Geology ReportsSearch

SEARCH · Geology Reports

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21Linked to original sources

Inner-shelf ocean dynamics and seafloor morphologic changes during Hurricane Sandy

Hurricane Sandy was one of the most destructive hurricanes in US history, making landfall on the New Jersey coast on Oct 30, 2012. Storm impacts included several barrier island breaches, massive coastal erosion, and flooding. While changes to the subaerial landscape are relatively easily observed, storm-induced changes to the adjacent shoreface and inner continental shelf are more difficult to evaluate. These regions provide a framework for the coastal zone, are important for navigation, aggregate resources, marine ecosystems, and coastal evolution. Here we provide unprecedented perspective regarding regional inner continental shelf sediment dynamics based on both observations and numerical modeling over time scales associated with these types of large storm events. Oceanographic conditions and seafloor morphologic changes are evaluated using both a coupled atmospheric-ocean-wave-sediment numerical modeling system and observation analysis from a series of geologic surveys and oceanographic instrument deployments focused on a region offshore of Fire Island, NY. The geologic investigations conducted in 2011 and 2014 revealed lateral movement of sedimentary structures of distances up to 450 m and in water depths up to 30 m, and vertical changes in sediment thickness greater than 1 m in some locations. The modeling investigations utilize a system with grid refinement designed to simulate oceanographic conditions with progressively increasing resolutions for the entire US East Coast (5-km grid), the New York Bight (700-m grid), and offshore of Fire Island, NY (100-m grid), allowing larger scale dynamics to drive smaller scale coastal changes. Model results in the New York Bight identify maximum storm surge of up to 3 m, surface currents on the order of 2 ms-1 along the New Jersey coast, waves up to 8 m in height, and bottom stresses exceeding 10 Pa. Flow down the Hudson Shelf Valley is shown to result in convergent sediment transport and deposition along its axis. Modeled sediment redistribution along Fire Island showed erosion across the crests of inner shelf sand ridges and sedimentation in adjacent troughs, consistent with the geologic observations.

Continental Shelf Research

Delineation of Areas Contributing Water to the Dry Brook Public-Supply Well, South Hadley, Massachusetts

Areas contributing water to the Dry Brook public-supply well in South Hadley, Massachusetts, were delineated with a numerical ground-water-flow model that is based on geologic and hydrologic information for the confined sand and gravel aquifer pumped by the supply well. The study area is along the Connecticut River in central Massachusetts, about 12 miles north of Springfield, Massachusetts. Geologic units in the study area consist of Mesozoic-aged sedimentary and igneous bedrock, late-Pleistocene glaciolacustrine sediments, and recent alluvial deposits of the Connecticut River flood plain. Dry Brook Hill, immediately south of the supply well, is a large subaqueous lacustrine fan and delta formed during the last glacial retreat by sediment deposition into glacial Lake Hitchcock from a meltwater tunnel that was likely near where the Connecticut River cuts through the Holyoke Range. The sediments that compose the aquifer grade from very coarse sand and gravel along the northern flank of the hill, to medium sands in the body of the hill, and to finer-grained sediments along the southern flank of the hill. The interbedded and overlapping fine-grained lacustrine sediments associated with Dry Brook Hill include varved silt and clay deposits. These fine-grained sediments form a confining bed above the coarse-grained aquifer at the supply well and partially extend under the Connecticut River adjacent to the supply well. Ground-water flow in the aquifer supplying water to Dry Brook well was simulated with the U.S. Geological Survey ground-water-flow modeling code MODFLOW. The Dry Brook aquifer model was calibrated to drawdown data collected from 8 observation wells during an aquifer test conducted by pumping the supply well for 10 days at a rate of 122.2 cubic feet per minute (ft3/min; 914 gallons per minute) and to water levels collected from observation wells across the study area. Generally, the largest hydraulic conductivity values used in the model were in the sand and gravel aquifer near the Dry Brook well, which is consistent with the geologic information. Results of aquifer-test simulation indicated that spatially variable aquifer hydraulic properties and boundary conditions affected heads and ground-water flow near the well. A comparison and analysis of water-level fluctuations in study area wells to fluctuations in the Connecticut River indicated a hydraulic connection of the aquifer with the river, which is also consistent with geologic information. Simulated ground-water levels indicated that most ground water in the study area flowed toward and discharged to the Connecticut River and the Dry Brook well. Small amounts of ground water also discharged to smaller streams (Dry Brook and Bachelor Brook) in the study area. Areas contributing water to the well were delineated with the MODPATH particle-tracking routine. Results of the contributing-area analysis indicated that the greatest sources of water to the well were recharge in the Dry Brook Hill area and infiltration of Connecticut River water in an area beyond the extent of the confining bed where the aquifer is in hydraulic connection with the river. The amount of water entering the Dry Brook well from recharge dominated at a lower pumping rate (40.0 ft3/min); about 90 percent of the pumped water originated from recharge and boundary flow, and infiltration from the Connecticut River supplied the remaining 10 percent. At a high pumping rate (122.2 ft3/min), however, about half of the water pumped from the Dry Brook well originated from recharge and boundary flow (49 percent), and half originated from infiltration of water from the Connecticut River (51 percent). Results of a sensitivity analysis of the extent of areas contributing water to the Dry Brook well when pumped at 122.2 ft3/min indicated that the size of these areas did not substantially change when aquifer properties were varied. In contrast, however, the size of these areas changed most when the recharge

Water-Resources Investigations Report

Geologic framework for the national assessment of carbon dioxide storage resources: Columbia Basin of Oregon, Washington, and Idaho, and the Western Oregon-Washington basins

