Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Wind Energy”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24Linked to original sources
USGS2011

Enhanced transpiration by riparian buffer trees in response to advection in a humid temperate agricultural landscape

Riparian buffers are designed as management practices to increase infiltration and reduce surface runoff and transport of sediment and nonpoint source pollutants from crop fields to adjacent streams. Achieving these ecosystem service goals depends, in part, on their ability to remove water from the soil via transpiration. In these systems, edges between crop fields and trees of the buffer systems can create advection processes, which could influence water use by trees. We conducted a field study in a riparian buffer system established in 1994 under a humid temperate climate, located in the Corn Belt region of the Midwestern U.S. (Iowa). The goals were to estimate stand level transpiration by the riparian buffer, quantify the controls on water use by the buffer system, and determine to what extent advective energy and tree position within the buffer system influence individual tree transpiration rates. We primarily focused on the water use response (determined with the Heat Ratio Method) of one of the dominant species ( Acer saccharinum ) and a subdominant ( Juglans nigra ). A few individuals of three additional species ( Quercus bicolor, Betula nigra, Platanus occidentalis ) were monitored over a shorter time period to assess the generality of responses. Meteorological stations were installed along a transect across the riparian buffer to determine the microclimate conditions. The differences found among individuals were attributed to differences in species sap velocities and sapwood depths, location relative to the forest edge and prevailing winds and canopy exposure and dominance. Sapflow rates for A. saccharinum trees growing at the SE edge (prevailing winds) were 39% greater than SE interior trees and 30% and 69% greater than NW interior and edge trees, respectively. No transpiration enhancement due to edge effect was detected in the subdominant J. nigra . The results were interpreted as indicative of advection effects from the surrounding crops. Further, significant differences were document in sapflow rates between the five study species, suggesting that selection of species is important for enhancing specific riparian buffer functions. However, more information is needed on water use patterns among diverse species growing under different climatic and biophysical conditions to assist policy and management decisions regarding effective buffer design.

Forest Ecology and Management↗
USGS2010

Effect of surficial disturbance on exchange between groundwater and surface water in nearshore margins

Low‐permeability sediments situated at or near the sediment‐water interface can influence seepage in nearshore margins, particularly where wave energy or currents are minimal. Seepage meters were used to quantify flow across the sediment‐water interface at two lakes where flow was from surface water to groundwater. Disturbance of the sediment bed substantially increased seepage through the sandy sediments of both lakes. Seepage increased by factors of 2.6 to 7.7 following bed disturbance at seven of eight measurement locations at Mirror Lake, New Hampshire, where the sediment representing the greatest restriction to flow was situated at the sediment‐water interface. Although the veneer of low‐permeability sediment was very thin and easily disturbed, accumulation on the bed surface was aided by a physical setting that minimized wind‐generated waves and current. At Lake Belle Taine, Minnesota, where pre‐disturbance downward seepage was smaller than at Mirror Lake, but hydraulic gradients were very large, disturbance of a 20 to 30 cm thick medium sand layer resulted in increases in seepage of 2 to 3 orders of magnitude. Exceptionally large seepage rates, some exceeding 25,000 cm/d, were recorded following bed disturbance. Since it is common practice to walk on the bed while installing or making seepage measurements, disruption of natural seepage rates may be a common occurrence in nearshore seepage studies. Disturbance of the bed should be avoided or minimized when utilizing seepage meters in shallow, nearshore settings, particularly where waves or currents are infrequent or minimal.

Minnesota, New Hampshire↗
USGS2007

Selected micrometeorological, soil-moisture, and evapotranspiration data at Amargosa Desert Research Site in Nye County near Beatty, Nevada, 2001-05

Selected micrometeorological and soil-moisture data were collected at the Amargosa Desert Research Site adjacent to a low-level radio-active waste and hazardous chemical waste facility near Beatty, Nevada, 2001-05. Evapotranspiration data were collected from February 2002 through the end of December 2005. Data were col-lected in support of ongoing research to improve the understanding of hydrologic and contaminant-transport processes in arid environments. Micrometeorological data include solar radiation, net radiation, air temperature, relative humidity, saturated and ambient vapor pressure, wind speed and direction, barometric pressure, precipitation, near-surface soil temperature, soil-heat flux and soil-water content. All micrometeorological data were collected using a 10-second sampling interval by data loggers that output daily and hourly mean values. Daily maximum and minimum values are based on hourly mean values. Precipitation data output includes daily and hourly totals. Selected soil-moisture profiles at depth include periodic measurements of soil volumetric water-content measurements at nine neutron-probe access tubes to depths ranging from 5.25 to 29.25 meters. Evapotranspiration data include measurement of daily evapotranspiration and 15-minute fluxes of the four principal energy budget components of latent-heat flux, sensible-heat flux, soil-heat flux, and net radiation. Other data collected and used in equations to determine evapotranspiration include temperature and water content of soil, temperature and vapor pressure of air, and covariance values. Evapotranspiration and flux estimates during 15-minute intervals were calculated at a 0.1-second execution interval using the eddy covariance method. Data files included in this report contain the complete micrometeorological, soil-moisture, and evapotranspiration field data sets. These data files are presented in tabular Excel spreadsheet format. This report highlights selected data contained in the computer generated data files using figures, tables, and brief discussions. Instrumentation used for data collection also is described. Water-content profiles are shown to demonstrate variability of water content with depth. Time-series data are plotted to illustrate temporal variations in micrometeorological, soil-water content, and evapotranspiration data.

