Geology ReportsSearch

USGS · 70029763

Barite-forming environments along a rifted continental margin, Southern California Borderland

Abstract

The Southern California Continental Borderland (SCCB) is part of the broad San Andreas transform-fault plate boundary that consists of a series of fault-bounded, petroleum-generating basins. The SCCB has high heat flow and geothermal gradients produced by thinned continental crust and Neogene volcanism. Barite deposits in the SCCB occur along faults. Barite samples from two sea-cliff sites and four offshore sites in the SCCB were analyzed for mineralogy, chemical (54 elements) and isotopic (S, Sr) compositions, and petrography. Barite from Palos Verdes (PV) Peninsula sea-cliff outcrops is hosted by the Miocene Monterey Formation and underlying basalt; carbonate rocks from those outcrops were analyzed for C, O, and Sr isotopes and the basalt for S isotopes. Cold-seep barite from Monterey Bay, California was analyzed for comparison. SCCB offshore samples occur at water depths from about 500 to 1800 m. Those barites vary significantly in texture and occurrence, from friable, highly porous actively growing seafloor mounds to dense, brecciated, vein barite. This latter type of barite contrasts with cold-seep barite in being much more coarse grained, forms thick veins in places, and completely replaced rock clasts in breccia. The barite samples range from 94 to 99 wt% BaSO4, with low trace-element contents, except for high Sr, Zr, Br, U, and Hg concentrations compared to their crustal abundances. δ34S for SCCB offshore barites range from 21.6‰ to 67.4‰, and for PV barite from 62‰ to 70‰. Pyrite from PV sea-cliff basalt and sedimentary rocks that host the barites averages 7.8‰ and 2.2‰, respectively. Two offshore barite samples have δ34S values (21.6‰, 22.1‰) close to that of modern seawater sulfate, whereas all other samples are enriched to strongly enriched in 34S. 87Sr/86Sr ratios for the barites vary over a narrow range of 0.70830–0.70856 and are much lower than that of modern seawater and also lower than the middle Miocene seawater ratio, the time of deposition of the host rocks for the PV samples. This indicates that the mineralizing fluids were not unaltered seawater. We develop a model in which the barites precipitated both below the sediment–water interface and at the seafloor from low-temperature fluids that circulated along faults. The isotopic, chemical, and textural data indicate that the barites formed by several processes. Mesozoic and Cenozoic basement rocks (crystalline and overlying sedimentary rocks), Quaternary basin fill, turbidite fans, and seawater provided various elements for the barites in different environments. The fluids had a deep-seated source and were hydrothermal in the deeper parts of the system for all the barite types, including the seafloor cold-seep deposit, based on Sr isotopes and regional geothermal gradients. These deep-seated fluids mixed with other fluids as they ascended, including seawater at and near the seafloor. The high δ34S values may have resulted from extreme Rayleigh fractionation during bacterially mediated (semi)closed-system sulfate reduction, probably driven by the flux of methane- and hydrocarbon-bearing fluids through basement rocks and basin sediments. Early diagenetic dolomite and pyrite in the host Monterey Formation in the PV Headland also formed in a zone of sulfate reduction, but within sediment buried only centimeters to a few meters and with a predominantly seawater source for the sulfur. Dolomite occurring with vein barite in the PV Headland formed at temperatures in the range of 40–90 °C. The cold-seep barites have δ34S values near that of modern seawater, although still somewhat fractionated. The barites that precipitated below the sediment–water interface have higher δ34S values, suggesting that the fluids were relatively reduced with molar dissolved barium in excess of dissolved sulfate. Those samples were exposed at the seafloor by uplift along faults and are composed predominantly of massive, brecciated, and vein barite.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 31° to 34° latitude; -120° to -117° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

James R. Hein, Robert A. Zierenberg, J. Barry Maynard, Mark D. Hannington. 2007. Barite-forming environments along a rifted continental margin, Southern California Borderland. https://doi.org/10.1016/j.dsr2.2007.04.011

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Habitat utilization, demography, and behavioral observations of the squat lobster, Eumunida picta (Crustacea: Anomura: Eumunididae), on western North Atlantic deep-water coral habitats