The 2007 Energy Independence and Security Act (Public Law 110–140) directs the U.S. Geological Survey (USGS) to conduct a national assessment of potential geologic storage resources for carbon dioxide (CO 2 ). The methodology used by the USGS for the national CO 2 assessment follows that of previous USGS work. The methodology is non-economic and intended to be used at regional to subbasinal scales. This report identifies and contains geologic descriptions of three storage assessment units (SAUs) in Eocene and Oligocene sedimentary rocks within the Columbia, Puget, Willapa, Astoria, Nehalem, and Willamette Basins of Oregon, Washington, and Idaho, and focuses on the characteristics, specified in the methodology, that influence the potential CO 2 storage resource in those SAUs. Specific descriptions of the SAU boundaries as well as their sealing and reservoir units are included. Properties for each SAU, such as depth to top, gross thickness, porosity, permeability, groundwater quality, and structural reservoir traps, are provided to illustrate geologic factors critical to the assessment. The designated sealing unit in the Columbia Basin is tentatively chosen to be the ubiquitous and thick Miocene Columbia River Basalt Group. As a result of uncertainties regarding the seal integrity of the Columbia River Basalt Group, the SAUs were not quantitatively assessed. Figures in this report show SAU boundaries and cell maps of well penetrations through sealing units into the top of the storage formations. The cell maps show the number of penetrating wells within one square mile and are derived from interpretations of incompletely attributed well data, a digital compilation that is known not to include all drilling. The USGS does not expect to know the location of all wells and cannot guarantee the amount of drilling through specific formations in any given cell shown on the cell maps.

Idaho, Oregon, Washington

A progress report on results of test drilling and ground-water investigations of the Snake Plain aquifer, southeastern Idaho: Part 1: Mud Lake Region, 1969-70 and Part 2: Observation Wells South of Arco and West of Aberdeen

The results of drilling test holes to depths of approximately 1,000 feet in the Mud Lake region show that a large part of the region is underlain by both sedimentary deposits and basalt flows. At some locations, predominantly sedimentary deposits were penetrated; at others, basalt flows predominated. The so-called Mud Lake-Market Lake barrier denotes a change in geology. From the vicinity of the barrier area, as described by Stearns, Crandall, and Steward (1938, p. 111), up the water-table gradient for at least a few tens of miles, the saturated geologic section consists predominantly of beds of sediments that are intercalated with numerous basalt flows. Downgradient from the barrier, sedimentary deposits are not common and practically all the water-bearing formations are basalt, at least to the depths explored so far. Thus, the barrier is a transition zone from a sedimentary-basaltic sequence to a basaltic sequence. The sedimentary-basaltic sequence forms a complex hydrologic system in which water occurs under water-table conditions in the upper few tens of feet of saturated material and under artesian conditions in the deeper material in the southwest part of the region. The well data indicate that southwest of the barrier, artesian pressures are not significant. Southwest of the barrier, few sedimentary deposits occur in the basalt section and, as described by Mundorff, Crosthwaite, and Kilburn (1964). ground water occurs in a manner typical of the Snake Plain aquifer. In several wells, artesian pressures are higher in the deeper formations than in the shallower ones, but the reverse was found in a few wells. The available data are not adequate to describe the water-bearing characteristics of the artesian aquifer nor the effects that pumping in one zone would have on adjacent zones. The water-table aquifer yields large quantities of water to irrigation wells.

Idaho

Reconnaissance investigation of the geology and hydrogeology of Lackland Air Force Base, San Antonio, Texas

An investigation at Lackland Air Force Base and Lackland Air Force Base Training Annex (Medina Base) was conducted from May to September 1988 to delineate the subsurface geology, to describe the hydrogeology within the study area, and to determine possible migration pathways for contaminants. Data from this investigation supplement data collected in conjunction with other Air Training Command studies conducted under the Installation Restoration Program. The geologic formations in the vicinity of Lackland Air Force Base and Medina Base consist of sedimentary rocks of Cretaceous, Tertiary, and Quaternary age. The lithology of these formations consists primarily of limestone and marl, with lesser amounts of gravel, sand, silt, shale, and clay. The formations that comprise the geologic setting at Lackland Air Force Base and Medina Base include the Navarro Group of Late Cretaceous age, the Midway Group and Uvalde Gravel of Tertiary age, and the Leona Formation and fluviatile terrace deposits of Quaternary age. The age of the faulting within the study area has not been determined accurately, but the faulting might have occurred during intervals from Early Cretaceous to Holocene time. During these tectonic episodes, uplift of the Edwards Plateau might have occurred. This uplift could have enhanced erosion of the Cretaceous age Edwards Group, which is north of the study area, causing deposition of alluvial deposits south of this tectonic activity. The Leona Formation is composed of limestone gravel deposits forming terraces in the valleys of present streams. In general, these terraces are topographically lower than those formed by the Uvalde Gravel. In contrast, the fluviatile terrace deposits are above flood level along entrenched streams such as Leon and Medio Creeks. The Leona Formation is generally above the level of these fluviatile terrace deposits. A review of the hydrogeologic literature indicated that the Navarro and Midway Groups do not yield water to wells in Bexar County. However, recent studies by the U.S. Geological Survey at Kelly Air Force Base indicate that the uppermost beds of the Navarro Group can be saturated but yield little or no water to wells. Each stream terrace deposit of the Leona Formation and the fluviatile terrace deposits are separate water-bearing units. At Lackland Air Force Base, shallow ground water is present in the Leona Formation and the flow probably is toward Leon Creek. At Medina Base, the fluviatile terrace deposits are present along both banks of Medio Creek and probably are separate water-bearing units. Furthermore, ground-water flow in each of these units probably is toward Medio Creek. The Uvalde Gravel, present only at and west of Medina Base, is not a source of shallow ground water. However, during periods of precipitation, the formation can readily absorb precipitation and surface runoff. Water drains quickly through the formation because of its topographically high position and substantial hydraulic conductivity. Major pathways of potential contaminant migration off the bases include the local streams of Medio and Leon Creeks, and to a lesser extent, the shallow ground water beneath the bases. Although the Uvalde Gravel is not a source of shallow ground water at Medina Base, it drains water quickly, and wastes that might be buried in the gravel could be a potential source of contamination during brief ground-water recharge periods resulting from major precipitation.

