SEARCH · Geology Reports

Results for “Journal of Interpretation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37Linked to original sources

USGS2022

African penguins and localized fisheries management: Response to Butterworth and Ross-Gillespie

We present a response to Butterworth and Ross-Gillespie's (2022) comment on our perspectives on how forage fish fisheries are impacting the endangered African penguin ( Sphenicus demersus ), and corresponding management options. Butterworth and Ross-Gillespie overstate model uncertainties and downplay the clear ecological and conservation significance of the fisheries closure experiment. We demonstrate that their criticism of “pseudo-replication” is weak, and not in line with their own analyses nor with the interpretations of many international scientific review panels commissioned by the government of South Africa to evaluate experimental results. Their comment does not alter our fundamental conclusions that forage fisheries operating near penguin breeding colonies compete with the birds for food resources, are detrimental to the penguin's population health, and are impeding recovery. Given that sardines are depleted (DFFE, 2021) and the African penguin is approaching a conservation crisis, we reiterate our position that continuing the precautionary approach of closures at the local scale of central-place foraging penguins is warranted to facilitate their population growth under fisheries management goals to conserve and maintain ecosystem functions.

ICES Journal of Marine Science↗

USGS2017

Deformation of the Batestown till of the Lake Michigan lobe, Laurentide ice sheet

Deep, pervasive shear deformation of the bed to high strains (>100) may have been primarily responsible for flow and sediment transport of the Lake Michigan lobe of the Laurentide ice sheet. To test this hypothesis, we sampled at 0.2 m increments a basal till from one advance of the lobe (Batestown till) along vertical profiles and measured fabrics due to both anisotropy of magnetic susceptibility and sand-grain preferred orientation. Unlike past fabric studies, interpretations were guided by results of laboratory experiments in which this till was deformed in simple shear to high strains. Fabric strengths indicate that more than half of the till sampled has a <5% probability of having been sheared to moderate strains (7-30). Secular changes in fabric azimuth over the thickness of the till, probably due to changing ice-flow direction as the lobe receded, indicate that the bed accreted with time and that the depth of deformation of the bed did not exceed a few decimeters. Orientations of principal magnetic susceptibilities show that the state of strain was commonly complex, deviating from bed-parallel simple shear. Deformation is inferred to have been focused in shallow, temporally variable patches during till deposition from ice.

Journal of Glaciology↗

USGS1993

Structural analysis of sheath folds in the Sylacauga Marble Group, Talladega slate belt, southern Appalachians

Remnant blocks of marble from the Moretti-Harrah dimension-stone quarry provide excellent exposure of meter-scale sheath folds. Tubular structures with elliptical cross-sections (4 ≤ R yz ≤ 5) are the most common expression of the folds. The tubes are elongate subparallel to stretching lineation and are defined by centimeter-scale layers of schist. Eccentrically nested elliptical patterns and opposing asymmetry of folds (‘S’ and ‘Z’) are consistent with the sheath-fold interpretation. Sheath folds are locally numerous in the Moretti-Harrah quarry but are not widely distributed in the Sylacauga Marble Group; reconnaissance in neighboring quarries provided no additional observations. The presence of sheath folds in part of the Talladega slate belt indicates a local history of plastic, non-coaxial deformation. Such a history of deformation is substantiated by petrographic study of an extracted hinge from the Moretti-Harrah quarry. The sheath folds are modeled as due to passive amplification of initial structures during simple shear, using both analytic geometry and graphic simulation. As indicated by these models, relatively large shear strains ( y ≥ 9) and longitudinal initial structures are required. The shear strain presumably relates to NW-directed displacement of overlying crystalline rocks during late Paleozoic orogeny.

