SEARCH · Geology Reports

Results for “Watershed Events”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

591 records · Page 33Linked to original sources

USGS2006

Environmental Setting of the Morgan Creek Basin, Maryland, 2002-04

The Morgan Creek Basin is a 31-square-kilometer watershed in Kent County, Maryland on the Delmarva Peninsula. The Delmarva Peninsula covers about 15,500 square kilometers and includes most of the State of Delaware and parts of Maryland and Virginia east of the Chesapeake Bay. The Morgan Creek Basin is one of five sites selected for the study of sources, transport, and fate by the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) Program's: Agricultural Chemicals: Sources, Transport and Fate study team (Agricultural Chemicals Team, ACT). A key component of the study is identifying the natural factors and human influences affecting water quality in the Morgan Creek Basin. The Morgan Creek Basin is in the Coastal Plain Physiographic Province, which is a nearly level seaward-sloping lowland with areas of moderate topographic relief. The study area lies within a well-drained upland region with permeable and porous soils and aquifer sediments. The soils are well suited to most field crops. Agriculture is the principal land use in the Morgan Creek Basin, as well as throughout the entire Delmarva Peninsula. Most agricultural land is used for row crops such as corn, soybeans, and small grains, and slightly less land is used for pasture and hay production involving alfalfa, clover, and various perennial grasses. There are several animal operations in the study area. Farm management practices include fertilizer and herbicide applications, different tillage practices, addition of lime, forested riparian buffers, grassed waterways, and sediment retention ponds. Irrigation in the study area is minimal. The climate of the Morgan Creek Basin is humid and subtropical, with an average annual precipitation of 1.12 meters. Overall annual precipitation is evenly distributed throughout the year, from 76 to 101 millimeters per month; however, the spring and summer (March - September) tend to be slightly wetter than the autumn and winter (October - February). Anomalously high precipitation can occur in summer/early autumn due to occasional hurricanes and tropical storms. Thunderstorms can also produce relatively high localized precipitation over the Morgan Creek Basin during the summer months. Mean daily streamflows for Morgan Creek are highly variable, and somewhat flashy due to the relatively small area of the basin. The long-term median base flow for Morgan Creek is 59 percent of total flow, indicating that total streamflow is most often dominated by a sustained ground-water contribution. Surface runoff accounts for the other 41 percent of the water in total streamflow and dominates during and just after precipitation events. The surficial aquifer in the study area consists of permeable quartz-rich sand and gravel and is underlain by less permeable marine sand, silt, and clay. The depth to water table ranges from less than 0.4 meters below land surface in the floodplain to 12 meters below land surface in upland areas. Ground water generally flows from uplands toward the Morgan Creek floodplain at a variety of depths and time scales. Because the soils and sediments are permeable and porous, some fraction of chemicals applied to the land surface tend to move downward to the water table where they are transported to discharge areas near Morgan Creek.

Open-File Report↗

USGS2005

Occurrence of fecal-indicator bacteria and protocols for identification of fecal-contamination sources in selected reaches of the West Branch Brandywine Creek, Chester County, Pennsylvania

The presence of fecal-indicator bacteria indicates the potential presence of pathogens originating from the fecal matter of warm-blooded animals. These pathogens are responsible for numerous human diseases ranging from common diarrhea to meningitis and polio. The detection of fecal-indicator bacteria and interpretation of the resultant data are, therefore, of great importance to water-resource managers. Current (2005) techniques used to assess fecal contamination within the fluvial environment primarily assess samples collected from the water column, either as grab samples or as depth- and (or) width-integrated samples. However, current research indicates approximately 99 percent of all bacteria within nature exist as attached, or sessile, bacteria. Because of this condition, most current techniques for the detection of fecal contamination, which utilize bacteria, assess only about 1 percent of the total bacteria within the fluvial system and are, therefore, problematic. Evaluation of the environmental factors affecting the occurrence and distribution of bacteria within the fluvial system, as well as the evaluation and modification of alternative approaches that effectively quantify the larger population of sessile bacteria within fluvial sediments, will present water-resource managers with more effective tools to assess, prevent, and (or) eliminate sources of fecal contamination within pristine and impaired watersheds. Two stream reaches on the West Branch Brandywine Creek in the Coatesville, Pa., region were studied between September 2002 and August 2003. The effects of sediment particle size, climatic conditions, aquatic growth, environmental chemistry, impervious surfaces, sediment and soil filtration, and dams on observed bacteria concentrations were evaluated. Alternative approaches were assessed to better detect geographic sources of fecal contamination including the use of turbidity as a surrogate for bacteria, the modification and implementation of sandbag bacteria samplers, and the use of optical brighteners. For the purposes of this report, sources of bacteria were defined as geographic locations where elevated concentrations of bacteria are observed within, or expected to enter, the main branch of the West Branch Brandywine Creek. Biologic sources (for example, waterfowl) were noted where applicable; however, no specific study of biologic sources (such as bacterial source tracking) was conducted. Data indicated that specific bacterial populations within fluvial sediments could be related to specific particle-size ranges. This relation is likely the result of the reduced porosity and permeability associated with finer sediments and the ability of specific bacteria to tolerate particular environments. Escherichia coli (E. coli) showed a higher median concentration (2,160 colonies per gram of saturated sediment) in the 0.125 to 0.5-millimeter size range of natural sediments than in other ranges, and enterococcus bacteria showed a higher median concentration (61,830 colonies per gram of saturated sediment) in the 0.062 to 0.25-millimeter size range of natural sediments than in other ranges. There were insufficient data to assess the particle-size relation to fecal coliform bacteria and (or) fecal streptococcus bacteria. Climatic conditions were shown to affect bacteria concentrations in both the water column and fluvial sediments. Drought conditions in 2002 resulted in lower overall bacteria concentrations than the more typically wet year of 2003. E. coli concentrations in fluvial sediment along the Coatesville study reach in 2002 had a median concentration of 92 colonies per gram of saturated sediment; in 2003, the median concentration had risen to 4,752 colonies per gram of saturated sediment. Symbiotic relations between bacteria and aquatic growth were likely responsible for increased bacteria concentrations observed within an impoundment area on the Coatesville study reach. This reach showed evidence of elevated aquatic growth and sharp increases in E. coli concentrations from upstream to downstream through the impoundment area in both 2002 and 2003. In 2003, E. coli concentrations within the waters column increased from 940 colonies per 100 milliliters upstream to 6,000 colonies per 100 milliliters at the dam crest. Given that these bacteria likely resulted from natural bacterial regrowth, the use of E. coli as an indicator of fecal contamination was severely impaired. Variable environmental conditions along the West Branch Brandywine Creek made the common field-chemical parameters of specific conductance, temperature, pH, and dissolved oxygen ineffective and (or) impossible to use for the determination of inputs of fecal contamination. Extreme variations in chemical gradients commonly were related to the urban/industrial signature of the watershed. For example, during base-flow sampling in 2002, specific-conductance values exceeding 1,000 microsiemens per centimeter observed in effluent from a local steel mill. This effluent raised the specific conductance within the West Branch Brandywine from just above 200 microsiemens per centimeter upstream from the outfall to just below 500 microsiemens per centimeter downstream from the outfall. These chemical gradients also, likely, had an effect on the initial colonization of bacteria, the formation of biofilms, and the persistence of certain types of bacteria along the study reach. Data collected in 2003 indicated that nutrients increased during both base-flow and stormflow conditions along the Coatesville study reach. For example, during base-flow sampling in 2003, 20 pounds of phosphorus was shown to enter the West Branch Brandywine Creek along the Coatesville study reach. The largest contributors to this base-flow nutrient load were likely two wastewater-treatment facilities adjacent to the study reach. During stormflow sampling in 2003, 480 pounds of phosphorus was shown to enter the West Branch Brandywine Creek along the Coatesville study reach. Data, along with other research, indicated the largest contributor to this stormflow nutrient load was likely remobilized sediment originating from a large dam impoundment. These elevated nutrient concentrations were considered sufficient to promote accelerated aquatic growth along the reach. Data collected in 2003 showed that wastewater constituents entered the West Branch Brandywine Creek largely from urban storm-sewer systems. Samples from the primary storm sewer for the city of Coatesville had detections for 20 of 69 wastewater constituents. These constituents included both strong and weak indicators of fecal contamination and generally indicated the storm-sewer system along the Coatesville study reach was a likely source of fecal-indicator bacteria and fecal contamination under base-flow conditions. By comparison, 5 constituents were detected in samples from the upstream end of the reach, and 10 constituents were detected in samples from the downstream end of the reach. During stormflow, numbers of detections were similar along the entire length of the study reach-five in samples from the upstream end, eight in samples from the center of the reach, and seven in samples from the downstream end of the reach. These data indicate that point sources (such as culverts and pipes, septic systems, and wastewater-treatment facilities) are not likely the origin of bacteria contamination during stormflow. The bacteria concentrations observed during stormflow events probably result from remobilized sessile bacteria stored within fluvial sediments. In this case, these bacteria should not be considered indicators of current fecal contamination. Impervious surfaces were found to increase bacteria concentrations along the West Branch Brandywine Creek because contaminated runoff from impervious areas generally flows into, and is concentrated within, the confines of the local storm-sewer system. During 2002, storm-sewer outfalls draining impervious areas were associated with all major locations of elevated bacterial concentrations (greater than 1,200 colonies per gram of saturated sediment) in fluvial sediments. During 2003, wetter conditions and overall bacteria concentrations higher than in 2002 resulted in point sources of bacterial contamination becoming less pronounced; however, the storm-sewer system, draining adjacent impervious areas, was still observed to be the primary source of bacteria along the reach. Where stormwater and (or) other runoff from these areas was allowed to infiltrate and (or) flow through wetland and riparian buffers, bacteria concentrations were not observed to be elevated above background levels commonly observed throughout similar areas of the same reach. Two run-of-the-river dams along the Coatesville study reach were evaluated for their effects on observed bacterial concentrations. These dams were shown to have greater or lesser effects on bacterial concentrations depending on the size of the structure and the capacity of the structure to impede flows. The smaller upstream dam had an approximate height of 3 feet and showed little observed effect on measured turbidity values; these data indicated that the dam did not effectively impede the flow of water or sediment within the West Branch Brandywine Creek. Consequently, this small dam did not show any observed effect on bacterial concentrations either upstream or downstream of the structure. The larger dam, near the middle of the reach, had an approximate height of 20 feet and showed greater effects on both turbidity and bacteria concentrations. The capacity of the larger dam to impede flows, combined with nutrients entering the reach, resulted in increased biologic activity throughout the impoundment area. Within this larger impoundment, enterococcus bacteria populations were observed to decrease sharply and E. coli bacteria populations were observed to increase sharply as flow approached the dam crest. All bacteria levels were then observed to drop to background levels, in both the water column and fluvial sediment, immediately downstream from the dam crest. Additional study is required to determine the cause for this rapid die off. Turbidity was assessed as a potential surrogate for E. coli bacteria. Regression analysis indicated higher turbidity levels usually can indicate higher concentrations of bacteria (R2 = 0.67), but the relation was too sporadic on the West Branch Brandywine Creek to use turbidity as a surrogate for estimated bacteria concentrations. Evaluation of data from individual base-flow and stormflow events resulted in variable and generally poor statistical relations between E. coli bacteria and turbidity (R2 values ranged from 0.02 to 0.94). Sandbag samplers were used in 2003 to determine their suitability for the assessment of fecal contamination. Sandbag samplers rely on the ability of bacteria to attach to surfaces and use the larger sessile bacteria populations instead of the more commonly used planktonic bacteria populations. E. coli bacteria concentrations observed in the sandbag samplers, after 1 week in place, were similar to those found within natural sediments collected concurrently. Enterococcus bacteria concentrations within the same sandbag samplers were not similar, and were generally lower, than those observed within the natural sediments. This discrepancy was likely because sand within the samplers was sieved to a size that was likely too coarse for enterococcus bacteria to persist. Optical-brightener samplers were installed along with each sandbag sampler. Optical brighteners are additives used in common household detergents; therefore, detection of optical brighteners, along with elevated fecal-indicator bacteria concentrations, strongly indicates a link to humans. Positive results for optical brighteners were detected only at the outfalls of two sewage-treatment facilities; because of treatment of the effluent from these facilities, these samples did not have elevated bacteria concentrations. The lack of additional positive results was largely because this method is not sensitive to low concentrations of optical brighteners.

