Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Technical Note”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources

Identifying overwintering habitat of silver and bighead carp in the lower Mississippi River: Implications for harvesting and population reduction

A total of 41 sites along a 58 mi reach of the Lower Mississippi River (LMR) were surveyed during winter 2022 for invasive carp aggregation.* Sites consisting of scallops closest to the dike-vegetated bank interface with deeper, slow-moving water and consistent access back to the main channel were preferred. Carp avoided strong currents, and there was no trend in depth selection other than avoiding shallow (less than 20 ft) water. In January 2023, recreation-grade sonar (e.g., side-scan and down-imaging) surveys were conducted in the same reach of the LMR to demonstrate the technology and evaluate carp population size at sites with high abundances based on previous surveys. Fish density was estimated to be 32 fish/10,000 yd 3 (95% confidence interval [CI; 31–34]) using down-imaging software, which is the first estimate of assumed bigheaded carp density in the LMR. Additional fish collections are needed to confirm species composition and size abundance provided by sonar technology. Resurveying sites with high carp abundance over a range of river stages would be necessary to fully characterize habitat conditions, evaluate influence of river stage on occupancy duration, and continue to evaluate species composition and mass removal techniques as a management option in the Lower Mississippi River.

Louisiana, Mississippi↗

Raptor nesting near oil and gas development: an overview of key findings and implications for management based on four reports by HawkWatch International

The project was undertaken because of a paucity of information about the possible effects of OG operations and resource management on nesting raptors. BLM raptor management has included stipulations that restricted human activity near raptor nests during the raptor nesting season. The BLM and the Department of Energy (DOE), which provided financial support for the study, seek information that will contribute to enhancing OG extraction operations while providing environmental protection, including raptor conservation. This project used historical data from Utah and Wyoming. The Price, Utah study area, as of 2006, contained more than 1,100 wells, in a nearly uniform distribution at a density of one per quarter section (160-acre spacing). Some development occurred closer to existing nests because the nest sites had not been discovered or because the land is administered by the State of Utah, without these stipulations. The Rawlins, Wyoming study area included more than 4,200 OG wells in 2006. Compared to the Price study area, wells at Rawlins were less regularly distributed; reaching densities of one well per quarter section (160-acre spacing) in some areas, but less dense elsewhere. HWI compiled information from federal bureaus, state agencies, and industry, and determined how to evaluate the effectiveness of spatial and temporal buffer restrictions that have been applied within areas of OG extraction. HWI used the historical data to describe patterns of OG development relative to raptor nests, and to document changes in the distribution and breeding status of raptor nests relative to OG activities. HWI evaluated how these historical datasets were useful for quantifying the relationship between OG development and other human activities and nesting raptors. HWI assessed changes in Ferruginous Hawk (Buteo regalis) nesting success and productivity, and in use of artificial nest structures (ANSs), which had been erected to reduce the use by raptors of OG structures as nest substrates. Also, HWI studied Accipiter species’ use of pinyon– juniper vegetation communities in the Piceance Basin of Colorado, described basic vegetation and landscape characteristics of nests, and offered recommendations about surveying for accipiter hawks in pinyon–juniper landscapes. Please read the HWI reports for details.

BLM Technical Note↗

Bird use of reforestation sites: Influence of location and vertical structure

In the Lower Mississippi Valley, more than 300,000 acres of agricultural land have been reforested in the last 10 years. Planning decisions on how and where to restore forest are complex and usually reflect landowner objectives. However, initial planning decisions may have a large influence on the value of restored stands for birds and other wildlife. Reforestation of small, isolated tracts will likely result in mature forests where reproductive output of breeding birds does not compensate for adult mortality (sink habitats). This may be due to factors such as lower reproductive success near edges (edge effects), insufficient area of habitat to attract colonizing birds (area effects), or restricted population mixing and mating opportunities because of limited dispersal among tracts (isolation effects). Conversely, reforestation adjacent to existing forest increases contiguous forest area and provides areas buffered from agricultural or urban habitats (interior forest core). Bottomland reforestation has historically focused on planting relatively slow-growing tree species, particularly oaks (Quercus spp.). Thus, restoration sites are often dominated by grasses and forbs for up to a decade after tree planting. Grassland birds are the first birds to colonize reforested sites. However, abundance and productivity of grassland birds is generally poor on sites associated with woody vegetation, such as sites adjacent to mature forest. As woody vegetation develops on reforested sites, birds preferring shrub-scrub habitat displace grassland species (Twedt et al. 2002) (fig. 1). Planting faster-growing trees compresses the time for colonization by shrub-scrub birds and the increased vertical stature of these trees attracts forest birds (Twedt and Portwood 1996). Additionally, planting next to existing mature forests creates transitional edges that reduce the detrimental effects of abrupt forest-agriculture interfaces.

