Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Minerals and the Environment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38Linked to original sources
USGS2001

Potential contribution of microbial degradation to natural attenuation of MTBE in surface water systems

To evaluate the potential contribution of in situ biodegradation as a mechanism for natural attenuation of MTBE in surface water, surface water sediments were collected from streams and lakes at 11 sites throughout the US and the ability of the indigenous microorganisms to mineralize [U-14C] MTBE to 14CO2 under aerobic conditions was examined. Mineralization of [U-14C] MTBE to 14CO2 ranged from 15 to 66% over 50 days and did not differ significantly between sediments collected from MTBE contaminated sites and from sites with no history of MTBE exposure. The microorganisms, which inhabit the bed sediments of streams and lakes could degrade MTBE efficiently and this capability is widespread in the environment. Microbial degradation of [U-14C] MTBE was observed in surface-water-sediment microcosms under anaerobic conditions, but the efficiency and products of anaerobic MTBE biodegradation were strongly dependent on the predominant terminal electron accepting conditions. Microorganisms inhabiting the bed sediments of streams and lakes could degrade MTBE effectively under a range of anaerobic terminal electron accepting conditions. Thus, anaerobic bed sediment microbial processes also might contribute to natural attenuation of MTBE in surface water systems throughout the US.

Conference Paper↗
USGS2003

Geochemical processes controlling transport of arsenic in groundwater: A review of adsorption

Adsorption is the predominate mechanism controlling transport of arsenic in many ground water systems. Hydrous oxides of iron, aluminum, and manganese, and clay minerals are commonly associated with aquifer solids and have been shown to be significant adsorbents of arsenic. The extent of arsenic adsorption is influenced by the chemistry of the aqueous phase including pH, arsenic speciation, and the presence and concentration of competing ions. Under moderately reducing conditions, trivalent arsenite is stable and adsorption increases with increasing pH. In an oxidizing environment, arsenate is stable and adsorption decreases with increasing pH. The presence of phosphate, sulfate, carbonate, silica, and other anions have been shown to decrease adsorption of arsenic to varying degrees. The effects of complex aqueous and solid phase chemistry on arsenic adsorption are best simulated using surface complexation models. Coupling of such models with hydrologic solute transport codes provide a powerful method for predicting the spatial and temporal distribution of arsenic in ground water.

Book chapter↗
USGS2013

Characterizing regional soil mineral composition using spectroscopyand geostatistics

This work aims at improving the mapping of major mineral variability at regional scale using scale-dependent spatial variability observed in remote sensing data. Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data and statistical methods were combined with laboratory-based mineral characterization of field samples to create maps of the distributions of clay, mica and carbonate minerals and their abundances. The Material Identification and Characterization Algorithm (MICA) was used to identify the spectrally-dominant minerals in field samples; these results were combined with ASTER data using multinomial logistic regression to map mineral distributions. X-ray diffraction (XRD)was used to quantify mineral composition in field samples. XRD results were combined with ASTER data using multiple linear regression to map mineral abundances. We testedwhether smoothing of the ASTER data to match the scale of variability of the target sample would improve model correlations. Smoothing was donewith Fixed Rank Kriging (FRK) to represent the mediumand long-range spatial variability in the ASTER data. Stronger correlations resulted using the smoothed data compared to results obtained with the original data. Highest model accuracies came from using both medium and long-range scaled ASTER data as input to the statistical models. High correlation coefficients were obtained for the abundances of calcite and mica (R2 = 0.71 and 0.70, respectively). Moderately-high correlation coefficients were found for smectite and kaolinite (R2 = 0.57 and 0.45, respectively). Maps of mineral distributions, obtained by relating ASTER data to MICA analysis of field samples, were found to characterize major soil mineral variability (overall accuracies for mica, smectite and kaolinite were 76%, 89% and 86% respectively). The results of this study suggest that the distributions of minerals and their abundances derived using FRK-smoothed ASTER data more closely match the spatial variability of soil and environmental properties at regional scale.