Nevada↗
USGS2021

California deepwater investigations and groundtruthing (Cal DIG) I: Fault and shallow geohazard analysis offshore Morro Bay

The California Deepwater Investigations and Groundtruthing (Cal DIG) I project focuses on the potential seafloor hazards and impacts of alternative energy infrastructure in the outer continental shelf region offshore of south-central California. This is one of three reports covering a single study area located between Monterey and Point Conception, California in federal waters outside of the State of California three nautical mile limit and in water depths of 400 to 1500 meters. The goal of this report is to provide baseline geologic interpretations of the area for the purpose of improving regional models of shallow geologic hazards and sedimentary processes. Geophysical and geological data from this project will help to address important issues associated with marine spatial planning and potential offshore infrastructure development, such as offshore floating wind turbines. Datasets covered in this report include comprehensive high-resolution sub-bottom (multi-channel and Chirp seismic reflection profiles), seafloor (bathymetry), and sampling (piston, gravity, and vibracore) data collected in 2018-2019 during a series of seven seagoing geological and geophysical surveys. Specifically, this report outlines interpretation of subsurface geologic structure from the geophysical data, details preliminary core analysis results related to fluid, gas, and sediment transport activity, provides interpretations of the current geohazards in the area, and suggests next steps for improving interpretations of geohazard processes. Specific targets of geohazard interest in the study area are geological structures such as faults and folds, seafloor pockmarks within a large field (the Big Sur pockmark field), submarine channels, and mass wasting (slope failure) features. The vast majority of faults and other structures in the study occur within sediment and rock formations we interpret to be pre-Quaternary (older than 2.58 Myr BP), and thus we interpret that these structures are unlikely to present significant current hazard to seabed infrastructure, although we note that the numerous structures mapped in the study area may have the potential to become reactivated. Similarly, we find no new evidence of Holocene (younger than 11,650 years BP) fluid or gas advection in the Big Sur pockmark field. However, such fluid and gas hazards are currently difficult to assess, as additional analyses and sampling of existing core data is needed to better understand pockmark formation processes and potential gas accumulations we have mapped in the subsurface. Mass wasting along the eastern and western edges of the Santa Lucia Bank during earthquakes, as well as sediment transport down the Lucia Chica and San Simeon channels, are among the most significant, although still likely infrequent during the Holocene, hazards to seabed stability in the study area. Further analyses of the existing cores, including radiocarbon dating, stable isotope, and compositional analyses, are again needed to better understand the timing and sources of the numerous sand deposits found throughout the study area, which may have been transported downslope due to mass wasting and/or earthquake shaking processes.