Journal of Structural Geology↗

USGS2012

Crustal structure and composition of the southern Foothills Metamorphic Belt, Sierra Nevada, California, from seismic data

The Foothills Metamorphic Belt is an accreted terrane consisting of Paleozoic and Mesozoic metamorphic rocks that separates the Great Valley from the Sierra Nevada batholith in northern and central California. Until recently, the only available geophysical data for this area were reconnaissance refraction surveys, and gravity and magnetic data. New insights into the structure of the deep crust are provided by the interpretation of a seismic reflection profile (CC‐2), acquired in 1984 by the U.S. Geological Survey at the southern end of the Foothills Metamorphic Belt. Our interpretation is constrained by a new seismic velocity model derived from coincident microearthquake data. Earthquake hypocenters that occur at unusually great depths of 12 to 30 km make the data set particularly useful for obtaining deep crustal velocity information. The velocity model shows velocities of 5.2 to 6.3 km s −1 for the upper 12 km of the crust, and 6.7 to 6.8 km s −1 from 12 km to an estimated Moho at 32 km. The upper crustal velocities correspond to metamorphic rocks and serpentinites of the Foothills Metamorphic Belt as well as to diorites and granodiorites of the Sierra Nevada batholith, while the lower crustal velocities are interpreted to represent intermediate to mafic granulites. The majority of the earthquake hypocenters as well as a 6.7 km s −1 layer in the velocity model corresponds in depth to thick zones of west dipping midcrustal reflections that may represent major shear zones formed during the late Jurassic Nevadan orogeny or synbatholithic ductile shear zones that accommodated crustal extension associated with batholith intrusion. These reflections are truncated updip by an inferred subvertical contact that coincides with the western edge of the Sierra Nevada batholith and the southward trace of the Bear Mountains fault zone. The updip truncation of midcrustal shear zones and high lower crustal velocities indicate that strike‐slip faulting and magmatic underplating can be important processes during the docking and welding of an accreted terrane.

California↗

USGS2012

The Redskin granite: Evidence for thermogravitational diffusion in a Precambrian granite batholith

The 1000-Ma-old composite Pikes Peak batholith consists largely of medium- to coarse-grained biotite granite but is intruded by several smaller granite plutons. Two of these, the Tarryall Mountains batholith and the Redskin Granite (Hawley, 1969; Hawley and Wobus, 1977), are here interpreted as cupolas atop the main mass of the Pikes Peak batholith. Chemical analysis for 38 elements in rocks from the Redskin Granite, the Tarryall Mountains batholith, and the biotite granite of the Pikes Peak batholith support the contention that the compositions of the smaller plutons are unlikely to have evolved from that of the main mass of the batholith by crystal fractionation. It is believed that these compositions arose through liquid-state fractionation processes, possibly the convection-aided thermogravitational model of Shaw et al. (1976). It is important to recognize that the chemical signature of this fractionation process can be discerned in holocrystalline rocks as well as in their glassy equivalents because the process may be instrumental in the formation of some kinds of lithophile ore deposits.

Journal of Geophysical Research Solid Earth↗

USGS2003

The Hula Valley subsurface structure inferred from gravity data

We use the 3-D gravity inversion technique to model the shape of the Hula basin, a pull-apart basin along the Dead Sea Transform. The interpretation was constrained using the Notera-3-well density logs and current geological knowledge. The model obtained by inversion shows a rhomb-shaped graben filled with approximately 4 km of young sediments in the deepest part of the basin. The reliability of this model was verified using 3-D forward modeling with an accuracy of 0.5 km. Curvature attributes of the gravity field depict the main fault pattern, suggesting that the Hula basin is a subsiding rhomb-shaped graben, bordered by steep-sided, deep basement faults on the western and eastern sides (Qiryat Shemona and Jordan River faults) and by gradual, en-echelon step faults on the southern and northern margins of the basin. ?? 2003 Laser Pages Publishing Ltd.