Remote Sensing of Environment↗
USGS1972

Interim results of geological investigations in the vicinity of the Ergani-Maden massive copper deposits near Maden, Elazig, Turkey

As a result of geologic studies and geochemical reconnaissance by Griffitts, Albers, and brier in 1969 in the Ergani-Maden district of eastern Turkey, seven areas were recommended for more detailed investigation. Two of these, here termed Areas 1 and 2, were mapped geologically and sampled geochemically in June and July 1970 by .4. E. Weissenborn, U. S. Geological Survey, and Omer Oner and Metin Sengun, Mineral Research and Exploration Institute (MTA), an agency of the Turkish Government. This study was part of a mineral exploration and training project conducted by the U. S. Geological Survey in cooperation with MTA under the auspices of the Agency for International Development, U. S. Department of State. Mapping and sampling of four of the other areas was completed in August and September by Oner and Sengun, but this report concerns only Areas 1 and 2. The geological environment in Areas 1 and 2 appears favorable for additional ore bodies of the Ergani-Maden type, which have been Turkey's most important producer of copper. Weak but distinct anomalies developed by the geochemical sampling in Area 1 adjacent to the Mihrap Dagi deposit suggest that other ore bodies maybe found along the northwesterly trend defined by the Mihrap Dagi, Arpa Meydan, Ana Yatak mines, and the Mizir Tepe prospect. Recommendations are made for 8 drill holes in Area 1 to test this possibility. Two additional holes are also recommended in Arc.: 1. Two less pronounced anomalies were developed in Area 2. Two drill holes are suggested to test them.

Elazig↗
USGS2017

Documenting mudstone heterogeneity by use of principal component analysis of X-ray diffraction and portable X-ray fluorescence data: A case study in the Triassic Shublik Formation, Alaska North Slope

Determining the chemical and mineralogical variability within fine-grained mudrocks poses analytical challenges but is potentially useful for documenting subtle stratigraphic differences in physicochemical environments that may influence petroleum reservoir properties and behavior. In this study, we investigate the utility of combining principal component analysis (PCA) of X-ray diffraction (XRD) data and portable X-ray fluorescence (pXRF) data to identify simplifying relationships within a large number of samples and subsequently evaluate a subset that encompasses the full spectrum or range of mineral and chemical variability within a vertical section. Samples were collected and analyzed from a vertical core of the Shublik Formation, a heterogeneous, phosphate-rich, calcareous mudstone-to-marl unit deposited in the Arctic Alaska Basin (AAB) during the Middle and Late Triassic. The Shublik is a major petroleum source rock in the Alaskan North Slope, and is considered a prime target for continuous self-sourced resource plays.

