hard and soft data necessary in model calibration, alongside other model adaptations. Limitations to the model's predictive capacity were due to a paucity of data in the region at the NHDPlus scale rather than due to SWAT functionality. Results of treatment scenarios demonstrate variable effects of structural practices and nutrient management on sediment and nutrient loss dynamics. Targeting treatment to acres with critical outstanding conservation needs provides the largest return on investment in terms of nutrient loss reduction per dollar spent, relative to treating acres with lower inherent nutrient loss vulnerabilities. Importantly, this research raises considerations about use of models to guide land management decisions at very fine spatial scales. Decision makers using these results should be aware of data limitations that hinder fine-scale model interpretation.

Lake Erie Basin↗
USGS2007

Barite-forming environments along a rifted continental margin, Southern California Borderland

The Southern California Continental Borderland (SCCB) is part of the broad San Andreas transform-fault plate boundary that consists of a series of fault-bounded, petroleum-generating basins. The SCCB has high heat flow and geothermal gradients produced by thinned continental crust and Neogene volcanism. Barite deposits in the SCCB occur along faults. Barite samples from two sea-cliff sites and four offshore sites in the SCCB were analyzed for mineralogy, chemical (54 elements) and isotopic (S, Sr) compositions, and petrography. Barite from Palos Verdes (PV) Peninsula sea-cliff outcrops is hosted by the Miocene Monterey Formation and underlying basalt; carbonate rocks from those outcrops were analyzed for C, O, and Sr isotopes and the basalt for S isotopes. Cold-seep barite from Monterey Bay, California was analyzed for comparison. SCCB offshore samples occur at water depths from about 500 to 1800 m. Those barites vary significantly in texture and occurrence, from friable, highly porous actively growing seafloor mounds to dense, brecciated, vein barite. This latter type of barite contrasts with cold-seep barite in being much more coarse grained, forms thick veins in places, and completely replaced rock clasts in breccia. The barite samples range from 94 to 99 wt% BaSO4, with low trace-element contents, except for high Sr, Zr, Br, U, and Hg concentrations compared to their crustal abundances. δ34S for SCCB offshore barites range from 21.6‰ to 67.4‰, and for PV barite from 62‰ to 70‰. Pyrite from PV sea-cliff basalt and sedimentary rocks that host the barites averages 7.8‰ and 2.2‰, respectively. Two offshore barite samples have δ34S values (21.6‰, 22.1‰) close to that of modern seawater sulfate, whereas all other samples are enriched to strongly enriched in 34S. 87Sr/86Sr ratios for the barites vary over a narrow range of 0.70830–0.70856 and are much lower than that of modern seawater and also lower than the middle Miocene seawater ratio, the time of deposition of the host rocks for the PV samples. This indicates that the mineralizing fluids were not unaltered seawater. We develop a model in which the barites precipitated both below the sediment–water interface and at the seafloor from low-temperature fluids that circulated along faults. The isotopic, chemical, and textural data indicate that the barites formed by several processes. Mesozoic and Cenozoic basement rocks (crystalline and overlying sedimentary rocks), Quaternary basin fill, turbidite fans, and seawater provided various elements for the barites in different environments. The fluids had a deep-seated source and were hydrothermal in the deeper parts of the system for all the barite types, including the seafloor cold-seep deposit, based on Sr isotopes and regional geothermal gradients. These deep-seated fluids mixed with other fluids as they ascended, including seawater at and near the seafloor. The high δ34S values may have resulted from extreme Rayleigh fractionation during bacterially mediated (semi)closed-system sulfate reduction, probably driven by the flux of methane- and hydrocarbon-bearing fluids through basement rocks and basin sediments. Early diagenetic dolomite and pyrite in the host Monterey Formation in the PV Headland also formed in a zone of sulfate reduction, but within sediment buried only centimeters to a few meters and with a predominantly seawater source for the sulfur. Dolomite occurring with vein barite in the PV Headland formed at temperatures in the range of 40–90 °C. The cold-seep barites have δ34S values near that of modern seawater, although still somewhat fractionated. The barites that precipitated below the sediment–water interface have higher δ34S values, suggesting that the fluids were relatively reduced with molar dissolved barium in excess of dissolved sulfate. Those samples were exposed at the seafloor by uplift along faults and are composed predominantly of massive, brecciated, and vein barite.

