Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Basin Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31Linked to original sources
USGS2012

Comparison of Vibroseis and explosive source methods for deep crustal seismic reflection profiling in the Basin and Range province

Direct comparison of low-fold, high-energy explosive and high-fold, lower-energy Vibroseis methods for acquiring deep crustal seismic reflection data in the Basin and Range Province suggests that the high-fold common midpoint (CMP) method there does not provide the best possible image of lower crustal structure. During the recent acquisition of a Vibroseis profile in the Basin and Range Province we fired single deep shot holes to obtain a coincident single-fold explosive section. Within the upper crust (upper 3 s) the explosive source and Vibroseis records are nearly equivalent. For record times below 3 s, however, comparison of the explosive source gathers and the coincident final 60-fold Vibroseis section demonstrates that low-fold explosive profiling provides a higher-quality image of the midcrust to lower crust (3–10 s). The higher record quality of the explosive sources results primarily from the larger seismic energy levels produced by the explosives, making them less sensitive to common noise sources. Whereas deeper than 4–5 s the Vibroseis energy levels on individual source efforts fall to that of ambient noise levels, the explosions provide signal-generated energy exceeding ambient noise levels down to 18–19 s. Although individual reflections can be correlated on explosion and Vibroseis shot gathers, reflection events on the 60-fold Vibroseis stack do not correlate to those on the single-fold explosion profile, suggesting that the high-fold CMP method in our study did not maintain the integrity of the weak lower crustal reflected arrivals. Reasons why the high-fold CMP method apparently failed include complex, even time-varying, statics, nonhyperbolic moveout at long offsets, and the difficulty in resolving stacking velocities with data having low signal-to-noise ratios. Reflections on the explosion section are longer and imply a greater degree of layering than one would infer from the lower-energy Vibroseis section.

Journal of Geophysical Research↗
USGS1996

Thermal and unroofing history of a thick, tilted Basin-and-Range crustal section in the Tortilla Mountains, Arizona

We estimate here a geothermal gradient of only 17 ± 5°C km −1 for the tilted Grayback fault block in southeastern Arizona when extension began ∼25 Ma. This gradient is lower than preextension gradients estimated elsewhere in the Basin and Range, is only about 50% of typical gradients in the Basin and Range today, and needs to be accounted for in models of continental extension. The Grayback block exposes a 12-km-thick crustal section of Proterozoic and Cretaceous granitoids, which was tilted 90° during extension between 25 and 15 Ma. Zircon fission-track ages decrease structurally downward (westward) across the block and were all within a zone of partial track annealing prior to tilting and quenching. The zircon age gradient suggests that the 220°–240°C isotherm migrated downward 5–6 km during Paleogene erosion and regional cooling. Apatite fission-track ages decrease westward from ∼83 Ma in the structurally highest crystalline rocks to ∼24 Ma at ∼6-km paleodepth and then to ∼15 Ma another 6 km farther west. Track-length analysis confirms that apatites above the break in slope in age at ∼5.7-km paleodepth resided in a zone of partial annealing prior to tilting, and deeper apatites record rapid cooling upon tilting and unroofing beginning ∼25 Ma. At that time the 110 ± 10°C isotherm determined by the depth at which tracks in apatite were fully erased was at a basement paleodepth of ∼5.7 km, and the 220 ± 30°C isotherm as estimated from zircon data resided at a pretilting basement depth of ∼12.15 km. From consistent values of paleogeothermal gradient for two depth intervals we estimate the pretilt gradient was 17 ± 5°C km −1 . From 25 to 15 Ma the rotating Grayback block cooled rapidly as higher, westward moving blocks unroofed it tectonically at a rate of ∼1 km m.y. −1 .

Journal of Geophysical Research B: Solid Earth↗
USGS1998

Suppression of large earthquakes by stress shadows: A comparison of Coulomb and rate-and-state failure