Pennsylvania↗

USGS2012

Preliminary assessment of channel stability and bed-material transport in the Tillamook Bay tributaries and Nehalem River basin, northwestern Oregon

This report summarizes a preliminary study of bed-material transport, vertical and lateral channel changes, and existing datasets for the Tillamook (drainage area 156 square kilometers [km 2 ]), Trask (451 km 2 ), Wilson (500 km 2 ), Kilchis (169 km 2 ), Miami (94 km 2 ), and Nehalem (2,207 km 2 ) Rivers along the northwestern Oregon coast. This study, conducted in coopera-tion with the U.S. Army Corps of Engineers and Oregon Department of State Lands to inform permitting decisions regarding instream gravel mining, revealed that: Study areas along the six rivers can be divided into reaches based on tidal influence and topography. The fluvial (nontidal or dominated by riverine processes) reaches vary in length (2.4-9.3 kilometer [km]), gradient (0.0011-0.0075 meter of elevation change per meter of channel length [m/m]), and bed-material composition (a mixture of alluvium and intermittent bedrock outcrops to predominately alluvium). In fluvial reaches, unit bar area (square meter of bar area per meter of channel length [m 2 /m]) as mapped from 2009 photographs ranged from 7.1 m 2 /m on the Tillamook River to 27.9 m 2 /m on the Miami River. In tidal reaches, all six rivers flow over alluvial deposits, but have varying gradients (0.0001-0.0013 m/m) and lengths affected by tide (1.3-24.6 km). The Miami River has the steepest and shortest tidal reach and the Nehalem River has the flattest and longest tidal reach. Bars in the tidal reaches are generally composed of sand and mud. Unit bar area was greatest in the Tidal Nehalem Reach, where extensive mud flats flank the lower channel. Background factors such as valley and channel confinement, basin geology, channel slope, and tidal extent control the spatial variation in the accumulation and texture of bed material. Presently, the Upper Fluvial Wilson and Miami Reaches and Fluvial Nehalem Reach have the greatest abundance of gravel bars, likely owing to local bed-material sources in combination with decreasing channel gradient and valley confinement. Natural and human-caused disturbances such as mass movements, logging, fire, channel modifications for navigation and flood control, and gravel mining also have varying effects on channel condition, bed-material transport, and distribution and area of bars throughout the study areas and over time. Existing datasets include at least 16 and 18 sets of aerial and orthophotographs that were taken of the study areas in the Tillamook Bay tributary basins and Nehalem River basin, respectively, from 1939 to 2011. These photographs are available for future assessments of long-term changes in channel condition, bar area, and vegetation establishment patterns. High resolution Light Detection And Ranging (LiDAR) surveys acquired in 2007-2009 could support future quantitative analyses of channel morphology and bed-material transport in all study areas. A review of deposited and mined gravel volumes reported for instream gravel mining sites shows that bed-material deposition tends to rebuild mined bar surfaces in most years. Mean annual deposition volumes on individual bars exceeded 3,000 cubic meters (m 3 ) on Donaldson Bar on the Wilson River, Dill Bar on the Kilchis River, and Plant and Winslow Bars on the Nehalem River. Cumulative reported volumes of bed-material deposition were greatest at Donaldson and Dill Bars, totaling over 25,000 m 3 per site from 2004 to 2011. Within this period, reported cumulative mined volumes were greatest for the Donaldson, Plant, and Winslow Bars, ranging from 24,470 to 33,940 m 3 . Analysis of historical stage-streamflow data collected by the U.S. Geological Survey on the Wilson River near Tillamook (14301500) and Nehalem River near Foss (14301000) shows that these rivers have episodically aggraded and incised, mostly following high flow events, but they do not exhibit systematic, long-term trends in bed elevation. Multiple cross sections show that channels near bridge crossings in all six study areas are dynamic with many subject to incision and aggradation as well as lateral shifts in thalweg position and bank deposition and erosion. In fluvial reaches, unit bar area declined a net 5.3-83.6 percent from 1939 to 2009. The documented reduction in bar area may be attributable to several factors, including vegetation establishment and stabilization of formerly active bar surfaces, lateral channel changes and resulting alterations in sediment deposition and erosion patterns, and streamflow and/or tide differences between photographs. Other factors that may be associated with the observed reduction in bar area but not assessed in this reconnaissance level study include changes in the sediment and hydrology regimes of these rivers over the analysis period. In tidal reaches, unit bar area increased on the Tillamook and Nehalem Rivers (98.0 and 14.7 percent, respectively), but declined a net 24.2 to 83.1 percent in the other four tidal reaches. Net increases in bar area in the Tidal Tillamook and Nehalem Reaches were possibly attributable to tidal differences between the photographs as well as sediment deposition behind log booms and pile structures on the Tillamook River between 1939 and 1967. The armoring ratio (ratio of the median grain sizes of a bar's surface and subsurface layers) was 1.6 at Lower Waldron Bar on the Miami River, tentatively indicating a relative balance between transport capacity and sediment supply at this location. Armoring ratios, however, ranged from 2.4 to 5.5 at sites on the Trask, Wilson, Kilchis, and Nehalem Rivers; these coarse armor layers probably reflect limited bed-material supply at these sites. On the basis of mapping results, measured armoring ratios, and channel cross section surveys, preliminary conclusions are that the fluvial reaches on the Tillamook, Trask, Kilchis, and Nehalem Rivers are currently sediment supply-limited in terms of bed material - that is, the transport capacity of the channel generally exceeds the supply of bed material. The relation between transport capacity and sediment is more ambiguous for the fluvial reaches on the Wilson and Miami Rivers, but transport-limited conditions are likely for at least parts of these reaches. Some of these reaches have possibly evolved from sediment supply-limited to transport-limited over the last several decades in response to changing basin and climate conditions. Because of exceedingly low gradients, all the tidal reaches are transport-limited. Bed material in these reaches, however, is primarily sand and finer grain-size material and probably transported as suspended load from upstream reaches. These reaches will be most susceptible to watershed conditions affecting the supply and transport of fine sediment. Compared to basins on the southwestern Oregon coast, such as the Chetco and Rogue River basins, these six basins likely transport overall less gravel bed material. Although tentative in the absence of actual transport measurements, this conclusion is supported by the much lower area and frequency of bars and longer tidal reaches along all the northcoast rivers examined in this study. Previous studies suggest that the expansive and largely unvegetated bars visible in the 1939 photographs are primarily associated with voluminous sedimentation starting soon after the first Tillamook Burn fire in 1933. However, USGS studies of temporal bar trends in other Oregon coastal rivers unaffected by the Tillamook Burn show similar declines in bar area over approximately the same analysis period. In the Umpqua and Chetco River basins, historical declines in bar area are associated with long-term decreases in flood magnitude. Other factors may include changes in the type and volume of large wood and riparian vegetation. Further characterization of hydrology patterns in these basins and possible linkages with climate factors related to flood peaks, such as the Pacific Decadal Oscillation, could support inferences of expected future changes in vegetation establishment and channel planform and profile. More detailed investigations of bed-material transport rates and channel morphology would support assessments of lateral and vertical channel condition and longitudinal trends in bed material. Such assessments would be most practical for the fluvial study areas on the Wilson, Kilchis, Miami, and Nehalem Rivers and relevant to several ongoing management and ecological issues pertaining to sand and gravel transport. Tidal reaches may also be logical subjects for indepth analysis where studies would be more relevant to the deposition and transport of fine sediment (and associated channel and riparian conditions and processes) rather than coarse bed material.