California↗
USGS2005

Estimating hydrodynamic roughness in a wave-dominated environment with a high-resolution acoustic Doppler profiler

Hydrodynamic roughness is a critical parameter for characterizing bottom drag in boundary layers, and it varies both spatially and temporally due to variation in grain size, bedforms, and saltating sediment. In this paper we investigate temporal variability in hydrodynamic roughness using velocity profiles in the bottom boundary layer measured with a high-resolution acoustic Doppler profiler (PCADP). The data were collected on the ebb-tidal delta off Grays Harbor, Washington, in a mean water depth of 9 m. Significant wave height ranged from 0.5 to 3 m. Bottom roughness has rarely been determined from hydrodynamic measurements under conditions such as these, where energetic waves and medium-to-fine sand produce small bedforms. Friction velocity due to current u*c and apparent bottom roughness z0a were determined from the PCADP burst mean velocity profiles using the law of the wall. Bottom roughness kB was estimated by applying the Grant-Madsen model for wave-current interaction iteratively until the model u*c converged with values determined from the data. The resulting kB values ranged over 3 orders of magnitude (10-1 to 10-4 m) and varied inversely with wave orbital diameter. This range of kB influences predicted bottom shear stress considerably, suggesting that the use of time-varying bottom roughness could significantly improve the accuracy of sediment transport models. Bedform height was estimated from kB and is consistent with both ripple heights predicted by empirical models and bedforms in sonar images collected during the experiment. Copyright 2005 by the American Geophysical Union.

Journal of Geophysical Research C: Oceans↗
USGS2015

Characteristics and environmental aspects of slag: a review

Slag is a waste product from the pyrometallurgical processing of various ores. Based on over 150 published studies, this paper provides an overview of mineralogical and geochemical characteristics of different types of slag and their environmental consequences, particularly from the release of potentially toxic elements to water. This chapter reviews the characteristics of both ferrous (steel and blast furnace Fe) and non-ferrous (Ag, Cu, Ni, Pb, Sn, Zn) slag. Interest in slag has been increasing steadily as large volumes, on the order of hundreds of millions of tonnes, are produced annually worldwide. Research on slag generally focuses on potential environmental issues related to the weathering of slag dumps or on its utility as a construction material or reprocessing for secondary metal recovery. The chemistry and mineralogy of slag depend on the metallurgical processes that create the material and will influence its fate as waste or as a reusable product. The composition of ferrous slag is dominated by Ca and Si. Steel slag may contain significant Fe, whereas Mg and Al may be significant in Fe slag. Calcium-rich olivine-group silicates, melilite-group silicates that contain Al or Mg, Ca-rich glass, and oxides are the most commonly reported major phases in ferrous slag. Calcite and trace amounts of a variety of sulfides, intermetallic compounds, and pure metals are typically also present. The composition of non-ferrous slag, most commonly from base-metal production, is dominated by Fe and Si with significant but lesser amounts of Al and Ca. Silicates in the olivine, pyroxene, and melilite groups, as well as glass, spinels, and SiO 2 (i.e., quartz and other polymorphs) are commonly found in non-ferrous slag. Sulfides and intermetallic compounds are less abundant than the silicates and oxides. The concentrations of some elements exceed generic USEPA soil screening levels for human contact based on multiple exposure pathways; these elements include Al, Cr, Cu, Fe, Mn, Pb, and Zn based on bulk chemical composition. Each slag type usually contains a specific suite of elements that may be of environmental concern. In general, non-ferrous slag may have a higher potential to negatively impact the environment compared to ferrous slag, and is thus a less attractive material for reuse, based on trace element chemistry, principally for base metals. However, the amount of elements released into the environment is not always consistent with bulk chemical composition. Many types of leaching tests have been used to help predict slag’s long-term environmental behavior. Overall, ferrous slags produce an alkaline leachate due to the dissolution of Ca oxides and silicates derived from compounds originally added as fluxing agents, such as lime. Ferrous slag leachate is commonly less metal-rich than leachate from non-ferrous slag generated during base metal extraction; the latter leachate may even be acidic due to the oxidation of sulfides. Because of its characteristics, ferrous slag is commonly used for construction and environmental applications, whereas both non-ferrous and ferrous slag may be reprocessed for secondary metal recovery. Both types of slag have been a source of some environmental contamination. Research into the environmental aspects of slag will continue to be an important topic whether the goal is its reuse, recycling, or remediation.