Israel Journal of Earth Sciences↗

USGS1983

Characteristic analysis-1981: Final program and a possible discovery

The latest ornewest version of thecharacteristicanalysis (NCHARAN)computer program offers the exploration geologist a wide variety of options for integrating regionalized multivariate data. The options include the selection of regional cells for characterizing deposit models, the selection of variables that constitute the models, and the choice of logical combinations of variables that best represent these models. Moreover, the program provides for the display of results which, in turn, makes possible review, reselection, and refinement of a model. Most important, the performance of the above-mentioned steps in an interactive computing mode can result in a timely and meaningful interpretation of the data available to the exploration geologist. The most recent application of characteristic analysis has resulted in the possible discovery of economic sulfide mineralization in the Grong area in central Norway. Exploration data for 27 geophysical, geological, and geochemical variables were used to construct a mineralized and a lithogeochemical model for an area that contained a known massive sulfide deposit. The models were applied to exploration data collected from the Gjersvik area in the Grong mining district and resulted in the identification of two localities of possible mineralization. Detailed field examination revealed the presence of a sulfide vein system and a partially inverted stratigraphic sequence indicating the possible presence of a massive sulfide deposit at depth. ?? 1983 Plenum Publishing Corporation.

Journal of the International Association for Mathe↗

USGS2021

The Independent Volcanic Eruption Source Parameter Archive (IVESPA, version 1.0): A new observational database to support explosive eruptive column model validation and development

Eruptive column models are powerful tools for investigating the transport of volcanic gas and ash, reconstructing past explosive eruptions, and simulating future hazards. However, the evaluation of these models is challenging as it requires independent estimates of the main model inputs (e.g. mass eruption rate) and outputs (e.g. column height). There exists no database of independently estimated eruption source parameters (ESPs) that is extensive, standardized, maintained, and consensus-based. This paper introduces the Independent Volcanic Eruption Source Parameter Archive (IVESPA, ivespa.co.uk), a community effort endorsed by the International Association of Volcanology and Chemistry of the Earth’s Interior (IAVCEI) Commission on Tephra Hazard Modelling. We compiled data for 134 explosive eruptive events, spanning the 1902-2016 period, with independent estimates of: i) total erupted mass of fall deposits; ii) duration; iii) eruption column height; and iv) atmospheric conditions. Crucially, we distinguish plume top versus umbrella spreading height, and the height of ash versus sulphur dioxide injection. All parameter values provided have been vetted independently by at least two experts. Uncertainties are quantified systematically, including flags to describe the degree of interpretation of the literature required for each estimate. IVESPA also includes a range of additional parameters such as total grain size distribution, eruption style, morphology of the plume (weak versus strong), and mass contribution from pyroclastic density currents, where available. We discuss the future developments and potential applications of IVESPA and make recommendations for reporting ESPs to maximize their usability across different applications. IVESPA covers an unprecedented range of ESPs and can therefore be used to evaluate and develop eruptive column models across a wide range of conditions using a standardized dataset.

Journal of Volcanology and Geothermal Research↗

USGS2000

The enigma of the Arthur's Pass, New Zealand, earthquake: 1. Reconciling a variety of data for an unusual earthquake sequence

The 1994 Arthur's Pass earthquake ( M W 6.7) is the largest in a recent sequence of earthquakes in the central South Island, New Zealand. No surface rupture was observed, the aftershock distribution was complex, and routine methods of obtaining the faulting orientation of this earthquake proved contradictory. We use a range of data and techniques to obtain our preferred solution, which has a centroid depth of 5 km, M 0 =1.3 × 10 19 N m, and a strike, dip, and rake of 221°, 47°, 112°, respectively. Discrepancies between this solution and the Harvard centroid moment tensor, together with the Global Positioning System (GPS) observations and unusual aftershock distribution, suggest that the rupture may not have occurred on a planar fault. A second, strike slip, subevent on a more northerly striking plane is suggested by these data but neither the body wave modeling nor regional broadband recordings show any complexity or late subevents. We relocate the aftershocks using both one-dimensional and three-dimensional velocity inversions. The depth range of the aftershocks (1–10 km) agrees well with the preferred mainshock centroid depth. The aftershocks near the hypocenter suggest a structure dipping toward the NW, which we interpret to be the mainshock fault plane. This structure and the Harper fault, ∼15 km to the south, appear to have acted as boundaries to the extensive aftershock zone trending NNW-SSE. Most of the M L ≥ 5 aftershocks, including the two largest ( M L 6.1 and M L 5.7), clustered near the Harper fault and have strike slip mechanisms consistent with motion on this fault and its conjugates. Forward modeling of the GPS data suggests that a reverse slip mainshock, combined with strike slip aftershock faulting in the south, is able to match the observed displacements. The occurrence of this earthquake sequence implies that the level of seismic hazard in the central South Island is greater than previous estimates.