Texas

Geologic, hydrologic, and geochemical interpretations of mineral deposits as analogs for understanding transport of environmental contaminants

Base- and precious-metal mineral deposits comprise anomalous concentrations of metals and associated elements, which may be useful subjects for study as analogs for migration of environmental contaminants. In the geologic past, hydrothermal mineral deposits formed at the intersection of favorable geologic, hydrologic and geochemical gradients. In the present, weathering of these sulfide-rich deposits occurs as a result of the interplay between rates of oxygen supply versus rates of ground or surface-water flow. Transport and spatial dispersion of elements from a mineral deposit occurs as a function of competing rates of water flow versus rates of attenuation mechanisms such as adsorption, dilution, or (co)precipitation. In this paper we present several case studies from mineralized and altered sedimentary and crystalline aquifers in the western United States to illustrate the geologic control of ground-water flow and solute transport, and to demonstrate how this combined approach leads to a more complete understanding of the systems under study as well as facilitating some capability to predict major flow directions in aquifers.

Journal of Geochemical Exploration

Shoreface translation and the Holocene stratigraphic record: Examples from Nova Scotia, the Mississippi Delta and eastern Australia

Classic descriptive models of barrier sedimentation have been developed with data from the Atlantic and Gulf coasts of the United States. These models are dominated by low to moderate rates of relative sea level (RSL) rise and wave energy. Barriers respond by landward recycling of sediment through the mechanism of shoreface retreat. Sedimentation processes on the central coast of New South Wales (N.S.W.), Australia, consist of rapid RSL rise in early Holocene times followed by a stillstand since 6500 B.P. Wave energy is relatively high year-round and sand sources for barrier formation are only found on the inner shelf. Barrier sedimentation on the central coast of N.S.W. exhibits a thick, composite sequence composed of a basal marine transgressive sand overlain by regressive beach and dune facies. The Louisiana coast surrounding the Mississippi delta is underlain by compacting deltaic muds which generate very rapid rates of RSL rise. The Louisiana coast experiences low wave energy punctuated by high-energy tropical and extra-tropical storm events. Barrier sediments accumulate from the erosion of deltaic headlands and undergo a transformation from subaerial barrier island systems to subaqueous shoals located on the inner shelf. Drumlins experience coastal erosion on the Eastern Shore of Nova Scotia and provide a sediment source for compartmented estuary mouth barriers. An ongoing, moderate rise of RSL results from the passage of a glacial forebulge. Wave energy is intermediate between Louisiana and N.S.W. and displays a seasonal pattern dominated by frequent winter storms. Coastal barrier sedimentation is episodic, consisting of a period of beach ridge progradation followed by barrier destruction and re-establishment further landward. The three contrasting sedimentary sequences found in examples from Louisiana, N.S.W. and Nova Scotia indicate that presently available sedimentation models from locations such as the middle Atlantic or Texas coasts of the United States may only represent well-documented regional case studies. A true generalised coastal sedimentation model is required which can identify the parameters controlling vertical and horizontal translation of the depositional surface and provide relationships between these parameters which quantitatively predict the genesis, distribution and geometry of coastal sedimentary facies.

Marine Geology

Sedimentary history of the Tethyan margins of eastern Gondwana during the Mesozoic

A composite Mesozoic geological history for the Gondwana margins to the Eastern Tethys Ocean can be assembled from stratigraphic successions on the Australian and Himalayan margins and from drill sites of Ocean Drilling Program Legs 122 and 123. During the Triassic, this region drifted northwards, entering tropical paleolatitudes during the Late Triassic-Early Jurassic, then returned to mid-latitudes for the Middle Jurassic through Early Cretaceous. Shallow-water carbonates are restricted to the tropical-latitude interval; at other times, the margins are dominated by clastic deposition. Episodes of deltaic sandstone progradation over the shelves are caused by eustatic sealevel fluctuations, by wet climatic conditions within the source regions and by local tectonic activity. A major hiatus between Callovian shallow-water shelf deposits and Oxfordian deep-water sediments is an ubiquitous feature, which may be related to a widespread plate tectonic reorganization and the cascading effects of associated sealevel rise and elevated carbon dioxide levels. Off Northwest Australia, this Callovian/Oxfordian event also coincides with an episode of block faulting. Marginal sediments deposited during the Late Jurassic are mainly marine claystone containing abundant terrigenous organic matter. Shallow depths of carbonate compensation (CCD) during the Late Jurassic through Early Cretaceous prevented the preservation of carbonate over most of the Argo basin off Northwest Australia, and these deep-sea sediments consist mainly of condensed, oxygenated radiolarian-rich claystone. During the late Kimmeridgian-early Tithonian, a downward excursion in the CCD enabled limited preservation of some larger nannofossils and mollusc fragments within the pelagic deposits, a feature also recorded in coeval deposits in the Atlantic. Explosive volcanism accompanied the final stages of rifting between India and Australia during the late Berriasian and Valanginian, producing volcaniclastic debris washing into the deltas and widespread ash deposits. The late Barremian and Aptian sediments indicate a rise in the CCD, accompanied by warming of the region and an increased delivery of organic-rich claystone into the basins.

Book chapter

Results of geological and geochemical investigations in an area northwest of the Chulitna River, central Alaska Range

Sedimentary and volcanic rock units of Paleozoic and Mesozoic age, faults, and elongate bodies of intrusive rock, particularly serpentinites, have a dominant northeasterly trend in an area northwest of the Chulitna River between Eldridge Glacier and Bull River. The serpentinites locally contain abnormal (as much as 0.5 percent) concentrations of nickel, have one newly identified occurrence of chromite, and are hosts to small epigenetic lodes containing copper, gold, and silver. Other epigenetic concentrations of copper or other metals occur in interlayered basalt and limestone at Partin and Canyon Creeks in the southwestern part of the area and in porphyry near Costello Creek in the northern part of the area. Tin occurs in greisen on upper Ohio Creek, and abnormal concentrations of tin also characterize mineralized rocks along Canyon Creek and at a prospect near Long Creek. Mineralized rocks characterized by silver, lead, and zinc crop out near Lookout Mountain. Anomalous concentrations of gold and other metals occur in stream sediments at isolated sites in upper Long Creek and at Coal Creek, as well as in several areas near known lode mineral occurrences. Shotgun and McCallie Creeks both contain stream sediments with anomalous concentrations of metals and both head into the basalt-limestone unit which is the host rock at Partin and Canyon Creeks; these facts suggest that other concentrations may be found.

