Geology ReportsSearch

SEARCH · Geology Reports

Results for “International Journal of Coal Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,659 records · Page 20Linked to original sources

Early Miocene volcanic rocks and associated tectonics, Lava Hills and southern Bristol Mountains, California

Volcanic rocks of latest Oligocene to early Miocene age form an east-west belt across part of the central eastern Mojave Desert from the Whipple Mountains on the east to the Rosamond Hills on the west. We term this the central belt because it is separated from northern and southern belts by swaths with no volcanic rocks. Limited geochronologic data indicate that much of the belt is latest Oligocene and early Miocene in age, about 24 to 19 Ma, a finding that is consistent with these rocks being overlain by the 18.8 Ma Peach Spring Tuff in many places. We describe Miocene geology in a central area of the belt, in the Lava Hills, southern Bristol Mountains, and southern Old Dad Mountains. Sedimentary basins formed coeval with early andesite to rhyolite volcanism, progressing from fluvial and lacustrine tuffaceous sandstone to volcanic lavas, tuffs, and breccias, indicating that early basins formed proximal to volcanic edifices. Higher strata are fluvial and lacustrine with lavas punctuating the sequence. Although basins may partly have been formed within topographic lows bounded by volcanic domes, plateaus, and stratovolcanoes, consistent stratigraphic sections over wide areas indicate that tectonic basin evolution affected broad areas. The volcanic section is capped by local basalt flows and the regional Peach Spring Tuff. Limited data on normal faults support interpretations of early extensional basin development caused by northeast-southwest oriented stretching. Later extension caused stratal rotations, tilting early deposits down to the southwest. This tilted and subsequently beveled basin architecture was overlain by the youngest volcanic deposits, primarily rhyolite and basalt. The Peach Spring Tuff, 18.8 Ma, lies within this upper unit. Similar stratigraphic and structural relations are exposed in the nearby Marble Mountains and Van Winkle Mountain sections, reinforcing that a broad area underwent similar volcanism and tectonism. In our study area the upper unit is only very gently tilted except near dextral strike-slip faults of the eastern California shear zone. These late Miocene to Recent faults are represented as four main fault zones spaced about 5 km apart, representing distributed shear north of the Bristol Lake basin.

California

Layered intrusions in the Precambrian: Observations and perspectives

Layered intrusions are plutonic bodies of cumulates that form by the crystallization of mantle-derived melts. These intrusions are characterized by igneous layering distinguishable by shifts in mineralogy, texture, or composition. Layered intrusions have been fundamental to our understanding of igneous petrology; however, it is their status as important repositories of critical metals – such as platinum-group elements, chromium, and vanadium – that has predominantly driven associated research in recent decades. Many layered intrusions were emplaced during the Precambrian, predominantly at the margins of ancient cratons during intervals of supercontinent accretion and destruction. It appears that large, layered intrusions require rigid crust to ensure their preservation, and their geometry and layering is primarily controlled by the nature of melt emplacement. Layered intrusions are best investigated by integrating observations from various length-scales. At the macroscale, intrusion geometries can be discerned, and their presence understood in the context of the regional geology. At the mesoscale, the layering of an intrusion may be characterized, intrusion-host rock contact relationships studied, and the nature of stratiform mineral occurrences described. At the microscale, the mineralogy and texture of cumulate rocks and any mineralization are elucidated, particularly when novel microtextural and mineral chemical datasets are integrated. For example, here we demonstrate how mesoscale observations and microscale datasets can be combined to understand the petrogenesis of the perplexing snowball oiks outcrop located in the Upper Banded Series of the Stillwater Complex. Our data suggest that the orthopyroxene oikocrysts did not form in their present location, but rather formed in a dynamic magma chamber where crystals were transported either by convective currents or within crystal-rich slurries. Critical metals may be transported to the level of a nascent intrusion as dissolved components in the melt. Alternatively, ore minerals are entrained from elsewhere in a plumbing system, potentially facilitated by volatile-rich phases. There are many ore-forming processes propounded by researchers to occur at the level of emplacement; however, each must address the arrival of the ore mineral, its concentration of metals, and its accumulation into orebodies. In this contribution, several of these processes are described as well as our perspectives on the future of layered intrusion research.

Precambrian Research

Geophysical modeling of a possible blind geothermal system near Battle Mountain, NV