Technical Note↗

Progress in data collection and dissemination in water resources – 1974-2014

In the 50 years since the founding of the American Water Resources Association (AWRA), there has been tremendous and likely unforeseen progress in water-re- sources data collection and dissemination. Langford and Doyel (1974) (henceforth L&D) described progress during the decade following the founding of AWRA, and focused their description around seven topics. L&D described the changes as being “more philosophical than technical,” and noted the importance to the water-resources com- munity of the more than 30 Federal Acts or Amendments enacted in the decade. The purpose of this article is to provide an update to L&D by reviewing L&D’s predictions of anticipated changes in water resources data collection and dissemi-nation, providing an overview of some of the drivers of change in the water-resources community in the last 40 years, identifying some key advances in water-resources data collection and dissemination since 1974, and out-lining some important near-term challenges. The overview is necessarily incomplete, but represents one perspective based on years of collaboration throughout the water-resources community.

Water Resources Impact↗

Membership in voluntary organizations on the Colorado Plateau: A reexamination of the technical information quandary

Many scholars note the increasing desire of the public to be involved in the policy process. Others observe, however, that public participation in governance is declining. One possible explanation for this is that people do not know the technical and scientific language that is frequently used in these decision processes. Citizens simply lack the information to participate in a meaningful way. This is what is known as the “technical information quandary” (i.e., how citizen desires for increased participation can be balanced against the increasingly technical nature of public policy). Research on public participation suggests membership in voluntary associations or organizations is positively associated with higher levels of technical policy knowledge. Recreation management on the Colorado Plateau provides an excellent opportunity to examine the relationship between membership in voluntary organizations and the level of policy knowledge. In 1998, we surveyed the public living on the Colorado Plateau to ascertain their level of knowledge of technical terms and their level of participation in voluntary organizations. We found that a variety of factors were related to people's membership in these organizations. In particular, our findings indicate that those with higher levels of knowledge were significantly more likely to be members of voluntary organizations and that this knowledge was most likely to come from the organizations. These findings have important implications for environmental managers, as well as for the voluntary organizations themselves.

Environmental Practice↗

oSCR: A spatial capture–recapture R package for inference about spatial ecological processes

Spatial capture–recapture (SCR) methods have become widely applied in ecology. The immediate adoption of SCR is due to the fact that it resolves some major criticisms of traditional capture–recapture methods related to heterogeneity in detectabililty, and the emergence of new technologies (e.g. camera traps, non‐invasive genetics) that have vastly improved our ability to collection spatially explicit observation data on individuals. However, the utility of SCR methods reaches far beyond simply convenience and data availability. SCR presents a formal statistical framework that can be used to test explicit hypotheses about core elements of population and landscape ecology, and has profound implications for how we study animal populations. In this software note, we describe the technical basis and analytical workflow of oSCR, an R package for analyzing spatial encounter history data using a multi‐session sex‐structured likelihood. The impetus for developing oSCR was to create an accessible and transparent analysis tool that allows users to conveniently and intuitively formulate statistical models that map directly to fundamental processes of interest in spatial population ecology (e.g. space use, resource selection, density and connectivity). We have placed an emphasis on creating a transparent and accessible code base that is coupled with a logical workflow that we hope stimulates active participation in further technical developments.

Ecography↗

QRev—Software for computation and quality assurance of acoustic doppler current profiler moving-boat streamflow measurements—Technical manual for version 2.8

The software program, QRev applies common and consistent computational algorithms combined with automated filtering and quality assessment of the data to improve the quality and efficiency of streamflow measurements and helps ensure that U.S. Geological Survey streamflow measurements are consistent, accurate, and independent of the manufacturer of the instrument used to make the measurement. Software from different manufacturers uses different algorithms for various aspects of the data processing and discharge computation. The algorithms used by QRev to filter data, interpolate data, and compute discharge are documented and compared to the algorithms used in the manufacturers’ software. QRev applies consistent algorithms and creates a data structure that is independent of the data source. QRev saves an extensible markup language (XML) file that can be imported into databases or electronic field notes software. This report is the technical manual for version 2.8 of QRev.

