Geology ReportsSearch

USGS · 70047244

A progress report on results of test drilling and ground-water investigations of the Snake Plain aquifer, southeastern Idaho: Part 1: Mud Lake Region, 1969-70 and Part 2: Observation Wells South of Arco and West of Aberdeen

Abstract

The results of drilling test holes to depths of approximately 1,000 feet in the Mud Lake region show that a large part of the region is underlain by both sedimentary deposits and basalt flows. At some locations, predominantly sedimentary deposits were penetrated; at others, basalt flows predominated. The so-called Mud Lake-Market Lake barrier denotes a change in geology. From the vicinity of the barrier area, as described by Stearns, Crandall, and Steward (1938, p. 111), up the water-table gradient for at least a few tens of miles, the saturated geologic section consists predominantly of beds of sediments that are intercalated with numerous basalt flows. Downgradient from the barrier, sedimentary deposits are not common and practically all the water-bearing formations are basalt, at least to the depths explored so far. Thus, the barrier is a transition zone from a sedimentary-basaltic sequence to a basaltic sequence. The sedimentary-basaltic sequence forms a complex hydrologic system in which water occurs under water-table conditions in the upper few tens of feet of saturated material and under artesian conditions in the deeper material in the southwest part of the region. The well data indicate that southwest of the barrier, artesian pressures are not significant. Southwest of the barrier, few sedimentary deposits occur in the basalt section and, as described by Mundorff, Crosthwaite, and Kilburn (1964). ground water occurs in a manner typical of the Snake Plain aquifer. In several wells, artesian pressures are higher in the deeper formations than in the shallower ones, but the reverse was found in a few wells. The available data are not adequate to describe the water-bearing characteristics of the artesian aquifer nor the effects that pumping in one zone would have on adjacent zones. The water-table aquifer yields large quantities of water to irrigation wells.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 42° to 45° latitude; -117° to -111° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

E. G. Crosthwaite. 1973. A progress report on results of test drilling and ground-water investigations of the Snake Plain aquifer, southeastern Idaho: Part 1: Mud Lake Region, 1969-70 and Part 2: Observation Wells South of Arco and West of Aberdeen. https://pubs.usgs.gov/publication/70047244

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Water resources of the Weiser River basin, west-central Idaho

The study area comprises about 1,600 square miles (4,100 square kilometers) in west-central Idaho and includes the entire Weiser River basin and small areas both west and south of Weiser outside the basin. The basin is sparsely populated and the economy is chiefly agricultural.

Idaho

Digital-model analysis of the effects of water-use alternatives on spring discharges Gooding and Jerome Counties, Idaho

Springs discharging from the Snake Plain aquifer contribute approximately 6,000 cubic feet per second (170 cubic metres per second) to flow in the Snake River between Milner and King Hill. Before irrigation began on the Snake River Plain north and east of the springs, total spring discharge was about 4,200 cubic feet per second (120 cubic meters per second). Increasing amounts of irrigated acreage from the early 1900's to the mid-1940's contributed more irrigation-return water to the aquifer resulting in increased discharge at the springs. Maximum discharge of about 6,800 cubic feet per second (190 cubic metres per second) occurred during the late 1940's and early 1950's. Increased use of pumped ground water for irrigation and changing irrigation practices have since resulted in a decline in spring discharge.

Idaho

A progress report on results of test drilling and ground-water investigations of the Snake Plain aquifer, southeastern Idaho: Part 3: Lake Walcott-Bonanza Lake area

Direct-current resistivity soundings and exploratory drilling suggest that the basalt of the Snake River Group is relatively thin in the area along the Snake River that is topographically suitable for pumping large quantities of ground water in exchange for surface water. The formations underlying the Snake River Group appear to have low permeability and probably would not yield large amounts of water. Previous studies have indicated that the southern edge of the Snake Plain aquifer extended to the Snake River. Data presented in this report implies that, in general, the southern boundary should, in fact, be several miles north of the river.

Idaho