California↗
USGS2015

California State Waters Map Series — Offshore of Bolinas, California

Introduction In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow subsurface geology. The Offshore of Bolinas map area is located in northern California, on the Pacific Coast of Marin County about 10 kilometers north of the Golden Gate. The town of Bolinas, named after a local indigenous tribe, is the largest population center along this section of coast, with a population of approximately 1,600 people. Bolinas is situated at the end of a southeast-trending terrain on the west side of the San Andreas Fault that also protects a natural harbor. The harbor lies in Bolinas Lagoon, which is separated from Bolinas Bay by a spit. The coastal lands within the Offshore of Bolinas map area lie entirely within the Point Reyes National Seashore, which limits development and allows existing ranching and farming to continue. The Offshore of Bolinas map area lies offshore of the northwest-trending Coast Ranges, which lie east of, and are roughly parallel to, the San Andreas Fault Zone. The western margin of North America is the only continental margin in the world delineated largely by transform faults such as the San Andreas Fault. The coastal geomorphology is controlled by late Pleistocene to Holocene slip along the fault. Bolinas Bay and Lagoon have formed where a regional depression along the fault zone intersects the coast. A northward bend in the San Andreas Fault to the north, combined with right-lateral movement, has caused regional extension and the formation of a sediment basin on the continental shelf in, and southeast of, Bolinas Bay. With the exception of the area adjacent to Bolinas Bay, the coast in the map area consists of high coastal bluffs and vertical sea cliffs. The uplifted headland upon which the town of Bolinas is situated is part of a larger uplifted area that includes exposed bedrock offshore. Uplift in this map area has resulted in relatively shallow depths within California’s State Waters (0 to 40 m) and, thus, little accommodation space for sediment accumulation. Sediment is found in the extensional basin southeast of Bolinas, as well as on the shelf offshore of uplifted coastal areas, where, within California’s State Waters, depths can exceed 40 m. Wave energy keeps the uplifted bedrock areas clear of sediment, and rippled sediment in the outer shelf indicates some mobility. Coastal sediment transport in the Offshore of Bolinas map area is characterized by north-to-south littoral transport of sediment that is derived mainly from ephemeral streams and local coastal erosion. Beyond California’s State Waters, canyons that incise the slope have been disconnected from coastal streams by rising sea level, which has risen about 125 m since the lowstand associated with the Last Glacial Maximum about 18,000 to 20,000 years ago. In the map area, no major submarine canyons extend up past the shelf break and into the nearshore to receive littoral drift. The coastline in the map area is characterized as high risk because of its steep cliffs and large-scale landsliding. The sand spit that separates Bolinas Lagoon from Bolinas Bay is highly developed, and its homes are at risk during storms, especially those from the south. The benthic species observed in the Offshore of Bolinas map area are natives of the cold-temperate biogeographic zone named either the “Oregonian province” or the “northern California ecoregion.” This biogeographic province is maintained by the long-term stability of the southward-flowing California Current, an eastern limb of the North Pacific subtropical gyre that flows from Oregon to Baja California. At its midpoint off central California, the California Current transports subarctic surface (0–500 m deep) waters southward, about 150 to 1,300 km from shore. Seasonal northwesterly winds that are, in part, responsible for the California Current, generate coastal upwelling. The south end of the Oregonian province is at Point Conception (about 425 km south of the map area), although its associated phylogeographic group of marine fauna may extend beyond to the area offshore of Los Angeles in southern California. The ocean off central California has seen a warming over the last 50 years that is driving an ecosystem shift from the productive subarctic regime towards a depopulated subtropical environment. Seafloor habitats in the Offshore of Bolinas map area, which lies within the Shelf (continental shelf) megahabitat, range from, in the nearshore, sandy seafloor in the southeast and significant rocky outcrops that support kelp-forest communities in the northwest to, in deeper water, rocky-reef communities. Biological productivity resulting from coastal upwelling supports populations of Sooty Shearwater Western Gull, Common Murre, Cassin’s Auklet, and many other less populous bird species. In addition, an observable recovery of Humpback and Blue Whales has occurred in the area; both species are dependent on coastal upwelling to provide nutrients. The large extent of exposed inner shelf bedrock in the northeast supports large forests of “bull kelp,” which is well adapted for high wave-energy environments. Common fish species found in the kelp beds and rocky reefs include lingcod and various species of greenling and rockfish.

California↗
USGS2023

Evaluation of hydrodynamic mixing in an afterbay reservoir

This study focused on the mixing of a solute, assumed to be conservative, introduced to one arm of an afterbay reservoir, between Keswick and Shasta Dams on the Sacramento River near Redding, California. Rhodamine water tracer (WT) dye served as the solute in a field experiment, and was introduced over 4.5 h and monitored for 4 days by sondes moored in the reservoir. The scenario was modeled numerically using the Delft3D flexible mesh (FM) hydrodynamic and mixing model, with measured inflows, outflows, water level, water temperatures, and bathymetry as input. Manning’s n "> n and horizontal eddy viscosity served as the (constant) model calibration parameters, and each was adjusted an order of magnitude below the default values to force observed and modeled dye hydrographs to match in arrival time and duration. The low friction factor was concluded to be due to a combination of low flow speeds coupled with energy dissipation inherent to the model. The model and surface drifters equipped with dual-frequency Global Navigation Satellite System equipment revealed velocities in the 1 – 5    cm / s "> 1 – 5 cm / s range in much of the domain during the experiment. Simple analytical expressions were shown to be useful for estimating distance to full cross-sectional mixing, steady-state concentrations, and time to reach them, but the numerical model is required for investigation of the approach to steady state, and at locations where flows intersect. Time to steady-state concentrations was 1.5–13 days for 10 simulations that spanned a wide range of inflow conditions. Model sensitivity tests suggest that wind and heat fluxes were not important during the field study, but simulations of a summer scenario with small inflows of cold water upstream in warm weather should consider water temperature. Both field observations and numerical model results showed inflow to one arm of the reservoir reaching full cross-sectional mixing before plunging below the water surface near the intersection of this arm with the reservoir’s main stem. Model results are being used to guide management decisions related to inflows to the reservoir from a relic mining site that is also a USEPA Superfund site.

California↗
USGS2012

Assessing the status and trend of bat populations across broad geographic regions with dynamic distribution models

Bats face unprecedented threats from habitat loss, climate change, disease, and wind power development, and populations of many species are in decline. A better ability to quantify bat population status and trend is urgently needed in order to develop effective conservation strategies. We used a Bayesian autoregressive approach to develop dynamic distribution models for Myotis lucifugus , the little brown bat, across a large portion of northwestern USA, using a four-year detection history matrix obtained from a regional monitoring program. This widespread and abundant species has experienced precipitous local population declines in northeastern USA resulting from the novel disease white-nose syndrome, and is facing likely range-wide declines. Our models were temporally dynamic and accounted for imperfect detection. Drawing on species–energy theory, we included measures of net primary productivity (NPP) and forest cover in models, predicting that M. lucifugus occurrence probabilities would covary positively along those gradients. Despite its common status, M. lucifugus was only detected during ∼50% of the surveys in occupied sample units. The overall naïve estimate for the proportion of the study region occupied by the species was 0.69, but after accounting for imperfect detection, this increased to ∼0.90. Our models provide evidence of an association between NPP and forest cover and M. lucifugus distribution, with implications for the projected effects of accelerated climate change in the region, which include net aridification as snowpack and stream flows decline. Annual turnover, the probability that an occupied sample unit was a newly occupied one, was estimated to be low (∼0.04–0.14), resulting in flat trend estimated with relatively high precision (SD = 0.04). We mapped the variation in predicted occurrence probabilities and corresponding prediction uncertainty along the productivity gradient. Our results provide a much needed baseline against which future anticipated declines in M. lucifugus occurrence can be measured. The dynamic distribution modeling approach has broad applicability to regional bat monitoring efforts now underway in several countries and we suggest ways to improve and expand our grid-based monitoring program to gain robust insights into bat population status and trend across large portions of North America.