Conference Paper↗
USGS1994

Airborne remote sensing for geology and the environment; present and future

In 1988, a group of leading experts from government, academia, and industry attended a workshop on airborne remote sensing sponsored by the U.S. Geological Survey (USGS) and hosted by the Branch of Geophysics. The purpose of the workshop was to examine the scientific rationale for airborne remote sensing in support of government earth science in the next decade. This report has arranged the six resulting working-group reports under two main headings: (1) Geologic Remote Sensing, for the reports on geologic mapping, mineral resources, and fossil fuels and geothermal resources; and (2) Environmental Remote Sensing, for the reports on environmental geology, geologic hazards, and water resources. The intent of the workshop was to provide an evaluation of demonstrated capabilities, their direct extensions, and possible future applications, and this was the organizational format used for the geologic remote sensing reports. The working groups in environmental remote sensing chose to present their reports in a somewhat modified version of this format. A final section examines future advances and limitations in the field. There is a large, complex, and often bewildering array of remote sensing data available. Early remote sensing studies were based on data collected from airborne platforms. Much of that technology was later extended to satellites. The original 80-m-resolution Landsat Multispectral Scanner System (MSS) has now been largely superseded by the 30-m-resolution Thematic Mapper (TM) system that has additional spectral channels. The French satellite SPOT provides higher spatial resolution for channels equivalent to MSS. Low-resolution (1 km) data are available from the National Oceanographic and Atmospheric Administration's AVHRR system, which acquires reflectance and day and night thermal data daily. Several experimental satellites have acquired limited data, and there are extensive plans for future satellites including those of Japan (JERS), Europe (ESA), Canada (Radarsat), and the United States (EOS). There are currently two national airborne remote sensing programs (photography, radar) with data archived at the USGS' EROS Data Center. Airborne broadband multispectral data (comparable to Landsat MSS and TM but involving several more channels) for limited geographic areas also are available for digital processing and analysis. Narrow-band imaging spectrometer data are available for some NASA experiment sites and can be acquired for other locations commercially. Remote sensing data and derivative images, because of the uniform spatial coverage, availability at different resolutions, and digital format, are becoming important data sets for geographic information system (GIS) analyses. Examples range from overlaying digitized geologic maps on remote sensing images and draping these over topography, to maps of mineral distribution and inferred abundance. A large variety of remote sensing data sets are available, with costs ranging from a few dollars per square mile for satellite digital data to a few hundred dollars per square mile for airborne imaging spectrometry. Computer processing and analysis costs routinely surpass these expenses because of the equipment and expertise necessary for information extraction and interpretation. Effective use requires both an understanding of the current methodology and an appreciation of the most cost-effective solution.

Bulletin↗
USGS2019

Element cycling in the Middle-Late Triassic Shublik Formation: Mineralization vs. recycling of biolimiting nutrients in an unconventional resource play

The Triassic Shublik Formation in northern Alaska is one of the major source rocks in North America, having generated much of the petroleum in Prudhoe Bay and associated fields. The middle Shublik Formation, the focus of this study, is a highly phosphatic, organic-rich carbonate mudstone interval. Apatite cements can occur as phosphatic peloids, steinkerns, elongate or angular nodules, and shells or shell fragments. We propose a model whereby phosphatization is favored in early diagenetic environments that have low concentrations of dissolved iron relative to reactive organic matter in the pore water sulfate reduction zone.

Alaska↗
USGS2021

The Mars Orbiter for Resources, Ices, and Environments (MORIE) science goals and instrument trades in radar, imaging, and spectroscopy

The Mars Orbiter for Resources, Ices, and Environments (MORIE) was selected as one of NASA's 2019 Planetary Mission Concept Studies. The mission builds upon recent discoveries and current knowledge gaps linked to two primary scientific questions: (1) when did elements of the cryosphere form and how are ice deposits linked to current, recent, and ancient climate, and (2) how does the crust record the evolution of surface environments and their transition through time? Addressing these questions has emerged in numerous recent reports as a high priority in investigating the evolution of Mars as a habitable world. A subsidiary goal of the mission concept is to provide information relevant to the eventual human exploration of Mars, specifically helping to locate and quantify near-surface water ice and hydrated mineral resources. The proposed instrument suite includes polarimetric synthetic aperture radar imaging, radar sounding, high-resolution visible and infrared imaging, both short-wave and thermal-infrared spectroscopy, and multichannel wide-angle imaging. MORIE would provide novel measurements of Mars expected to lead to significant new discoveries by the first radar imaging from orbit, radar sounding directly over the poles, and mineral mapping at spatial scales that will unravel geologic sequence stratigraphy through time. The final report of the mission concept provides details on the spacecraft, orbital design, technological maturity, results from systems-level integration studies, and costs. This article is intended to expand upon the science motivation for the mission, the measurement goals and objectives, and the instrument trade space that was examined in detail during the concept study.