Applied Geochemistry↗
USGS2012

Ecosystem services valuation to support decisionmaking on public lands—A case study of the San Pedro River watershed, Arizona

This report details the findings of the Bureau of Land Management–U.S. Geological Survey Ecosystem Services Valuation Pilot Study. This project evaluated alternative methods and tools that quantify and value ecosystem services, and it assessed the tools’ readiness for use in the Bureau of Land Management decisionmaking process. We tested these tools on the San Pedro River watershed in northern Sonora, Mexico, and southeast Arizona. The study area includes the San Pedro Riparian National Conservation Area (managed by the Bureau of Land Management), which has been a focal point for conservation activities and scientific research in recent decades. We applied past site-specific primary valuation studies, value transfer, the Wildlife Habitat Benefits Estimation Toolkit, and the Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST) and Artificial Intelligence for Ecosystem Services (ARIES) models to value locally important ecosystem services for the San Pedro River watershed—water, carbon, biodiversity, and cultural values. We tested these approaches on a series of scenarios to evaluate ecosystem service changes and the ability of the tools to accommodate scenarios. A suite of additional tools were either at too early a stage of development to run, were proprietary, or were place-specific tools inappropriate for application to the San Pedro River watershed. We described the strengths and weaknesses of these additional ecosystem service tools against a series of evaluative criteria related to their usefulness for Bureau of Land Management decisionmaking. Using these tools, we quantified gains or losses of ecosystem services under three categories of scenarios: urban growth, mesquite management, and water augmentation. These results quantify tradeoffs and could be useful for decisionmaking within Bureau of Land Management district or field offices. Results are accompanied by a relatively high level of uncertainty associated with model outputs, valuation methods, and discount rates applied. Further guidance on representing uncertainty and applying uncertain results in decisionmaking would benefit both tool developers and those offices in using ecosystem services to compare management tradeoffs. Decisionmakers and Bureau of Land Management managers at the State-, district-, and field-office level would also benefit from continuing model improvements, training, and guidance on tool use that can be provided by the U.S. Geological Survey, the Bureau of Land Management, and the Department of the Interior. Tradeoffs were identified in the level of effort needed to parameterize and run tools and the amount and quality of information they provide to the decision process. We found the Wildlife Habitat Benefits Estimation Toolkit, Ecosystem Services Review, and United Nations Environment Programme–World Conservation Monitoring Centre Ecosystem Services Toolkit to be immediately feasible for application by the Bureau of Land Management, given proper guidance on their use. It is also feasible for the Bureau of Land Management to use the InVEST model, but in early 2012 the process of parameterizing the model required resources and expertise that are unlikely to be available in most Bureau of Land Management district or field offices. Application of past primary valuation is feasible, but developing new primary-valuation studies is too time consuming for regular application. Value transfer approaches (aside from the Wildlife Habitat Benefits Estimation Toolkit) are best applied carefully on the basis of guidelines described in this report, to reduce transfer error. The ARIES model can provide useful information in regions modeled in the past (Arizona, California, Colorado, and Washington), but it lacks some features that will improve its usability, such as a generalized model that could be applied anywhere in the United States. Eleven other tools described in this report could become useful as the tools more fully develop, in high-profile cases for which additional resources are available for tool application or in case-study regions where place-specific models have already been developed. To improve the value of these tools in decisionmaking, we suggest scientific needs that agencies such as U.S. Geological Survey can help meet—for instance, development and support of data archives. Such archives could greatly reduce resource needs and improve the reliability and consistency of results. Given the rapid state of evolution in the field, periodic follow-up studies on ecosystem services tools would help to ensure that the Bureau of Land Management and other public land management agencies are kept up to date on new tools and features that bring ecosystem services closer to readiness for use in regular decisionmaking.

