Geology Reports⌕ Search
Home/Archive/USGS

USGS · 70033616

Mid-infrared diffuse reflectance spectroscopic examination of charred pine wood, bark, cellulose, and lignin: Implications for the quantitative determination of charcoal in soils

J. B. Reeves·G.W. McCarty·D.W. Rutherford·R.L. Wershaw
View original source ↗Export metadata ↓

Abstract

Fires in terrestrial ecosystems produce large amounts of charcoal that persist in the environment and represent a substantial pool of sequestered carbon in soil. The objective of this research was to investigate the effect of charring on mid-infrared spectra of materials likely to be present in forest fires in order to determine the feasibility of determining charred organic matter in soils. Four materials (cellulose, lignin, pine bark, and pine wood) and char from these materials, created by charring for various durations (1 to 168 h) and at various temperatures (200 to 450 °C), were studied. Mid-infrared spectra and measures of acidity (total acids, carboxylic acids, lactones, and phenols as determined by titration) were determined for 56 different samples (not all samples were charred at all temperatures/durations). Results showed spectral changes that varied with the material, temperature, and duration of charring. Despite the wide range of spectral changes seen with the differing materials and length/temperature of charring, partial least squares calibrations for total acids, carboxylic acids, lactones, and phenols were successfully created (coefficient of determination and root mean squared deviation of 0.970 and 0.380; 0.933 and 0.227; 0.976 and 0.120; and 0.982 and 0.101 meq/g, respectively), indicating that there is a sufficient commonality in the changes to develop calibrations without the need for unique calibrations for each specific material or condition of char formation.

Explore related subjects

Applied SpectroscopyArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J. B. Reeves, G.W. McCarty, D.W. Rutherford, R.L. Wershaw. 2008-02-01. Mid-infrared diffuse reflectance spectroscopic examination of charred pine wood, bark, cellulose, and lignin: Implications for the quantitative determination of charcoal in soils. https://doi.org/10.1366/000370208783575618

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Stacked machine learning for timber identification with laser-induced breakdown spectroscopy (LIBS)

This study presents a new approach to wood species identification using laser-induced breakdown spectroscopy (LIBS) combined with stacked machine learning techniques. The research analyzed 700 samples comprising nine Dalbergia species and nine additional tropical timber species, utilizing a handheld LIBS analyzer. A stacking methodology was developed by integrating three support vector machine (SVM) models with different kernel functions (linear, polynomial, and radial) in a one-versus-all (OVA) configuration. These SVM outputs were then combined using a partial least squares discriminant analysis (PLS-DA) meta-learner. Through PCA-based variable selection, the dimensionality was reduced from 23 401 to wavelengths while maintaining classification accuracy. The stacking approach achieved a Cohen's kappa value of 0.8671 in the validation set, significantly outperforming traditional flat classifiers. Variable importance analysis revealed calcium, magnesium, and barium as crucial elements for species differentiation, with their concentrations reflecting environmental conditions and geographical origins. This research demonstrates the potential of combining LIBS spectroscopy with advanced machine learning techniques for rapid, non-invasive timber identification, which can support efforts against illegal logging and enforcement of international trade regulations.

Applied Spectroscopy↗
USGS2025

Determination of provenance soil type using inductively coupled plasma mass spectrometry (ICP-MS) analyses of Pinus ponderosa ash

This study demonstrates the feasibility of determining soil provenance from tree ash composition using elemental analysis and chemometric techniques. To date, no published studies have applied chemometric approaches to classify ash for provenance determination following forest fires. In this work, Pinus ponderosa ash was analyzed to distinguish samples based on soil type and geographic location. Pinus ponderosa , a widely distributed pine species in the western United States where wildfires are prevalent, was selected as a model system. Needles were collected from trees grown in five distinct soil types across northern Arizona and Colorado, then dry-ashed under controlled conditions. Classification was performed using three preprocessing techniques and five machine learning algorithms, including hierarchical modeling structures to optimize separation. Partial least squares discriminant analysis (PLS-DA) following a Box-Cox transformation yielded the highest classification accuracy, achieving a prediction kappa value of 0.98 for soil type identification. However, classification performance decreased when distinguishing both soil type and geographic location, indicating that additional variability may influence predictive accuracy in broader applications. These findings highlight the potential of inductively coupled plasma mass spectrometry (ICP-MS) and machine learning for post-wildfire forensic analysis and environmental monitoring.

Applied Spectroscopy↗
USGS2006

In situ study of mass transfer in aqueous solutions under high pressures via Raman spectroscopy: A new method for the determination of diffusion coefficients of methane in water near hydrate formation conditions

A new method was developed for in situ study of the diffusive transfer of methane in aqueous solution under high pressures near hydrate formation conditions within an optical capillary cell. Time-dependent Raman spectra of the solution at several different spots along the one-dimensional diffusion path were collected and thus the varying composition profile of the solution was monitored. Diffusion coefficients were estimated by the least squares method based on the variations in methane concentration data in space and time in the cell. The measured diffusion coefficients of methane in water at the liquid (L)-vapor (V) stable region and L-V metastable region are close to previously reported values determined at lower pressure and similar temperature. This in situ monitoring method was demonstrated to be suitable for the study of mass transfer in aqueous solution under high pressure and at various temperature conditions and will be applied to the study of nucleation and dissolution kinetics of methane hydrate in a hydrate-water system where the interaction of methane and water would be more complicated than that presented here for the L-V metastable condition. ?? 2006 Society for Applied Spectroscopy.

Applied Spectroscopy↗