Oregon↗

USGS2025

Drought in the Delta: Socio-ecological impacts, responses, and tools

Droughts are frequent events in the western United States, and can disrupt water supply and degrade water quality, challenging water management in the Sacramento–San Joaquin Delta (Delta). This chapter for the State of Bay–Delta Science report describes what drought means for the Delta, how drought is managed in the Delta, and how drought management has changed over time. Projections of future climate indicate the possibility of increased frequency and severity of droughts which would have increasing effects on California’s water system, society, and ecological functions within and beyond the Delta. California has experienced several major droughts in the 20th and 21st centuries, each of which has caused significant social and ecological impacts and motivated improvements in water management. Droughts decrease native fish populations, increase harmful algal blooms, and promote the spread of many invasive plant and animal species. For people living within the Delta and those that rely on Delta water exports, droughts increase drinking water costs and decrease agricultural production, negatively affecting agricultural economies and labor markets. Tools developed in response to droughts include actions that increase supply, such as building water infrastructure, actions to reduce demand, such as water conservation campaigns, and mitigation actions, such as monetary relief for drought-impacted communities. Improving drought resilience requires development of additional drought responses, increased forecasting accuracy, and increased awareness of impacts on vulnerable communities and ecosystems. Even with development of additional management actions, strategies, and regulations, there will likely be difficulties meeting the current levels of demand for water. Drought conditions already cause conflict between human and environmental uses, and with more extreme droughts possible in the future and projected increases in demand, it will be challenging to provide for all users’ needs even with major changes to water management in the Delta.

California↗

USGS2020

Rio Grande transboundary integrated hydrologic model and water-availability analysis, New Mexico and Texas, United States, and northern Chihuahua, Mexico

Changes in population, agricultural development and practices (including shifts to more water-intensive crops), and climate variability are increasing demands on available water resources, particularly groundwater, in one of the most productive agricultural regions in the Southwest—the Rincon and Mesilla Valley parts of Rio Grande Valley, Doña Ana and Sierra Counties, New Mexico, and El Paso County, Texas. The goal of this study was to produce an integrated hydrological simulation model to help evaluate water-management strategies, including conjunctive use of surface water and groundwater for historical conditions, and to support long-term planning for the Rio Grande Project. This report describes model construction and applications by the U.S. Geological Survey, working in cooperation and collaboration with the Bureau of Reclamation. This model, the Rio Grande Transboundary Integrated Hydrologic Model, simulates the most important natural and human components of the hydrologic system, including selected components related to variations in climate, thereby providing a reliable assessment of surface-water and groundwater conditions and processes that can inform water users and help improve planning for future conditions and sustained operations of the Rio Grande Project (RGP) by the Bureau of Reclamation. Model development included a revision of the conceptual model of the flow system, construction of a Transboundary Rio Grande Watershed Model (TRGWM) water-balance model using the Basin Characterization Model, and construction of an integrated hydrologic flow model with MODFLOW-One-Water Hydrologic Flow Model version 2 (referred to as MF-OWHM2). The hydrologic models were developed for and calibrated to historical conditions of water and land use, and parameters were adjusted so that simulated values closely matched available measurements (calibration). The calibrated model was then used to assess the use and movement of water in the Rincon Valley, Mesilla Basin, and northern part of the Conejos-Médanos Basin, with the entire region referred to as the “Transboundary Rio Grande” or TRG. These tools provide a means to understand hydrologic system response to the evolution of water use in the region, its availability, and potential operational constraints of the RGP. The conceptual model identified surface-water and groundwater inflows and outflows that included the movement and use of water both in natural and in anthropogenic systems. The groundwater-flow system is characterized by a layered geologic sedimentary sequence combined with the effects of groundwater pumping, operation of the RGP, natural runoff and recharge, and the application of irrigation water at the land surface that is captured and reused in an extensive network of canals and drains as part of the conjunctive use of water in the region. Historical groundwater-level fluctuations followed a cyclic pattern that were aligned with climate cycles, which collectively resulted in alternating periods of wet or dry years. Periods of drought that persisted for one or more years are associated with low surface-water availability that resulted in higher rates of groundwater-level decline. Rates of groundwater-level decline also increased during periods of agricultural intensification, which necessitated increasing use of groundwater as a source of irrigation water. Agriculture in the area was initially dominated by alfalfa and cotton, but since 1970 more water-intensive pecan orchards and vegetable production have become more common. Groundwater levels substantially declined in subregions where drier climate combined with increased demand, resulting in periods of reduced streamflows. Most of the groundwater was recharged in the Rio Grande Valley floor, and most of the pumpage and aquifer storage depletion was in Mesilla Basin agricultural subregions. A cyclic imbalance between inflows and outflows resulted in the modeled cyclic depletion (groundwater withdrawals in excess of natural recharge) of the groundwater basin during the 75-year simulation period of 1940–2014. Changes in groundwater storage can vary considerably from year to year, depending on land use, pumpage, and climate conditions. Climatic drivers of wet and dry years can greatly affect all inflows, outflows, and water use. Although streamflow and, to a minor extent, precipitation during inter-decadal wet-year periods replenished the groundwater historically, contemporary water use and storage depletion could have reduced the effects of these major recharge events. The average net groundwater flow-rate deficit for 1953–2014 was estimated to be about 1,090 acre-feet per year.

Chihuahua, New Mexico, Texas↗

USGS2018

Nearshore sediment monitoring for the Stormwater Action Monitoring (SAM) Program, Puget Sound, western Washington

Chemicals such as metals and organics (polychlorinated biphenyl [PCBs], polybrominated diphenyl ethers [PBDEs], polycyclic aromatic hydrocarbons [PAHs], and phthalates) continue to enter Puget Sound, western Washington, from point sources (such as industrial and municipal outfalls) and combined sewer outfalls and non-point sources (such as stormwater runoff). Runoff during storm events has been identified as a major source of contamination entering Puget Sound and has been implicated in the degradation of nearshore habitats and biota. Metals, organic chemicals, and other pollutants are known to accumulate in sediments such as those present along the shoreline of Puget Sound. In addition to chemical contaminants, small plastic particles (known as microplastics), found in marine waters of Puget Sound and suspected of being in aquatic sediments, are a potential concern because they can be ingested by animals and are suspected of transporting sorbed chemicals such as PCBs and metals. The Stormwater Work Group of Puget Sound (SWG) (composed of State and municipal stormwater permittees, and other stakeholders) developed a strategy to address sediment conditions in the nearshore environment of Puget Sound. As part of this strategy, the SWG developed a regional stormwater monitoring strategy designed to inform monitoring requirements in National Pollutant Discharge Elimination System (NPDES) stormwater permits issued by the Washington State Department of Ecology (Ecology). The monitoring program is referred to as the Stormwater Action Monitoring (SAM). The overall focus of the work described in this report is to address one of the goals of SAM, which is to characterize the status, spatial extent, and quality of Puget Sound sediment chemicals in the nearshore urban areas. The nearshore urban areas are defined as areas parallel to established Urban Growth Areas (UGAs) using a spatially balanced probabilistic Generalized Random Tessellation Stratified (GRTS) sampling design. One of the benefits of the GRTS sampling design used for this study is that it allows one to efficiently extrapolate from a relatively small number of sampled nearshore sites to the entire nearshore shoreline within the 2011 defined UGA boundaries of Puget Sound. In addition to characterizing nearshore sediment chemical concentrations, this study also characterized the abundance of microplastics in the nearshore sediment. A total of 41 randomly selected sites were sampled throughout Puget Sound in summer and early autumn of 2016. All sampling sites were located at 6 feet below the Mean Lower Low Water line. The top 2–3 centimeters of sediment were collected using a boat-mounted, pre-cleaned stainless-steel box corer. All chemical samples were sieved to 2 millimeters and placed in appropriate containers for chemical analysis for PCBs, PBDEs, PAHs, phthalates, metals, total organic carbon, and grain size. Pre-sieved sediment samples were stored in glass containers for microplastic analysis. Nearshore sediment chemical concentrations were summarized using numerous statistical approaches to examine the minimum, mean, and maximum concentrations for each of the compounds analyzed and to compare the results to criteria and other nearshore and marine sediment studies. The GRTS sampling design also allowed the authors to assess the percentage of the UGA nearshore environment that did not meet established standards or criteria for each chemical analyzed. Additionally, regression and machine learning statistical analyses were used to examine relations between measured chemical concentrations, and land cover and geologic features at multiple scales within the watersheds adjacent to sampling sites. The influence of marine hydrodynamic factors on nearshore sediment chemical concentrations was statistically evaluated with nonparametric methods by assigning each sampling site to one of five nearshore drift cell types based on its location. The Puget Sound shoreline can be divided into segments, referred to as drift cells, based on the movement of sediment along the shore by waves. Each drift cell type has a unique influence on nearshore sediment transport. The nearshore sediment chemical concentrations for organics and metals generally were low, and in most cases less than Washington State criteria. The concentrations of some PAHs were greater than the criteria, but these exceedances were limited to one or two sites. The results of the probabilistic study design determined that, for the PAHs examined, 96 percent or more of the 1,344 km of shoreline represented by this study had concentrations less than any established criteria. For the remaining organics (PCBs and PBDEs), the probabilistic study design indicates that more than 98 percent of shoreline examined had concentrations less than criteria or proposed standards. For the metals, the results of the study indicate that 100 percent of the nearshore sediment had concentrations less than the criteria. The relations between sediment organic and metal concentrations, and adjacent watershed land cover and the particle size of the samples, were determined to be weakly related. Although weakly related, the particle size of the sediment in a sample typically explained more of the variation in metal concentrations than organics. While the measured watershed attributes adjacent to the sampling sites and sediment size of the samples were weakly related to chemical concentrations, they were significantly related to unique drift cells along the shoreline of Puget Sound known as drift cells. Each drift cell represents a long-term directional transport of sediment from its source to its depositional zone. Sediment chemical concentrations were significantly higher in drift cells with limited sediment movement compared to those with higher sediment transport energy. Microplastics in the nearshore sediment ranged from 0.02 to 0.65 pieces per gram of sediment, with a mean of 0.19 pieces per gram of sediment, and were dominated by small fibers (355–1,000 micrometers). Like chemical concentrations, microplastics concentrations in the nearshore sediment were poorly related to watershed land cover. Although not significantly different, microplastics concentrations generally were higher in the low energy drift cells compared to the high energy drift cells. The results of this study provide a statistically valid status assessment of current nearshore sediment chemical conditions throughout Puget Sound in those areas adjacent to defined UGAs. In addition to the study findings of relatively low concentrations of PCBs, PBDEs, PAHs, phthalates, and metals, the study design provides a statistically valid tool for evaluating changes in these compounds over time if future nearshore sediment assessments are done. Furthermore, the assessment of microplastic abundance represents the first study of its kind that can be used as a benchmark for future evaluations. The results of this study will help inform Ecology in the implementation of monitoring requirements as part of its NPDES stormwater permitting process.