Arizona;Sonora↗
USGS2017

Sediment transport in the presence of large reef bottom roughness

The presence of large bottom roughness, such as that formed by benthic organisms on coral reef flats, has important implications for the size, concentration, and transport of suspended sediment in coastal environments. A 3 week field study was conducted in approximately 1.5 m water depth on the reef flat at Ningaloo Reef, Western Australia, to quantify the cross-reef hydrodynamics and suspended sediment dynamics over the large bottom roughness (∼20–40 cm) at the site. A logarithmic mean current profile consistently developed above the height of the roughness; however, the flow was substantially reduced below the height of the roughness (canopy region). Shear velocities inferred from the logarithmic profile and Reynolds stresses measured at the top of the roughness, which are traditionally used in predictive sediment transport formulations, were similar but much larger than that required to suspend the relatively coarse sediment present at the bed. Importantly, these stresses did not represent the stresses imparted on the sediment measured in suspension and are therefore not relevant to the description of suspended sediment transport in systems with large bottom roughness. Estimates of the bed shear stresses that accounted for the reduced near-bed flow in the presence of large roughness vastly improved the relationship between the predicted and observed grain sizes that were in suspension. Thus, the impact of roughness, not only on the overlying flow but also on bed stresses, must be accounted for to accurately estimate suspended sediment transport in regions with large bottom roughness, a common feature of many shallow coastal ecosystems.

Journal of Geophysical Research C: Oceans↗
USGS2019

The effect of brine on the electrical properties of methane hydrate

Gas hydrates possess lower electrical conductivity (inverse of resistivity) than either seawater or ice, but higher than clastic silts and sands, such that electromagnetic methods can be employed to help identify their natural formation in marine and permafrost environments. Controlled laboratory studies offer a means to isolate and quantify the effects of changing individual components within gas‐hydrate‐bearing systems, in turn yielding insight into the behavior of natural systems. Here we investigate the electrical properties of polycrystalline methane hydrate with ≥25% gas‐filled porosity and in mixture with brine. Initially, pure methane hydrate was synthesized from H 2 O ice and CH 4 gas while undergoing electrical impedance measurement, then partially dissociated to assess the effects of pure pore water accumulation on electrical conductivity. Methane hydrate + brine mixtures were then formed by either adding NaCl (0.25–2.5 wt %) to high‐purity ice or by using frozen seawater as a reactant. Conductivity was obtained from impedance measurements made in situ throughout synthesis while temperature cycled between +15 °C and −25 °C. Several possible conduction mechanisms were subsequently determined using equivalent circuit modeling. Samples with low NaCl concentration show a doping/impurity effect and a log linear conductivity response as a function of temperature. For higher salt content samples, conductivity increases exponentially with temperature and the log linear relationship no longer holds; instead, we observe phase changes within the samples that follow NaCl–H 2 O–CH 4 phase equilibrium predictions. Final samples were quenched in liquid nitrogen and imaged by cryogenic scanning electron microscopy (cryo‐SEM) to assess grain‐scale characteristics.

Journal of Geophysical Research↗
USGS2019

An integrated statistical and deterministic hydrologic model for analyzing trace organic contaminants in commercial and high-density residential stormwater runoff