Ecological Applications↗
USGS2015

California State Waters map series — Offshore of Scott Creek, California

Introduction In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow subsurface geology. The Offshore of Scott Creek map area is located in central California, on the Pacific Coast about 65 km south of San Francisco and 12 km northwest of Santa Cruz. The onshore part of the map area is sparsely populated; the only cultural center is Davenport, a small community with a population of less than 500. The hilly coastal area is virtually undeveloped, and a large percentage of coastal land is incorporated in open-space trusts. Agricultural land is almost entirely limited to coastal areas between the shoreline and the northwest-trending Santa Cruz Mountains, on Pleistocene alluvial fan deposits and the lowest emergent marine terrace. The Santa Cruz Mountains are part of the northwest-trending Coast Ranges that run roughly parallel to the San Andreas Fault Zone. The map area is cut by the San Gregorio Fault Zone, and it lies a few kilometers southwest of the San Andreas Fault Zone. Regional folding and uplift along the coast has been attributed to a westward bend in the San Andreas Fault Zone and also to right-lateral movement along the San Gregorio Fault Zone. The irregular coastal geomorphology of this area, which consists of low, rocky cliffs and sparse, small pocket beaches backed by low, terraced hills, is partly attributable to this ongoing deformation. The shelf in the map area is underlain by variable amounts (0 to 25 m) of upper Quaternary shelf, nearshore, and fluvial sediments deposited as sea level fluctuated in the late Pleistocene. The northernmost part of the map area is characterized by the presence of uplifted bedrock that has been linked to a local transpressional zone in the San Gregorio Fault Zone. This uplift, coupled with high wave energy, has resulted in little or no sediment cover in this area where exposures of bedrock are present at water depths of as much as 45 m. The thickest deposits of sediment lie offshore of both Davenport and the mouth of Waddell Creek. Coastal sediment transport in the map area is characterized by north-to-south littoral transport of sediment that is derived mainly from streams in the Santa Cruz Mountains and also from local coastal erosion. Shoreline-change studies indicate long-term erosion; within the region between San Francisco and Davenport, the highest long- and short-term coastal-erosion rates occur north of the map area, just north of Point Año Nuevo. During the last approximately 300 years, as much as 18 million cubic yards (14 million cubic meters) of sand-sized sediment has been eroded from the area between Año Nuevo Island and Point Año Nuevo and transported south. Once widened by this pulse of eroded sediment, beaches in the map area are now narrowing as the tail end of this mass of sand progresses farther south. The Offshore of Scott Creek map area lies within the cold-temperate biogeographic zone that is called either the “Oregonian province” or the “northern California ecoregion.” This biogeographic province is maintained by the long-term stability of the southward-flowing California Current, the eastern limb of the North Pacific subtropical gyre that flows from southern British Columbia to Baja California. At its midpoint off central California, the California Current transports subarctic surface (0–500 m deep) waters southward, about 150 to 1,300 km from shore. Seasonal northwesterly winds that are, in part, responsible for the California Current, generate coastal upwelling. The south end of the Oregonian province is at Point Conception (about 320 km south of the map area), although its associated phylogeographic group of marine fauna may extend beyond to the area offshore of Los Angeles in southern California. The ocean off of central California has experienced a warming over the last 50 years that is driving an ecosystem shift away from the productive subarctic regime towards a depopulated subtropical environment. Seafloor habitats in the Offshore of Scott Creek map area, which lie within the Shelf (continental shelf) megahabitat, range from significant rocky outcrops that support kelp-forest communities nearshore to rocky-reef communities in deeper water. Biological productivity resulting from coastal upwelling supports populations of Sooty Shearwater, Western Gull, Common Murre, Cassin’s Auklet, and many other less populous bird species. In addition, an observable recovery of Humpback and Blue Whales has occurred in the area; both species are dependent on coastal upwelling to provide nutrients. The large extent of exposed inner shelf bedrock supports large forests of “bull kelp,” which is well adapted for high-wave-energy environments. The kelp beds are the northernmost known habitat for the population of southern sea otters. Common fish species found in the kelp beds and rocky reefs include lingcod and various species of rockfish and greenling.