The northeastern portion of the Reese River basin in north-central Nevada is the focus of detailed geophysical and geological studies as part of the INGENIOUS project, which aims to identify new, commercially viable hidden geothermal systems in the Great Basin region of the western U.S. This location, herein referred to as Argenta Rise, occupies a broad (~15km wide) left-step between major range-front fault systems along the northwestern edge of the Shoshone Range and Argenta Rim, with numerous ENE-striking intra-basin faults presumably accommodating sinistral-normal oblique slip across the step-over. Four discrete regions have been identified within the study area that have favorable structural settings for hosting a blind hydrothermal system. However, with no definitive or extensive surface manifestations of an active hydrothermal system (e.g., geysers, steam vents, sinter, etc.), detailed geophysical studies are necessary to resolve subsurface geology and structure, and identify zones of enhanced structural complexity that may promote hydrothermal fluid flow. Hence, we collected high-resolution gravity, MT, and rock property data (density, magnetic susceptibility), and analyzed the recently acquired GeoDAWN aeromagnetic data to characterize potential geothermal resources in this region. Using the new geophysical datasets, we jointly modeled gravity and magnetic data along a series of intersecting 2D profiles that integrated information from recent, local-scale fault mapping. Rock property measurements performed on outcrops and hand samples throughout the study area constrained the models. The MT data were used to construct a 3D resistivity model that highlights the location of inferred alteration and fluids in the subsurface. Combined MT and potential field results reveal which structures may be most important for controlling hydrothermal fluid migration, as well as which geologic units may host hydrothermal fluids. Our gravity derived depth to basement surface coincides well with the base of shallow conductive anomalies, suggesting hydrothermal fluids may be confined to basin fill sediments and volcanics. This work supports our development of 3D geophysical and geologic models that are focused along the western flank of the northern Shoshone Range and aids the process of selecting sites for temperature gradient drilling.

Nevada

James Buttle review: The characteristics of baseflow resilience across diverse ecohydrological terrains

The dynamic storage of aquifers is the portion of groundwater that can potentially drain to any given point along a stream to create baseflow. Baseflow typically occurs year-round in perennial streams, though the characteristics and stability of dynamic storage are often most important to instream processes during extended dry periods (without precipitation and snowmelt) when runoff and quickflows are minimised. The term ‘baseflow resilience’ is defined for this review as the tendency of baseflow in streams to maintain a consistent volume and water quality year to year while under stress from climate variability and extremes, along with anthropogenic stressors such as water withdrawals, land use change, and water quality degradation. ‘Baseflow resilience’ has, in part, a user-defined meaning spanning water supply and water quality variables of primary interest. Watershed characteristics that directly impact resilience can often produce non-intuitive feedbacks that enhance some attributes of baseflow while simultaneously impairing others. For example, permeable stream corridor geology creates strong stream-groundwater hydrologic connectivity, yet fast groundwater drainage via preferential high-permeability flowpaths can lead to streamflow not being sustained during extended dry periods. Also, shallow groundwater sources are generally more immediately vulnerable to extreme events, warming, salinization, transpiration, and precipitation drought, compared to deeper groundwater. Yet baseflow drought in streams influenced by deeper groundwater can lag precipitation drought by years, and contaminant legacies may propagate through deep groundwater flowpaths to receiving waters for decades to centuries. Finally, irrigation withdrawals can intercept groundwater that would have drained to streams, and the application of irrigation may leach contaminants from the soil zone by unnaturally raising water tables, yet irrigation return flows can sustain baseflow and groundwater-dependent habitats in semiarid areas. This review covers the concept of hydrologic resilience in the context of stream baseflow processes and summarises the common hydrogeological controls on, and multiscale stressors of, dynamic groundwater storage. Further, we present several quantitative metrics to assess a range of water supply to water quality baseflow characteristics using both broadly available and boutique data types, a subset of which are demonstrated using data from the Delaware River Basin, USA.

Delaware River Basin

Seabed maps showing topography, ruggedness, backscatter intensity, sediment mobility, and the distribution of geologic substrates in quadrangle 2 of the Stellwagen Bank National Marine Sanctuary region offshore of Boston, Massachusetts

The U.S. Geological Survey, in cooperation with the National Marine Sanctuary Program of the National Oceanic and Atmospheric Administration, has conducted seabed mapping and related research in the Stellwagen Bank National Marine Sanctuary (SBNMS) region since 1993. The area being mapped using geophysical and geological data includes the SBNMS and the surrounding region, which totals approximately 3,700 square kilometers (km 2 ) and is subdivided into 18 quadrangles. The seabed is a glaciated terrain that is topographically and texturally diverse. Quadrangle 2, the subject of this scientific investigations map, has a mapped area of 209 km 2 and has water depths that range from about 19 meters (m) on the Stellwagen Bank crest to about 68 m in the Stellwagen Basin. Seven map types, each at a scale of 1:25,000, depict seabed topography, ruggedness, backscatter intensity, distribution of geologic substrates, sediment mobility, distribution of fine- and coarse-grained sand, and substrate mud content. These maps show the distribution of geologic substrates across the southwestern part of Stellwagen Bank, in Stellwagen Basin to the west and southwest of the bank, and in Little Stellwagen Basin and the western part of Race Point Channel to the south of the bank. Interpretations of multibeam sonar bathymetric and seabed backscatter imagery, photographs, video imagery, and grain-size analyses were used to create the geology-based maps. Data from 733 stations were analyzed, including 656 sediment samples. The geologic substrate maps of quadrangle 2 show the distribution of 19 geologic substrates that represent a wide range of textures, such as rippled and immobile sand, immobile muddy sand and sandy mud, sand that partially veneers gravel, and a boulder ridge. Mapped substrates are characterized by sediment grain-size composition, surface morphology, substrate layering, the mobility or immobility of substrate surfaces, and water depth range. This scientific investigations map portrays the major geological elements (substrates, topographic features, and processes) of environments in quadrangle 2. It is intended to provide a foundation for research into present and past sediment transport processes in a complex terrain, provide insights into the ecological requirements of invertebrate and vertebrate species that utilize the various substrates, and support seabed management in the region.