Arthur's Pass↗

USGS2010

Supraslab earthquake clusters above the subduction plate boundary offshore Sanriku, northeastern Japan: Seismogenesis in a graveyard of detached seamounts?

Thousands of offshore repeating earthquakes with low‐angle thrust focal mechanisms occur along the subduction plate boundary of NE Japan. Double‐difference relocation methods using P ‐ and S ‐wave arrivals reveal clusters of events above these repeating events. To assure good depth control we restrict our study to events that are close to seismic stations. These “supraslab” earthquake clusters are regional features at depths of 25 to 50 km, and most of these clusters are below the depth of the forearc Moho, which we determined from converted waves. Seismicity over this depth range does not occur under the inland area of NE Japan except just below the vicinity of the arc volcanoes. Re‐entrants in the inner trench slope indicate that repeated collisions of seamounts have occurred in the past. Our preliminary interpretation of supraslab clusters is that they represent seismicity in seamounts detached from the Pacific plate during slab descent, driven by the resistance of seamounts to subduction. Detachment during slab descent probably occurs on the sedimented and hydrothermally altered seafloor on which seamounts were originally constructed since these are known as zones of weakness during active island growth. High fluid pressure produced during dehydration of clay minerals and other low‐temperature hydrous minerals could enable detachment at depths. Seamount crust is thus accreted to forearcs, possibly leading to a long‐term component of near‐coastal uplift. Supraslab earthquake clusters may be our most direct evidence of the fates of seamounts and suggest that tectonic underplating is actively occurring in this subduction system.

Northeastern Japan↗

USGS2012

Enhanced visualization for the interpretation of Magellan radar data: Supplement to the Magellan special issue

The differences of radar data from more familiar photographic images, coupled with the unique geologic characteristics of Venus's surface, can make interpretation of the standard Magellan data products difficult for both planetary scientists and nonspecialists. We describe a set of digital processing techniques for transforming individual remote‐sensing datasets in order to make the information they contain more apparent, and for combining multiple datasets of diverse resolution and information content into synthetic images that allow the viewer to explore correlations among the data. The creation of derived data products by techniques like those we describe is becoming increasingly widespread and important, both for scientific research and for use in educational and media presentations. We apply our processing techniques to Magellan synthetic aperture radar images, altimetry, and microwave emissivity measurements of four areas that exemplify some of the most important styles of geologic activity on Venus.

Journal of Geophysical Research E: Planets↗

USGS2001

Garnet granulite xenoliths from the Northern Baltic shield: The underplated lower crust of a palaeoproterozoic large igneous province

Garnet granulite facies xenoliths hosted in Devonian lamprophyres from the Kola Peninsula are interpreted to represent the high-grade metamorphic equivalents of continental flood tholeiites, emplaced into the Baltic Shield Archaean lower crust in early Proterozoic time. Geochronological data and similarities in major and trace element geochemistry suggest that the xenoliths formed during the same plume-related magmatic event that created a widespread Palaeoproterozoic large igneous province (LIP) at 2·4–2·5 Ga. They are, thus, the first samples of the lower crust of a Palaeoproterozoic LIP to be studied in petrological detail. The suite includes mafic granulites (gar + cpx + rutile ± plag ± opx ± phlog ± amph), felsic granulites (plag + gar + cpx + rutile ± qtz ± Kspar ± phlog ± amph) and pyroxenites (± phlog ± amph), but mafic garnet granulites predominate. Although some samples are restites, there is no evidence for a predominance of magmatic cumulates, as is common for Phanerozoic lower-crustal xenolith suites. Metasediments are also absent. Phlogopite and/or amphibole occur in xenoliths of all types and are interpreted to be metasomatic in origin. The K-rich metasomatic event occurred at ∼2·0 Ga, and led to substantial enrichment in Rb, K, LREE/HREE, Th/U, Th/Pb and, to a lesser extent, Nb and Ti. The fluids responsible for this metasomatism were probably derived from a second plume that arrived beneath the region at this time. Evidence for partial melting of mafic crust exists in the presence of migmatitic granulites. The timing of migmatization overlaps that of metasomatism, and it is suggested that migmatization was facilitated by the metasomatism. The metamorphism, metasomatism and migmatization recorded in the Kola granulite xenoliths may be representative of the processes responsible for converting Archaean LIP-generated proto-continents into continental crust.