California↗
USGS2015

California State Waters map series — Offshore of Pigeon Point, California

Introduction In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow subsurface geology. The Offshore of Pigeon Point map area is located in central California, on the Pacific Coast about 50 km south of San Francisco and 25 km northwest of Santa Cruz. The onshore part of the map area is sparsely populated. The nearest significant onshore cultural center is Pescadero, an unincorporated community with a population of well under 1,000. The hilly coastal area is virtually undeveloped, used primarily for agricultural or as grazing land for sheep and cattle. Agriculture is limited to the coastal uplifted Pleistocene marine terraces and upper Pleistocene alluvial fan deposits, which lie between the shoreline and the northwest-trending Santa Cruz Mountains. The map area is cut by the San Gregorio Fault Zone, and is located a few kilometers southwest of the San Andreas Fault Zone. Coastal uplift and folding in the map area has been attributed to a westward bend in the San Andreas Fault Zone and also to right-lateral movement along the San Gregorio Fault Zone. The irregular coastal geomorphology of this area, which consists of low, rocky cliffs and sparse, small pocket beaches backed by low, terraced hills, is partly attributable to this ongoing deformation. The shelf in the map area is underlain by variable amounts (0 to 20 m) of upper Quaternary nearshore and shelf sediments deposited as sea level fluctuated in the late Pleistocene. The southern part of the map is characterized by the presence of uplifted bedrock that has been linked to a local zone of transpression in the San Gregorio Fault Zone. This uplift, coupled with high wave energy, has resulted in little or no sediment cover in this area where exposures of bedrock are present at water depths of as much as 45 m. The thickest deposits of sediment are located in the northern part of the map area. Coastal sediment transport in the map area is characterized by north-to-south littoral transport of sediment that is derived mainly from streams in the Santa Cruz Mountains and also from local coastal erosion. Shoreline-change studies indicate long-term erosion; within the region between San Francisco and Davenport, the highest long- and short-term coastal-erosion rates occur in the map area, just north of Point Año Nuevo. During the last approximately 300 years, as much as 18 million cubic yards (14 million cubic meters) of sand-sized sediment has been eroded from the area between Año Nuevo Island and Point Año Nuevo and transported south. Once widened by this pulse of eroded sediment, beaches south of Point Año Nuevo are now narrowing as the tail end of this mass of sand progresses farther south. The Offshore of Pigeon Point map area lies within the cold-temperate biogeographic zone that is called either the “Oregonian province” or the “northern California ecoregion.” This biogeographic province is maintained by the long-term stability of the southward-flowing California Current, the eastern limb of the North Pacific subtropical gyre that flows from southern British Columbia to Baja California. At its midpoint off central California, the California Current transports subarctic surface (0–500 m deep) waters southward, about 150 to 1,300 km from shore. Seasonal northwesterly winds that are, in part, responsible for the California Current, generate coastal upwelling. The south end of the Oregonian province is at Point Conception (about 335 km south of the map area), although its associated phylogeographic group of marine fauna may extend beyond to the area offshore of Los Angeles in southern California. The ocean off of central California has experienced a warming over the last 50 years that is driving an ecosystem shift away from the productive subarctic regime towards a depopulated subtropical environment. Seafloor habitats in the Offshore of Pigeon Point map area lie within the Shelf (continental shelf) megahabitat. Significant rocky outcrops, which support kelp-forest communities in the nearshore and rocky-reef communities in deeper water, dominate the inner shelf waters. Biological productivity resulting from coastal upwelling supports populations of Sooty Shearwater, Western Gull, Common Murre, Cassin’s Auklet, and many other less populous bird species. In addition, an observable recovery of Humpback and Blue Whales has occurred in the area; both species are dependent on coastal upwelling to provide nutrients. The large extent of exposed inner shelf bedrock supports large forests of “bull kelp,” which is well adapted for high-wave-energy environments. Common fish species found in the kelp beds and rocky reefs include lingcod and various species of rockfish and greenling.

California↗
USGS2019

Emerging investigator series: Atmospheric cycling of indium in the northeastern United States

Indium is critical to the global economy and is used in an increasing number of electronics and new energy technologies. However, little is known about its environmental behavior or impacts, including its concentrations or cycling in the atmosphere. This study determined indium concentrations in air particulate matter at five locations across the northeastern United States over the course of one year, in 1995. Historical records from a Massachusetts bog core showed that indium atmospheric concentrations in this region changed only modestly between 1995 and 2010. Atmospheric indium concentrations varied significantly both geographically and temporally, with average concentrations in PM 3 of 2.1 ± 1.6 pg m −3 (1 standard deviation), and average particle-normalized concentrations of 0.2 ± 0.2 μg In per g PM 3 . Peaks in the particle-normalized concentrations in two New York sites were correlated with wind direction; air coming from the north contributed higher concentrations of indium than air coming from the west. This correlation, along with measurements of indium in zinc smelter emissions and coal fly ash, suggests that indium in the atmosphere in the northeastern United States comes from a relatively constant low-level input from coal combustion in the midwest, and higher but more sporadic contributions from the smelting of lead, zinc, copper, tin, and nickel north of the New York sample sites. Understanding the industrial sources of indium to the atmosphere and how they compare with natural sources can lead to a better understanding of the impact of human activities on the indium cycle, and may help to establish a baseline for monitoring future impacts as indium use grows.