Massachusetts

Update of the 2008 provisional Enhanced Geothermal Systems (EGS) assessment for the Great Basin, USA

In response to the Energy Act of 2020, the U.S. Geological Survey (USGS) is updating the Enhanced Geothermal Systems (EGS) resource assessment for the Great Basin, USA. The previous 2008 provisional assessment estimated how much electricity could be generated from EGS resources of the western United States using models of electric-grade heat, models of heat extraction over time, and estimates of how much rock might be stimulated to produce viable amounts of heat. Herein, a similar conceptual strategy is applied, using updated models of heat extraction as a function of fracture spacing and well distance. Previously used reservoir heat delivery models are updated to have a dependence on fracture and well spacing, potentially improving future estimates of EGS resources as ongoing research provides a better understanding about the success of reservoir stimulation as a function of geology and location. For a range of well distances (250-1000 m) and fracture spacings (1-50 m), heat extraction efficiency ranges from 25-62%, demonstrating the importance of accounting for the most likely results of proven viable fracturing technologies. Although fracturing is important, the biggest uncertainty by far in estimating the EGS resource for the Great Basin is estimating which geologic units at what depths can be stimulated sufficiently to produce geothermal energy economically and efficiently. Uncertainties in these factors yield estimates that range over two orders of magnitude with an upper limit of ~174 terawatts-thermal (TWth) produced for 30 years from the upper 7 km of the crust. This upper limit would require significant technological advances to access most of the electric-grade resource across the Great Basin. Assuming that 1% of this estimate will be accessible in the next few decades gives a resource estimate similar to that made in the 2008 provisional assessment. These estimated EGS heat extraction rates far exceed ( greater than 100x) the natural geothermal heat production rate, thus geothermal electricity production at these rates might not be sustainable unless heat is also recharged from other sources (e.g., excess solar energy when supply exceeds demand). In addition to assessment maps and cumulative estimates, the new models of fractured reservoirs developed herein can be used to estimate steady power production given a set of fractures and well spacing, and estimates can be made for setback distances to ensure no thermal interference with nearby powerplants.

Arizona, California, Idaho, Nevada, Oregon, Utah

Estimating the probability of elevated nitrate (NO2+NO3-N) concentrations in ground water in the Columbia Basin Ground Water Management Area, Washington

Logistic regression was used to relate anthropogenic (man-made) and natural factors to the occurrence of elevated concentrations of nitrite plus nitrate as nitrogen in ground water in the Columbia Basin Ground Water Management Area, eastern Washington. Variables that were analyzed included well depth, depth of well casing, ground-water recharge rates, presence of canals, fertilizer application amounts, soils, surficial geology, and land-use types. The variables that best explain the occurrence of nitrate concentrations above 3 milligrams per liter in wells were the amount of fertilizer applied annually within a 2-kilometer radius of a well and the depth of the well casing; the variables that best explain the occurrence of nitrate above 10 milligrams per liter included the amount of fertilizer applied annually within a 3-kilometer radius of a well, the depth of the well casing, and the mean soil hydrologic group, which is a measure of soil infiltration rate. Based on the relations between these variables and elevated nitrate concentrations, models were developed using logistic regression that predict the probability that ground water will exceed a nitrate concentration of either 3 milligrams per liter or 10 milligrams per liter. Maps were produced that illustrate the predicted probability that ground-water nitrate concentrations will exceed 3 milligrams per liter or 10 milligrams per liter for wells cased to 78 feet below land surface (median casing depth) and the predicted depth to which wells would need to be cased in order to have an 80-percent probability of drawing water with a nitrate concentration below either 3 milligrams per liter or 10 milligrams per liter. Maps showing the predicted probability for the occurrence of elevated nitrate concentrations indicate that the irrigated agricultural regions are most at risk. The predicted depths to which wells need to be cased in order to have an 80-percent chance of obtaining low nitrate ground water exceed 600 feet in the irrigated agricultural regions, whereas wells in dryland agricultural areas generally need a casing in excess of 400 feet. The predicted depth to which wells need to be cased to have at least an 80-percent chance to draw water with a nitrate concentration less than 10 milligrams per liter generally did not exceed 800 feet, with a 200-foot casing depth typical of the majority of the area.