Deep-sea coral habitats, comprising mostly Lophelia pertusa (Linnaeus 1758), are well developed on the upper and middle continental slope off the southeastern United States (SEUS). These habitats support a diverse and abundant invertebrate fauna, yet ecology and biology of most of these species are poorly known. Ten cruises conducted off the SEUS (Summer–Fall; Cape Lookout, NC–Cape Canaveral, FL) from 2000 to 2005, and in 2009 provided an opportunity to investigate abundance and distribution of Eumunida picta Smith1883, a large-sized species of squat lobster commonly associated with these deep-water coral habitats. Video analysis from 70 manned-submersible dives documented occurrence, density, location on the coral colony, and behavioral observations for 5774 individuals of E . picta . Individuals collected (n = 178) from coral and adjacent habitats (e.g., rubble, soft sediments) were measured and their sex determined. Males and females were comparable in size (to 53.5 mm carapace length) and exhibited a sex ratio of approximately 1:1. Eumunida picta were most frequently observed as solitary individuals on high-profile coral matrix and were noted only infrequently on coral rubble, or rarely on soft substratum. Presence of coral habitat (i.e., live/dead L. pertusa ), geographic region within the sampling area, and depth significantly influenced abundances of E. picta . Additionally, coral habitat (dead versus live coral), vertical position on the coral (upper, middle, or lower zone), as well as horizontal position in relation to the coral matrix (outer surface versus embedded in coral matrix) were significant factors influencing E. picta distributions within the coral habitat. More individuals were found on dead versus live coral, and most frequently occurred on the outer surfaces of coral branches located on the upper portion or near the tops of coral colonies. Eumunida picta were most often observed with claws extended into the water column. This unique hunting stance provides this squat lobster the opportunity to capture prey from the water column. An active predator, this species utilizes both pelagic (i.e., fishes, pyrosomes) and benthic (e.g., scavenging and grazing) food resources, and may function as an important trophic link between the water column and the benthos. Although considered a facultative reef associate in the strictest sense of the term, E. picta has a complex and intimate relationship with L. pertusa . Based on observations from dive videos, E. picta is a dominant and ecologically important member of the invertebrate assemblage associated with deep-sea coral habitats off the SEUS. As such, this species figures prominently in the structure and function of this ecosystem.

western North Atlantic

Seafloor fluid seeps on Kimki Ridge, offshore southern California: Links to active strike-slip faulting

The Kimki Ridge fluid seeps are located in western Catalina Basin about 60 km southwest of the southern California mainland and at a water depth of approximately 1100 m. Multichannel seismic reflection profiles collected by the U.S. Geological Survey (USGS) in 2014 show acoustic transparency within the Kimki Ridge, suggesting the possibility of fluid seeps and possible sub-seafloor fluid pathways. Subsequent multibeam bathymetric and backscatter intensity data collected during a cooperative University of Washington/USGS cruise in early 2016 show subtle seafloor buildups with high acoustic backscatter (reflectivity) in three places along Kimki Ridge, supporting the existence of fluid seepage. A Remotely Operated Vehicle (ROV) dive, conducted as part of the Nautilus Exploration Program, took place in August 2016 to confirm the presence of these previously unknown seeps and document their characteristics as well as those of any associated biological communities. Two of the three seeps were explored by ROV, and showed abundant evidence of fluid seepage, including characteristic algal mats, chemosynthetic clams, and authigenic carbonate formation. The seeps are comprised of carbonate buildups 1–3 m thick and 300–500 m across. Within these areas, we interpret broad crater-like depressions 30–50 m across and 1–2 m deep to be individual seep vents. The seep areas appear to be broad zones of diffuse seepage that support chemosynthetic biologic communities; however, active venting was not observed. Geochemical analyses of rock samples collected from the seeps indicate microbially driven anaerobic oxidation of methane at or near the sediment water interface. Seismic-reflection profiles show chimney-like fluid pathways along the limbs and in the axis of the fold forming Kimki Ridge, and evidence of methane in shallow sediments can be traced into the adjacent Catalina Basin. A system of closely spaced faults located at the axis of the Kimki Ridge anticline may serve as pathways to allow fluid flow to the seafloor. Our data are consistent with other studies that suggest that transpression is an important component in the formation and localization of fluid seeps in a strike-slip setting, implying that seep formation may be a common occurrence at fault stepovers or transpressional bends in strike-slip systems.

California

Low incidence of clonality in cold water corals revealed through the novel use of standardized protocol adapted to deep sea sampling

Sampling in the deep sea is a technical challenge, which has hindered the acquisition of robust datasets that are necessary to determine the fine-grained biological patterns and processes that may shape genetic diversity. Estimates of the extent of clonality in deep-sea species, despite the importance of clonality in shaping the local dynamics and evolutionary trajectories, have been largely obscured by such limitations. Cold-water coral reefs along European margins are formed mainly by two reef-building species, Lophelia pertusa and Madrepora oculata . Here we present a fine-grained analysis of the genotypic and genetic composition of reefs occurring in the Bay of Biscay, based on an innovative deep-sea sampling protocol. This strategy was designed to be standardized, random, and allowed the georeferencing of all sampled colonies. Clonal lineages discriminated through their Multi-Locus Genotypes (MLG) at 6–7 microsatellite markers could thus be mapped to assess the level of clonality and the spatial spread of clonal lineages. High values of clonal richness were observed for both species across all sites suggesting a limited occurrence of clonality, which likely originated through fragmentation. Additionally, spatial autocorrelation analysis underlined the possible occurrence of fine-grained genetic structure in several populations of both L. pertusa and M. oculata . The two cold-water coral species examined had contrasting patterns of connectivity among canyons, with among-canyon genetic structuring detected in M. oculata , whereas L. pertusa was panmictic at the canyon scale. This study exemplifies that a standardized, random and georeferenced sampling strategy, while challenging, can be applied in the deep sea, and associated benefits outlined here include improved estimates of fine grained patterns of clonality and dispersal that are comparable across sites and among species.

Deep-Sea Research Part II: Topical Studies in Ocea