Washington↗

USGS1996

Level II scour analysis for Bridge 12 (BRAITH00230012) on Town Highway 23, crossing Ayers Brook, Braintree, Vermont

This report provides the results of a detailed Level II analysis of scour potential at structure BRAITH00230012 on town highway 23 crossing Ayers Brook, Braintree, Vermont (figures 1–8). A Level II study is a basic engineering analysis of the site, including a quantitative analysis of stream stability and scour (U.S. Department of Transportation, 1993). A Level I study is included in Appendix E of this report. A Level I study provides a qualitative geomorphic characterization of the study site. Information on the bridge available from VTAOT files was compiled prior to conducting Level I and Level II analyses and can be found in Appendix D. The site is in the Green Mountain physiographic province of central Vermont in the town of Braintree. The 18.8-mi 2 drainage area is in a predominantly rural watershed. In the vicinity of the study site, the surface cover of the left and right banks is pasture. In the study area, Ayers Brook has a meandering channel with a slope of approximately 0.003 ft/ft, an average channel top width of 46 ft and an average channel depth of 5 ft. The predominant channel bed material is sand and gravel (D 50 is 6.15 mm or 0.0202 ft). The geomorphic assessment at the time of the Level I and Level II site visit on November 16, 1994, indicated that the reach was laterally unstable. Also at the time of the site visit, there was considerable backwater at the bridge site due to a beaver dam downstream. The beaver dam was ignored in the analyses. The town highway 23 crossing of Ayers Brook is a 28-ft-long, one-lane bridge consisting of one 23-foot span (Vermont Agency of Transportation, written communication, August 24, 1994). The bridge is supported by vertical timber cribwork abutments with wingwalls on the upstream and downstream sides of the right abutment. The lower half of the right abutment and wingwalls are constructed of laid-up stone. The right abutment and wingwalls are also protected by stone fill. The channel is skewed approximately 45 degrees to the opening while the opening-skew-to-roadway is only 5 degrees. Additional details describing conditions at the site are included in the Level II Summary and Appendices D and E. Scour depths and rock rip-rap sizes were computed using the general guidelines described in Hydraulic Engineering Circular 18 (Richardson and others, 1993). Total scour at a highway crossing is comprised of three components: 1) long-term streambed degradation; 2) contraction scour (due to accelerated flow caused by a reduction in flow area at a bridge) and; 3) local scour (caused by accelerated flow around piers and abutments). Total scour is the sum of the three components. Equations are available to compute depths for contraction and local scour and a summary of the results of these computations follows. Contraction scour for all modelled flows ranged from 4.2 to 9.4 ft. The worst-case contraction scour occurred at the incipient-overtopping discharge which was less than the 100-year discharge. Abutment scour ranged from 4.3 to 17.5 ft. The worst-case abutment scour occurred at the 500-year discharge. Additional information on scour depths and depths to armoring are included in the section titled “Scour Results”. Scoured-streambed elevations, based on the calculated scour depths, are presented in tables 1 and 2. A cross-section of the scour computed at the bridge is presented in figure 8. Scour depths were calculated assuming an infinite depth of erosive material and a homogeneous particle-size distribution. It is generally accepted that the Froehlich equation (abutment scour) gives “excessively conservative estimates of scour depths” (Richardson and others, 1993, p. 48). Usually, computed scour depths are evaluated in combination with other information including (but not limited to) historical performance during flood events, the geomorphic stability assessment, existing scour protection measures, and the results of the hydraulic analyses. Therefore, scour depths adopted by VTAOT may differ from the computed values documented herein.

Vermont↗

USGS2020

Recent planform changes in the Upper Mississippi River

Geomorphic changes in the Upper Mississippi River (UMR) have long been a concern of river agencies charged with maintaining and restoring river habitat (GREAT 1980; Jackson et al. 1981; USFWS 1992). Large meandering alluvial rivers like the UMR are expected to constantly change and adjust their fluvial landforms within their riparian corridors as a result of the natural interaction of hydrologic processes, sediment movement, and vegetation over time. However, present geomorphic changes in the UMR reflect altered hydrologic, hydraulic, and sediment conditions caused by regulated flows, constructed agricultural levees and navigation dams, altered land use in the watershed, and climate change. Levees reduce lateral hydrologic and sediment connectivity between channels and floodplains on many tributaries and on the Mississippi River downstream of Pool 13. Between each of the dams are a repeating series of landforms associated with tailwater, intermediate, and impounded conditions. The dams maintain a minimum water level, thus creating many off-channel areas that act as sediment traps. Whereas high-head dams cut off sedimentological connectivity longitudinally through the river corridor (Skalak et al., 2013), low head dams on the UMR only slightly altered transport longitudinally. Deltaic-like sedimentation can be common in the impounded sections of dammed rivers. Erosion of relict land surfaces that remained above the raised impounded water levels has been the dominant change in UMR impounded sections due to increased wind fetch leading to increased wave action. Even though upland sources of sediment from tributaries have decreased over the middle to late 20th century, increased annual precipitation, the interplay of increased variability in flood magnitudes from year to year, and more fall and winter flooding have likely changed erosion and sedimentation patterns in the UMR (Belby, et al., 2019). Paradoxically, monitoring and research indicates that the concentration of some water column constituents like total suspended solids and phosphorous has decreased during the 1991 to 2014 time period (Kreiling and Houser, 2016). In areas prone to increased sedimentation, bed elevations rise and thereby water depths are reduced at a given discharge, resulting in loss of fish habitat. Sediment deposition or erosion further influences water exchange rates between main channel and off-channel areas in the river by increasing resistance in connecting channels or enlarging existing connecting channels. Water depth and water exchange rates are the most prominent features describing habitat quality in the UMR (De Jager et al. 2018), and in some cases, the trajectory of planform change from heightened deposition promises to threaten deep backwater habitats particularly important for overwintering fish. Although information on the rate of vertical change in bed elevation is needed for a complete assessment of geomorphic change associated with the loss of deep backwater habitats, mapping planform changes over time (i.e., lateral changes between the land-water boundary) provide needed information on the location, potential cause, and progressive direction of deposition, especially in the mid sections between dams where deltaic processes are the most pronounced. Several types of planform changes have been observed and identified as concerns. For example, island loss in the large impounded areas of the upper part of the UMR was one of the concerns identified by river managers in the 1980s and 90s, and subsequently island construction became a common form of restoration implemented by the Upper Mississippi River Restoration (UMRR) Program (USACE 2012). Other subtler planform changes, such as channel bank erosion and delta formation in backwaters, are perceived to be important, but have largely gone unquantified. A systemwide reconnaissance of the UMR and IWW conducted in 1998 concluded that 14-percent of the river banks were eroding (Nakato and Anderson 1998). However, stabilization of existing river banks has never been widely pursued as a restoration measure, due to the high cost and uncertain benefits. Delta formation reduces the amount of backwater habitat; however, the deltas maintain and create a mix of riparian and aquatic habitats, and that is generally considered to be beneficial for wildlife and fish. If recent hydrologic trends of more frequent and longer duration flood events continue, a better understanding of planform changes can help in describing past changes, and then be used to forecast potential future trajectories of change. If UMR resource managers determine that past and forecasted conditions are undesirable, then UMRR projects could be identified and prioritized to address those concerns. Vegetative cover associations with landform changes have been used to detect and quantify planform changes in many rivers (Johnson 1985; Hiatt 2015; Volte et al. 2015). Freyer and Jefferson (2013) completed such a study in Pool 6 of the UMR using the landcover data from 12 dates over a 115-yr period, including the 1989, 2000, and 2010/2011 landcover/use (LCU) data from the UMRR Program. Planform change detected over the last 20 years represented by the UMRR Program data best reflect present-day geomorphic patterns, rates and processes. Changes occurring prior to dam construction and changes occurring soon after dam construction are likely not the same as those happening now, 50-70 years after dam construction and creation of the impoundments (McHenry et al., 1984; Bhowmik and Adams, 1986; WEST Consultants, 2000). The LCU data from each of the 1989, 2000, and 2010/2011 imagery was developed using similar methods and is available in a Geographical Information System (GIS) for the entire UMR and therefore provides the opportunity for a more comprehensive planform change analysis. This study used GIS overlays of LCU classes to map and quantify changes in planform features over two periods, looking specifically for depositional areas where terrestrial and wetland vegetation expanded at the expense of open water. The land expansion was grouped into four possible process-based types common in large floodplain rivers, some following that used by Lewin et al. (2017). The four types include: crevasse deltas emanating from a breach from a main channel through a natural levee or narrow floodplain into backwaters (crevasse deltas), tributary deltas expanding into backwaters (tributary deltas), deltaic bars at the upstream end of impoundments (impounded deltas), and linear-like bars extending from the downstream ends of narrow levees and remnant floodplains (bar-tail limbs). The methods deployed for change detection addressed possible errors from a variety of sources.