Washington

Seabed maps showing topography, ruggedness, backscatter intensity, sediment mobility, and the distribution of geologic substrates in quadrangle 3 of the Stellwagen Bank National Marine Sanctuary region offshore of Boston, Massachusetts

The U.S. Geological Survey, in cooperation with the National Marine Sanctuary Program of the National Oceanic and Atmospheric Administration, has conducted seabed mapping and related research in the Stellwagen Bank National Marine Sanctuary (SBNMS) region since 1993. The area being mapped using geophysical and geological data includes the SBNMS and the surrounding region, which totals approximately 3,700 square kilometers (km 2 ) and is subdivided into 18 quadrangles. The seabed is a glaciated terrain that is topographically and texturally diverse. Quadrangle 3, the subject of this scientific investigations map, has a mapped area of 185 km 2 and has water depths that range from about 30 meters (m) on the Stellwagen Bank crest to about 135 m in a basin east of South Ninety Bank, which lies off the eastern margin of Stellwagen Bank. Seven map types, each at a scale of 1:25,000, depict seabed topography, ruggedness, backscatter intensity, distribution of geologic substrates, sediment mobility, distribution of fine- and coarse-grained sand, and substrate mud content. These maps show the distribution of geologic substrates on the southeastern part of Stellwagen Bank, on adjacent banks and basins in deeper water to the east, in the eastern part of Race Point Channel to the south of the bank, and on the northern slope of Cape Cod. Interpretations of multibeam sonar bathymetric and seabed backscatter imagery, photographs, video imagery, and grain-size analyses were used to create the geology-based maps. Data from 309 stations were analyzed, including 279 sediment samples. The geologic substrate maps of quadrangle 3 show the distribution of 21 geologic substrates that represent a wide range of textures, such as rippled sand, immobile sand, immobile muddy sand, sand that partially veneers gravel, and boulder ridges. Mapped substrates are characterized by sediment grain-size composition, surface morphology, substrate layering, the mobility or immobility of substrate surfaces, and water depth range. This scientific investigations map portrays the major geological elements (substrates, topographic features, and processes) of environments in quadrangle 3. It is intended to provide a foundation for research into present and past sediment transport processes in a complex terrain, provide insights into the ecological requirements of invertebrate and vertebrate species that use the various substrates, and support seabed management in the region.

Quadrangle 3 of the Stellwagen Bank National Marin

Bedrock geologic map of the Woodstock quadrangle, Grafton County, New Hampshire

The bedrock geology of the Woodstock 7.5-minute quadrangle consists of highly deformed metasedimentary rocks of the Central Maine trough, including the Silurian Rangeley and Perry Mountain Formations and the Devonian Littleton Formation. The central, northern, and eastern parts of the quadrangle are underlain by the oldest rocks in the area, the Rangeley Formation. In the southwest and south-central part of the quadrangle, metaturbidites of the Perry Mountain Formation and subsequent Littleton Formation overly the Rangeley Formation in a deformed F 1 synform, herein informally called the Bagley Brook basin. The metasedimentary rocks were intruded by widespread syn- to post-tectonic granitoids of the Devonian New Hampshire Plutonic Suite and minor post-metamorphic Jurassic-Cretaceous mafic dikes of the White Mountain Plutonic-Volcanic Suite. The metasedimentary rocks were affected by at least two episodes of deformation in the Devonian Acadian orogeny. The dominant regional foliation is second-generation (S 2 /D 2 ) and formed during the development of sillimanite-muscovite mineral assemblages. Large bodies of the Early Devonian Kinsman Granodiorite intruded the metasedimentary rocks semi-concordantly during D 2 deformation. Dikes of the Late Devonian Concord Granite cut the Kinsman Granodiorite and the metasedimentary rocks and were emplaced either syn- or post-D 2 . The map pattern in the Rangeley Formation is dominated by northeast to northwest trending, moderately to steeply north-dipping F 2 and F 3 folds. Map-scale F 1 folds are defined by the Bagley Brook basin. Previous division of Rangeley Formation stratigraphy in this region into “upper” and “lower” parts was not corroborated by 1:24,000-scale mapping of lithodemic units, and rocks previously mapped as part of the Smalls Falls and Madrid Formations are here reassigned to the Rangeley Formation. Some rocks previously mapped as the lower part of the Littleton Formation are now assigned to the Perry Mountain Formation. The Littleton Formation on this map is approximately equivalent to rocks previously mapped as the upper part of the same formation. Steeply dipping fractures in the quadrangle show a preferred northeast orientation, consistent with subsurface fracture orientations in the well fields near Mirror Lake. Jurassic-Cretaceous mafic dikes and normal faults show preferred northeast orientations, similar to the fractures, suggesting that the extensional stress field that controlled dike orientation during the Mesozoic also produced the dominant brittle fabrics in the area.