Stress shadows generated by California's two most recent great earthquakes (1857 Fort Tejon and 1906 San Francisco) substantially modified 19th and 20th century earthquake history in the Los Angeles basin and in the San Francisco Bay area. Simple Coulomb failure calculations, which assume that earthquakes can be modeled as static dislocations in an elastic half-space, have done quite well at approximating how long the stress shadows, or relaxing effects, should last and at predicting where subsequent large earthquakes will not occur. There has, however, been at least one apparent exception to the predictions of such simple models. The 1911 M >6.0 earthquake near Morgan Hill, California, occurred at a relaxed site on the Calaveras fault. We examine how the more complex rate-and-state friction formalism based on laboratory experiments might have allowed the 1911 earthquake. Rate-and-state time-to-failure calculations are consistent with the occurrence of the 1911 event just 5 years after 1906 if the Calaveras fault was already close to failure before the effects of 1906. We also examine the likelihood that the entire 78 years of relative quiet (only four M ≥6 earthquakes) in the bay area after 1906 is consistent with rate-and-state assumptions, given that the previous 7 decades produced 18 M ≥6 earthquakes. Combinations of rate-and-state variables can be found that are consistent with this pattern of large bay area earthquakes, assuming that the rate of earthquakes in the 7 decades before 1906 would have continued had 1906 not occurred. These results demonstrate that rate-and-state offers a consistent explanation for the 78-year quiescence and the 1911 anomaly, although they do not rule out several alternate explanations.

California↗
USGS2025

Placing environmental DNA monitoring for new detections into perspective: Fishes in the Milwaukee River, Wisconsin

Invasive species management frameworks, such as the early detection of and rapid response to invasive species, use monitoring programs to detect new species occurrences. Resource managers use environmental DNA (eDNA) as one tool for these monitoring programs. An eDNA detection in a new location may lack perspective for resource managers and researchers because of the rarity of potential invaders and the randomness in their dispersal and detection. An example monitoring program is the eDNA-based sampling approach used by the U.S. Fish and Wildlife Service for bigheaded carps Hypophthalmichthys spp. in the upper Mississippi River and Great Lakes Basins that collects hundreds of water samples per event. The U.S. Fish and Wildlife Service detected a single positive sample for Bighead Carp Hypophthalmichthys nobilis during the spring 2021 sampling event in the Kinnickinnic River within the Milwaukee River Basin, and detected a second single positive sample for bigheaded carps during the fall 2021 sampling event in the Milwaukee River. The U.S. Fish and Wildlife Service did not detect any bigheaded carps in previous years (2015 to 2020) or in either the spring or fall 2022 sampling events. These detections lacked perspective, such as detection numbers for other species. We reanalyzed the 2021 and 2022 samples for four existing species of fish: two fairly common species (Common Carp Cyprinus carpio and Gizzard Shad Dorosoma cepedianum ) and two fairly rare species (Burbot Lota lota and Grass Carp Ctenopharyngodon idella ). We detected Common Carp during all four sampling events, Gizzard Shad during three of four sampling events, and Burbot and Grass Carp during two of four sampling events. These results demonstrated that current sampling efforts could detect other species, and bigheaded carp eDNA was not common in the Milwaukee River compared to these species. More specifically, this finding indicates bigheaded carp eDNA detections are as rare as, or rarer than, Grass Carp eDNA detections, a recent invader to the basin. Our findings also demonstrated how reanalyzing eDNA samples after positive detections for targeted species can help managers understand the context of the detections and provide perspective for the relative abundance of the targeted species. Additionally, our results highlight the importance of completing long-term eDNA-based monitoring rather than a single sampling or inventory event. These detections may have been missed in a single year or sampling event, whereas a multiyear monitoring program provides an opportunity to observe trends through time.

Wisconsin↗
USGS2022

Predicting physical and geomorphic habitat associated with historical lake whitefish and cisco spawning locations in Lakes Erie and Ontario

The Great Lakes basin was historically populated by multiple, coevolved coregonine species, but much of that diversity has been lost. In Lakes Erie and Ontario, both lake whitefish ( Coregonus clupeaformis ) and cisco ( Coregonus artedi ) occurred in high numbers before habitat degradation, overfishing, invasive species, and other factors caused significant declines. There is growing interest in restoring these populations, and suggested actions include restoration of critical habitats such as spawning habitat. Unfortunately, our current understanding of lake whitefish and cisco spawning habitat characteristics and locations in these lakes is limited. To highlight areas of potential importance for conservation and restoration, we used random forest models and data on historical spawning locations to predict lake whitefish and cisco spawning habitats based on hypothesized key factors including wind fetch, ice cover duration, distance from 1st and 6th order tributaries, and lake bottom substrate. Our model accurately predicted spawning habitat locations for 71% and 54% of cases for lake whitefish and cisco, respectively. Fetch was the most important variable in the lake whitefish model, with spawning habitats being most likely to occur in regions of low to moderate fetch. Cisco spawning habitats were most likely to occur in areas of relatively low fetch near a 1st order stream. We used these models to predict spawning habitat locations for both species across Lakes Erie, Ontario, and St. Clair. Our results improve our understanding of lake whitefish and cisco spawning habitat characteristics and will aid in the spatial prioritization of actions to restore these native fishes.