The Planetary Science Journal↗
USGS2016

News from the seabed: Geological characteristics and resource potential of deep-sea mineral resources

Marine minerals such as manganese nodules, Co-rich ferromanganese crusts, and seafloor massive sulfides are commonly seen as possible future resources that could potentially add to the global raw materials supply. At present, a proper assessment of these resources is not possible due to a severe lack of information regarding their size, distribution, and composition. It is clear, however, that manganese nodules and Co-rich ferromanganese crusts are a vast resource and mining them could have a profound impact on global metal markets, whereas the global resource potential of seafloor massive sulfides appears to be small. These deep-sea mineral commodities are formed by very different geological processes resulting in deposits with distinctly different characteristics. The geological boundary conditions also determine the size of any future mining operations and the area that will be affected by mining. Similarly, the sizes of the most favorable areas that need to be explored for a global resource assessment are also dependent on the geological environment. Size reaches 38 million km 2 for manganese nodules, while those for Co-rich crusts (1.7 million km 2 ) and massive sulfides (3.2 million km 2 ) are much smaller. Moreover, different commodities are more abundant in some jurisdictions than in others. While only 19% of the favorable area for manganese nodules lies within the Exclusive Economic Zone of coastal states or is covered by proposals for the extension of the continental shelf, 42% of the favorable areas for massive sulfides and 54% for Co-rich crusts are located in EEZs

Marine Policy↗
USGS1987

Mineral Resources of the Antelope Wilderness Study Area, Nye County, Nevada

At the request of the U.S. Bureau of land Management, 83,100 acres of the Antelope Wilderness Study Area (NV-4)60-231/241) was studied. In this report the studied area is called the 'wilderness study area', or simply the 'study area.' No identified mineral or energy resources occur within the study area. The southern part of the area has moderate mineral resource potential for undiscovered gold and silver, and the Woodruff Formation in the southern part of the area has high resource potential for undiscovered vanadium, zinc, selenium, molybdenum, and silver (fig. 1). This assessment is based on field geochemical studies in 1984 and 1985 by the U.S. Bureau of Mines and field geochemical studies and geologic mapping by the U.S. Geological Survey in 1984 and 1985. The remainder of the study area has low resource potential for undiscovered gold, silver, lead, zinc, manganese, tin, and molybdenum. The study area also has low resource potential for undiscovered oil and gas resources. The Antelope Wilderness Study Area is about midway between Tonopah and Eureka, Nev., in the northern Hot Creek Range and southern Antelope Range of central Nevada. It is accessible by unimproved dirt roads extending 20 mi (miles) north from U.S. Highway 6 and 40 mi south from U.S. Highway 50 (fig. 2). Most of the study area consists of rugged mountainous terrain having approximately 2,600 ft (feet) of relief. The mountain range is a block tilted gently to the east and bounded on both sides by normal faults that dip steeply to moderately west and have major displacements. Most of the study area is underlain by a thick sequence of Tertiary volcanic rocks that predominantly consist of silicic ash-flow tuff, the Windous Butte Formation. Paleozoic and lower Mesozoic (see geologic time chart in appendix) marine sediments occur along the southern margin of the study area, and lower Paleozoic rocks are exposed in the northeast corner. The areas of exposed Paleozoic-Mesozoic rocks along the southern margin of the study area have moderate mineral resource potential for gold and silver in sediment-hosted, disseminated, epithermal (low-temperature) gold-silver deposits (fig. 1). These rocks consist of folded and thrust-faulted, fine-grained clastic sediments and limestone and dolomite that locally have been brecciated and hydrothermally altered. The alteration (locally, strong silicification) and geochemical associations of these rocks indicate a favorable environment for such deposits. Exploration for disseminated gold deposits in the same geologic environment is currently being conducted just south of the study area. The remainder of the study area has low resource potential for epithermal gold and silver vein deposits in the Tertiary volcanic rocks. The Cenozoic sedimentary basins adjacent to the fault-bounded mountain block have moderate potential for petroleum resources; the study area itself has low potential for petroleum resources.