New Hampshire

Land-use interactions, Oil-Field infrastructure, and natural processes control hydrocarbon and arsenic concentrations in groundwater, Poso Creek Oil Field, California, USA

Like many hydrocarbon production areas in the U.S., the Poso Creek Oil Field in California includes and is adjacent to other land uses (agricultural and other developed lands) that affect the hydrology and geochemistry of the aquifer overlying and adjacent to oil development. We hypothesize that the distributions of hydrocarbons and arsenic in groundwater in such areas will be controlled by complex interactions between mixed land uses, oil-field infrastructure, and natural processes. In 2020–2021, samples of groundwater and surface water were collected and analyzed for a large suite of inorganic and organic chemicals and isotope and gas tracers to test this hypothesis. Those data are supplemented with ancillary data on historical geochemistry, hydrology, geology, and oil-field infrastructure. Hydrocarbons in groundwater (e.g., methane through pentane gases and benzene) are associated with natural processes (e.g., fault offsets or transition in sediment depositional environment) and oil-field infrastructure (e.g., fluid-migration pathways associated with uncemented annulus in oil wells or unlined pits). Arsenic concentrations >10 μg per liter (μg/L; maximum concentration 12.9 μg/L) are associated with natural processes in old, high-pH groundwater, and more recent recharge of water from natural and/or engineered recharge processes. Along the southwest margin of the oil field, pumping for drinking-water and irrigation supplies in combination with engineered groundwater recharge produce a depression in groundwater elevations where groundwater with elevated sulfate concentrations from agricultural areas and groundwater with hydrocarbons from the oil field mix to produce a zone of sulfate reduction that removes hydrocarbons and arsenic from groundwater but produces elevated sulfide (S 2- ) concentrations (maximum concentration 29 mg per liter, mg/L). In this study, multiple approaches were required to resolve the overlapping effects of land uses, oil-field infrastructure, and natural processes on the distributions of hydrocarbons and arsenic in groundwater. The combined use of geographic, historical, physical, chemical, isotopic, and other information to constrain processes could be a useful approach for studies in other hydrocarbon-production areas. This is particularly important where land uses affect aquifer hydrology to an extent that causes mixing of groundwaters with different chemical compositions.

California

ECCOE Landsat quarterly Calibration and Validation report—Quarter 1, 2024

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March), 2024. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . This quarterly report is the third to include analysis results for Landsat 9, which was launched in September 2021. The inclusion of Landsat 9 analysis results was dependent on two factors: a complete reprocessing of the Landsat 9 data archive and enough time elapsing to begin formulating lifetime trends. In April 2023, all Landsat 9 image data acquired since the satellite’s launch were reprocessed to take advantage of calibration updates identified by the ECCOE Landsat Cal/Val Team. Additional information about the Landsat 9 reprocessing effort is available at https://www.usgs.gov/landsat-missions/news/upcoming-reprocessing-all-landsat-9-data . Additional information about Landsat 9 prelaunch, commissioning, and early on-orbit imaging performance is available at https://www.mdpi.com/journal/remotesensing/special_issues/15B4V2K92K . This quarterly report is the first to not include analysis results for Landsat 7 because Enhanced Thematic Mapper Plus imaging was suspended on January 19, 2024, after the satellite transitioned into full sunlight. The satellite has been drifting since early 2022 after being lowered from the nominal orbit altitude, and the transition into full sunlight is a result of the satellite operating in its extended science mission. Additional information about the imaging suspension is available at https://www.usgs.gov/landsat-missions/news/landsat-7-imaging-suspended . Additional information about the Landsat 7 extended science mission is available at https://www.usgs.gov/landsat-missions/landsat-7-extended-science-mission .

Open-File Report

ECCOE Landsat quarterly Calibration and Validation report—Quarter 2, 2024

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June) of 2024. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . This is the fourth quarterly report to include analysis results for Landsat 9, which was launched in September 2021. The inclusion of Landsat 9 analysis results was dependent on two factors: a complete reprocessing of the Landsat 9 data archive and enough time elapsing to begin formulating lifetime trends. In April 2023, all Landsat 9 image data acquired since the satellite’s launch were reprocessed to take advantage of calibration updates identified by the ECCOE Landsat Cal/Val Team. Additional information about the Landsat 9 reprocessing effort is available at https://www.usgs.gov/landsat-missions/news/upcoming-reprocessing-all-landsat-9-data . Additional information about Landsat 9 prelaunch, commissioning, and early on-orbit imaging performance is available at https://www.mdpi.com/journal/remotesensing/special_issues/15B4V2K92K . This is the second quarterly report that does not include analysis results for Landsat 7 because Enhanced Thematic Mapper Plus imaging was suspended on January 19, 2024, after the satellite transitioned into full sunlight. The satellite has been drifting since early 2022 when it was lowered from the nominal orbit altitude, and the transition into full sunlight is a result of the satellite operating in its extended science mission. Additional information about the imaging suspension is available at https://www.usgs.gov/landsat-missions/news/landsat-7-imaging-suspended . Additional information about the Landsat 7 extended science mission is available at https://www.usgs.gov/landsat-missions/landsat-7-extended-science-mission .