Lake Erie, Lake Ontario↗
USGS2024

Reproduction of grass carp (Ctenopharyngodon idella) in the Maumee River, Ohio: Part 1—Spawning area identification using bidirectional drift modeling

Control of invasive grass carp ( Ctenopharyngodon idella ) populations in the Western Lake Erie Basin merits adaptive management guided by the best available science. Presently (2024), capture of mature grass carp in rivers during spawning season is most efficient, so knowing when and where grass carp are spawning is essential information for natural resource agencies. Using bidirectional drift modeling and grass carp ichthyoplankton samples captured in the Maumee River during the 2017–2019 spawning seasons, this study identified 12 probable grass carp spawning areas in the lower 96.5-kilometers of the Maumee River. These spawning areas were located both above and below the Grand Rapids/Providence low-head dams. Three areas showed evidence of multiyear use, while nine had multi-event use. Spawning activity had no definitive diel variation and occurred at an average photoperiod of 15.15 h. The maturation metric ADD15, or annual degree days above 15 degrees Celsius, generally exceeded the 655 threshold for spawning; however, some spawning occurred when ADD15 ≤235, indicating spawners likely matured in a warmwater discharge. The probable spawning areas were generally characterized by mean velocities between 0.4 and 2.1 m per second (with locally higher velocities possible), areas of high turbulence produced by dam spillways or bedrock outcroppings, channel constrictions, confluences, islands, and bridges with piers in the water. Spawning suitability indices (SSI), based on velocity, varied considerably between spawning areas and SSI models. These results could be used to inform control efforts and predict potential grass carp spawning locations in other rivers under threat of invasion.

Ohio↗
USGS2012

Rift flank uplifts and Hinterland Basins: Comparison of the Transantarctic Mountains with the Great Escarpment of southern Africa

Uplifted rift margins are a common feature of continents and oceans. Two variants of rift flank morphologies have been recognized: One in which the topography warps down from an inland high toward the continental margin, and one where the tropographic peak lies close to the continental margin. The Great Escarpment of southern Africa and the Transantarctic Mountains are examples of the first and the second variants of rift flanks, respectively. Both rift flanks are bordered on their landward side by broad continental basins: the Kalahari and the Wilkes hinterland basins. If these basins are interpreted as flexural “outer lows” that deepen in unison with the uplift of the rift flanks, the lithosphere on the uplifted side is very rigid in both cases (elastic thickness T e of 100 ± 20 km for southern Africa and 110 ± 20 km for East Antarctica). We suggest that the variation in rift flank morphology is caused by the isostatic response to uplift forces of elastic plates sharing different boundary conditions. We model the uplift of the Transantarctic Mountains as an upward deflection of an elastic plate which is broken at the front of the Transantarctic Mountains, and we model the uplift of the Great Escarpment as an upward deflection of a continuous elastic plate that is modified by the downward load of sediments on the continental margin. Although the Transantarctic Mountain uplift is young (60–0 Ma) and the southern African uplift is old (<100 Ma), the different isostatic responses of the two margins are not a function of age, because most loading (sedimentation) and unloading (erosion) took place shortly after rifting. Detailed modeling of topography, gravity, geological markers, and the locations of depocenters suggests that lithospheric rigidity decreases under the Transantarctic Mountains, whereas in southern Africa the decrease occurs not under the Great Escarpment but far seaward under the continental shelf and slope. If the distribution of lithospheric rigidity is indicative of the thermal regime of the lithosphere, then uplifted rift flanks are not always underlain by a thermal anomaly. This and other geological evidence indicate that a single mechanism cannot explain the uplift of both the Antarctic and the African margins.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Bedrock geology and tectonic evolution of the Wrangellia, Peninsular, and Chugach terranes along the Trans-Alaska Crustal Transect in the Chugach Mountains and southern Copper River Basin, Alaska