Bulletin↗
USGS1994

Black Hills hydrology study

The Black Hills area of western South Dakota is a valuable resource center. The area has attracted numerous residents and industries because of the availability of mineral, timber, agricultural, recreational, and water resources. The water resources of the area have been stressed locally by increasing population, periodic drought, and development of other resources. In response to residents' concerns about these stresses on the water resources, the Black Hills Hydrology Study was initiated in 1990 as a cooperative effort among the U.S. Geological Survey, the South Dakota Department of Environment and Natural Resources, and the West Dakota Water Development District. West Dakota represents the various local and county cooperators. This report describes the purpose, scope, approach, and status of the study and presents highlights from the first project data report produced for the study.

Open-File Report↗
USGS2010

Linking microbial and ecosystem ecology using ecological stoichiometry: a synthesis of conceptual and empirical approaches

Currently, one of the biggest challenges in microbial and ecosystem ecology is to develop conceptual models that organize the growing body of information on environmental microbiology into a clear mechanistic framework with a direct link to ecosystem processes. Doing so will enable development of testable hypotheses to better direct future research and increase understanding of key constraints on biogeochemical networks. Although the understanding of phenotypic and genotypic diversity of microorganisms in the environment is rapidly accumulating, how controls on microbial physiology ultimately affect biogeochemical fluxes remains poorly understood. We propose that insight into constraints on biogeochemical cycles can be achieved by a more rigorous evaluation of microbial community biomass composition within the context of ecological stoichiometry. Multiple recent studies have pointed to microbial biomass stoichiometry as an important determinant of when microorganisms retain or recycle mineral nutrients. We identify the relevant cellular components that most likely drive changes in microbial biomass stoichiometry by defining a conceptual model rooted in ecological stoichiometry. More importantly, we show how X-ray microanalysis (XRMA), nanoscale secondary ion mass spectroscopy (NanoSIMS), Raman microspectroscopy, and in situ hybridization techniques (for example, FISH) can be applied in concert to allow for direct empirical evaluation of the proposed conceptual framework. This approach links an important piece of the ecological literature, ecological stoichiometry, with the molecular front of the microbial revolution, in an attempt to provide new insight into how microbial physiology could constrain ecosystem processes.

Ecosystems↗
USGS1980

The distribution and mobility of uranium in glassy and zeolitized tuff, Keg Mountain area, Utah, U.S.A.

The distribution and mobility of uranium in a diagenetically altered, 8 Ma old tuff in the Keg Mountain area, Utah, are modelled in this study. The modelling represents an improvement over similar earlier studies in that it: (1) considers a large number of samples (76) collected with good geologic control and exhibiting a wide range of alteration; (2) includes radiometric data for Th, K and RaeU (radium equivalent uranium) as well as U; (3) considers mineralogic and trace-element data for the same samples; and (4) analyzes the mineral and chemical covariation by multivariate statistical methods. The variation of U in the tuff is controlled mainly by its primary abundance in glass and by the relative abundance of non-uraniferous detritus and uraniferous accessory minerals. Alteration of glass to zeolite, even though extensive, caused no large or systematic change in the bulk concentration of U in the tuff. Some redistribution of U during diagenesis is indicated by association of U with minor alteration products such as opal and hydrous Fe-Mn oxide minerals. Isotopic studies indicate that the zeolitized tuff has been open to migration of U decay products during the last 0.8 Ma. The tuff of Keg Mountain has not lost a statistically detectable fraction of its original U, even though it has a high (??? 9 ppm) trace U content and has been extensively altered to zeolite. Similar studies in a variety of geological environments are required in order to identify the particular combination of conditions most favorable for liberation and migration of U from tuffs. ?? 1980.

Chemical Geology↗
USGS1975

Map showing fluorspar deposits in Colorado

Increased fluorine consumption (U.S. Bureau of Mines, 1946-1971) coupled with limited proved reserves has stimulated extensive exploration for fluorine and intensive research into developing new sources of fluorine or substitutes. A summary of the distribution, geochemical and geologic environments, and production history of selected fluorspar occurrences, deposits, and districts is provided here with the hope that this information will help to stimulate exploration and discovery of additional fluorspar resources in Colorado to augment our dwindling domestic supply.