Open-File Report

Ground-water quality atlas of Oakland County, Michigan

The U.S. Geological Survey (USGS), in cooperation with Oakland County Health Division (OCHD), collected 140 water samples from 38 wells in Oakland County during 1998 to better understand ground-water quality. OCHD had observed temporal variations in concentrations of various constituents, so two additional sets of samples were collected to evaluate potential short-term variability related to sample collection procedures and long-term seasonal variability. Replicate samples from 28 wells were analyzed in the Michigan Department of Environmental Quality (MDEQ) Drinking Water Laboratory to compare MDEQ’s analytical results to those obtained from the USGS National Water Quality Laboratory. Several additional databases describing population, land use, water supply, soils, geology, and flows of ground water and surface water are presented in the first part of the report to assist in interpreting the water-quality data. Maps created from these databases are provided in the first portion of the report as an extension of the study-area description. The U.S. Environmental Protection Agency (USEPA) has established Maximum Contaminant Levels (MCL) and Secondary Maximum Contaminant Levels (SMCL) for which samples were analyzed in this study. Water from the 38 wells sampled by the USGS did not exceed the SMCL or MCL for sulfate, fluoride, or nitrite. However, water from 26 wells exceeded the SMCL for iron, water from 12 wells exceeded the SMCL for manganese, and water from 12 wells exceeded the SMCL for dissolved solids. Water from two wells exceeded the MCL for nitrate, although nitrate concentrations in water from most wells was below the detection limit. Water from seven wells exceeded the SMCL for chloride, and water from all wells contained detectable concentrations of chloride. Water from five wells exceeded the MCL for arsenic, and most of the wells sampled contained detectable concentrations of arsenic. These five wells were identified from previous MDEQ analyses to have elevated arsenic concentrations, and were sampled to obtain additional chemistry information. Replicate samples were collected from 26 of the 38 wells for analysis at the MDEQ Drinking-Water Laboratory to compare the results with the USGS National Water Quality Laboratory. The results of the replicate analyses indicate close agreement between the laboratories, with mean differences for nitrate, chloride, and arsenic of 0.10 milligrams per liter (mg/L) as nitrogen, 6.8 mg/L, and 0.0008 mg/L, respectively between the USGS and MDEQ analyses. Potential health effects associated with ingesting nitrate, chloride, and arsenic are provided with the water-quality data, along with references for further information.

Michigan

Generalized potentiometric maps of the Fort Union, Hell Creek, and Fox Hills aquifers within the Standing Rock Reservation

Generalized potentiometric surfaces of the Fort Union, Hell Creek, and Fox Hills aquifers were constructed to assess the groundwater resources of the Standing Rock Reservation. Additionally, this information can provide water managers with tools and data to effectively manage water resources in the future. Previous studies that mapped the geology and hydrogeology of the area at differing scales were used to confirm in which aquifer the study wells were completed. Water-level data from wells are provided by the U.S. Geological Survey Groundwater System Inventory database, the South Dakota Department of Agriculture and Natural Resources, and the North Dakota Department of Water Resources. Hydrographs were constructed for five selected observation wells to evaluate historical water-level fluctuations and trends. Hydrographs for the Hell Creek aquifer showed a flat trend with a rise in 2020. Hydrographs for the deeper Fox Hills aquifer showed that water levels fluctuated in response to climatic conditions and demonstrated an increasing trend in water-level elevations starting in 2010. Hydrographs were not constructed for any wells completed in the Fort Union Formation because none of the wells had continuous long-term measurements. Generalized potentiometric surfaces, constructed from interpolating water-level elevations, gave insight into groundwater flow directions. Groundwater in the Fort Union aquifer likely flows radially outward from the northwest part of the study area to the northeast and south-southeast parts. Groundwater in the Hell Creek aquifer generally flows from higher elevations in the northwest towards lower areas, where surface-water tributaries have incised into the aquifer. Groundwater in the Fox Hills aquifer likely flows from higher elevations in the west, southwest, and central parts of the study area towards the valleys of the Grand River and Missouri River. Most wells used for constructing potentiometric maps had only one recorded water-level measurement from drillers at the time of well construction. These measurements are often subject to error because the well is still recovering and because of spatial limitations of data availability. Also, because single water-level measurements were recorded at different points in time, additional uncertainty is introduced by fluctuating climatic conditions effect on water levels. Potentiometric map interpretation limitations are a result of areas with sparse data. Limitations also arise from potentiometric surfaces generalizing a complex and dynamic hydrogeologic system; however, the generalized potentiometric surface maps can be used to assist water managers and can help prioritize locations for future monitoring in areas with high uncertainty from sparse existing data.