The Trans-Alaskan Crustal Transect in the southern Copper River Basin and Chugach Mountains traverses the margins of the Peninsular and Wrangellia terranes, and the adjacent accretionary oceanic units of the Chugach terrane to the south. The southern Wrangellia terrane margin consists of a polymetamorphosed magmatic arc complex at least in part of Pennsylvanian age (Strelna Metamorphics and metagranodiorite) and tonalitic metaplutonic rocks of the Late Jurassic Chitina magmatic arc. The southern Peninsular terrane margin is underlain by rocks of the Late Triassic (?) and Early Jurassic Talkeetna magmatic arc (Talkeetna Formation and Border Ranges ultra-mafic-mafic assemblage) on Permian or older basement rocks. The Peninsular and Wrangellia terranes are parts of a dominantly oceanic superterrane (composite Terrane II) that was amalgamated by Late Triassic time and was accreted to terranes of continental affinity north of the Denali fault system in the mid- to Late Cretaceous. The Chugach terrane in the transect area consists of three successively accreted units: (1) minor greenschist and intercalated blueschist, the schist of Liberty Creek, of unknown protolith age that was metamorphosed and probably accreted during the Early Jurassic, (2) the McHugh Complex (Late Triassic to mid-Cretaceous protolith age), a melange of mixed oceanic, volcaniclastic, and olistostromal rocks that is metamorphosed to prehnite-pumpellyite and lower greenschist facies that was accreted by middle Cretaceous time, and (3) the Upper Cretaceous Valdez Group, mainly magmatic arc-derived flysch and lesser oceanic volcanic rocks of greenschist facies that was accreted by early Paleocene time. A regional thermal event that culminated in early middle Eocene time (48–52 Ma) resulted in widespread greenschist facies metamorphism and plutonism.

Journal of Geophysical Research Solid Earth↗
USGS2021

Towards improving an Area of Concern: Main-channel habitat rehabilitation priorities for the Maumee River

The Maumee River watershed in the Laurentian Great Lakes Basin has been impacted by decades of pollution and habitat modification due to human settlement and development. As such, the lower 35 km of the Maumee River and several smaller adjacent watersheds comprising over 2000 km 2 were designated the Maumee Area of Concern (AOC) under the revised Great Lakes Water Quality Agreement in 1987. As part of pre-rehabilitation assessments in the Maumee AOC, we assessed fish and invertebrate communities in river km 24–11 of the Maumee River to identify: 1) areas that exhibit the highest biodiversity, 2) habitat characteristics associated with high biodiversity areas, 3) areas in need of protection from further degradation, and 4) areas that could feasibly be rehabilitated to increase biodiversity. Based on benthic trawl data, shallow water habitats surrounding large island complexes had the highest fish diversity and catch per unit effort (CPUE). Electrofishing displayed similar fish diversity and CPUE patterns across habitat types early in the study but yielded no discernable fish diversity or CPUE patterns towards the end of our study. Although highly variable among study sites, macroinvertebrate density was greatest in shallow water habitats <2.5 m and around large island complexes. Our results provide valuable baseline data that could act as a foundation for developing rehabilitation strategies in the lower Maumee River and for assessing the effectiveness of future aquatic habitat rehabilitation projects. In addition to increasing in-channel habitat, watershed-scale improvements of water quality might be necessary to ensure rehabilitation strategies are successful.

Ohio↗
USGS2023

Coproduction and modeling spatial contact networks prevent bias about infectious hematopoietic necrosis virus transmission for Snake River Basin salmonids