Circular

Report for borehole explosion data acquired in the 1999 Los Angeles Region Seismic Experiment (LARSE II), southern California: Part II, data tables and plots

The Los Angeles Region Seismic Experiment (LARSE), a joint project of the U.S. Geological Survey (USGS) and the Southern California Earthquake Center (SCEC), was conducted to produce seismic images of the subsurface in the Los Angeles region. Primary targets were major fault systems and sedimentary basins; the goal of the project was to address the earthquake hazard posed by these geologic features. The first phase of data collection (LARSE 1) was completed in 1994; the second phase (LARSE 2) was completed in 1999. A description of the 1999 survey and an overview of both phase I and II is given in Fuis and others (2001). In this report, we present the technical details for the explosion data collected in 1999.

California

Geologic map of MTM −10022 and −15022 quadrangles, Morava Valles and Margaritifer basin, Mars

The landscape in Mars Transverse Mercator (MTM) −10022 and −15022 quadrangles (lat −7.5° N. to −17.5° N. between long 335° E. and 340° E.) in Margaritifer Terra preserves a record of sedimentary and alluvial deposits, volcanic and tectonic structures, and erosional landforms that record a long and complex geologic and geomorphic history. MTM −10022 and −15022 quadrangles primarily encompass Morava Valles, the terminus of the Samara-Himera and Paraná-Loire valley networks, the broad catchment informally named Margaritifer basin, and Margaritifer Chaos. Morava Valles is the lowermost reach of the northward draining mesoscale outflow system that consists of Uzboi Vallis, Ladon Valles, and Morava Valles, was sourced from flow out of Argyre basin, and incises across and between the ancient Ladon and Holden impact basins. The broad-scale topography and surface relief within the map, including the topographic low occupied by Margaritifer basin, were largely shaped during the Noachian by the formation of the Holden, Ladon, and Ares impact basins and the Chryse trough. Multiple processes modified the ancient surface until the Late Noachian and resulted in the formation of the terra unit that forms the widely exposed surface. Later resurfacing associated with likely sedimentary and volcanic processes modified predominantly lower elevation surfaces and basins during the Late Noachian into at least the Hesperian. Sedimentary processes during the Late Noachian were dominated by fluvial incision of the Samara-Himera and Paraná-Loire valley networks and discharge related to the dissection of Morava Valles that drained Ladon basin. The history of geomorphic activity within Margaritifer basin was more complex and was likely dominated by the evolution of Morava Valles relative to the formation of the valley networks. The floor of Margaritifer basin preserves likely lacustrine plains related to sedimentation in water ponded during early discharge from Morava Valles, which were later embayed by volcanic plains. Crater densities and cross-cutting relations indicate Margaritifer basin evolved over a relatively short period of geologic time. The timing of the last drainage out of Morava Valles is not well constrained but could have occurred during the Hesperian. Structural collapse and the formation of the Margaritifer Chaos and other chaotic terrain formed by the release of subsurface water that may have been related to volcanic activity along the southern margin of Margaritifer basin. Final geomorphic events within the map region include the formation of Late Hesperian to perhaps Amazonian alluvial fans within some craters and isolated mass wasting on steep slopes. A final, variable veneer associated with locally occurring impacts and redistribution of fine-grained material by eolian processes resulted in the landscape observed today.

Scientific Investigations Map

Sea-floor morphology and sedimentary environments of western Block Island Sound, northeast of Gardiners Island, New York

Multibeam-echosounder data, collected during survey H12299 by the National Oceanic and Atmospheric Administration in a 162-square-kilometer area of Block Island Sound, northeast of Gardiners Island, New York, are used along with sediment samples and bottom photography, collected at 37 stations in this area by the U.S. Geological Survey during cruise 2013-005-FA, to interpret sea-floor features and sedimentary environments. These data and interpretations provide important base maps for future studies of the sea floor, focused, for example, on benthic ecology and resource management. The features and sedimentary environments on the sea floor are products of the glacial history and modern tidal regime. Features include bedforms such as sand waves and megaripples, boulders, a large current-scoured depression, exposed glaciolacustrine sediments, and areas of modern marine sediment. Sand covers much of the study area and is often in the form of sand waves and megaripples, which indicate environments characterized by coarse-grained bedload transport. Boulders and gravelly lag deposits, which indicate environments of erosion or nondeposition, are found off the coast of Gardiners Island and on bathymetric highs, probably marking areas where deposits associated with recessional ice-front positions, the northern flank of the terminal moraine, or coastal-plain sediments covered with basal till are exposed. Bottom photographs and video of boulders show that they are commonly covered with sessile fauna. Strong tidal currents have produced the deep scour depression along the northwestern edge of the study area. The eastern side of this depression is armored with a gravel lag. Sea-floor areas characterized by modern marine sediments appear featureless at the 2-meter resolution of the bathymetry and flat to current rippled in the photography. These modern environments are indicative of sediment sorting and reworking.