Massachusetts, New York↗
USGS2000

Hydrologic and meteorological data for an unsaturated-zone study area near the Radioactive Waste Management Complex, Idaho National Engineering and Environmental Laboratory, Idaho, 1997 to 1999

The Radioactive Waste Management Complex (RWMC) Subsurface Disposal Area (SDA) at the Idaho National Engineering and Environmental Laboratory (INEEL) has been used for burial of radioactive waste since 1952. In 1985, the U.S. Geological Survey, in cooperation with the U.S. Department of Energy, began a multi-phase study of the geohydrology of the RWMC to provide a basis for estimating the extent of and the potential for migration of radionuclides in the unsaturated zone beneath the waste trenches and pits. This is the final phase in a study to provide hydrologic and meteorological data collected at a designated test trench area established by the U.S. Geological Survey in 1985 adjacent to the northern boundary of the RWMC SDA. Soil-moisture content measurements were collected approximately monthly during the 1997-99 period from 13 neutron-probe access holes with a neutron moisture gage. A meteorological station inside the test trench area provides data for the determination of evapotranspiration rates. This station measures soil surface temperature, net radiation, air temperature, relative humidity, windspeed, wind direction, soil heat flux, and precipitation, and also calculates vapor pressure. Meteorological data for the test trench area are available for 1997 and part of 1998. The meteorological and soil-moisture data are contained in files on a compact disk included with this report. The data are presented in simple American Standard Code for Information Interchange (ASCII) format with tab-delimited fields.

Idaho↗
USGS2018

Using automated radio telemetry to quantify activity patterns of songbirds during stopover

During migration, birds require stopover habitat to rest and refuel before resuming flight. While long-distance migratory flights represent a large energy investment, stopover accounts for roughly two-thirds of a bird's total energy expenditure during migration. Therefore, birds should minimize energy expenditure while also minimizing time and predation risk during stopover. To understand activity during migration, we recorded activity patterns (i.e. fine-scale movements associated with a range of behaviors) of 3 species, Red-eyed Vireo ( Vireo olivaceus ), Swainson's Thrush ( Catharus ustulatus ), and Wood Thrush ( Hylocichla mustelina ), at a stopover site along the northern coast of the Gulf of Mexico during autumn migration using automated radio telemetry. We found Red-eyed Vireos to be the most active and Swainson's Thrushes the least active. For each species, we used boosted regression trees to investigate associations between activity and factors known to influence bird behavior during stopover. While species differed, day of year and temperature were important predictors of activity for all species. Vireos were active early in the season, under light winds and warmer temperatures, and on evenings when winds were more favorable. Thrushes were more active as the season progressed and when temperatures were cooler. Thrush activity also differed between years, although thrushes increased activity later in the season during all years. Our results illustrate automated radio telemetry as a unique and valuable tool for understanding fine-scale behaviors of birds during stopover.

Alabama↗
USGS1979

Analyses of surficial deposits, central Brooks Range, Alaska

Seventy-nine sediment samples from the central Brooks Range were analyzed for grain-size distribution, shape and composition of grains, and other physical properties. Four statistical measures (sorting, mean diameter, skewness, and kurtosis) were then computed for the sand-to-clay size fraction of all samples. Fan sediments resemble the other alluvial-gravel deposits in consisting of sand and gravel from which very fine sand and the smaller size fractions have been removed by running water. Sorting and rounding of particles is best at the distal ends of large fans. Modern alluvium is better sorted than most fan deposits, with more rounded clasts and generally higher ratios of sand to gravel. Other alluvial deposits from terraces and heavily dissected erosion remnants generally are comparable to modern alluvium. All classes of alluvial gravel are characterized by removal of fines and by decreasing values of mean 0, kurtosis, and skewness as sorting increases. Most samples also have high clay/silt ratios that probably were caused by deflation on windswept bars and floodplains. Lacustrine deposits have clay percentages ranging from about 85 to 35, with silt predominant in more than one-half of the samples. Several samples contain sand and gravel that presumably were ice rafted. Clay-sized particles are unweathered mineral grains, implying that glacial abrasion was their primary source. Flow-slide deposits are very poorly sorted mixtures of gravel, sand, and silt, with clay content averaging only about one percent. Clasts consist of angular fragments of local bedrock, usually schist and phyllite, and matrix materials usually are highly micaceous. Although related flow types, a mud-flow and a debris-flow in till, are generally similar to flow-slide deposits, the mudflow has been modified by running water and the debris flow reflects the composition of its parent till. Other colluvial deposits commonly have high silt and low clay contents, but one solifluction deposit has abundant clay derived from till. Several of the flow-slides and other colluvial deposits are polygenetic, having undergone several episodes of flow that incorporated different types of sediment. Sand deposits include silty floodplain and basin-fill deposits as well as five relatively pure and well sorted dunal and river-bar sands. The silt-rich deposits probably contain large amounts of loess that fell into late-Pleistocene basin fillings and muskegs and later was redeposited on Holocene floodplains. The five dunal and bar sands are dominantly medium to fine sand; relatively well sorted, symmetric to coarse skewed, and leptokurtic. The dunal sands can be distinguished by the presence of very fine sand: wind apparently is less effective than flowing water in removing the finest sand fraction. The glacial deposits consist of till, ice-content stratified drift, and outwash. Till is a poorly sorted mixed sediment that resembles many flow de-posits but typically contains more clay. Two clay-deficient tills resemble fan deposits, implying effective washing by meltwater during glacial transport or deposition of these deposits. The ice-contact stratified drift varies in character from fan-like gravel deposits to sand accumulations nearly as well sorted as those of river bars. Almost all samples reflect some restriction in washing of fines by meltwater, probably owing to irregular topography and resulting poor drainage on and around stagnating glaciers. Most outwash deposits have less fine sand than modern alluvium, probably reflecting the generally high energy of glacial meltwater streams and the absence of vegetation from their floodplains. Samples from the southern Brooks Range are better sorted than those from northern Brooks Range valleys, and their statistical values lie close to those of modern alluvium. Comparisons between the different classes of sediments are facilitated by combining them into (1) gravel, (2) sand, silt, and clay, and (3) mixed deposits. Deposits of unknown or uncertain origin may then be compared directly against sediments from modern streams, dunes, flow-slides and other known sources, and alternative origins of aberrant samples in each of the sediment classes can also be examined. Several samples that initially were classed as fan, lacustrine, or glacial proved to be mixed deposits created by frost-churning, frost-lifting of stones, flowage down faces of river bluffs, and other postdepositional processes. Sorting and mean ϕ of matrix materials were useful in distinguishing the different sediment classes, separating them into contrasting subgroups, and identifying atypical samples. Skewness and kurtosis were generally less useful in this study.

