Geology Reports⌕ Search
Home/Archive/USGS

USGS · 70012825

Statistical evaluation of an inductively coupled plasma atomic emission spectrometric method for routine water quality testing

J.R. Garbarino·B. E. Jones·G.P. Stein
View original source ↗Export metadata ↓

Abstract

In an interlaboratory test, inductively coupled plasma atomic emission spectrometry (ICP-AES) was compared with flame atomic absorption spectrometry and molecular absorption spectrophotometry for the determination of 17 major and trace elements in 100 filtered natural water samples. No unacceptable biases were detected. The analysis precision of ICP-AES was found to be equal to or better than alternative methods. Known-addition recovery experiments demonstrated that the ICP-AES determinations are accurate to between plus or minus 2 and plus or minus 10 percent; four-fifths of the tests yielded average recoveries of 95-105 percent, with an average relative standard deviation of about 5 percent.

Explore related subjects

Applied SpectroscopyArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J.R. Garbarino, B. E. Jones, G.P. Stein. 1985-05-01. Statistical evaluation of an inductively coupled plasma atomic emission spectrometric method for routine water quality testing. https://doi.org/10.1366/0003702854248458

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Stacked machine learning for timber identification with laser-induced breakdown spectroscopy (LIBS)

This study presents a new approach to wood species identification using laser-induced breakdown spectroscopy (LIBS) combined with stacked machine learning techniques. The research analyzed 700 samples comprising nine Dalbergia species and nine additional tropical timber species, utilizing a handheld LIBS analyzer. A stacking methodology was developed by integrating three support vector machine (SVM) models with different kernel functions (linear, polynomial, and radial) in a one-versus-all (OVA) configuration. These SVM outputs were then combined using a partial least squares discriminant analysis (PLS-DA) meta-learner. Through PCA-based variable selection, the dimensionality was reduced from 23 401 to wavelengths while maintaining classification accuracy. The stacking approach achieved a Cohen's kappa value of 0.8671 in the validation set, significantly outperforming traditional flat classifiers. Variable importance analysis revealed calcium, magnesium, and barium as crucial elements for species differentiation, with their concentrations reflecting environmental conditions and geographical origins. This research demonstrates the potential of combining LIBS spectroscopy with advanced machine learning techniques for rapid, non-invasive timber identification, which can support efforts against illegal logging and enforcement of international trade regulations.

Applied Spectroscopy↗
USGS2025

Determination of provenance soil type using inductively coupled plasma mass spectrometry (ICP-MS) analyses of Pinus ponderosa ash

This study demonstrates the feasibility of determining soil provenance from tree ash composition using elemental analysis and chemometric techniques. To date, no published studies have applied chemometric approaches to classify ash for provenance determination following forest fires. In this work, Pinus ponderosa ash was analyzed to distinguish samples based on soil type and geographic location. Pinus ponderosa , a widely distributed pine species in the western United States where wildfires are prevalent, was selected as a model system. Needles were collected from trees grown in five distinct soil types across northern Arizona and Colorado, then dry-ashed under controlled conditions. Classification was performed using three preprocessing techniques and five machine learning algorithms, including hierarchical modeling structures to optimize separation. Partial least squares discriminant analysis (PLS-DA) following a Box-Cox transformation yielded the highest classification accuracy, achieving a prediction kappa value of 0.98 for soil type identification. However, classification performance decreased when distinguishing both soil type and geographic location, indicating that additional variability may influence predictive accuracy in broader applications. These findings highlight the potential of inductively coupled plasma mass spectrometry (ICP-MS) and machine learning for post-wildfire forensic analysis and environmental monitoring.

Applied Spectroscopy↗
USGS2008

Mid-infrared diffuse reflectance spectroscopic examination of charred pine wood, bark, cellulose, and lignin: Implications for the quantitative determination of charcoal in soils

Fires in terrestrial ecosystems produce large amounts of charcoal that persist in the environment and represent a substantial pool of sequestered carbon in soil. The objective of this research was to investigate the effect of charring on mid-infrared spectra of materials likely to be present in forest fires in order to determine the feasibility of determining charred organic matter in soils. Four materials (cellulose, lignin, pine bark, and pine wood) and char from these materials, created by charring for various durations (1 to 168 h) and at various temperatures (200 to 450 °C), were studied. Mid-infrared spectra and measures of acidity (total acids, carboxylic acids, lactones, and phenols as determined by titration) were determined for 56 different samples (not all samples were charred at all temperatures/durations). Results showed spectral changes that varied with the material, temperature, and duration of charring. Despite the wide range of spectral changes seen with the differing materials and length/temperature of charring, partial least squares calibrations for total acids, carboxylic acids, lactones, and phenols were successfully created (coefficient of determination and root mean squared deviation of 0.970 and 0.380; 0.933 and 0.227; 0.976 and 0.120; and 0.982 and 0.101 meq/g, respectively), indicating that there is a sufficient commonality in the changes to develop calibrations without the need for unique calibrations for each specific material or condition of char formation.

Applied Spectroscopy↗