New York

Effect of faulting on ground-water movement in the Death Valley Region, Nevada and California

This study characterizes the hydrogeologic system of the Death Valley region, an area covering approximately 100,000 square kilometers. The study also characterizes the effects of faults on ground-water movement in the Death Valley region by synthesizing crustal stress, fracture mechanics, and structural geologic data. The geologic conditions are typical of the Basin and Range Province; a variety of sedimentary and igneous intrusive and extrusive rocks have been subjected to both compressional and extensional deformation. Faulting and associated fracturing is pervasive and greatly affects ground-water flow patterns. Faults may become preferred conduits or barriers to flow depending on whether they are in relative tension, compression, or shear and other factors such as the degree of dislocations of geologic units caused by faulting, the rock types involved, the fault zone materials, and the depth below the surface. The current crustal stress field was combined with fault orientations to predict potential effects of faults on the regional groundwater flow regime. Numerous examples of faultcontrolled ground-water flow exist within the study area. Hydrologic data provided an independent method for checking some of the assumptions concerning preferential flow paths.

California, Nevada

Fish Lake limnology and watershed aqueous geochemistry, Fish Lake Plateau, Utah

Fish Lake is located at 2696 m elevation on the Fish Lake Plateau with a bedrock geology of Oligocene to Pliocene age volcanics and Cretaceous to Eocene age sedimentary rocks. Lake bathymetry indicates a maximum depth of ~27 m and volume of 2.31 x 108 m3. The lake is dimictic with summer water column temperature declines of 13˚C between 7 to 15 m depth, whereas in spring and fall water column is isothermal. Numerous surface streams flow into the lake and there is one surface outflow stream, Lake Creek, which drains to the northeast into Johnson Valley Reservoir and the Fremont River, which is a tributary of the upper Colorado River. Surface inflow streams and spring waters are generally dilute and ionic compositions are consistent with bedrock geology. Spring and creek water oxygen and hydrogen stable isotope compositions indicate snowmelt is the predominant water source to the lake. High evaporative enrichment is indicated by lake water stable oxygen and hydrogen compositions and conservative ions, which suggest evaporative water loss equal or greater than inflow. The ionic and isotope data combined with preliminary discharge measurements provide a preliminary estimated lake-water residence time between approximately 15 and 30 years, although groundwater flux is currently unknown. Dissolved silica concentrations decline by two orders of magnitude between inflowing waters and summer lake waters, indicating substantial uptake by freshwater diatoms and high biological productivity. During summer, epilimnion pH values of 8.7 contribute to slight oversaturation with respect to calcite/aragonite, which suggests that precipitates could form in minor concentration. Below the thermocline pH is near neutral and carbonate mineral dissolution within the water column is likely.

Utah

3-D Modeling of the Duluth Complex from geophysical data

The Mesoproterozoic Duluth Complex in northeastern Minnesota is one of the major plutonic components of the Midcontinent Rift System and hosts a variety of copper-nickel sulfide and platinum-group element deposits. The Duluth Complex is composed of a series of individual mafic and felsic intrusions emplaced 1110-1098 Ma within Paleoproterozoic sedimentary rocks of the Animikie basin and volcanic flows of the Midcontinent Rift. Prior work has included 2-D modeling and qualitative geologic interpretations of gravity and magnetic data (e.g., Chandler, 1990; Chandler and Ferderer, 1989), much of which is still preliminary (V. Chandler, written commun., 2020). Three-dimensional modeling has been limited, with only one 3-D model created using Bouguer gravity data constrained by seismic-reflection interpretations as part of a PhD thesis (Allen, 1994). Given the complex geology of the area, 3-D modeling is useful for providing a complete picture of the variable densities, susceptibilities, and electrical resistivities throughout the Duluth Complex and associated volcanic rocks as well as their depth extent beneath sedimentary cover. Models of these geophysical properties at depth enable more accurate geologic mapping in the subsurface which can lead to an improved understanding of the formation history of the Duluth Complex. In this study, we use aeromagnetic data acquired between 1979-1991 (Chandler, 2007), Bouguer gravity data collected since 1950 (Chandler and Lively, 2019), and magnetotelluric data collected in 2019 to create new 2-D and 3-D geophysical models of the Duluth Complex constrained by seismic reflection, geologic, and rock property data. An inversion of the Bouguer gravity data for thickness of the Duluth Complex using constant densities of 3110 kg/m3 and 2670 kg/m3 for the Duluth Complex and surrounding crustal rocks, respectively, results in thicknesses ranging from ~3-28 km for the Duluth Complex and related intrusions and volcanic rocks (Figure 1A). A 3-D model of the magnetotelluric data reveals low resistivity anomalies at ~5-10 km depth below the northern margin of the Duluth Complex and below the Greenwood Lake intrusion (Figure 1B). We expect to encounter low resistivities at depth associated with the Paleoproterozoic Animikie basin, which makes up the floor of the Duluth Complex, and therefore interpret these anomalies as either the base of the complex or as fragments of Animikie sediments interfingered with igneous intrusive rocks. Finally, 3-D voxel models of density and susceptibility illuminate the subsurface distribution of rock properties below the Duluth Complex which, in combination with resistivity and thickness models, can be used to create a 3-D geologic map of this area.

Minnesota

Geologic and geophysical models for Osage County, Oklahoma, with implications for groundwater resources

