Update of the 2008 provisional Enhanced Geothermal Systems (EGS) assessment for the Great Basin, USA

Abstract

In response to the Energy Act of 2020, the U.S. Geological Survey (USGS) is updating the Enhanced Geothermal Systems (EGS) resource assessment for the Great Basin, USA. The previous 2008 provisional assessment estimated how much electricity could be generated from EGS resources of the western United States using models of electric-grade heat, models of heat extraction over time, and estimates of how much rock might be stimulated to produce viable amounts of heat. Herein, a similar conceptual strategy is applied, using updated models of heat extraction as a function of fracture spacing and well distance. Previously used reservoir heat delivery models are updated to have a dependence on fracture and well spacing, potentially improving future estimates of EGS resources as ongoing research provides a better understanding about the success of reservoir stimulation as a function of geology and location. For a range of well distances (250-1000 m) and fracture spacings (1-50 m), heat extraction efficiency ranges from 25-62%, demonstrating the importance of accounting for the most likely results of proven viable fracturing technologies. Although fracturing is important, the biggest uncertainty by far in estimating the EGS resource for the Great Basin is estimating which geologic units at what depths can be stimulated sufficiently to produce geothermal energy economically and efficiently. Uncertainties in these factors yield estimates that range over two orders of magnitude with an upper limit of ~174 terawatts-thermal (TWth) produced for 30 years from the upper 7 km of the crust. This upper limit would require significant technological advances to access most of the electric-grade resource across the Great Basin. Assuming that 1% of this estimate will be accessible in the next few decades gives a resource estimate similar to that made in the 2008 provisional assessment. These estimated EGS heat extraction rates far exceed ( greater than 100x) the natural geothermal heat production rate, thus geothermal electricity production at these rates might not be sustainable unless heat is also recharged from other sources (e.g., excess solar energy when supply exceeds demand). In addition to assessment maps and cumulative estimates, the new models of fractured reservoirs developed herein can be used to estimate steady power production given a set of fractures and well spacing, and estimates can be made for setback distances to ensure no thermal interference with nearby powerplants.