Cadmium isotope fractionation during coal combustion: Insights from two U.S. coal-fired power plants

Fotio Fouskas; Ma Lin; Mark A. Engle; Leslie F. Ruppert; Nicholas J. Geboy; Matthew A. Costa

doi:10.1016/j.apgeochem.2018.06.007

Home/Archive/USGS

USGS · 70206816

Cadmium isotope fractionation during coal combustion: Insights from two U.S. coal-fired power plants

Fotio Fouskas·Ma Lin·Mark A. Engle·Leslie F. Ruppert·Nicholas J. Geboy·Matthew A. Costa

View original source ↗Export metadata ↓

Abstract

Coal combustion, one of the principal energy sources of electricity in the United States, produces over 100 million tons of coal combustion products (CCPs) per year in the U.S. The reuse and disposal of CCPs has the potential to release toxic trace elements, including cadmium (Cd), into the environment. In this study, we investigated CCPs, including bottom ash (BA), economizer fly ash (EFA), and fly ash (FA), as well as feed coal (FC) and pulverized coal (PC) collected from two U.S. coal-fired power plants in New Mexico and Ohio with different coal supplies. The New Mexico plant uses high volatile C bituminous, low-sulfur coals mined from the San Juan Basin (Cretaceous Fruitland Formation) and the Ohio plant uses high volatile A bituminous, high-sulfur central Appalachian Basin coals (Upper Pennsylvanian Monongahela Formation). Mineralogical and elemental analysis showed that these CCP samples consist of ∼70% amorphous Al-Si-rich glasses and ∼30% mineral phases of quartz (SiO 2 ) and mullite (Ai 6 Si 2 O 13 ). The Cd isotope compositions (δ 114 Cd, normalized to NIST Cd standard 3108) of FA and EFA samples (ranging from −0.51 to +0.47‰) are distinctively heavier than those of BA samples (−0.75 to −0.52‰) in both power plants. We interpret this Cd isotope difference as a result of Cd condensation from the gas phase during flue gas cooling, instead of evaporation of Cd phase during coal combustion. Cd condensation is the main process to generate the isotopically heavy Cd signatures that preferentially partition on the fine FA particles. We also investigated Cd isotope compositions in different leachate products from a series of batch-leaching experiments with these CCPs, using diluted acetic acid, hydroxyl ammonium chloride, hydrogen peroxide followed by ammonium acetate, and 5% nitric acid, as a possible means to identify CCP-released Cd in the environment. Unusually and significantly heavier Cd isotope compositions were observed in each leachate of FA samples (+1.10 to +7.09‰), which fall far outside from the range of Cd isotope ratios observed in natural soils and rocks, but less so for the EFA samples (−0.43 to +1.18‰). Such an observation is consistent with the interpretation that isotopically heavy Cd preferentially partitions on the fine FA particles after coal combustion and is readily to be released during these leaching experiments. This study demonstrates that high-temperature coal combustion can lead to a very large degree of fractionation of Cd isotopes that can be used as a unique tracer for identifying anthropogenic metal inputs in the environment. The major Cd isotope fractionation process occurs as the Cd gas phase condenses on fine FA particles during the flue gas cooling stage after coal combustion.

Explore related subjects

Applied Geochemistry Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Fotio Fouskas, Ma Lin, Mark A. Engle, Leslie F. Ruppert, Nicholas J. Geboy, Matthew A. Costa. 2018. Cadmium isotope fractionation during coal combustion: Insights from two U.S. coal-fired power plants. https://doi.org/10.1016/j.apgeochem.2018.06.007

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Elemental and isotope geochemistry of Smackover Formation brines in Alabama and Arkansas: Implications for fluid mixing and water-rock interaction