North Dakota, South Dakota

The Europa Imaging System (EIS) investigation

The Europa Imaging System (EIS) consists of a Narrow-Angle Camera (NAC) and a Wide-Angle Camera (WAC) that are designed to work together to address high-priority science objectives regarding Europa’s geology, composition, and the nature of its ice shell. EIS accommodates variable geometry and illumination during rapid, low-altitude flybys with both framing and pushbroom imaging capability using rapid-readout, 8-megapixel (4k × 2k) detectors. Color observations are acquired using pushbroom imaging with up to six broadband filters. The data processing units (DPUs) perform digital time delay integration (TDI) to enhance signal-to-noise ratios and use readout strategies to measure and correct spacecraft jitter. The NAC has a 2.3° × 1.2° field of view (FOV) with a 10-μrad instantaneous FOV (IFOV), thus achieving 0.5-m pixel scale over a swath that is 2 km wide and several km long from a range of 50 km. The NAC is mounted on a 2-axis gimbal, ±30° cross- and along-track, that enables independent targeting and near-global (≥90%) mapping of Europa at ≤100-m pixel scale (to date, only ∼15% of Europa has been imaged at ≤900 m/pixel), as well as stereo imaging from as close as 50-km altitude to generate digital terrain models (DTMs) with ≤4-m ground sample distance (GSD) and ≤0.5-m vertical precision. The NAC will also perform observations at long range to search for potential erupting plumes, achieving 10-km pixel scale at a distance of one million kilometers. The WAC has a 48° × 24° FOV with a 218-μrad IFOV, achieving 11-m pixel scale at the center of a 44-km-wide swath from a range of 50 km, and generating DTMs with 32-m GSD and ≤4-m vertical precision. The WAC is designed to acquire three-line pushbroom stereo and color swaths along flyby ground-tracks.

Space Science Reviews

Geophysical identification of potential groundwater – surface water interactions in the Bonita Peak Mining District, San Juan County, Colorado

This report includes the results and interpretation of geophysical investigations to aid in the location, identification, and conceptual site model (CSM) development of the near surface groundwater and surface water hydrology of the Upper Cement Creek and California Gulch of the Animas Rivers within the Bonita Peak Mining Districts (BPMD). Mine influenced water (MIW) from numerous mine adits within the BPMD has altered the geochemistry and ecology of these ground and surface waters. Many studies of varying scales have investigated the geology, hydrogeology, geochemistry, and aqueous chemistry of these adits and impacted areas. Field investigations using non-invasive geophysical methods were conducted in the summer of 2019 to aid in identifying potential groundwater inputs to these streams and further the CSM of the near surface within and along these streams. Two field deployments were completed in August and September of 2019. In August 2019, Phase 1 was completed using multifrequency electromagnetic induction (EMI) and thermal infrared imaging (TIR) to measure the bulk electrical conductivity, magnetic susceptibility, and the temperature response at known and suspected groundwater seeps into the Upper Cement Creek and California Gulch stretches of these alpine streams. Results and interpretation from Phase 1 were used to co-locate stretches of these streams for further detailed fiber optic distributed temperature system (FODTS) monitoring of the temperature dynamics for submeter identification of potential groundwater seeps during Phase 2. Phase 2 included additional EMI measurements, FODTS measurements, and repeated some Phase 1 measurements for improved data quality. All these data were used for the combined qualitative interpretation identifying seep locations. The data from both Phase 1 and Phase 2 are available in the USGS data release at: https://www.sciencebase.gov/catalog/item/5f18a30082cef313ed84879b. These data include detailed near-surface electrical conductivity and magnetic susceptibility mapping, discrete TIR imaging, and several kilometers of FODTS data. These data were georeferenced and used to identify potential groundwater seeps into these streams. The results indicate a complex near surface geophysical and hydrogeologic regime. Seeps are classified and spatially correlated to the EMI, TIR, and geochemical sampling results. This report is a thorough compilation of the geophysical field efforts in the summer of 2019, the data processing, and interpretations of these data. These data alone should not be used for final interpretations of the complex hydrogeology within these alpine systems. Rather, these data should be combined with other known data from various investigations to further refine the CSM and guide decisions for future investigations, watershed protective measures, and other site decisions. Geographical information system (GIS) layers of these results are available to project managers for such integration and combined interpretations.

