SEARCH · Geology Reports

Results for “Spectroscopy”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

619 records · Page 35Linked to original sources

USGS1985

Statistical evaluation of an inductively coupled plasma atomic emission spectrometric method for routine water quality testing

In an interlaboratory test, inductively coupled plasma atomic emission spectrometry (ICP-AES) was compared with flame atomic absorption spectrometry and molecular absorption spectrophotometry for the determination of 17 major and trace elements in 100 filtered natural water samples. No unacceptable biases were detected. The analysis precision of ICP-AES was found to be equal to or better than alternative methods. Known-addition recovery experiments demonstrated that the ICP-AES determinations are accurate to between plus or minus 2 and plus or minus 10 percent; four-fifths of the tests yielded average recoveries of 95-105 percent, with an average relative standard deviation of about 5 percent.

Applied Spectroscopy↗

USGS1986

System optimization for the automatic simultaneous determination of arsenic, selenium, and antimony, using hydride generation introduction to an inductively coupled plasma

A fixed-size simplex has been used to determine the optimum conditions for the simultaneous determination of arsenic, selenium, and antimony by hydride generation and inductively coupled plasma emission spectrometry. The variables selected for the simplex were carrier gas flow rate, rf power, viewing height, and reagent conditions. The detection limit for selenium was comparable to the preoptimized case, but there were twofold and fourfold improvements in the detection limits for arsenic and antimony, respectively. Precision of the technique was assessed with the use of artificially prepared water samples.

Applied Spectroscopy↗

USGS1988

An exploration geochemical technique for the determination of preconcentrated organometallic halides by ICP-AES

An atomic absorption extraction technique which is widely used in geochemical exploration for the determination of Ag, As, Au, Bi, Cd, Cu, Mo, Pb, Sb, and Zn has been modified and adapted to a simultaneous inductively coupled plasma-atomic emission instrument. The experimental and operating parameters are described for the preconcentration of the metals into their organometallic halides and for the determination of these metals. Lower limits of determination are equal to or improved over those for flame atomic absorption (except Au), and ICP results are very similar to the accepted AA values, with precision for the ICP data in excess of that necessary for exploration purposes.

Applied Spectroscopy↗

USGS1991

Flame ionization mass spectrometry--Isotope ratio determinations for potassium

The air/acetylene flame provides a convenient ion source for the determination of potassium isotopic ratios by mass spectrometry. Unlike the argon inductively coupled plasma (ICP), the flame provides low background in the mass region of interest. Ion production is quite satisfactory for isotope ratio measurements at the micrograms per milliliter (μg/mL) level and slightly below, with 1 μg/mL potassium giving about 105counts/second at a nominal mass-to-charge ratio of 39. The detection limit for potassium was 2-3 nanograms per milliliter (ng/mL). The ratio of 41K/39K was measured with 0.5-1% relative standard deviation, and a 41K spike representing 0.2% of the total potassium was readily detected. Both signal levels and signal stability were improved by adding a second easily ionized element such as cesium to samples and standards. Alternatively, a cesium solution could be aspirated for about 1 minute between sample measurements to ensure signal stability.

Applied Spectroscopy↗

USGS1998

A table of polyatomic interferences in ICP-MS

Spectroscopic interferences are probably the largest class of interferences in ICP-MS and are caused by atomic or molecular ions that have the same mass-to-charge as analytes of interest. Current ICP-MS instrumental software corrects for all known atomic “isobaric” interferences, or those caused by overlapping isotopes of different elements, but does not correct for most polyatomic interferences. Such interferences are caused by polyatomic ions that are formed from precursors having numerous sources, such as the sample matrix, reagents used for preparation, plasma gases, and entrained atmospheric gases.

Atomic Spectroscopy↗

USGS1999

A lead isotope distribution study in swine tissue using ICP-MS

In the United States lead is an ubiquitous environmental pollutant that is a serious human health hazard, especially for women of childbearing age, developing fetuses, and young children. Information concerning the uptake and distribution of lead to maternal and fetal tissues during pregnancy is poorly documented. A study was designed using domestic swine and lead isotope enrichment methodology to focus on maternal absorption and distribution of lead into bone and soft tissues, including the fetal compartment, under varying conditions of oral lead exposure and during altered physiological states (pregnant vs unbred). Total lead levels and Pb207/Pb206 ratios in bone (femur and vertebra), blood, and soft tissues (liver, kidney, brain) were determined by ICP-MS. Lead in fetal tissues derived from maternal bone could be differentiated from that derived from exogenous dosing. Unbred swine absorbed much less lead than pregnant females receiving the same dose. The accuracy and precision of ICP-MS at the instrumental level and for the entire method (sample collection, digestion, and analysis) were evaluated for both Pb207/Pb206 ratios and total lead. Several changes were suggested in method design to improve both instrumental and total method precision.

Atomic Spectroscopy↗

USGS1996

Applications of inductively coupled plasma-mass spectrometry in environmental radiochemistry

The state of the art in ICP-MS is now such that there are few discernible differences between radiochemical and mass spectrometric determinations of longlived radionuclides. Indeed, ICP-MS may provide better (more sensitive) data for many radionuclides, depending upon how one wishes to define "long-lived." In lowlevel determinations, sample preparation remains an important part of the analytical procedure, even with ICP-MS, but the speed and isotopic selectivity of the mass spectrometer appear to offer distinct procedural advantages over radiochemical techniques. Therefore, "radioanalytical" ICP-MS applications should continue to grow, especially in the area of radiation protection, but further research (on efficient sample introduction, for example) and method development may be required to get ICP-MS "off the ground" in the geochemical research areas that have traditionally been supported by radiochemistry.

Spectroscopy↗