Much remains unknown about variation in pathogen transmission across the geographic range of a free-ranging fish or animal species and about the influence of movement (associated with husbandry practices or animal behavior) on pathogen transmission. Salmonid hatcheries are an ideal system in which to study these processes. Salmonid hatcheries are managed for endangered species recovery, supplementation of threatened or at-risk fish stocks, support of fisheries, and ecosystem stability. Infectious hematopoietic necrosis virus (IHNV) is a rhabdovirus of significant concern to salmon aquaculture. Landscape IHNV transmission dynamics previously had been estimated only for salmonid hatcheries in the Lower Columbia River Basin (LCRB). The objectives of this study were to estimate IHNV transmission dynamics in a unique geographic region, the Snake River Basin (SRB), and to quantitatively estimate the effect of model coproduction on inference because previous assessments of coproduction have been qualitative. In contrast to the LCRB, the SRB has hatchery complexes consisting of a main hatchery and ≥1 satellite facility. Knowledge about hatchery complexes was held by a subset of project researchers but would not have been available to project modelers without coproduction. Project modelers generated and tested multiple versions of Bayesian susceptible-exposedinfected models to realistically represent the SRB and estimate the effect of coproduction. Models estimated the frequency of transmission routes, route-specific infection probabilities, and infection probabilities for combinations of salmonid hosts and IHNV lineages. Model results indicated that in the SRB, avoiding exposure to IHNV-positive adult salmonids is the most important action to prevent juvenile infections. Migrating adult salmonids exposed juvenile cohort-sites most frequently, and the infection probability was greatest following exposure to migrating adults. Without coproduction, the frequency of exposure by migrating adults would have been overestimated by 70 cohort-sites, and the infection probability following exposure to migrating adults would have been underestimated by∼0.09. The coproduced model had less uncertainty in the infection probability if no transmission route could be identified (Bayesian credible interval (BCI) width = 0.12) compared to the model without coproduction (BCI width = 0.34). Evidence for virus lineage MD specialization on steelhead and rainbow trout (both Oncorhynchus mykiss) was apparent without model coproduction. In the SRB, we found a greater probability of virus lineage UC infection in Chinook salmon (Oncorhynchus tshawytscha) compared to in O. mykiss, whereas in the LCRB, UC more clearly exhibited a generalist approach. Coproduction influenced estimates that depended on transmission routes, which operated differently at main hatcheries and satellite sites within hatchery complexes. Hatchery complexes are found outside of the SRB and are not specific to salmonid hatcheries alone. There is great potential for coproduction and modeling spatial contact networks to advance understanding about infectious disease transmission in complex production systems and surrounding free-ranging animal populations.

Idaho, Oregon, Washington↗
USGS2012

Seismic refraction measurements within the Peninsular terrane, south central Alaska

We present an interpretation of crustal seismic refraction data from the Peninsular terrane, one of the many exotic terranes that have been accreted to the continental margin of southern Alaska in the past 200 m.y. A seismic refraction line was collected along the Glenn Highway in the Copper River Basin of south central Alaska in 1984 and 1985, as part of the U.S. Geological Survey Trans‐Alaska Crustal Transect (TACT) program. P wave velocities of 2.7–3.5 km/s and thicknesses of 1–2 km characterize post‐Lower Jurassic sedimentary rocks that underlie most of the seismic refraction line. An average crustal velocity structure includes the following five velocity divisions. Beneath the sedimentary rocks lie 1–2 km of 4.0–4.6 km/s materials, correlating with andesitic volcaniclastic sedimentary rocks and lava flows of the Lower Jurassic Talkeetna Formation. Below these rocks, seismic velocity increases rapidly, from 5.0 to 6.1 km/s, in 2–3 km. At 7–8 km depth, velocity jumps to 6.3 km/s and increments to 6.6 km/s by 10–12 km depth. Velocities increase from 6.8 to 7.0 km/s between 12 to 20 km depth. At about 22 km depth, a jump in velocity from 7.0 to 7.4 km/s is inferred but is poorly resolved. Depth to the Moho discontinuity could not be determined from our data. The absence of clear PmP reflections may indicate that Moho is deeper than 40 km. Data from two offset shotpoints northeast of the line and within the Wrangellia terrane constrain the deep structure transition between Peninsular and Wrangellia terranes. The 6.3–6.6 km/s material thickens to the northeast, toward the suture between Peninsular and Wrangellia terranes, but southwest of its mapped trace at the West Fork fault. Peninsular terrane crustal structure appears dissimilar to that of continental interiors. It is similar to velocity structures determined for accreted island arc fragments in California, such as the basement of the Great Valley and the Klamath Mountains.