Colorado↗
USGS2018

Cadmium isotope fractionation during coal combustion: Insights from two U.S. coal-fired power plants

Coal combustion, one of the principal energy sources of electricity in the United States, produces over 100 million tons of coal combustion products (CCPs) per year in the U.S. The reuse and disposal of CCPs has the potential to release toxic trace elements, including cadmium (Cd), into the environment. In this study, we investigated CCPs, including bottom ash (BA), economizer fly ash (EFA), and fly ash (FA), as well as feed coal (FC) and pulverized coal (PC) collected from two U.S. coal-fired power plants in New Mexico and Ohio with different coal supplies. The New Mexico plant uses high volatile C bituminous, low-sulfur coals mined from the San Juan Basin (Cretaceous Fruitland Formation) and the Ohio plant uses high volatile A bituminous, high-sulfur central Appalachian Basin coals (Upper Pennsylvanian Monongahela Formation). Mineralogical and elemental analysis showed that these CCP samples consist of ∼70% amorphous Al-Si-rich glasses and ∼30% mineral phases of quartz (SiO 2 ) and mullite (Ai 6 Si 2 O 13 ). The Cd isotope compositions (δ 114 Cd, normalized to NIST Cd standard 3108) of FA and EFA samples (ranging from −0.51 to +0.47‰) are distinctively heavier than those of BA samples (−0.75 to −0.52‰) in both power plants. We interpret this Cd isotope difference as a result of Cd condensation from the gas phase during flue gas cooling, instead of evaporation of Cd phase during coal combustion. Cd condensation is the main process to generate the isotopically heavy Cd signatures that preferentially partition on the fine FA particles. We also investigated Cd isotope compositions in different leachate products from a series of batch-leaching experiments with these CCPs, using diluted acetic acid, hydroxyl ammonium chloride, hydrogen peroxide followed by ammonium acetate, and 5% nitric acid, as a possible means to identify CCP-released Cd in the environment. Unusually and significantly heavier Cd isotope compositions were observed in each leachate of FA samples (+1.10 to +7.09‰), which fall far outside from the range of Cd isotope ratios observed in natural soils and rocks, but less so for the EFA samples (−0.43 to +1.18‰). Such an observation is consistent with the interpretation that isotopically heavy Cd preferentially partitions on the fine FA particles after coal combustion and is readily to be released during these leaching experiments. This study demonstrates that high-temperature coal combustion can lead to a very large degree of fractionation of Cd isotopes that can be used as a unique tracer for identifying anthropogenic metal inputs in the environment. The major Cd isotope fractionation process occurs as the Cd gas phase condenses on fine FA particles during the flue gas cooling stage after coal combustion.

New Mexico, Ohio↗
USGS2010

Chemical weathering in the Loch Vale Watershed, Rocky Mountain National Park, Colorado

Mineralogic, hydrologic, and geochemical data were used to determine the source of solutes to surface waters draining the Loch Vale Watershed (LVWS), an alpine-subalpine drainage located in the Front Range of Colorado. The flux of dissolved solids from LVWS is primarily controlled by interactions between snowmelt and materials derived from the local bedrock; the biomass has only a minor effect on solute budgets except for ammonium. LVWS is underlain by Precambrian granite and gneiss, the major minerals include quartz, microcline, plagioclase, biotite, and sillimanite. Small amounts of calcite were found along hydrothermally altered zones in the bedrock. Mass balance calculations indicate that the weathering of calcite contributes nearly 40% of the cations derived within the basin. The importance of calcite weathering in LVWS is a result of its chemical reactivity and the high rate of physical erosion in this alpine environment. The average cationic denudation rate in the drainage (390 eq/ha/yr) is similar to long-term rates in forested Adirondack watersheds (500–600 eq/ha/yr), but much lower than the average for the North American Continent (3800 eq/ha/yr). Surface waters in LVWS are susceptible to acidification should acid deposition from the atmosphere increase.