Illinois, Iowa, Minnesota, Missouri, Wisconsin↗

USGS2025

Evaluating drought risk of the Red River of the North Basin using historical and stochastic streamflow upstream from Emerson, Manitoba

Drought and its effect on streamflow are important to understand because of the potential to adversely affect water supply, agricultural production, and ecological conditions. The Red River of the North Basin in north-central United States and central Canada is susceptible to dry conditions. During an extended drought, streamflow conditions in the Red River of the North may become inadequate to support existing water supply needs in the basin for agriculture, industry, human use, and aquatic life. To understand potential future low-streamflow conditions in the Red River of the North Basin, the U.S. Geological Survey, in cooperation with the International Joint Commission, North Dakota Department of Water Resources, Red River Joint Water Resource District, and Red River Watershed Management Board, developed a water-balance model of the Red River of the North Basin upstream from Emerson, Manitoba, Canada, and coupled the model with stochastic weather inputs to simulate possible future low-streamflow conditions. Historical changes in low-streamflow conditions were characterized across the Red River of the North Basin using multiple change-point analysis for 12 streamgages. Across these stations, significant change-point years in 1943 and 1994 marked increases in the magnitude of low-streamflow conditions. During 1920–2015, conversion of primary land (not affected by human use) to agricultural and secondary land was followed by a conversion from smalls grains to corn and soybeans as the dominant crop type. From land-use analysis, 1940–2000 was determined to have relatively stable land use and therefore was used as the calibration period for the water-balance model. A deterministic water-balance model was developed for the Red River of the North Basin upstream from Emerson, Manitoba. The water-balance model was calibrated with data from 37 U.S. Geological Survey streamgages for 1940–2000 and verified using data for 2001–15. The calibrated water-balance model simulated streamflow distributions that mirrored the seasonal patterns of the observed mean monthly streamflow and the standard deviation of the monthly streamflow data, especially during the fall and winter months when streamflow was lowest. For the verification period, during the low-streamflow months of December through January, the difference between simulated and observed data was similar to the calibration comparison and successfully reproduced seasonal trends in the distribution of streamflow, even when using weather data that were outside the calibration period. To determine the future risk of low-streamflow conditions in the Red River of the North Basin, a block-bootstrap method was used to generate multiple possible future climates. These stochastically generated weather time series were then input to a water-balance model to simulate a distribution of possible streamflows. Three sets of experiments were performed, with each experiment containing a set of scenarios. The first set of experiments from the stochastic streamflow model were designed to investigate how changes in reservoir management would affect the distribution of low streamflow. Relative to scenario 1 (present-day [2023] reservoir operation), scenario 2 (no reservoir operation) shifted the low-streamflow frequency curves downward, reducing the annual minimum monthly streamflow for the Emerson subbasin. Subbasins were defined by the contributing area upstream from a selected streamgage station. Relative to scenario 1, scenario 3 (regulated streamflow with an increased reservoir capacity of 10 percent) shifted the low-streamflow frequency curves upward for the Emerson subbasin. The magnitude of this upward shift, caused by increased reservoir capacity, was lower than the magnitude of the shift caused by the absence of the reservoirs, which indicates that the streamflow was most affected when the reservoirs were first constructed. The second set of experiments from the stochastic streamflow model included two scenarios that were performed to better understand how the Red River of the North Basin responds to long periods of low or high precipitation. The results indicate that the model consistently overestimated streamflow, but the relative change between a wet and dry climate state of simulated streamflow distribution reasonably matched the relative change of historical streamflow. Across the subbasins, the model was most accurate for low-streamflow conditions associated with nonexceedance probabilities between 20 and 40 percent. The third set of experiments from the stochastic streamflow model were done to investigate low-streamflow response across the basin to several drought events. Low-end streamflow was reduced when the basin was exposed to a drought, and the magnitude of the reduction increased with longer or more intense droughts. Compared to the low-intensity drought scenarios, the range of percent reductions (as indicated by the interquartile range) was larger for the high-intensity drought scenarios for all subbasins, and the subbasins of Grand Forks and Emerson had a smaller range of reductions compared to the other three subbasins. The larger drainage area—combined with the large contribution of the Red Lake River and several other Minnesota tributaries that generally experience wetter climate conditions—upstream from the Emerson and Grand Forks subbasins may contribute to the smaller range in reductions under the high intensity scenarios. Comparison of the percent reduction in low-end streamflow among subbasins also indicated that the effects of drought duration and intensity could be cumulative. Combining factors of time and intensity produced a larger reduction in streamflow than when each effect was isolated. The array of drought scenarios can be used to determine how a subbasin would respond to multiple possible future conditions. Based on climate predictions, the drought scenario that best matches a future anticipated drought scenario can be used to estimate a low streamflow response for a given subbasin.

Manitoba, Minnesota, North Dakota↗

USGS2012

Characterization of major-ion chemistry and nutrients in headwater streams along the Appalachian National Scenic Trail and within adjacent watersheds, Maine to Georgia

An inventory of water-quality data on field parameters, major ions, and nutrients provided a summary of water quality in headwater (first- and second-order) streams within watersheds along the Appalachian National Scenic Trail (Appalachian Trail). Data from 1,817 sampling sites in 831 catchments were used for the water-quality summary. Catchment delineations from NHDPlus were used as the fundamental geographic units for this project. Criteria used to evaluate sampling sites for inclusion were based on selected physical attributes of the catchments adjacent to the Appalachian Trail, including stream elevation, percentage of developed land cover, and percentage of agricultural land cover. The headwater streams of the Appalachian Trail are generally dilute waters, with low pH, low acid neutralizing capacity (ANC), and low concentrations of nutrients. The median pH value was slightly acidic at 6.7; the median specific conductance value was 23.6 microsiemens per centimeter, and the median ANC value was 98.7 milliequivalents per liter (μeq/L). Median concentrations of cations (calcium, magnesium, sodium, and potassium) were each less than 1.5 milligrams per liter (mg/L), and median concentrations of anions (bicarbonate, chloride, fluoride, sulfate, and nitrate) were less than 10 mg/L. Differences in water-quality constituent levels along the Appalachian Trail may be related to elevation, atmospheric deposition, geology, and land cover. Spatial variations were summarized by ecological sections (ecosections) developed by the U.S. Forest Service. Specific conductance, pH, ANC, and concentrations of major ions (calcium, chloride, magnesium, sodium, and sulfate) were all negatively correlated with elevation. The highest elevation ecosections (White Mountains, Blue Ridge Mountains, and Allegheny Mountains) had the lowest pH, ANC, and concentrations of major ions. The lowest elevation ecosections (Lower New England and Hudson Valley) generally had the highest pH, ANC, and concentrations of major ions. The geology in discrete portions of these two ecosections was classified as containing carbonate minerals which has likely influenced the chemical character of the streamwater. Specific conductance, pH, ANC, and concentrations of major ions (calcium, chloride, magnesium, sodium, and sulfate) were all positively correlated with percentages of developed and agricultural land uses at the lower elevations of the central region of the Appalachian Trail (including the Green-Taconic-Berkshire Mountains, Lower New England, Hudson Valley, and Northern Ridge and Valley ecosections). The distinctly different chemical character of the streams in the central sections of the Appalachian Trail is likely related to the lower elevations, the presence of carbonate minerals in the geology, higher percentages of developed and agricultural land uses, and possibly the higher inputs of sulfate and nitrate from atmospheric deposition. Acid deposition of sulfate and nitrate are important influences on the acid-base chemistry of the surface waters of the Appalachian Trail. Atmospheric deposition estimates are consistently high (more than 18 kilograms per hectare (kg/ha) for sulfate, and more than 16 kg/ha for nitrate) at both the highest and lowest elevations. However, the lowest elevation (Green-Taconic-Berkshire Mountains, Lower New England, Hudson Valley, Northern Glaciated Allegheny Plateau, and Northern Ridge and Valley ecosections) included the largest spatial area of sustained high estimates of atmospheric deposition. Calcium-bicarbonate was the most frequently calculated water type in the Lower New England and Hudson Valley ecosections. In the northern and southern sections of the Appalachian Trail mix-cation water types were most prevalent and sulfate was the predominate anion. The predominance of the sulfate anion in the surface waters of the northern and southern ecosections likely reflects the influence of sulfate deposition. Although the central portion of the Appalachian Trail has the largest spatial area of high atmospheric acid deposition, the lower ionic strength waters in the northern and southern ecosections of the Appalachian Trail may have been more adversely affected by acid deposition. The low ionic strength of the streams in the White Mountains, Blue Ridge Mountains, and Allegheny Mountains ecosections makes parts of these regions susceptible to seasonal or event-driven episodic acidification, which can be detrimental to health of aquatic and terrestrial ecosystems. Median catchment ANC values were classified into three groups - acidic, sensitive, and insensitive. The White Mountains, Blue Ridge Mountains, and Allegheny Mountains ecosections included the highest frequency of catchments classified as acidic or sensitive. More than 56 percent of the catchments from the White Mountains ecosection were classified as sensitive to acidic inputs. In the Blue Ridge ecosection, 1.6 percent of the catchments were classified as acidic, and 38.2 percent of the catchments were classified as sensitive to acidic inputs. In the Allegheny Mountains ecosection, 17.6 percent of the catchments were classified as acidic, and 29.4 percent of the catchments were classified as sensitive to acidic inputs. Median concentrations of nitrogen species were less than 0.4 mg/L, and median concentrations of total phosphorus were less than 0.02 mg/L along the Appalachian Trail. A comparison of median catchment concentrations of nutrients to estimated national background concentrations demonstrated that concentrations along the Appalachian Trail are generally lower. A comparison of median concentrations of total nitrogen and total phosphorus to the U.S. Environmental Protection Agency's (USEPA) nutrient criteria for the Eastern U.S. ecoregions showed that the concentrations of total nitrogen in the northern section of the Appalachian Trail were generally higher than the USEPA criterion. Similarly, median concentrations of total phosphorus in the southern regions of the Appalachian Trail were approximately twice as high as USEPA criteria. Sections of the Appalachian Trail are adjacent to modest amounts of agricultural and developed land areas. These nonforested land areas may be contributing to the percentage of catchments in which concentrations of total nitrogen and total phosphorus are higher than USEPA nutrient ecoregion criteria.