Urbanization can dramatically alter stormwater, both the quantity and quality, by engendering larger peak flows and through the introduction of contaminants into runoff. The current study builds on previous research that developed relationships between a suite of nonpoint source contaminants, known as trace organic contaminants (TOrCs), and hydrologic measurements for a series of storms (one site had 15 storms and the other had 19 storms) in Madison, WI, by creating statistical and deterministic models. Correlations and regressions were calculated between TOrC loads and hydrologic measurements for a series of storms for both a commercial site and a high-density residential site. From the regressions, it became evident that loading responses to precipitation were not the same between the two land covers for some TOrCs, indicating varying load responses for TOrCs depending on land cover. The regressions were utilized in the Source Loading and Management Model for Windows (WinSLAMM), an event-based hydrologic and water-quality model, to demonstrate that it can be used to model novel contaminants. The regressions were also used to estimate mean annual loads of TOrCs from all commercial and high-density residential areas in Madison, WI, for the watersheds to which Madison discharges its stormwater. The mean annual loads varied between grams per year to tens of thousands of grams per year depending on the TOrC and watershed. This work will ultimately allow managers to simulate the presence of, establish total maximum daily loads for, and mitigate the loads of TOrCs through stormwater best management practices.

Wisconsin↗
USGS2000

Geochemical investigations by the U.S. Geological Survey on uranium mining, milling, and environmental restoration

Recent research by the U.S. Geological Survey has characterized contaminant sources and identified important geochemical processes that influence transport of radionuclides from uranium mining and milling wastes. 1) Selective extraction studies indicated that alkaline earth sulfates and hydrous ferric oxides are important hosts of 226 Ra in uranium mill tailings. The action of sulfate-reducing and ironreducing bacteria on these phases was shown to enhance release of radium, and this adverse result may temper decisions to dispose of uranium mill tailings in anaerobic environments. 2) Field studies have shown that although surface-applied sewage sludge/wood chip amendments aid in revegetating pyritic spoil, the nitrogen in sludge leachate can enhance pyrite oxidation, acidification of groundwater, and the consequent mobilization of metals and radionuclides. 3) In a U.S. Environmental Protection Agencyfunded study, three permeable reactive barriers consisting of phosphate-rich material, zero-valent iron, or amorphous ferric oxyhydroxide have been installed at an abandoned uranium upgrader facility near Fry Canyon, UT. Preliminary results indicate that each of the permeable reactive barriers is removing the majority of the uranium from the groundwater. 4) Studies on the geochemistry of rare earth elements as analogues for actinides such as uranium and thorium in acid mine drainage environments indicate high mobility under acid-weathering conditions but measurable attenuation associated with iron and aluminum colloid formation. Mass balances from field and laboratory studies are being used to quantify the amount of attenuation. 5) A field study in Colorado demonstrated the use of 234 U/ 238 U isotopic ratio measurements to evaluate contamination of shallow groundwater with uranium mill effluent.

Utah↗
USGS2014

Runoff sources and flowpaths in a partially burned, upland boreal catchment underlain by permafrost

Boreal soils in permafrost regions contain vast quantities of frozen organic material that is released to terrestrial and aquatic environments via subsurface flowpaths as permafrost thaws. Longer flowpaths may allow chemical reduction of solutes, nutrients, and contaminants, with implications for greenhouse gas emissions and aqueous export. Predicting boreal catchment runoff is complicated by soil heterogeneities related to variability in active layer thickness, soil type, fire history, and preferential flow potential. By coupling measurements of permeability, infiltration potential, and water chemistry with a stream chemistry end member mixing model, we tested the hypothesis that organic soils and burned slopes are the primary sources of runoff, and that runoff from burned soils is greater due to increased hydraulic connectivity. Organic soils were more permeable than mineral soils, and 25% of infiltration moved laterally upon reaching the organic-mineral soil boundary on unburned hillslopes. A large portion of the remaining water infiltrated into deeper, less permeable soils. In contrast, burned hillslopes displayed poorly defined soil horizons, allowing rapid, mineral-rich runoff through preferential pathways at various depths. On the catchment scale, mineral/organic runoff ratios averaged 1.6 and were as high as 5.2 for an individual storm. Our results suggest that burned soils are the dominant source of water and solutes reaching the stream in summer, whereas unburned soils may provide longer term storage and residence times necessary for production of anaerobic compounds. These results are relevant to predicting how boreal catchment drainage networks and stream export will evolve given continued warming and altered fire regimes.