Colorado↗
USGS2018

Meurigite, a new fibrous iron phosphate resembling kidwellite

Meurigite is a new hydrated potassium iron phosphate related to kidwellite and with structural similarities to other late-stage fibrous ferric phosphate species. It has been found at four localities so far — the Santa Rita mine, New Mexico, U.S.A.; the Hagendorf-Sud pegmatite in Bavaria, Germany; granite pegmatite veins at Wycheproof, Victoria, Australia; and at the Gold Quarry Mine, Nevada, U.S.A. The Santa Rita mine is the designated type locality. Meurigite occurs as tabular, elongated crystals forming spherical and hemispherical clusters and drusy coatings. The colour ranges from creamy white to pale yellow and yellowish brown. At the type locality, the hemispheres may reach 2 mm across, but the maximum diameter reached in the other occurrences is usually less than 0.5 mm. A wide variety of secondary phosphate minerals accompanies meurigite at each locality, with dufrenite, cyrilovite, beraunite, rockbridgeite and leucophosphite amongst the most common. Vanadates and uranates occur with meurigite at the Gold Quarry mine. Electron microprobe analysis and separate determination of H 2 O and CO 2 on meurigite from the type locality gave a composition for which several empirical formulae could be calculated. The preferred formula, obtained on the basis of 35 oxygen atoms, is which simplies Qualitative analyses only were obtained for meurigite from the other localities, due to the softness and openness of the aggregates. Because of the fibrous nature of meurigite, it was not possible to determine the crystal structure, hence the exact stoichiometry remains uncertain. The lustre of meurigite varies from vitreous to waxy for the Santa Rita mine mineral, to silky for the more open sprays and internal surfaces elsewhere. The streak is very pale yellow to cream and the estimated Mohs hardness is about 3. Cleavage is perfect on {001} and fragments from the type material have a mean specific gravity of 2.96. The strongest lines in the X-ray powder pattern for the type material are ( d obs , I obs , hkl ) 3.216(100)404; 4.84(90)111; 3.116(80)205; 4.32(70)112; 9.41(60)201; 3.470(60)800. The X-ray data were indexed on the basis of a monoclinic unit cell determined from electron diffraction patterns. The cell parameters, refined by least squares methods, are a = 29.52(4), b = 5.249(6), c = 18.26(1) Å, β = 109.27(7)°, V = 2672(3) Å 3 , and Z = 4. The calculated density is 2.89 gcm −3 . The space group is either C 2, Cm or C 2 / m . X-ray powder data for meurigite are closely similar to those for kidwellite and phosphofibrite, but meurigite appears to be characterised by a strong 14 Å reflection. The relationship between these three minerals remains uncertain in the absence of structural data. On the available evidence, meurigite and kidwellite are not the respective K and Na-endmembers of a solid solution series. The meurigite cell parameters suggest it belongs to a structural family of fibrous ferric phosphates, such as rockbridgeite, dufrenite and beraunite, which have a discrete 5 Å fibre axis. Meurigite occurs in widely varying environments, its formation probably favoured by late-stage solutions rich in K rather than Na.

Mineralogical Magazine↗
USGS2008

Reconnaissance study of water quality in the mining-affected Aries River Basin, Romania

The Aries River basin of western Romania has been subject to mining activities as far back as Roman times. Present mining activities are associated with the extraction and processing of various metals including Au, Cu, Pb, and Zn. To understand the effects of these mining activities on the environment, this study focused on three objectives: (1) establish a baseline set of physical parameters, and water- and sediment-associated concentrations of metals in river-valley floors and floodplains; (2) establish a baseline set of physical and chemical measurements of pore water and sediment in tailings; and (3) provide training in sediment and water sampling to personnel in the National Agency for Mineral Resources and the Rosia Poieni Mine. This report summarizes basin findings of physical parameters and chemistry (sediment and water), and ancillary data collected during the low-flow synoptic sampling of May 2006.

Aries River Basin↗