Alaska↗
USGS1997

Crustal structure along the west flank of the Cascades, western Washington

Knowledge of the crustal structure of the Washington Cascades and adjacent Puget Lowland is important to both earthquake hazards studies and geologic studies of the evolution of this tectonically active region. We present a model for crustal velocity structure derived from analysis of seismic refraction/wide-angle reflection data collected in 1991 in western Washington. The 280-km-long north-south transect skirts the west flank of the Cascades as it crosses three tectonic provinces including the Northwest Cascades Thrust System (NWCS), the Puget Lowland, and the volcanic arc of the southern Cascades. Within the NWCS, upper crustal velocities range from 4.2 to 5.7 km s-1 and are consistent with the presence of a diverse suite of Mesozoic and Paleozoic metasediments and metavolcanics. In the upper 2-3 km of the Puget Lowland velocities drop to 1.7-3.5 km s-1 and reflect the occurrence of Oligocene to recent sediments within the basin. In the southern Washington Cascades, upper crustal velocities range from 4.0 to 5.5 km s-1 and are consistent with a large volume of Tertiary sediments and volcanics. A sharp change in velocity gradient at 5-10 km marks the division between the upper and middle crust. From approximately 10 to 35 km depth the velocity field is characterized by a velocity increase from ???6.0 to 7.2 km s-1. These high velocities do not support the presence of marine sedimentary rocks at depths of 10-20 km beneath the Cascades as previously proposed on the basis of magnetotelluric data. Crustal thickness ranges from 42 to 47 km along the profile. The lowermost crust consists of a 2 to 8-km-thick transitional layer with velocities of 7.3-7.4 km s-1. The upper mantle velocity appears to be an unusually low 7.6-7.8 km s-1. When compared to velocity models from other regions, this model most closely resembles those found in active continental arcs. Distinct seismicity patterns can be associated with individual tectonic provinces along the seismic transect. In the NWCS and Puget Lowland, most of the seismicity occurs below the base of the upper crust as defined by a seismic boundary at 5-10 km depth and continues to 20-30 km depth. The region of transition between the NWCS and the Puget Lowland appears as a gap in seismicity with notably less seismic activity north of the boundary between the two. Earthquakes within the Cascades are generally shallower (0-20 km) and are dominated by events associated with the Rainier Seismic Zone.

Washington↗
USGS2016

Illuminating wildfire erosion and deposition patterns with repeat terrestrial lidar

Erosion following a wildfire is much greater than background erosion in forests because of wildfire-induced changes to soil erodibility and water infiltration. While many previous studies have documented post-wildfire erosion with point and small plot-scale measurements, the spatial distribution of post-fire erosion patterns at the watershed scale remains largely unexplored. In this study lidar surveys were collected periodically in a small, first-order drainage basin over a period of 2 years following a wildfire. The study site was relatively steep with slopes ranging from 17° to > 30°. During the study period, several different types of rain storms occurred on the site including low-intensity frontal storms (2.4 mm h −1 ) and high-intensity convective thunderstorms (79 mm h −1 ). These storms were the dominant drivers of erosion. Erosion resulting from dry ravel and debris flows was notably absent at the site. Successive lidar surveys were subtracted from one another to obtain digital maps of topographic change between surveys. The results show an evolution in geomorphic response, such that the erosional response after rain storms was strongly influenced by the previous erosional events and pre-fire site morphology. Hillslope and channel roughness increased over time, and the watershed armored as coarse cobbles and boulders were exposed. The erosional response was spatially nonuniform; shallow erosion from hillslopes (87% of the study area) contributed 3 times more sediment volume than erosion from convergent areas (13% of the study area). However, the total normalized erosion depth (volume/area) was highest in convergent areas. From a detailed understanding of the spatial locations of erosion, we made inferences regarding the processes driving erosion. It appears that hillslope erosion is controlled by rain splash (for detachment) and overland flow (for transport and quasi-channelized erosion), with the sites of highest erosion corresponding to locations with the lowest roughness. By contrast, in convergent areas we found erosion caused by overland flow. Soil erosion was locally interrupted by immobile objects such as boulders, bedrock, or tree trunks, resulting in a patchy erosion network with increasing roughness over time.

Colorado↗
USGS2008

Hydrothermal origin of halogens at Home Plate, Gusev Crater

In the Inner Basin of the Columbia Hills, Gusev Crater is Home Plate, an 80 m platform of layered elastic rocks of the Barnhill class with microscopic and macroscopic textures, including a bomb sag, suggestive of a phreatomagmatic origin. We present data acquired by the Spirit Mars Exploration Rover by Alpha Particle X-Ray Spectrometer (APXS), Mo??ssbauer Spectrometer, Miniature Thermal Emission Spectrometer (Mini-TES), and Panoramic Camera (Pancam) for the Barnhill class rocks and nearby vesicular Irvine class basalts. In major element concentrations (e.g., SiO2, Al2O3, MgO, and FeO*), the two rock classes are similar, suggesting that they are derived from a similar magmatic source. The Barnhill class, however, has higher abundances of Cl, Br, Zn, and Ge with comparable SO3 to the Irvine basalts. Nanophase ferric oxide (np ox) and volcanic glass were detected in the Barnhill class rocks by Mo??ssbauer and Mini-TES, respectively, and imply greater alteration and cooling rates in the Barnhill than in the Irvine class rocks. The high volatile elements in the Barnhill class agree with volcanic textures that imply interaction with a briny groundwater during eruption and (or) by later alteration. Differences in composition between the Barnhill and Irvine classes allow the fingerprinting of a Na-Mg-Zn-Ge-Cl-Br (??Fe ?? Ca ?? CO2) brine with low S. Nearby sulfate salt soils of fumarolic origin may reflect fractionation of an acidic S-rich vapor during boiling of a hydrothermal brine at depth. Persistent groundwater was likely present during and after the formation of Home Plate. Copyright 2008 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗
USGS2012