Alaska↗
USGS2013

A comprehensive evaluation of two MODIS evapotranspiration products over the conterminous United States: using point and gridded FLUXNET and water balance ET

Remote sensing datasets are increasingly being used to provide spatially explicit large scale evapotranspiration (ET) estimates. Extensive evaluation of such large scale estimates is necessary before they can be used in various applications. In this study, two monthly MODIS 1 km ET products, MODIS global ET (MOD16) and Operational Simplified Surface Energy Balance (SSEBop) ET, are validated over the conterminous United States at both point and basin scales. Point scale validation was performed using eddy covariance FLUXNET ET (FLET) data (2001–2007) aggregated by year, land cover, elevation and climate zone. Basin scale validation was performed using annual gridded FLUXNET ET (GFET) and annual basin water balance ET (WBET) data aggregated by various hydrologic unit code (HUC) levels. Point scale validation using monthly data aggregated by years revealed that the MOD16 ET and SSEBop ET products showed overall comparable annual accuracies. For most land cover types, both ET products showed comparable results. However, SSEBop showed higher performance for Grassland and Forest classes; MOD16 showed improved performance in the Woody Savanna class. Accuracy of both the ET products was also found to be comparable over different climate zones. However, SSEBop data showed higher skill score across the climate zones covering the western United States. Validation results at different HUC levels over 2000–2011 using GFET as a reference indicate higher accuracies for MOD16 ET data. MOD16, SSEBop and GFET data were validated against WBET (2000–2009), and results indicate that both MOD16 and SSEBop ET matched the accuracies of the global GFET dataset at different HUC levels. Our results indicate that both MODIS ET products effectively reproduced basin scale ET response (up to 25% uncertainty) compared to CONUS-wide point-based ET response (up to 50–60% uncertainty) illustrating the reliability of MODIS ET products for basin-scale ET estimation. Results from this research would guide the additional parameter refinement required for the MOD16 and SSEBop algorithms in order to further improve their accuracy and performance for agro-hydrologic applications.

Remote Sensing of Environment↗
USGS2003

Predicting coastal retreat in the Florida Big Bend region of the Gulf Coast under climate change induced sea-level rise

Many wildlife preserves and refuges in coastal areas of our nation are slowly being inundated by rising sea-level. Land elevation and tidal flooding are key factors controlling the extent and zonation of coastal habitats. Warming of our global environment threatens to speed the rate of sea-level rise and perhaps further amplify the detrimental effects of tropical storms, droughts, and lightning fires. A field and modeling study was conducted to determine the current status of emergent vegetation and surficial hydrology and to predict marsh transgression under rising sea-level. Field surveys were conducted to relate vegetation cover and ecotones to surface elevation and tidal inundation. A regional site application of a GIS-based simulation model, WETLANDS, was developed to predict ecosystem response to changing sea-level conditions on a coastal reach of the Big Bend region in northwest Florida. The WETLANDS model contains functional probabilities of community tolerance to flooding conditions that dictate the rate and process of ecological succession and coastal retreat. Map information of hypsography and bathymetry of the study area were digitized and interpolated to construct a digital elevation model. Classified thematic mapper imagery of aquatic and terrestrial habitat at a community level was used to initialize model simulation by vegetative type. Model simulations were generated to predict a likelihood index of habitat change and conversion under different scenarios of sea-level rise. The WETLANDS model was applied to track the process and pattern of coastal inundation over space and time for low, mid, and high sea-level rise projections of 15, 50, and 95 cm over the next century. Model results indicated that major portions of this coastal zone will be permanently inundated by 2100, bringing about a combined migration of marsh habitat and displacement of forest habitat. Results show that lowland pine forests will undergo retreat on the order of thousands of hectares over the 21st century. Coastal marsh extent may actually increase slightly as a function of the low lying topography. Socioeconomic implications may be nominal for this area given its remote and fairly undeveloped and protected coast-202 line. The model offers a technological tool for research and policy purposes that allows for effective land and water management, risk assessment, and cumulative impact analysis of wetland systems and landscapes.