Alaska↗
USGS2014

Controls on sediment production in two U.S. deserts

Much of the world’s airborne sediment originates from dryland regions. Soil surface disturbances in these regions are ever-increasing due to human activities such as energy and mineral exploration and development, recreation, suburbanization, livestock grazing and cropping. Sediment production can have significant impacts to human health with particles potentially carrying viruses such as Valley Fever or causing asthma or other respiratory diseases. Dust storms can cause decreased visibility at the ground level, resulting in highway accidents, and reduced visual quality in park and wildland airsheds. Sediment production and deposition is also detrimental to ecosystem health, as production reduces soil fertility at its source and can bury plants and other organisms where it is deposited. Therefore, it is important to understand how we can predict what areas are prone to producing sediment emissions both before and after soil surface disturbance. We visited 87 sites in two deserts of the western U.S. that represented a range of soil texture and surface cover types. We used a portable wind tunnel to estimate the threshold friction velocity (TFV) required to initiate sediment transport and the amount of sediment produced by the tunnel at a set wind speed. Wind tunnel runs were done before and after soil surface disturbance with a four-wheel drive vehicle. Results show that most undisturbed desert soils are very stable, especially if covered by rocks or well-developed biological soil crusts, which make them virtually wind-erosion proof. Particles at disturbed sites, in contrast, moved at relatively low wind speeds and produced high amounts of sediment. Silt was an important predictor of TFV and sediment production across all sites, whereas the influence of rock cover and biological soil crusts was site-dependent. Understanding the vulnerability of a site after disturbance is important information for land managers as they plan land use activities and attempt to mitigate the harmful effects that sediment production can have on both human and ecosystem health.

Aeolian Research↗
USGS1996

Origin of Bermuda's clay-rich Quaternary paleosols and their paleoclimatic significance

Red clayey paleosols that are chiefly the product of aerosolic dust deposition are interbedded in the Quaternary carbonate formations of the Bermuda oceanic island system. These paleosols provide a basis for reconstructing Quaternary atmospheric circulation patterns in the northwestern Atlantic. Geochemical analyses were performed on representative paleosol samples to identify their parent dust source. Fine-grained fractions were analyzed by energy-dispersive X ray fluorescence to determine trace element (Zr, Y, La, Ti, and Nb) concentrations and to derive geochemical signatures based on immobile element ratios. These ratios were compared with geochemical signatures determined for three possible sources of airborne dust: (1) Great Plains loess, (2) Mississippi River Valley loess, and (3) Saharan dust. The Zr/Y and Zr/La ratios provided the clearest distinction between the hypothesized dust sources. The low ratios in the paleosol B horizons most closely resemble Saharan dust in the <2-μm size class fraction. Contributions from the two North American loessial source areas could not be clearly detected. Thus Bermuda paleosols have a predominantly Saharan aerosolic dust signature. Saharan dust deposition on Bermuda during successive Quaternary glacial periods is consistent with patterns of general circulation models, which indicate that during glacial maxima the northeast summer trade winds were stronger than at present and reached latitudes higher than 30°N despite lower-than-present sea surface temperatures in the North Atlantic.