Connecticut, Georgia, Maine, Massachusetts, Maryla↗

USGS2015

California State Waters Map Series — Offshore of Pacifica, California

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 100 m) subsurface geology. The Offshore of Pacifica map area is located in northern California, on the Pacific coast of the San Francisco Peninsula about 10 kilometers south of the Golden Gate. The map area extends from Daly City, through Pacifica, to the small coastal community of Montara. Much of the coastal zone is managed by either the State of California or local governments, including Thornton Beach State Park, Mussel Rock Park, Pacifica State Beach, Gray Whale Cove State Beach, and Montara State Beach. The major structure in the transform boundary between the Pacific and North American tectonic plates, the northwest-striking San Andreas Fault, cuts through the map area, crossing the shoreline near Mussel Rock before continuing offshore. The epicenter of the great 1906 California earthquake is located on the offshore part of the San Andreas Fault Zone a few kilometers north of the map area. The map area is located at the northwest end of the Santa Cruz Mountains, much of which has been uplifted in the last 400,000 years. Southwest of the San Andreas Fault Zone, this uplift has resulted in a highly variable coastal morphology characterized by long, narrow beaches bounded by steep cliffs or marine terraces, small pocket beaches surrounded by rocky promontories, and steep, narrow coastal watersheds. Geologic units mapped along the coast include sedimentary, volcanic, and metamorphic rocks of the Franciscan Complex; Cretaceous granitic rocks; Tertiary sedimentary rocks; and Quaternary coastal marine terraces, deep-seated and shallow landslides, and beach and sand dune deposits, all of which contribute sediment to the coastal zone. In contrast to the more rural coastal zone to the south, the highly urbanized coastal zone north of Mussel Rock and the San Andreas Fault Zone is characterized by a narrow beach bounded by steep, 50- to 120-m-high cliffs made up of sand, silt, and clay of the Pliocene and Pleistocene Merced Formation, the source of numerous landslides. Two large landslides along “Northridge bluff” in 2003 and 2007 had estimated volumes of 305,800 to 382,300 m 3 and 120,800 m 3 , respectively. Coastal landslides also are an issue to the south between Mussel Rock and Mori Point, even as bluffs diminish in height and pocket beaches transition to a more continuous strand bounded by Quaternary-age dunes and low-lying marine terraces. Mori Point, a coastal promontory in Pacifica underlain by rocks of the Franciscan Complex, rises abruptly to a height of 90 m from the shoreline. Pocket beaches characterize the shoreline from Mori Point south to Shelter Cove, the largest of which, Pacifica State Beach, is at the mouth of San Pedro Creek. The coastal zone south of Pacifica, which stretches from Shelter Cove to Montara and includes Point San Pedro and Devils Slide, lies at the northwest end of San Pedro Mountain (underlain largely by early Tertiary sedimentary rocks) and Montara Mountain (underlain by Cretaceous granitic rocks). Elevations at Montara Mountain exceed 500 m just 4 km from the shoreline, and steep cliffs along the coast are as high as 275 m. This rugged terrain results in numerous rocky promontories, small pocket beaches, and large coastal landslides. Slope failures along Devils Slide are notorious for closing California Highway 1, creating such a large and persistent problem that the California Department of Transportation has bypassed this coastal section by tunneling through San Pedro Mountain; the tunnel was completed and the new section of highway opened in 2013. Coastal relief diminishes at Montara in the southernmost part of the map area, where the shoreline is bounded by 10- to 20-m-high marine terraces. Throughout the year, this part of the coast is exposed to the north Pacific swell, the southern swell, northwest wind waves, and local wind waves. The north Pacific swell dominates in winter months, having wave heights that range from 2 to 10 m at offshore buoys and wave periods that range from 10 to 25 s. During summer months, the largest waves come from the southern swell, generated by storms in the south Pacific and offshore of Central America. Characteristically, these swells have smaller wave heights (0.3–3 m) but similarly long wave periods (10–25 s). Local wind waves are most common from October to April, whereas northwest wind waves affect the coast throughout the year. These two wind-wave regimes typically have wave heights of 1 to 4 m and short wave periods (3–10 s). Unlike many other parts of the California coast where sediment is supplied primarily from river and (or) stream runoff, sediment supply to the offshore along this part of northern California is a complex mixture of (1) sand transported from the coast north of the Golden Gate, (2) sediment transported to the coast through the San Francisco Bay via the Golden Gate and then dispersed over the adjacent ebb-tide delta, and (3) varying volumes of sediment eroded from adjacent steep coastal bluffs caused by wave-induced landslides and other erosional events. Additionally, since the 1980s, coastal erosion south of the Golden Gate has increased substantially between Ocean Beach (on the west coast of San Francisco, about 5 km north of the map area) and Point San Pedro. The combined sediment load is transported southward along the coast by the generally north-to-south alongshore current, which develops in response to the energetic winter-wave climate associated with the north Pacific swell. Overall, beaches in the map area have a long-term erosional trend, except near Mussel Rock where a long-term accretionary trend may reflect increased sediment supply from landslides. Beach-front riprap armoring and retaining walls are used locally to protect the shoreline from seasonal storm waves, most notably between Mussel Rock and Mori Point. The continental shelf in the map area is about 40 km wide, with water depths at the shelf break that range from about 80 to 120 m. Within California’s State Waters, the midshelf to inner shelf areas are characterized by a relatively flat, shallow (water depths of as much as 44 m) seafloor that dips gently (about 0.2° to 0.3°) westward. The seafloor is composed primarily of unconsolidated Holocene sediment (marine deposits), as well as some nearshore bedrock outcrops that consist primarily of rocks of the Tertiary Purisima Formation and also Cretaceous plutonic rocks (granite or granodiorite).

California↗

USGS2014

Methow River Studies, Washington: abundance estimates from Beaver Creek and the Chewuch River screw trap, methodology testing in the Whitefish Island side channel, and survival and detection estimates from hatchery fish releases, 2013

Salmon and steelhead populations have been severely depleted in the Columbia River from factors such as the presence of tributary dams, unscreened irrigation diversions, and habitat degradation from logging, mining, grazing, and others (Raymond, 1988). The U.S. Geological Survey (USGS) has been funded by the Bureau of Reclamation (Reclamation) to provide evaluation of on-going Reclamation funded efforts to recover Endangered Species Act (ESA) listed anadromous salmonid populations in the Methow River watershed, a watershed of the Columbia River in the Upper Columbia River Basin, in north-central Washington State (fig. 1). This monitoring and evaluation program was funded to document Reclamation’s effort to partially fulfill the 2008 Federal Columbia River Power System Biological Opinion (BiOp) (National Oceanographic and Atmospheric Administration, Fisheries Division 2003). This Biological Opinion includes Reasonable and Prudent Alternatives (RPA) to protect listed salmon and steelhead across their life cycle. Species of concern in the Methow River include Upper Columbia River (UCR) spring Chinook salmon ( Oncorhynchus tshawytscha ), UCR summer steelhead ( O. mykiss ), and bull trout ( Salvelinus confluentus ), which are all listed as threatened or endangered under the ESA. The work done by the USGS since 2004 has encompassed three phases of work. The first phase started in 2004 and continued through 2012. This first phase involved the evaluation of stream colonization and fish production in Beaver Creek following the modification of several water diversions (2000–2006) that were acting as barriers to upstream fish movement. Products to date from this work include: Ruttenburg (2007), Connolly and others (2008), Martens and Connolly (2008), Connolly (2010), Connolly and others (2010), Martens and Connolly (2010), Benjamin and others (2012), Romine and others (2013a), Weigel and others (2013a, 2013b, 2013c), and Martens and others (2014). The second phase, initiated in 2008, focuses on the evaluation of the M2 reach (rkm 66– 80) of the mainstem Methow River prior to restoration actions planned by Reclamation and Yakama Nation. The M2 study was designed to help understand the inter-relationships between stream habitat and the life history of various fish species to explain potential success or limitations in response to restoration actions. To help document changes derived by restoration, two reference reaches (Upper Methow between rkm 85 and 90, and Chewuch River between rkm 4 and 11) were identified based on relative lack of disturbance, proximity to the restoration reach, and relative unconfined geomorphology. A control reach (Lower Methow between rkm 57 and 64, also referred to as “Silver Reach”) was 2 identified based on its similar disturbance as the reference reach, proximity to the restoration reach, and relatively unconfined geomorphology. Products to date include Barber and others (2011), Bellmore (2011), Tibbits and others (2012), Bellmore and others (2013), Benjamin and others (2013), Romine and others (2013b), Bellmore and other (2014), Martens and others (2014), and Martens and Connolly (2014). The third phase of work has been to help with the development and to provide data for modeling efforts. Most of the planned M2 reach restoration is focused on the creation or improvement of offchannel habitat, especially side channels. The pre-restoration portion of this study has been documented by Martens and Connolly (2014). Side channel restoration actions were initiated in 2012 (Whitefish Island side channel, also referred to as SC3; rkm 76) and are planned to continue over the next several years. The Whitefish Island side channel was modified to maintain hydrological connection with the mainstem throughout the year. In addition, several log structures were installed and pools were deepened to create fish habitat. Prior to restoration, this side channel would lose hydrological connection with the mainstem Methow River, leaving one large pool near the bottom of the side channel and several shallow isolated pools that may or may not go dry. In seasonally connected side channels, juvenile salmonid survival in pools less than 100 cm average depth was lower than in pools greater than 100 cm average depth (Martens and Connolly, 2014). In this report, we document our field work and analysis completed in 2013. During 2013, USGS sampling efforts were focused on resampling of three reaches in Beaver Creek, testing methodology in the Whitefish Island side channel, conducting hatchery survival estimates, and operating a screw trap on the Chewuch River (funded by Yakama Nation; fig. 1). The Beaver Creek sampling effort was a revisit of three index sites sampled continuously from 2004 to 2007 to look at the fish response to barrier removal. Methodology testing in Whitefish Island side channel was done to determine the best method for evaluating fish populations after restoration efforts in side channels (previous sampling methods were determined to be ineffective after pools were deepened). Hatchery survival estimates were completed to monitor fish survival in the Methow and Columbia Rivers, while the screw trap was operated to estimate migrating fish populations in the Chewuch River and track passive integrated transponder (PIT)-tagged fish. In addition, we maintained a network of PIT-tag interrogation systems (PTIS), assisted Reclamation with fish removal events associated with stream restoration (two people for 9 days; 14 percent of summer field season), and conducted a stream metabolism study designed to help parameterize and calibrate the stream productivity model (Bellmore and others, 2014) with model validation.