Florida↗
USGS2024

Pockmarks offshore Big Sur, California provide evidence for recurrent, regional, and unconfined sediment gravity flows

Recent surface ship multibeam surveys of the Sur Pockmark Field, offshore Central California, reveal >5,000 pockmarks in an area that is slated to host a wind farm, between 500- and 1,500-m water depth. Extensive fieldwork was conducted to characterize the seafloor environment and its recent geologic history, including visual observations with remotely operated vehicles, sediment core sampling, and high-resolution, near-bottom Chirp and multibeam surveys collected with autonomous underwater vehicles to capture the morphology and stratigraphy of the pockmarks. No evidence of high methane concentrations in sediments, chemosynthetic biological communities, or methane-derived diagenetic byproducts was found. Chirp data and sediment cores showed alternating layers of slowly accumulating hemipelagic drapes interrupted by more reflective turbidite horizons that extend throughout the pockmark field and beyond. Chirp data showed multiple episodes of lateral migration over time in some of the pockmarks in association with erosion and infilling events. Laterally continuous turbidite horizons that overlay erosional surfaces indicated that pockmark migration occurred synchronously in multiple pockmarks separated by tens of kilometers. These shifts are presumed to be the result of asymmetrical erosion of the pockmark flanks caused by passing sediment gravity flows. While some pockmarks occur in chains, most are not clustered or randomly spaced but are regularly dispersed within the pockmark field. We hypothesize that intermittent, unconfined sediment gravity flows occurring over at least the last 280,000 years are the source of the regionally continuous turbidite deposits and the mechanism that maintained the regularly dispersed pockmarks.

California↗
USGS2018

Surveys of environmental DNA (eDNA): a new approach to estimate occurrence in Vulnerable manatee populations

Environmental DNA (eDNA) detection is a technique used to non-invasively detect cryptic, low density, or logistically difficult-to-study species, such as imperiled manatees. For eDNA measurement, genetic material shed into the environment is concentrated from water samples and analyzed for the presence of target species. Cytochrome b quantitative PCR and droplet digital PCR eDNA assays were developed for the 3 Vulnerable manatee species: African, Amazonian, and both subspecies of the West Indian (Florida and Antillean) manatee. Environmental DNA assays can help to delineate manatee habitat ranges, high use areas, and seasonal population changes. To validate the assay, water was analyzed from Florida’s east coast containing a high-density manatee population and produced 31564 DNA molecules l -1 on average and high occurrence (ψ) and detection (p) estimates (ψ = 0.84 [0.40-0.99]; p = 0.99 [0.95-1.00]; limit of detection 3 copies µl -1 ). Similar occupancy estimates were produced in the Florida Panhandle (ψ = 0.79 [0.54-0.97]) and Cuba (ψ = 0.89 [0.54-1.00]), while occupancy estimates in Cameroon were lower (ψ = 0.49 [0.09-0.95]). The eDNA-derived detection estimates were higher than those generated using aerial survey data on the west coast of Florida and may be effective for population monitoring. Subsequent eDNA studies could be particularly useful in locations where manatees are (1) difficult to identify visually (e.g. the Amazon River and Africa), (2) are present in patchy distributions or are on the verge of extinction (e.g. Jamaica, Haiti), and (3) where repatriation efforts are proposed (e.g. Brazil, Guadeloupe). Extension of these eDNA techniques could be applied to other imperiled marine mammal populations such as African and Asian dugongs.

Endangered Species Research↗
USGS2018

Bioactive contaminants of emerging concern in National Park waters of the northern Colorado Plateau, USA