This report summarizes a three-dimensional (3-D) geologic model that was constructed to provide a framework to investigate groundwater resources of the Osage Nation in northeastern Oklahoma. This report also presents an analysis of an airborne electromagnetic (AEM) survey that assessed the spatial variation of electrical resistivity to depths as great as 300 meters in the subsurface. The report and model provide support for a countywide assessment of groundwater resources, emphasizing the Upper Pennsylvanian rock units in the shallow subsurface of central and eastern Osage County having electrical resistivity properties that may indicate aquifers. Surface outcrops and subsurface stratigraphic picks on wire-line geophysical logs of Upper Pennsylvanian–Lower Permian sedimentary rock were used to construct a 3-D model of the geologic subsurface as an aid for evaluating groundwater resources in Osage County. Quaternary alluvium and terraces along major streams and the Arkansas River are included in the geologic framework model. Data from the AEM survey were subjected to quality-control procedures, truncated at depth of investigation (DOI), and then used to build a 3-D electrical resistivity model making use of secondary and tertiary interpolation profiles between primary data profiles. The AEM data highlight westward-inclined resistivity gradients that parallel the shallow dip of bedrock strata; bodies have resistivity >30 ohm-meters, and extend as much as 10 kilometers (km) down the dip of host geologic units. Volume analysis and internal imaging of an integrated 3-D geology and electrical resistivity model give a proxy for likely aquifer units with large relative volumes of high resistivity: Quaternary alluvium, Elgin Sandstone Lentil in the upper part of the Vamoosa Group, Tallant Formation, and parts of a combined Wann-Iola-Chanute Formation. Less voluminous, high-resistivity bodies correspond to intervals in the lower part of the Vamoosa Group in the east-central part of the county and probable limestone intervals in the upper part of the Vanoss Group in the northwest part of the county. Northwestern and eastern troughs of potable water previously defined for central Osage County generally correspond to down-dip projections of high-resistivity bodies associated with the Elgin Sandstone Lentil of the Vamoosa Group and Tallant Formation, respectively.

Oklahoma

Regional and other general factors bearing on evaluation of earthquake and other geologic hazards to coastal communities of southeastern Alaska