Washington↗

USGS2020

Sediment and chemical contaminant loads in tributaries to the Anacostia River, Washington, District of Columbia, 2016–17

A study was conducted by the U.S. Geological Survey (USGS) in cooperation with the Washington, D.C., Department of Energy & Environment to estimate the loads of suspended-sediment-bound chemical compounds in five gaged tributaries and four ungaged tributaries of the Anacostia River (known locally as “Lower Anacostia River”) in Washington, D.C. Tributaries whose discharge is measured by the USGS are the Northeast and Northwest Branches of the Anacostia River, referred to in this report as “Northeast Branch” (NEB) and “Northwest Branch” (NWB), respectively; Watts Branch (WB); and Hickey Run (HR). A USGS streamflow-gaging station was established in 2016 on Beaverdam Creek (known locally as “Lower Beaverdam Creek” [LBDC]) to support this study. The ungaged streams studied include Nash Run; Pope Branch; an unnamed stream at Fort DuPont, referred to in this report as “Fort DuPont Creek”; and an unnamed stream at Fort Stanton, referred to in this report as “Fort Stanton Creek.” The gaged streams were sampled during four to five storms and two low-flow events during January, March, May, and July 2017. The ungaged streams were sampled during one storm and one low-flow event during July 2017. Storm sampling involved collecting large-volume (60- to 70-liter) composite samples, then removing sediment by filtration in the laboratory. Low-flow samples were obtained by filtering streamwater directly in the field. Continuously recording data sondes were deployed throughout the study to measure turbidity and other water-quality characteristics. During sampling, multiple discrete samples of streamwater were collected to determine suspended-sediment concentration (SSC) and particulate organic carbon (POC) concentration. Shortly after each storm, bed sediment was collected for chemical analysis. Sediment samples were analyzed for 209 polychlorinated biphenyl (PCB) congeners; 35 polyaromatic hydrocarbon (PAH) compounds, including 20 nonalkylated and 15 alkylated species; and 20 organochlorine pesticide (OP) compounds. Sediment from one storm was analyzed for 23 metals. Relations were developed among turbidity, discharge, and measured SSC by using multiple linear regression of log-transformed data. These relations were used to estimate SSC from continuous records of discharge and turbidity and were subsequently used to estimate sediment loads for the 2017 calendar year. USGS continuous records of turbidity in NEB, NWB, Watts Branch, and Hickey Run were available for 2013–17, which allowed sediment loads to be calculated for these years. Sediment loads for the ungaged streams were estimated by using loads measured in Watts Branch adjusted on the basis of stream-basin areas. Sediment loads for 2017 total 3.10×10 7 kilograms (kg), with 1.02×107 kg (33 percent of total) from the NEB, 1.55×10 7 kg (50 percent) from the NWB, 4.45×10 6 kg (14 percent) from LBDC, 5.62×10 5 kg (2 percent) from Watts Branch, and 2.82×10 5 kg (1 percent) from Hickey Run. Sediment yields were highest from NWB and LBDC (3.13×10 5 kilograms per year per square mile [kg/yr/mi 2 ] and 3.01 kg/yr/mi 2 , respectively). As a result of gaps in turbidity and discharge data, the load for LBDC reported here was calculated from measurements representing only 88 percent of the year (2017), and thus underestimates the actual load. All other gaged tributaries had datasets covering 100 percent of the year and are considered to fully represent actual loads. Estimated sediment loads for the ungaged streams during 2017 total 3.5×10 5 kg, with 1.2×10 5 kg from Nash Run, 6.2×10 4 kg from Pope Branch, 1.1×10 5 kg from Fort DuPont Creek, and 5.6×10 4 kg from Fort Stanton Creek. Concentrations of PCBs, PAHs, and chlorinated pesticides in streamwater are presented for stormflow and low-flow conditions. Average concentrations (in stormflow and low-flow samples) of total PCBs (sum of all congeners, including coelutions) are 5.9 micrograms per kilogram (µg/kg) for NEB, 6.6 µg/kg for NWB, 130 µg/kg for LBDC, 34 µg/kg for Watts Branch, and 69 µg/kg for Hickey Run. Average concentrations of total PAHs (tPAH) (total of nonalkylated and alkylated species) are 2,000 µg/kg for NEB, 3,300 µg/kg for NWB, 2,200 µg/kg for LBDC, 2,400 µg/kg for Watts Branch, and 18,000 µg/kg for Hickey Run. tPAH concentrations among the ungaged streams were highest in Nash Run (5,500 µg/kg); concentrations in the other ungaged streams were less than (<) 700 µg/kg. The general magnitude of tPCB and tPAH concentrations in streamwater samples was low-flow samples greater than (>) stormflow samples greater than or equal to (≥) bed-sediment samples. PCB congener profiles in the three types of samples were nearly identical in each stream and were similar in all streams except for LBDC, where the dominant PCBs shifted to the lighter di- through tetra- homologs. LBDC showed higher tPCB concentrations and a distinct congener profile from the other streams. The similarity in congener makeup supported that averaging PCB concentrations in stormflow and low-flow samples was appropriate for calculating chemical loads. Loads of tPCB, tPAH (total of alkylated and nonalkylated forms), and pesticides were estimated for each stream by multiplying average contaminant concentrations by the respective sediment loads. Total PCB loads for 2017 were estimated to be 820 grams (g) with 8 percent (60 g) from NEB, 12 percent (95 g) from NWB, 75 percent (590 g) from LBDC, 3 percent (25 g) from Watts Branch, and 2.5 percent (19 g) from Hickey Run. PCB toxicity totaled 3.8×10 −3 µg/kg, with the largest contribution (47 percent) derived from LBDC. Total PAH loads (sum of alkylated and nonalkylated forms) for 2017 were estimated to be 89,000 g, with 23 percent (20,000 g) from NEB, 59 percent (52,000 g) from NWB, 11 percent (9,800 g) from LBDC, 2 percent (1,400 g) from Watts Branch, and 6 percent (5,200 g) from Hickey Run. These results indicate that the largest contributor (75 percent) of PCBs to the Anacostia River is LBDC, although it contributes only 15 percent of the sediment and its basin area represents only 10 percent of the area of the Anacostia River watershed. The majority of the PAH load originates from NWB (59 percent of total) and NEB (22 percent). The ungaged tributaries contribute extremely small loads of PCBs and PAHs, totaling 8.1 g and 765 kg, respectively. More than 94 percent of the total load from the ungaged tributaries is derived from the Nash Run Basin. Various organochlorine pesticides were present in suspended and bed sediment from all gaged and ungaged tributaries; however, elevated detection levels associated with the analytical methods resulted in numerous unquantifiable concentrations in the suspended-sediment samples. Only the pesticide chlordane was found in measurable concentrations in all gaged tributaries. As a result, in this report, a combination of analytical data from suspended-sediment and bed-sediment samples was used to estimate the maximum pesticide loading for each tributary. Chlordane was the principal compound present in the gaged tributaries; the highest average concentration (average of stormflow and low-flow samples from each stream) was 62 µg/kg in sediment from Watts Branch. Chlordane loads for 2017 totaled 1,100 g, of which 7 percent (430 g) was from NEB, 28 percent (320 g) was from NWB, 28 percent (310 g) was from LBDC, 5 percent (56 g) was from Watts Branch, and 1 percent (11 g) was from Hickey Run. Chlordane was not present in suspended or bed sediment from any of the ungaged tributaries. Loads of the other pesticides were estimated by using the highest concentration measured in the combined suspended-sediment and bed-sediment data for each stream. Notable loads include dieldrin (860 g from NWB), methoxychlor (205 g from LBDC), endrin aldehyde (150 g from NWB), and 4,4-DDT (79 g from Watts Branch). Compared with pesticide loads from the gaged streams, those from the ungaged streams were minimal, with only the Pope Branch contribution exceeding 1 gram per year for 4,4-DDE (1.05 g) and 4,4’-DDT (1.3 g). The results of this study show that the dominant source of PCBs and chlordane is LBDC, despite its relatively small basin area. PAHs are ubiquitous throughout the study area, with the largest sources being NEB and NWB; this finding is a result of the large sediment load originating from these basins. The small, ungaged streams supply only minimal PCB and PAH loads, with Nash Run being the largest contributor.