Geophysical constraints on Washington convergent margin structure

Gravity and magnetic maps of western Washington reveal the lateral structure and fabric of the Washington Coast Range, Puget Basin, and southern Washington Cascade Range. The magnetic and gravity maps show large amplitude positive anomalies associated with the shallow but largely buried section of Washington Coast Range mafic rocks which are separated by negative anomalies over deep sedimentary basins. The positive anomalies indicate that the Coast Range mafic basement extends farther east than previously thought, at least as far east as the longitude of Seattle. Linear and steep gravity and magnetic gradients indicate many unmapped, often buried faults in the Washington Coast Range Province. Magnetic highs are also associated with mapped batholiths in the Cascade arc. Several magnetic highs observed east of the Coast Range rocks and west of these batholiths may be associated with buried Tertiary plutons or ophiolites. Two-dimensional gravity and magnetic modeling constrained with geological and other geophysical data indicate that the Coast Range Province rocks are about 1 km thick at the coast, thickening to as much as 30 km near their postulated eastern edge. A maximum boundary on the average density of the upper 15–20 km of the rocks that compose the Coast Range Province of 2920 kg/m 3 was established by the modeling, suggesting a composition largely of basalt and gabbro with little interbedded sediments. Under these rocks may be mantle or a subduction complex composed of dense mafic, ultramafic, and sedimentary rocks like that proposed to underlie Vancouver Island. Previous gravity models of the Washington margin include lower densities for the proposed subduction complex than for Vancouver Island, suggesting a lower component of mafic and ultramafic rocks than the rocks underlying Vancouver Island. However, my Washington model requires that the proposed subduction complex be more dense than the trench sediments and, therefore, that material denser than sediments be incorporated within it. The absence of continental mantle and the modeled wedge shape of the Coast Range Province upper crust suggest that erosion of the bottom of the overriding plate by subduction processes may have occurred.

Washington↗
USGS1977

Phytoplankton distribution and primary productivity in Donner Lake, California

Donner Lake is an unenriched system in the Lake Tahoe basin of the Sierra Nevada of California. The lake has a surface area of 1.5 square miles (3.9 square kilometres) and a drainage area of 14 mi 2 (36 km 2 ). The maximum depth is about 200 feet (60 metres). Between May and December 1973, the phytoplankton in Donner Lake was represented by 6 classes and at least 25 genera. The dominant green alga was the desmid Cosmarium staurastroides , which comprised about 25 percent of the total phytoplankton collected. The dominant diatom was Asterionella formosa , which comprised about 13 percent of the total phytoplankton. Blue-green algae were represented by Chroococcus sp., but were never abundant and constituted only 1.5 percent of the total organisms sampled. The depth of the euphotic zone from May through September ranged from 35 to 93 feet (11 to 28 metres). Thermal stratification was strong throughout the summer with a maximum temperature difference between the surface and bottom water of 17° Celsius in July. Average phytoplankton concentrations were often greater below the euphotic zone than in the euphotic zone. This pattern of phytoplankton distribution is similar to nearby Lake Tahoe and other oligotrophic lakes. Three primary productivity measurements were made during the study using the carbon-14 method. The primary productivity values were 93, 64, and 56 milligrams of carbon per cubic metre per day for May 17, August 13, and October 16, respectively. The productivity profile in May was shallow and unimodal, whereas the August and October profiles were deeper and biomodal. Dissolved-oxygen concentrations were maximum at the same depths as maximum primary productivity. On the basis of phytoplankton types and their vertical distribution patterns, and upon primary productivity measurements, Donner Lake is considered oligotrophic.