Pharmaceuticals and personal care products (PPCPs), wastewater indicators (WWIs), and pesticides (herein, Contaminants of Emerging Concern [CECs]) have been documented in surface waters throughout the world and have associated risks to aquatic life. While much research has focused on temperate and urbanized watersheds, less is known about CEC presence in semi-arid landscapes, where water availability is limited and populations are low. CEC presence in water and sediment is reported for 21 sites in eight U.S. national parks in the northern Colorado Plateau region. From 2012 to 2016, at least one PPCP and/or WWI was detected at most sites on over half of sampling visits, indicating that CECs are not uncommon even in isolated areas. CEC detections were generally fewer and at lower concentrations than in urbanized or agricultural watersheds. Consistent with studies from other U.S. regions, the most frequently detected CECs in this study include DEET, caffeine, organophosphorus flame retardants, and bisphenol A in water and fecal indicators and polycyclic aromatic hydrocarbons in sediment. Maximum concentrations in this study were generally below available water quality benchmarks, sediment quality guidelines, and risk assessment thresholds associated with vertebrates. Additional work is needed to assess the potential activity of hormones, which had high reporting limits in our study, and potential bioactivity of environmental concentrations for invertebrates, microbial communities, and algae. Potential sources of CEC contamination include upstream wastewater effluent discharges and National Park Service invasive-plant-control herbicide applications. CEC occurrence patterns and similarities between continuous and isolated flow locations suggest that direct contamination from individual visitors may also occur. While our data indicate there is little aquatic health risk associated with CECs at our sites, our results demonstrate the ubiquity of CECs on the landscape and a continued need for public outreach concerning resource-use ethics and the potential effects of upstream development.

Colorado Plateau↗
USGS2009

Obtaining parsimonious hydraulic conductivity fields using head and transport observations: A Bayesian geostatistical parameter estimation approach

Flow path delineation is a valuable tool for interpreting the subsurface hydrogeochemical environment. Different types of data, such as groundwater flow and transport, inform different aspects of hydrogeologic parameter values (hydraulic conductivity in this case) which, in turn, determine flow paths. This work combines flow and transport information to estimate a unified set of hydrogeologic parameters using the Bayesian geostatistical inverse approach. Parameter flexibility is allowed by using a highly parameterized approach with the level of complexity informed by the data. Despite the effort to adhere to the ideal of minimal a priori structure imposed on the problem, extreme contrasts in parameters can result in the need to censor correlation across hydrostratigraphic bounding surfaces. These partitions segregate parameters into facies associations. With an iterative approach in which partitions are based on inspection of initial estimates, flow path interpretation is progressively refined through the inclusion of more types of data. Head observations, stable oxygen isotopes ( 18 O/ 16 O ratios), and tritium are all used to progressively refine flow path delineation on an isthmus between two lakes in the Trout Lake watershed, northern Wisconsin, United States. Despite allowing significant parameter freedom by estimating many distributed parameter values, a smooth field is obtained.

Water Resources Research↗
USGS2009

Predicting organic floc transport dynamics in shallow aquatic ecosystems: Insights from the field, the laboratory, and numerical modeling

Transport of particulate organic material can impact watershed sediment and nutrient budgets and can alter the geomorphologic evolution of shallow aquatic environments. Prediction of organic aggregate (“floc”) transport in these environments requires knowledge of how hydraulics and biota affect the entrainment, settling, and aggregation of particles. This study evaluated the aggregation and field transport dynamics of organic floc from a low‐gradient floodplain wetland with flow‐parallel ridges and sloughs in the Florida Everglades. Floc dynamics were evaluated in a rotating annular flume and in situ in the field. Under present managed conditions in the Everglades, floc is not entrained by mean flows but is suspended via biological production in the water column and bioturbation. Aggregation was a significant process affecting Everglades floc at high flume flow velocities (7.0 cm s −1 ) and during recovery from high flow; disaggregation was not significant for the tested flows. During moderate flows when floc dynamics are hydrodynamically controlled, it is possible to model floc transport using a single “operative floc diameter” that accurately predicts fluxes downstream and to the bed. In contrast, during high flows and recovery from high flows, aggregation dynamics should be simulated. When entrained by flow in open‐water sloughs, Everglades floc will be transported downstream in multiple deposition and reentrainment events but will undergo net settling when transported onto ridges of emergent vegetation. We hypothesize that net transport of material from open to vegetated areas during high flows is critical for forming and maintaining distinctive topographic patterning in the Everglades and other low‐gradient floodplains.

Water Resources Research↗