The great Alaska earthquake of March 27, 1964, brought into sharp focus the need for engineering geologic studies in seismically active regions. As a result, nine communities in southeastern Alaska were selected for reconnaissance investigations as an integral part of an overall program to evaluate earthquake and other geologic hazards in most of the larger Alaska coastal communities. This report gives background information on the regional and other general factors that bear on these evaluations. Southeastern Alaska, about 525 miles long and averaging about 125 miles in width, consists of a narrow mainland strip and numerous islands. For the most part, it is a region of rugged relief with numerous glaciers capping many of the higher mountainous areas and with long linear fiords forming the inland waterways. A maritime climate prevails with mild winters and cool summers. The southeastern part of the region receives the highest precipitation in the continental United States. Ketchikan, with a population of 6,994 in 1970, is the largest city. Geology and structure of the area are complex. Igneous, metamorphic, and sedimentary rocks crop out and range in age from Paleozoic to Tertiary. Surficial deposits of Pleistocene and Holocene age mantle many areas. All of southeastern Alaska, except probably the highest peaks, was covered by glacier ice advances of late Pleistocene age. Major deglaciation was well advanced by 10,000 years ago--a time which approximately marks the end of the Pleistocene and the beginning of the Holocene. There followed a period of warm climate called the Hypsithermal, which in southeastern Alaska began 7,000-8,000 years ago and ended about 4,800-3,500 years ago. Glaciers in most places receded back of their present positions. The Hypsithermal was followed by an interval (termed Neoglaciation) of cooler climate and resurgence of glacier ice which continues to the present, although most glaciers are now rapidly receding. During the past 10,000 years worldwide sea level has risen about 100 feet, but during the past 4,000 years it has risen only about 10 feet or about 0.03 inch per year. With sea level used as a datum, the amount of sea-level rise must be added to the apparent uplift of land for the time under consideration to determine the actual amount of land uplift. The widespread presence of emergent marine deposits, several hundred feet above sea level, demonstrates that the land in southeastern Alaska has been uplifted since the last major deglaciation. The greatest known has been uplifted since the last major deglaciation. The greatest known uplift is in the vicinity of Juneau where glaciomarine deposits are present 750 feet above present sea level. Part of southeastern Alaska is presently undergoing one of the most rapid rates of uplift of any place in the world. The fastest emergence is occurring in the Glacier Bay area where the land is being uplifted relative to sea level approximately 3.9 cm per year. Most or all of the uplift appears to be due to rebound as a result of deglaciation. Southeastern Alaska lies within the circum-Pacific earthquake belt, one of the world's greatest zones of seismic activity. During historic time, there have been five earthquakes in the region with magnitudes of 8 or greater, three with magnitudes of 7 to 8, eight with magnitudes of 6 to 7, more than 15 with magnitudes of 5 to 6, and about 140 recorded earthquakes with magnitudes smaller than 5 or of unassigned magnitudes. All of the earthquakes with magnitudes 8 or greater, and a large proportion of the others, appear to be related to the active Fairweather- Queen Charlotte Islands fault system or its western extension, the Chugach-St. Elias fault. Earthquake epicenters on the Denali fault system, the other major fault system in southeastern Alaska, are few in comparison. However, because high microearthquake activity has been recorded recently on this system and earthquakes of moderate size have occurred on some of its segments, the Denali fault system probably should not be dismissed as a relict fault system of no current tectonic importance. There are numerous other known faults, as well as lineaments that may be faults of varying degrees of tectonic activity in southeastern Alaska, adjacent Canada, and eastern Alaska. One of these elements is the Totschunda fault system, which connects with the Denali fault system in eastern Alaska; it has been very active during Holocene time but few historical earthquake epicenters appear to be related to it. Both historical seismicity and geologic conditions, such as frequency and recency of faulting, must be considered together to permit an assessment of the future earthquake probability of an area. Data are too few for both factors for an accurate evaluation to be made of earthquake probability in southeastern Alaska. However, information compiled in the form of strain-release and seismic-zone maps permit some generalizations. Thus, it is tentatively concluded that most, if not all, of southeastern Alaska should be placed in seismic zone 3, a zone in which earthquakes of magnitude greater than 6 will occur from time to time and where there may be major damage to manmade structures. Inferred effects from future earthquakes in southeastern Alaska include: (1) surface displacement along faults and other tectonic land-level changes, (2) ground shaking, (3) compaction, (4) liquefaction in cohesionless materials, (5) reaction of sensitive and quick clays, (6) water-sediment ejection and associated subsidence and ground fracturing, (7) earthquake-induced sub aerial slides and slumps, (8) earthquake induced subaqueous slides, (9) effects on glaciers and related features, (10) effects on ground water and stream flow, and (11) tsunamis, seiches, and other abnormal water waves. Because of the reconnaissance nature of our studies in the coastal communities and the sparsity of laboratory data on physical properties of geologic units in each area studied, the inferred effects must be largely empirical and generalized. Therefore, the inferences are based in large part upon the effects of past major earthquakes in Alaska and elsewhere, particularly upon the well-documented effects of the Alaska earthquake of March 27, 1964. Buildings, highways, bridges, tunnels, harbor facilities, pipelines, canals, and other manmade structures may be severely damaged or destroyed by fault displacement or related tectonic land-level changes in southeastern Alaska. Direct damage from fault rupture would be restricted virtually to structures built directly athwart the fault. In California and Nevada, fault rupture almost always accompanies shocks of magnitude 6.5 or greater. The Alaska earthquake of March 27, 1964, and the Chilean earthquake of May 22, 1960, dramatically illustrated the severe adverse effects that can result from uplift or subsidence over a wide area. The variable most responsible for the degree of shaking at any epicentral distance is the type of ground. Generally, shaking is considerably greater in poorly consolidated deposits than in hard bedrock, particularly if the deposits are water saturated. Severe shaking of alluvial deposits and manmade fill, with resultant heavy damage, is well documented from the records of many past earthquakes. Damage commonly has been heavy as a result of ground settlement caused by compaction of loose sediments by shaking during an earthquake. This has been especially true where compaction was accompanied by tectonic downdrop of land, such as occurred during the Chilean earthquake of 1960 and the Alaska earthquake of 1964. Loosely emplaced manmade fill, deltaic deposits, beach deposits, and alluvial deposits may be susceptible to compaction in southeastern Alaska during a severe earthquake. Liquefaction of sand and silt is a fairly common effect of large earthquakes. It was well illustrated at Niigata, Japan, during the earthquake of June 16, 1964, and resulted in extensive damage. When part of a sloping soil mass liquefies, the entire mass can undergo catastrophic failure and can flow as a high-density liquid. In southeastern Alaska, deltaic deposits probably would be most susceptible to liquefaction. Sensitive and quick clays, which lose a considerable part of their strength when shaken, commonly fail during an earthquake and become rapid earthflows. Extensive studies were made of the sensitivity of the Bootlegger Cove Clay at Anchorage because of the marked loss of shear strength and dramatic failures of the deposits during the Alaska earthquake of 1964. If similar sensitive clays are present in some places in southeastern Alaska, they most likely are in some of the emergent fine-grained marine deposits; supporting data to confirm their presence, however, are largely lacking. Records of some 50 major earthquakes show that in at least half of the instances water and sediment have been ejected from surficial deposits Water-sediment ejection and associated subsidence and ground fracturing commonly cause extensive damage to the works of man. Ejecta may fill basements and other low-lying parts of buildings. Agricultural land can be covered with a blanket of infertile soils, and small ponds can be filled or made shallow. In southeastern Alaska these phenomena are most likely to occur on valley floors, deltas, tidal flats, alluvial fans, swamps, and lakeshores. Earthquake-induced sliding on land generally is confined to steep slopes but may take place in fine-grained deposits on moderately to nearly flat surfaces if the deposits are subject to liquefaction. A large rockslide triggered by the Lituya Bay, Alaska, earthquake of July 10, 1958, generated a wave that surged up the opposite wall of the inlet to a record height of 1,740 feet. During the Hebgen Lake, Montana, earthquake of August 17, 1959, a spectacular rockslide plunged into the Madison River canyon, buried 28 people, dammed the river, and created a large lake. Earthquake-records are replete with accounts of sliding of surficial deposits during moderate to large earthquakes. Most or all of the general factors that favor subaerial landsliding are present in southeastern Alaska. Earthquake-induced subaqueous slides can produce adverse effects both nearshore and some distance offshore. Nearshore sliding may progress shoreward and destroy harbor facilities and other structures, commonly with substantial loss of life. Disastrous large submarine slides occurred along the fronts of deltas in Seward and Valdez during the Alaska earthquake of 1964. In similar fashion, the largest submarine slides in southeastern Alaska likely will be triggered along the larger delta fronts. Sliding farther offshore can constitute a threat to navigation because of changes in water depths. Also underwater sliding can break communication cables. Glaciers were not greatly affected by the Alaska earthquake of 1964 despite the fact that about 20 percent of the area that underwent strong shaking is covered by ice. In contrast, the cataclysmic avalanche of ice and rock that fell from a high glacier-covered peak in Peru during the earthquake of May 31, 1970, produced devastating effects downvalley on man and his works in the form of mudflows. Most towns in southeastern Alaska are sufficiently distant from glaciers so as not be to directly affected. Both the Alaska earthquake of 1964 and the Hebgen Lake, Montana, earthquake of 1959 significantly affected ground- and surface-water regimens. Water levels in some wells declined whereas in others flow increased. Some springs discharged at a rate three times as much as normal; flow of others decreased or stopped. Discharge of many streams increased markedly. Most or all of the effects described above could occur in parts of southeastern Alaska during future large earthquakes. Tsunamis, seiches, and other abnormal water waves associated with large earthquakes commonly cause vast property damage and heavy loss of life. Tsunami effects can be devastating to coastal areas as far as many thousands of miles from their generation source. Seiche effects generally are confined to inland bodies of water or to relatively enclosed coastal bodies of water. Abnormal waves generated by submarine sliding or by subaerial sliding into water generally produce only local effects but may be highly devastating. Tsunami waves resulting from the Chilean earthquake of 1960 inflicted extensive damage and loss of life on coastal communities throughout a large part of southern Chile, and significant runups and damage were recorded in many places throughout the Pacific Ocean area. The tsunami waves generated by the Alaska earthquake of 1964 struck with devastating force along a broad stretch of the Alaska coast and produced heavy property damage and loss of life as far away as Crescent City, Calif. Seiche waves generated by that earthquake reached runup heights of 20-30 feet on some lakes in Alaska, and water-level fluctuations were recorded on streams, reservoirs, lakes, and swimming pools in States bordering the Gulf of Mexico. Waves generated by submarine sliding struck violently at a number of places during or immediately after the quake and were the major cause of loss of life and damage to property. Slide-generated waves probably would have a higher destructive potential in southeastern Alaska than either tsunami waves or seiche waves because of their possibly higher local runups and because they can hit the shores almost without warning during or immediately after an earthquake. Nonearthquake-related geologic hazards, although generally far less dramatic than those related to earthquakes, tend to occur so much more frequently or persistently that their aggregate effects can be significant. Three kinds of geologic hazards of this type are discussed: (1) nonearthquake-induced landsliding and subaqueous sliding, (2) flooding, and (3) land uplift. The potential for nonearthquake-triggered landsliding in southeastern Alaska ranges widely from place to place. Past sliding generally furnishes the clue in the prediction of where and in what materials future sliding will occur. Fast-moving rockslides, debris slides, and mudflows can be expected to occur from time to time on steep slopes and be highly destructive to highways, power plants, pipelines, buildings, and other facilities located on a slope or at its base. Present slow downslope movement of talus can be expected to continue at the same general rate unless conditions are changed by man or there are climatic changes. Snow and debris avalanches can be especially hazardous during winter months. Long-inactive landslides may be triggered into renewed activity or new slides may be created by man-induced modifications. Accelerated slope erosion and debris flows may follow large-scale clearing and cutting of timber. Subaqueous sliding can be expected to occur periodically along fronts of deltas and on other oversteepened underwater slopes. Floods have been common in parts of southeastern Alaska because of heavy precipitation and rapid runoff from steep slopes with resulting heavy damage to roads and other facilities. Continued damage can be expected in the future unless more remedial measures are taken. Current uplift of land in southeastern Alaska, although probably not affecting man significantly in a short period of time, may have some adverse long-term effects. These long-term effects should be borne in mind when facilities such as docks and boat harbors are constructed on or near the shore, where there is a critical relation between height of land and water.