Journal of Geophysical Research D: Atmospheres↗
USGS2024

Database and time series of nearshore waves along the Alaskan coast from the United States-Canada border to the Bering Sea

Alaska’s Arctic coast has some of the highest coastal erosion rates in the world, primarily driven by permafrost thaw and increasing wave energy. In the Arctic, a warming climate is driving sea ice cover to decrease in space and time. A lack of long-term observational wave data along Alaska’s coast challenges the ability of engineers, scientists, and planners to study and address threats and effects from wave-driven erosion and flooding. To overcome the lack of available observational wave data in the nearshore in this study by the U.S. Geological Survey, waves were downscaled with the Simulating WAves Nearshore numerical wave model (SWAN) for the hindcast period of 1979 to 2019 from the United States-Canada border to the Bering Sea utilizing nine model domains. For each domain, the model was forced at the open boundary with 2,500 representative “sea states,” which are likely combinations of significant wave heights, mean wave periods, mean wave directions, and wind speeds and directions. The sea states were obtained from the European Centre for Medium-Range Weather Forecasts “ERA5” dataset for reanalysis of winds and waves using a multivariant maximum-dissimilarity algorithm. The SWAN runs created a downscaled wave database at each grid point, which was used to reconstruct the 40-year time series in the nearshore along the 5- and 10-meter isobaths at locations approximately 400 m apart and corresponding to transects spaced approximately 50 m alongshore, as developed for USGS shoreline-change assessments. Reconstructed time series were compared to observations to validate the numerical model and the downscaled wave database method and showed overall good agreements.

Alaska↗
USGS1993

Coalbed methane potential of the Upper Cretaceous Mesaverde and Meeteetse formations, Wind River Reservation, Wyoming

The environments of deposition of the uppermost part of the Cody Shale and the Mesaverde and Meeteetse Formations of Late Cretaceous age were studied on outcrop in the Shotgun Butte area in the north-central part of the Wind River Reservation. A shoreface sandstone occurs in the lower part of the Mesaverde Formation at all localities studied, and is directly overlain by a coaly interval. Repetitive coarsening-upward cycles of mudstone, siltstone, and sandstone occur in the 200 ft interval of the upper part of the Cody Shale below the shoreface sandstone. These Cody sandstones are typically hummocky cross stratified with symmetrical ripples near the top, indicating that they are largely storm surge deposits that were later reworked. Channel-form sandstones from 10 to 20 ft thick, with abundant locally derived clayey clasts, occur in a 75 ft thick interval below the shoreface at one locality. These unusual sandstones are largely confined to a narrow area of the outcrop and grade laterally into more typical storm surge deposits. They may be unusually large storm surge channels created when high-energy flow conditions were localized to a limited area of the shelf. The Mesaverde Formation above the shoreface sandstone is divided into a middle member and the Teapot Sandstone Member. The lower part of the middle member is everywhere coaly. Erosional-based sandstones in this coaly interval are highly variable in thickness and architecture. Thin, single channel sandstone bodies were deposited by moderate to high sinuosity streams, and thick, multistory channel sandstone bodies were deposited by rapidly switching fluvial channel systems that remained relatively stationary for extended periods of time. The architecture of the fluvial channel sandstones in the overlying noncoaly interval appears to be highly variable as well, with complex multistory sandstones occurring at different stratigraphic levels at different localities. This distribution may be explained by long term stability of fluvial channel systems followed by major avulsion events. The Teapot Sandstone Member consists of fairly persistent to lenticular white multistory sandstone units that are as much as 85 ft thick and contain trough cross beds as much as 5 ft high. These sandstone units are interbedded with gray mudstones and carbonaceous shales. Paleosols are preserved at the tops of individual sandstones in the multistory units in some places. It is suggested that these sandstones were deposited largely by low-sinuosity to braided streams. The Meeteetse Formation consists of alternating coal and sandstone-rich intervals. The coal-rich intervals have relatively thin fluvial channel sandstones probably deposited by medium to high sinuosity streams whereas the sand-rich intervals have thick (to 105 ft) multistory fluvial channel sandstones possibly deposited by low-sinousity to braided streams.

Conference Paper↗
USGS2016

Variability of bed drag on cohesive beds under wave action

Drag force at the bed acting on water flow is a major control on water circulation and sediment transport. Bed drag has been thoroughly studied in sandy waters, but less so in muddy coastal waters. The variation of bed drag on a muddy shelf is investigated here using field observations of currents, waves, and sediment concentration collected during moderate wind and wave events. To estimate bottom shear stress and the bed drag coefficient, an indirect empirical method of logarithmic fitting to current velocity profiles (log-law), a bottom boundary layer model for combined wave-current flow, and a direct method that uses turbulent fluctuations of velocity are used. The overestimation by the log-law is significantly reduced by taking turbulence suppression due to sediment-induced stratification into account. The best agreement between the model and the direct estimates is obtained by using a hydraulic roughness of 10 - 4 "> − 4 m in the model. Direct estimate of bed drag on the muddy bed is found to have a decreasing trend with increasing current speed, and is estimated to be around 0.0025 in conditions where wave-induced flow is relatively weak. Bed drag shows an increase (up to fourfold) with increasing wave energy. These findings can be used to test the bed drag parameterizations in hydrodynamic and sediment transport models and the skills of these models in predicting flows in muddy environments.

Water↗