Elovy Island, Kandalaksha Gulf, Kola Peninsula, Wh↗

USGS2020

In situ measurements of compressional wave speed during gravity coring operations in the New England mud patch

This paper presents measurements of sediment sound-speed profiles measured in situ using the acoustic coring system (ACS). The reported measurements were obtained from seven gravity cores collected in the New England Mud Patch. The ACS uses two sets of transducers mounted below the penetrating tip of a sediment corer to make in situ measurements of geoacoustic properties as the corer penetrates the seabed. The in situ sound-speed profiles are interpreted in the context of stratigraphic layering measured by a seismic survey, and the measured sound-speed profiles are consistent with the geophysical description. The in situ sound-speed profiles measured by the ACS were compared to conventional measurements of sound speed on the recovered cores using the multisensor core logger (MSCL). The MSCL data displayed both random and systematic errors that were attributed to disturbance from the coring process and/or the handling of the sediments after collection. Finally, using porosity and grain size distributions measured from discrete samples of the cored sediments, the in situ sound-speed measurements were compared to empirical regressions based on independent data sets.

Atlantic Ocean, New England Mud Patch↗

USGS2020

Development and testing of species-specific quantitative PCR assays for environmental DNA applications

New, non-invasive methods for detecting and monitoring species presence are being developed to aid in fisheries and wildlife conservation management. The use of environmental DNA (eDNA) samples for detecting macrobiota is one such group of methods that is rapidly becoming popular and being implemented in national management programs. Here we focus on the development of species-specific targeted assays for probe-based quantitative PCR (qPCR) applications. Using probe-based qPCR offers greater specificity than is possible with primers alone. Furthermore, the ability to quantify the amount of DNA in a sample can be useful in our understanding of the ecology of eDNA and the interpretation of eDNA detection patterns in the field. Careful consideration is needed in the development and testing of these assays to ensure the sensitivity and specificity of detecting the target species from an environmental sample. In this protocol we will delineate the steps needed to design and test probe-based assays for the detection of a target species; including creation of sequence databases, assay design, assay selection and optimization, testing assay performance, and field validation. Following these steps will help achieve an efficient, sensitive, and specific assay that can be used with confidence. We demonstrate this process with our assay designed for populations of the mucket ( Actinonaias ligamentina ), a freshwater mussel species found in the Clinch River, USA.

JOVE Journal Of Visualized Experiments↗

USGS2012

An interpretation of episodic slip on the Calaveras fault near Hollister, California

Data from a precision multi-wavelength distance measuring (MWDM) instrument, located near Hollister, California, have been analyzed in terms of strike-slip faulting in the region covered by the network. Four episodes of deformation that are readily identifiable in the MWDM data for the year following September 1975 can be modeled as slip on the Calaveras fault. Creepmeter data tend to support this interpretation, since the creep events and the observed episodes of deformation appear to be correlated in a temporal sense. Lower bounds on the moment for each episode of slip can be determined from the MWDM data by the technique of linear programing. The results indicate that aseismic slip is the dominant mechanism for strain release, since the combined moment of 1.16 × 10 24 dyn cm for the four episodes far exceeds the moment of all of the earthquakes that occurred during the year. Creepmeter data and geologic evidence that are taken in conjunction with the lower bound of the moment indicate that the depth of aseismic slip for some of the episodes of fault slip could extend to below the greatest depth of earthquake hypocenters for this region of central California.