Alaska

Geology, hydrology, and water quality in the Fresno area, California

The Fresno area comprises about 1.400 square miles lying west of the foothills of the Sierra Nevada and east of the trough of the San Joaquin Valley. The rainfall averages less than 10 inches per year causing agricultural development to depend mainly on surface-water deliveries and ground-water pumpage. Surface-water deliveries and ground-water pumpage, however, vary considerably from year to year. For example, in agricultural year 1958 (April 1, 1958-March 31, 1959) surface-water deliveries were about 1,340,000 acre-feet and agricultural ground-water pumpage was about 1,740,000 acre-feet, but in agricultural year 1960 deliveries were only about 560,000 acre-feet and pumpage was about 2,520,000 acre-feet. Alluvial fans are the dominant geomorphic features in the area. Small alluvial fans have been formed near the foothills by the deposits from the numerous intermittent streams that lie both north and south of the Kings River. Thicker and much more extensive alluvial fans have been formed under most of the area by deposits from the San Joaquin and Kings Rivers. Geologic units in the area consist of consolidated rocks and unconsolidated deposits. In turn, consolidated rocks consist of basement complex of pre-Tertiary age and marine and continental sedimentary rocks of Cretaceous and Tertiary age. Unconsolidated deposits are of both Tertiary and Quaternary age. Most of the geologic units dip gently southwestward approximately paralleling the back slope of the Sierra Nevada. Although some of these geologic units are faulted, especially in the deep subsurface, faulting has not affected the occurrence and movement of fresh ground water. The basement complex crops out along the eastern border of the area and yields only small amounts of water to wells; the marine and continental sedimentary rocks do not crop out in the area and do not yield any water to wells. The unconsolidated deposits are divided into an older series of Tertiary and Quaternary age, and a younger series of Quaternary age. The continental deposits of Tertiary and Quaternary age crop out beneath the extreme southeastern part of the area and yield small amounts of water to wells, and the deposits of Quaternary age crop out over most of the area and yield more than 90 percent of the water pumped from wells. The deposits of Quaternary age in turn are divided into older alluvium, lacustrine and marsh deposits, younger alluvium, flood-basin deposits. and sand dunes. The older alluvium is by far the most important aquifer in the Fresno area. It consists of intercalated lenses of clay, silt, silty and sandy clay, clayey and silty sand, sand, gravel, cobbles, and boulders, and in general it is fine grained near the trough of the valley and beneath the alluvial fans of intermittent streams. In the older alluvium, yields to wells range from less than 20 gpm (gallons per minute) to more than 3,000 gpm. The lacustrine and marsh deposits occur only in the subsurface in the western part of the area. Consisting mostly of silt and clay, they are virtually impermeable and thus restrict the vertical movement of water. These deposits from oldest to youngest are designated the E-clay, the C-clay, and the A-clay. The E-clay is the thickest and most extensive of all the lacustrine and marsh deposits. Because the clays tend to confine ground water in the Fresno area, five water bodies are recognized. These are the unconfined water body, the shallow water body, the confined water body below the A-clay, the confined water body below the C-clay, and the confined water body below the E-clay. The unconfined water body underlies most of the Fresno area. The shallow and confined water bodies underlie parts of the extreme western part of the area. There, heads in successively underlying water bodies are less than those in overlying water bodies, indicating that some ground water moves slowly downward through the clays. From agricultural years 1957 to 1962, outflow in the area exceeded inflow. As a result, for this period, the Fresno area had a net deficit of about 2,890,000 acre-feet. This deficit was made up for mostly by a decline in ground water stored. Water levels in all water bodies have been declining over the years, yet when streamflow and canal deliveries are large they show a general rise. The general movement of ground water in the Fresno area is toward the southwest, although pumping depressions near Fresno and near the western part of the area, cause ground water to move northward, southward, and westward toward them.

California