District of Columbia↗

USGS2018

Mercury on a landscape scale—Balancing regional export with wildlife health

The Cosumnes River watershed requires a 57–64 percent reduction in loads to meet the new Delta methylmercury (MeHg) total maximum daily load allocation, established by the Central Valley Regional Water Quality Control Board. Because there are no large point sources of MeHg in the watershed, the focus of MeHg load reductions will fall upon non-point sources, particularly the expansive wetlands considered to be a primary source of MeHg in the region. Few management practices have been implemented and tested in order to meet load reductions in managed wetlands, but recent efforts have shown promise. This project examines a treatment approach to reduce MeHg loads to the Sacramento-San Joaquin River Delta by creating open-water deep cells with a small footprint at the downstream end of wetlands to promote net demethylation of MeHg and to minimize MeHg and Hg loads exiting wetlands at the Cosumnes River Preserve. Specifically, the deep cells were were located immediately up gradient of the wetland’s outflow weir and were deep enough (75–91 centimeter depth) to be vegetation-free. The topographic and hydrologic structure of each treatment wetland was modified to include open-water deep cells so that the removal of aqueous MeHg might be enhanced through (1) particle settling, (2) photo-degradation, and (3) benthic microbial demethylation. These deep cells were, therefore, expected to clean MeHg from surface water prior to its discharge to the Cosumnes River and the downstream Delta. Our goal was to test whether the implementation of the deep cells within wetlands would minimize MeHg and total Hg export. Further, we sought to test whether continuous flow-through hydrology, would lower MeHg concentrations in resident biota, compared to traditional wetland management operations. The dominant practice in seasonal wetlands management is the “fill-and-maintain” approach, in which wetlands are filled with water and the water levels maintained without substantial draining until drawdown. Our approach was to create and characterize replicate treatment wetland complexes, in conjunction with monitoring of hydrologic, biologic, and chemical indicators of MeHg exposure for two full annual cycles within winter-spring flooded seasonal wetlands. In addition to the creation of deep cells within treatment wetlands, hydrology was manipulated so that there was a constant flow-through of water, while the control wetlands utilized the fill-and-maintain approach. Specifically, the treatment wetlands were maintained in a flow-through manner, while the control wetlands were maintained in a fill-and-maintain manner from September through May, to test the hypothesis that the flow of water through the seasonal wetland can lower fish bioaccumulation through dilution of MeHg-concentrated water within the wetland by constant inflows of water into the wetland. The major tasks of this study included: (1) field design and implementation, (2) water and wetland management, (3) hydrologic monitoring and water quality sampling, (4) MeHg export and load estimates, (5) caged fish experiments for examining MeHg bioaccumulation, (6) site and process characterization to improve understanding and transferability of results, (7) adaptive management, transferability, and outreach, and (8) reporting of results and conclusions. This report summarizes the key findings of this study, which focuses on MeHg load estimates from control and treatment wetlands, quantification of three MeHg removal mechanisms (particulate settling, benthic demethylation, and photo-demethylation) in the deep cells within the treatment wetlands, and MeHg bioaccumulation in wetland fishes. Key findings include: Over two years of study, mean whole-water MeHg load decreased 37 percent in deep cells, when comparing inlet of check weir flows to outlet. Of the 37 percent MeHg load removed within the deep cell, photodegradation accounted for 7 percent and particle flux to the benthos accounted for 24 percent of the mass removed, with the remaining 6 percent apparent MeHg loss unexplained. Benthic MeHg degradation did not appear to be a major MeHg removal process in the deep cells, as changes in the ambient MeHg pool over 7-day bottle incubations showed that the surface sediment exhibited net MeHg production in the majority (87 percent) of incubation experiments. In only 13 percent of the incubations (3 out of 24) was net MeHg degradation observed. Estimates of benthic diffusive flux of MeHg across the sediment/water interface were small relative to particulate flux and variable (positive or negative), suggesting this is likely a minor term in the overall MeHg budget within the deep cells. Although the deep cells served as net MeHg sink overall, MeHg export from the flow-through treatment wetlands (shallow and deep combined) exceeded export from the fill-and-maintain managed control wetlands, because of the differences in hydrologic management between the two wetland types. Shallow wetlands under flow-through conditions generated a net export of MeHg. Most of the annual MeHg export from the treatment wetlands occurred within the first 3 months of flood up (September to November), shortly after hydrologic management began. Despite the effectiveness of the deep cell in lowering MeHg export concentrations, total mercury (THg) concentration did not decrease in biosentinel fish ( Gambusia affinis , Mosquitofish) between the deep cell inlet and outlet. Mosquitofish THg concentrations were higher in treatment wetlands than in control wetlands during the first year of study, likely because of an associated increase in MeHg availability immediately following wetland construction activities. Mosquitofish THg concentrations declined in the treatment wetlands during the second year of study, and fish THg concentrations in treatment wetlands were no different from those in the control. Similarly, the increased hydrologic flow rates in the treatment wetlands did not lower fish THg concentrations nor aqueous MeHg concentrations in the shallow cells, suggesting that MeHg flux from the sediment to water column exceeded the flow-through flushing rate in the shallow portion of the treatment wetlands. Reductions in MeHg concentrations of surface water and fish may require higher flow rates than used in the study to achieve the region’s regulatory goals. However, the flow rates necessary may not be feasible for these managed wetlands because of limited water supply and the associated costs for water and pumping. The use of deep cells in seasonal wetlands were effective in lowering MeHg exports under continuous water flow-through hydrology. However, fill-and-maintain hydrology had lower exports overall, because of a single major drainage event at the end of the flood season. Future studies focused on limiting MeHg export should consider combining deep cells with the fill-and-maintain or fill-and-trickle hydrologic management approach.

California↗

USGS2010

Effects of selected low-impact-development (LID) techniques on water quality and quantity in the Ipswich River Basin, Massachusetts: Field and modeling studies

During the months of August and September, flows in the Ipswich River, Massachusetts, dramatically decrease largely due to groundwater withdrawals needed to meet increased residential and commercial water demands. In the summer, rates of groundwater recharge are lower than during the rest of the year, and water demands are higher. From 2005 to 2008, the U.S. Geological Survey, in a cooperative funding agreement with the Massachusetts Department of Conservation and Recreation, monitored small-scale installations of low-impact-development (LID) enhancements designed to diminish the effects of storm runoff on the quantity and quality of surface water and groundwater. Funding for the studies also was contributed by the U.S. Environmental Protection Agency’s Targeted Watersheds Grant Program through a financial assistance agreement with Massachusetts Department of Conservation and Recreation. The monitoring studies examined the effects of (1) replacing an impervious parking lot surface with a porous surface on groundwater quality, (2) installing rain gardens and porous pavement in a neighborhood of 3 acres on the quantity and quality of stormwater runoff, and (3) installing a 3,000-square foot (ft2) green roof on the quantity and quality of stormwater runoff. In addition, the effects of broad-scale implementation of LID techniques, reduced water withdrawals, and water-conservation measures on streamflow in large areas of the basin were simulated using the U.S. Geological Survey’s Ipswich River Basin model. From June 2005 to 2007, groundwater quality was monitored at the Silver Lake town beach parking lot in Wilmington, MA, prior to and following the replacement of the conventional, impervious-asphalt surface with a porous surface consisting primarily of porous asphalt and porous pavers. Changes in the concentrations of the water-quality constituents, phosphorus, nitrogen, cadmium, chromium, copper, lead, nickel, zinc, and total petroleum hydrocarbons, were monitored. Increased infiltration of precipitation did not result in discernible increases in concentrations of these potential groundwater contaminants. Concentrations of dissolved oxygen increased slightly in groundwater profiles following the removal of the impervious asphalt parking lot surface. In Wilmington, MA, in a 3-acre neighborhood, stormwater runoff volume and quality were monitored to determine the ability of selected LID enhancements (rain gardens and porous paving stones) to reduce flows and loads of the above constituents to Silver Lake. Flow-proportional water-quality samples were analyzed for nutrients, metals, total petroleum hydrocarbons, and total-coliform and Escherichia coli bacteria. In general, when all storms were considered, no substantial decreases were observed in runoff volume as a result of installing LID enhancements. However, the relation between rainfall and runoff did provide some insight into how the LID enhancements affected the effective impervious area for the neighborhood. A decrease in runoff was observed for storms of 0.2 inches (in.) or less of precipitation, which indicated a reduction in effective impervious area from approximately 10 percent to about 4.5 percent for the 3-acre area. Water-quality-monitoring results were inconclusive; there were no statistically significant differences in concentrations or loads when the pre- and post-installation-period samples were compared. Three factors were probably most important in minimizing differences: (1) the small decrease in effective impervious area, (2) the differences in the size of storms sampled for water-quality constituents before and after installation of the infiltration enhancing measures, and (3) small sample sizes. In a third field study, the characteristics of runoff from a vegetated “green” roof and a conventional, rubber-membrane roof were compared. The amount of precipitation and the length of the antecedent dry period were the two primary factors affecting the green roof’s water-storage capacity. The green roof retained more than 50 percent of the precipitation from storms with 0.04 to 1.0 in. of rain. Approximately 95 percent of the precipitation from one storm of nearly 2 in. was retained by the green roof. On the rubber-membrane roof, only a small, shallow puddle of insubstantial volume ever remained after a storm. Bulk precipitation from 10 storms was monitored for the same constituents (nutrients, metals, and total petroleum hydrocarbons) as the roof runoff, and the results were compared with those for roof-runoff samples. The use of fertilizers to help establish the vegetation during the study probably distorted any effect the plants and growing medium may have had on the retention of target analytes. As a result of the fertilizer and growing medium chemistry, median concentrations of total nitrogen, total phosphorus, cadmium, copper, and nickel in runoff from the green roof were greater than in the runoff from the conventional roof or in bulk precipitation. Concentrations of lead and zinc were greater in runoff from the conventional roof, probably a result of passage through the old, metal drainpipes. Simulations of the effects of LID on streamflow in the Ipswich River Basin were conducted with a previously calibrated Hydrological Simulation Program-FORTRAN (HSPF) precipitation-runoff model. Simulations were conducted at multiple spatial scales to evaluate the effects of (1) updated water withdrawals for the towns of Reading and Wilmington; (2) potential land-use changes at buildout (potential future development); (3) effective impervious area reductions upstream from the South Middleton streamgage to represent the effects of widespread implementation of LID retrofit techniques; (4) basin-scale water withdrawal reductions scaled up (expanded to the town level) from water-conservation pilot programs conducted by the Massachusetts Department of Conservation and Recreation; and (5) land-use change and LID techniques at a local scale, which is smaller than the HSPF subbasin. Effects on streamflow generally were evaluated by comparing results of two or more related simulations for selected reaches in the basin; thus, relative rather than absolute changes in simulated flow were the focus of the assessment. Simulations indicated that reduced withdrawals for the towns of Reading and Wilmington led to substantially higher medium and low flows in most of the reaches upstream from the South Middleton streamgage. Simulations of water-conservation measures resulted in negligible effects on streamflow. Overall, simulations indicated that spatial scale is an important factor in determining the effects of land-use change and LID practices on streamflow. Potential land-use changes at buildout had modest (percent differences of less than 20 percent) effects on streamflow in most subbasins because relatively little land in the basin was available for development (about 17 percent); moreover, most of the available open land is zoned for low-density residential development, and this land-use category was simulated to contain relatively little effective impervious area and to be similar hydrologically to the forested land in place prior to development. Results of the simulations conducted to evaluate widespread effective impervious area reductions upstream from the South Middleton streamgage indicated that the percentage of urban land use and associated effective impervious area was too small for a 50-percent reduction of effective impervious area to appreciably affect streamflow (percent differences of less than 20 percent) in most subbasins. In contrast, the results of the hypothetical local-scale simulations indicated that for smaller streams, where the percentage of urban land use and associated effective impervious area in the drainage area may be substantially higher, land-use change, development patterns, and LID practices potentially have much greater effects on streamflow. Modeling results also indicated that LID was potentially most beneficial for minimizing streamflow alteration when applied to dense urban development, largely because larger tracts of effective impervious area were available for reduction than were available for other land-use categories. For example, commercial-industrial-transportation land use is composed of 37 percent pervious area and 63 percent effective impervious area in the HSPF model, whereas low-density residential area is composed of 97.5 percent pervious area and only 2.5 percent effective impervious area. Field and modeling studies concurred in the assessment that LID enhancements would likely have the greatest effect on decreasing stormwater runoff when broadly applied to highly impervious urban areas. A measurable effect for small rainfall events (less than 0.25 inch) was determined in the small, highly pervious area that was monitored in this study, but the volume difference was not great.

Massachusetts↗