Colorado

Monitoring marine eruptions

Introduction Submarine volcanoes produce much of the same seismicity and eruptive activity as subaerial volcanoes and can pose hazards to society. Although they can be monitored with similar techniques and methods as described in other chapters of this volume, their submerged location brings unique challenges. This chapter addresses these challenges and provides recommendations for monitoring volcanoes fully or partly in marine environments to meet the capabilities described in other chapters of this volume. The United States and its territories host dozens of submarine volcanoes with most (around 60) in the Commonwealth of the Northern Mariana Islands. Approximately 20 of the Northern Mariana Islands submarine volcanoes are known to be hydrothermally active, and 10 have confirmed eruptions since the 1950s (for example, Baker and others, 2008; Tepp and others, 2019a). Nine of those volcanoes were considered by the National Volcanic Threat Assessment (Ewert and others, 2018) to have a combination of eruptive type and summit depth that poses a higher risk of hazardous eruptions, although only one was listed as a moderate (level 3) threat. Other notable submarine volcanoes of interest to the United States that have historically erupted are Axial Seamount off the Washington State coast, Kamaʻehuakanaloa in Hawaiʻi, and Vailuluʻu seamount in American Samoa. All of these, however, have a low risk of hazards because of their depth (greater than 600 meters below sea level) and eruptive type and so are not included in the National Volcanic Threat Assessment. In addition to submarine volcanoes, the submerged flanks of island volcanoes can also be a source of hazardous submarine eruptions—for example, the 1877 eruption of Mauna Loa, Hawai‘i, in Kealakekua Bay (Wanless and others, 2006). The most notable submarine eruption in recent times was the 2022 eruption of Hunga Tonga–Hunga Haʻapai in Tonga, which was one of the largest eruptions on Earth in the past 100 years. It created a massive volcanic plume, unprecedented shock waves, and far-reaching tsunami (Lynett and others, 2022). Other recent submarine eruptions in the Pacific Ocean Basin have produced subaerial plumes that reached aircraft heights (Carey and others, 2014) and large pumice rafts that can affect marine traffic and harbors (for example, Jutzeler and others, 2014; Kornei, 2019). These examples illustrate the potential hazards of major submarine eruptions. Yet, submarine volcanoes are largely unmonitored, and many eruptions occur that are unnoticed or only identified hours or days afterward. Within U.S. territory, submarine volcanoes in the Northern Mariana Islands have been known to produce eruptive activity that can affect society. Reports from fishermen and other marine vessels in the Northern Mariana Islands have noted underwater explosions, sea-surface discoloration, and bubbling water, all of which are known to be signs of submarine volcanic activity. South Sarigan seamount, located about 160 kilometers (km) north of Saipan, erupted in 2010 from greater than 150 meters below the sea surface, resulting in a gas and ash plume that reached more than 11.9 km into the atmosphere (for example, Searcy, 2013; Embley and others, 2014), high enough to affect international air traffic. Precursory and co-eruptive seismicity was detected on the regional Northern Mariana Islands seismic network (Searcy, 2013) and on global monitoring instruments (Green and others, 2013). Monitoring of submarine volcanoes is best accomplished with marine-based instrumentation, which is also useful for monitoring small island volcanoes that may not have the land area necessary for comprehensive subaerial monitoring. The primary marine-based instrumentation used for submarine volcanoes includes ocean-bottom pressure sensors to assess sea-floor deformation, ocean-bottom seismometers (OBSs) to detect seismicity, and both moored and ocean-bottom hydrophones to detect submarine explosions. Other sensors offer important monitoring data, such as turbidity, temperature, and chemistry of hydrothermal emissions. Marine-based instruments are typically deployed in campaign-style networks with no real-time telemetry owing to cost considerations and technical limitations. However, when necessary, marine instruments can be operated in real time using cables to transmit data to land-based facilities; other technologies for this purpose are in use or in development, such as acoustic transmission from the instrument to a moored buoy (Matsumoto and others, 2016) and a winch-based system with a satellite antenna that is part of the instrument mooring (Matsumoto and others, 2019). Emerging technologies for marine-based monitoring may be considered as part of a future monitoring plan. These technologies include ocean gliders and floats with on-board hydrophones that have been used to record earthquakes and submarine eruptions (for example, Matsumoto and others, 2013; Sukhovich and others, 2015) and fiber-optic cables that have been used as strainmeters to detect earthquakes (for example, Marra and others, 2018; Lindsey and others, 2019). Land-based instruments and satellites can also provide some capability for monitoring submarine volcanoes, but they provide more limited observations than marine-based instrumentation.

Scientific Investigations Report

Unlocking ecological insights from sub-seasonal visible-to-shortwave infrared imaging spectroscopy: The SHIFT campaign

We stand at the threshold of a transformative era in Earth observation, marked by space-borne visible-to-shortwave infrared (VSWIR) imaging spectrometers that promise consistent global observations of ecosystem function, phenology, and inter- and intra-annual change. However, the full value of repeat spectroscopy, the information embedded within different temporal scales, and the reliability of existing algorithms across diverse ecosystem types and vegetation phenophases have remained elusive due to the absence of suitable sub-seasonal spectroscopy data. In response, the Surface Biology and Geology (SBG) High-Frequency Time Series (SHIFT) campaign was initiated during late February 2022 in Santa Barbara County, California. SHIFT, designed to support NASA's SBG mission, addressed mission scoping, scientific advancement, applications development, and community building. This ambitious endeavor included weekly Airborne Visible InfraRed Imaging Spectrometer-Next Generation (AVIRIS-NG) imagery acquisitions for 13 weeks (spanning February 24 to May 29, 2022), accompanied by coordinated terrestrial vegetation and coastal aquatic data collection. We describe the rich datasets collected and illustrate how the complex sub-seasonal patterns of change can be linked to biological science and applications, surpassing insights from multispectral observations. Leveraging open-source processing methods and cloud-based analysis tools, the SHIFT campaign showcases the readiness of the scientific community to harness ecological insights from remotely sensed hyperspectral time series. We provide an overview of SHIFT's goals, data collections, preliminary results, and the collaborative efforts of early career scientists committed to unlocking the transformative potential of high-frequency time series data from space-borne VSWIR imaging spectrometers.

Ecosphere