Journal of Geophysical Research Solid Earth↗

USGS1973

Concepts of karst development in relation to interpretation of surface runoff

Some unusual characteristics of streamflow occur in regions underlain by carbonate rocks. The streamflow characteristics are related to processes of karstification, these processes being dependent on circulation of subsurface water and solution of the rock to form characteristic topography and underground cavern systems. Very highly cavernous and permeable unsaturated zones tend to keep the water table depressed below land surface in many karst regions, a condition that leads to a low density of perennial streams. The uneven distribution of permeability beneath surface karst streams causes them to lose or gain water, depending on the position of the water table with reference to stream level. The conventional techniques of interpolation and extrapolation that have been reasonably successful in approximating streamflow of ungaged sites in nonkarstic regions have only limited use in karst regions. An understanding of principles of karstification and an understanding of the hydrogeologic framework of a carbonate terrane provide a useful basis for evaluating the streamflow characteristics.

Journal of Research of the U.S. Geological Survey↗

USGS2006

Inferences about winter temperatures and summer rains from the late Quaternary record of C 4 perennial grasses and C 3 desert shrubs in the northern Chihuahuan Desert

Late Quaternary histories of two North American desert biomes—C 4 grasslands and C 3 shrublands—are poorly known despite their sensitivity and potential value in reconstructing summer rains and winter temperatures. Plant macrofossil assemblages from packrat midden series in the northern Chihuahuan Desert show that C 4 grasses and annuals typical of desert grassland persisted near their present northern limits throughout the last glacial-interglacial cycle. By contrast, key C 3 desert shrubs appeared somewhat abruptly after 5000cal.yrBP. Bioclimatic envelopes for select C 4 and C 3 species are mapped to interpret the glacial-interglacial persistence of desert grassland and the mid-to-late Holocene expansion of desert shrublands. The envelopes suggest relatively warm Pleistocene temperatures with moist summers allowed for persistence of C 4 grasses, whereas winters were probably too cold (or too wet) for C 3 desert shrubs. Contrary to climate model results, core processes associated with the North American Monsoon and moisture transport to the northern Chihuahuan Desert remained intact throughout the last glacial-interglacial cycle. Mid-latitude effects, however, truncated midsummer (July-August) moisture transport north of 35° N. The sudden expansion of desert shrublands after 5000cal.yrBP may be a threshold response to warmer winters associated with increasing boreal winter insolation, and enhanced El Niño-Southern Oscillation variability.

Arizona, New Mexico, Texas↗

USGS2007

Geology and geochronology of the Spirit Mountain batholith, southern Nevada: Implications for timescales and physical processes of batholith construction

The Spirit Mountain batholith (SMB) is a ∼ 250 km2 composite silicic intrusion located within the Colorado River Extensional Corridor in southernmost Nevada. Westward tilting of 40–50° has exposed a cross-section from the roof through deep levels of the batholith. Piecemeal construction is indicated by zircon geochronology, field relations, and elemental geochemistry. Zircon U/Pb data (SHRIMP) demonstrates a ∼ 2 million year (17.4–15.3 Ma) history for the SMB. Individual samples contain zircons with ages that span the lifetime of the batholith, suggesting recycling of extant zircon into new magma pulses. Field relations reveal several distinct intrusive episodes and suggest a common injection geometry of stacked horizontal sheets. The largest unit of the SMB is a gradational section (from roof downward) of high-silica leucogranite through coarse granite into foliated quartz monzonite. Solidification of this unit spans most of the history of the batholith. The 25 km × 2 km leucogranite was emplaced incrementally as subhorizontal sheets over most or all of the history of this section, suggesting repeated fractional crystallization and melt segregation events. The quartz monzonite and coarse granite are interpreted to be cumulate residuum of this fractionation. Age data from throughout this gradational unit show multiple zircon populations within individual samples. Subsequent distinct intrusions that cut this large unit, which include minor populations of zircons that record the ages of earlier events in construction of the batholith, preserve a sheeted, sill-on-sill geometry. We envision the SMB to have been a patchwork of melt-rich, melt-poor, and entirely solid zones throughout its active life. Preservation of intrusion geometries and contacts depended on the consistency of the host rock. Zircons recycled into new pulses of magma document remobilization of previously emplaced crystal mush, suggesting the mechanisms by which evidence for initial construction of the batholith became blurred.

Nevada↗