California↗
USGS2024

Novel insights about petroleum systems from source and reservoir rock characterization, Cretaceous Deposits, Babouri-Figuil Basin, Northern Cameroon

The Babouri-Figuil Basin (BFB) is a frontier basin for petroleum in Cameroon. It belongs to the series of Cretaceous rift basins of the West and Central Rift System (WCARS), the origin of which is related to the opening of the South Atlantic. Within the same rift system, commercial hydrocarbon accumulations have been discovered in Chad, Sudan, Niger and, more recently, in Nigeria (Gongola Basin). The study of the geology of the BFB just recently received considerable attention, mainly because of its presumed hydrocarbon potential. In the pursuit of researching possible petroleum systems in the BFB, the current study provides a first look into the characterization of source and reservoir rock and its integration into a 2D lithostratigraphic model. The study was solely based on outcrop samples. Black shale and massive claystone are good to excellent hydrocarbon source rocks [e.g., up to 38 wt% total organic carbon (TOC), up to 943 mg/g hydrogen index, up to 85 m thickness, up to 20–30 km lateral extension], with moderate to high values of extractable organic matter (e.g., >10,000 ppm). Calcareous claystone, on the other hand, are poor source rocks [e.g., <0.20 wt% TOC]. The samples are thermally immature, except for those located close to volcanic intrusion at Golombe that have reached the threshold for oil generation (Tmax >435 °C, production index >0.1). The petrographic analysis of sandstone revealed that they are fine-grained to coarse-grained, poorly to moderately sorted, texturally and compositionally immature to submature, subarkosic to arkosic arenites. The main diagenetic processes that affected sandstones are as follows: moderate to intense compaction characterized by the development of long, concavo-convex, and sutured contacts between grains; cementation through calcite, iron oxide, and quartz cements; alteration of mica and feldspar grains; partial to complete dissolution of feldspar, mica, amphibole grains, and calcite cement; and the replacement of feldspar and mica grains by clay minerals. Alteration and dissolution increase the porosity of sandstone through the creation of secondary pores. However, mechanical compaction through the development of a pseudomatrix and cementation as pore-filling materials have significantly reduced the quality of sandstone beds as conventional petroleum reservoirs. Hence, the best reservoir-quality sandstones in the basin are generally located in the upper portion of the basin in terms of its lithostratigraphic model. They are the cleanest sandstones with the smallest amount of cement and the lowest ductile grain content (pseudomatrix), with a thickness that varies from 3 m to 120 m and a lateral extension of 20 km. The lithostratigraphic model of the basin is characterized by an extensive lacustrine environment that provided a thick sequence of organic-rich formations; sand deposited as extensive reservoirs sandwiched between shale/claystone beds; the development of stratigraphic traps through lateral facies change; and the widespread deposition of lacustrine and floodplain claystone that provide regional seals. The similarities between the Babouri-Figuil Basin and proven petroleum systems in other WCARS rift basins suggest that the basin may host at least one petroleum system where actively generating source rocks are present.

Babouri-Figuil Basin↗
USGS2001

Seismic mapping of shallow fault zones in the San Gabriel Mountains from the Los Angeles Region Seismic Experiment, southern California

During the Los Angeles Region Seismic Experiment (LARSE), a reflection/refraction survey was conducted along a profile (line 1) extending from Seal Beach, California, northeastward to the Mojave Desert and crossing the Los Angeles and San Gabriel Valley basins and San Gabriel Mountains. In most shot gathers from the southern and central San Gabriel Mountains, clear secondary arrivals are seen that merge, or appear to merge, with first arrivals at three locations, including the location of the Vincent thrust fault, an exposed late Mesozoic/early Cenozoic megathrust. These secondary arrivals are interpretable as reflections in the shallow crust (<5 km depth) from a concave-upward interface that projects to the surface in the north near the Vincent thrust fault, is offset in its central part at the San Gabriel fault (an old branch of the San Andreas fault), and terminates in the south at 1 to 2 km depth at the southern mountain front. The velocity structure above and below this interface strongly suggests it is the Vincent thrust fault: intermediate velocities (6.2 km/s), consistent with mylonites overlying the Vincent thrust fault, are observed above it; lower velocities (5.8 km/s), consistent with the Pelona Schist underlying the Vincent thrust fault, are observed below it. Problems arise, however, in attempting to match this reflector to the exposed Vincent thrust fault, which is seen in outcrops east of line 1. The Vincent thrust fault is shallower than the reflector in most places. An unmapped structure (steep fault, monocline, or thrust fault) is required between line 1 and the outcrops that either drops the Vincent thrust fault down to the depths of the reflector or repeats the Vincent thrust fault beneath line 1 in the footwall of another thrust fault. An alternative interpretation of the reflector is a deep greenstone horizon within the Pelona Schist, although this alternative is not favored by the velocity structure. Copyright 2001 by the American Geophysical Union.

California↗