This study investigates the geochemical characteristics of brines within the Upper Jurassic Smackover Formation in Alabama and Arkansas through elemental and isotopic analyses and geochemical modeling to reveal the extent and nature of fluid mixing and water-rock interactions. Smackover Formation brines exhibit Na-Cl-Ca hydrogeochemical facies and sulfate depletion relative to seawater. Lower sulfate concentrations, coupled with high H 2 S concentrations in some brines (0-364 mg/L) at temperatures >80°C, suggest that thermochemical sulfate reduction occurred. Cl/Br and Na/Br ratios indicate that salinity was controlled by the mixing of meteoric water with evaporated seawater that had reached halite saturation, rather than by halite dissolution. The δ 18 O and δ 2 H values of the brines also suggest mixing between meteoric water and evaporated seawater that had reached gypsum and halite saturation. Geochemical modeling of seawater evaporation predicts a Cl-Na or Cl-Mg facies after halite saturation, contrasting with the observed Cl-Ca dominance of the Smackover Formation brines. The Ca-enriched brines may have evolved from Cl-Mg-dominated evaporated seawater through dolomitization of limestone. The 87 Sr/ 86 Sr ratios range from 0.70740 to 0.71048, higher than the average of Jurassic seawater (0.707). The non-linear relationship between 87 Sr/ 86 Sr and 1000/Sr suggests alteration of brine geochemistry by fluid mixing or by inputs from Sr and 87 Sr-enriched rock sources. Lithium concentrations are positively correlated with 87 Sr/ 86 Sr ratios and TDS in brines enriched in these constituents. These correlations suggest deeper-seated geogenic sources and have implications for Li exploration in the northern Gulf Coast basin. Normal faults associated with the pre-Jurassic topography may have provided potential pathways for brine migration into the Smackover Formation under the influence of overpressure or thermohaline convection in the Gulf Coast.

Alabama↗

USGS2026

Evaluating drivers of environmental change in a lake sediment core: Insights from spectroscopic metrics of water-extractable organic matter and stable carbon isotopes

Freshwater lakes play a critical role in the global carbon cycle by storing and transforming organic matter (OM) from both terrestrial and aquatic sources. Small lakes in northern temperate regions, despite their limited surface area, disproportionately influence regional carbon budgets. Buried sediments integrate OM inputs over time and archive ecosystem responses to natural and anthropogenic disturbances. However, the direction and magnitude of recent environmental changes on sediment carbon (C) dynamics remain poorly understood. A 23-cm core was collected from a small temperate lake in northeastern USA to evaluate sediment OM content and composition over timescales relevant to historical land-use change, damming, and recovery from acid deposition. Patterns in OM burial and source contributions were revealed via elemental and isotopic analyses of bulk OM and ultraviolet-visible spectrophotometry of water-extractable organic matter (WEOM). The optical metrics expanded observations of likely OM sources beyond the information gained from bulk carbon metrics (total carbon, δ 13 C). The aromaticity of WEOM increased downcore, which is consistent with a shift from increased terrestrial inputs during early logging and damming activity (pre ∼1920) to more microbial-derived OM in recent surficial sediments. Future applications of WEOM optical properties as complements to traditional geochemical metrics can enhance interpretations of lake ecosystem responses recorded in lake sediments to environmental perturbations in temperate lakes.

New York↗

USGS2026

Erosion and transport of sediments in watersheds of southwest Puerto Rico determined from strontium isotopes and mixing models

Sediment outflow from streams to coastal regions can adversely affect water quality and the health of ecosystems including Puerto Rico's southwestern carbonate platform with shallow marine communities. Knowledge of sediment provenance and erosional areas would aid effective restoration to reduce excessive sedimentation. Strontium (Sr) isotopic ratios ( 87 Sr/ 86 Sr) can be used to differentiate between sediment eroded into streams from different lithologies, or rock types, and used in mixing models to estimate proportions of source materials in downstream mixtures. The goal of this study was to use Sr isotopes to differentiate between river sediments in drainages with distinct geologies and present a case study where Sr isotope mixing models are used to identify sediment sourcing to Río Loco and Bahía de Guánica, a priority watershed of the U.S. Coral Reefs Task Force. For the Río Loco watershed, model results indicate that serpentinites in the uplands contributed approximately 71 % of sediment to Bahía de Guánica. About 21 % of sediment was from trachy-andesitic basalts in the foothills, and the remaining 8 % originated from sources on the coastal plain. Neither the uppermost headwater region of Río Loco, the Canal Principal De Riego Valle De Lajas, nor the tributary Quebrada Susúa appeared to be significant sources of sediment to Río Loco's mainstem or Bahía de Guánica at the time of the study. Our results demonstrate that sediment from the serpentinite-bearing areas of Río Loco watershed was effectively transported to the lowlands, which then discharge into Guánica Bay, and highlight the potential use of Sr isotopes as tracers of sediment provenance. This will, in turn, enable better science-based restoration efforts aimed at reducing terrestrial sediment erosion and impacts to marine ecosystems.

Puerto Rico↗