Open-File Report↗

Challenges in observational seismology

Earthquake seismology became a quantitative scientific discipline after instruments were developed to record seismic waves in the late 19th century ( Dewey and Byerly, 1969 ; Chapter 1 by Agnew). Earthquake seismology is essentially based on field observations. The great progress made in the past several decades was primarily due to increasingly plentiful and high-quality data that are readily distributed. Our ability to collect, process, and analyze earthquake data has been accelerated by advances in electronics, communications, computers, and software (see Chapter 85 edited by Snoke and Garcia-Fernandez). Instrumental observation of earthquakes has been carried out for a little over 100 years by seismic stations and networks of various sizes, from local to global scales (see Chapter 87 edited by Lahr and van Eck). The observed data have been used, for example, (1) to compute the source parameters of earthquakes, (2) to determine the physical properties of the Earth's interior, (3) to test the theory of plate tectonics , (4) to map active faults, (5) to infer the nature of damaging ground shaking, and (6) to carry out seismic hazard analysis. Construction of a satisfactory theory of the earthquake process has not yet been achieved within the context of physical laws. Good progress, however, has been made in building a physical foundation of the earthquake source process, partly as a result of research directed toward earthquake prediction. This chapter is intended for a general audience. Technical details are not given, but relevant references and chapters in this Handbook are referred to. The first part of this chapter presents a brief overview of the observational aspects of earthquake seismology, concentrating on instrumental observations of seismic waves generated by earthquakes (i.e., seismic monitoring), and readers are referred to Chapter 49 by Musson and Cecic for noninstrumental observations. A few key developments and practices are summarized by taking a general view, since many national and regional developments have been chronicled in national and institutional reports (see Chapter 79 edited by Kisslinger). In the latter part of this chapter, the nature of seismic monitoring and some challenges in observational seismology are discussed from a personal perspective. Comments of a technical or philosophical nature are given in the Notes at the end of the chapter, and they are referenced by superscript numbers in the text.

International Geophysics↗

Digital Mapping Techniques '05--Workshop Proceedings, Baton Rouge, Louisiana, April 24-27, 2005

Introduction: The Digital Mapping Techniques '05 (DMT'05) workshop was attended by more than 100 technical experts from 47 agencies, universities, and private companies, including representatives from 25 state geological surveys (see Appendix A). This workshop was similar in nature to the previous eight meetings, held in Lawrence, Kansas (Soller, 1997), in Champaign, Illinois (Soller, 1998), in Madison, Wisconsin (Soller, 1999), in Lexington, Kentucky (Soller, 2000), in Tuscaloosa, Alabama (Soller, 2001), in Salt Lake City, Utah (Soller, 2002), in Millersville, Pennsylvania (Soller, 2003), and in Portland, Oregon (Soller, 2004). This year's meeting was hosted by the Louisiana Geological Survey, from April 24-27, 2005, on the Louisiana State University campus in Baton Rouge, Louisiana. As in the previous meetings, the objective was to foster informal discussion and exchange of technical information. It is with great pleasure I note that the objective was successfully met, as attendees continued to share and exchange knowledge and information, and to renew friendships and collegial work begun at past DMT workshops. Each DMT workshop has been coordinated by the Association of American State Geologists (AASG) and U.S. Geological Survey (USGS) Data Capture Working Group, which was formed in August 1996, to support the AASG and the USGS in their effort to build a National Geologic Map Database (see Soller and Berg, this volume, and http://ngmdb.usgs.gov/info/standards/datacapt/). The Working Group was formed because increased production efficiencies, standardization, and quality of digital map products were needed for the database?and for the State and Federal geological surveys?to provide more high-quality digital maps to the public. At the 2005 meeting, oral and poster presentations and special discussion sessions emphasized: 1) methods for creating and publishing map products (here, 'publishing' includes Web-based release); 2) field data capture software and techniques, including the use of LIDAR; 3) digital cartographic techniques; 4) migration of digital maps into ArcGIS Geodatabase format; 5) analytical GIS techniques; 6) continued development of the National Geologic Map Database; and 7) progress toward building and implementing a standard geologic map data model and standard science language for the U.S. and for North America.

Open-File Report↗

Digital mapping techniques '06 - Workshop proceedings

The Digital Mapping Techniques '06 (DMT'06) workshop was attended by more than 110 technical experts from 51 agencies, universities, and private companies, including representatives from 27 state geological surveys (see Appendix A of these Proceedings). This workshop was similar in nature to the previous nine meetings, which were held in Lawrence, Kansas (Soller, 1997), Champaign, Illinois (Soller, 1998), Madison, Wisconsin (Soller, 1999), Lexington, Kentucky (Soller, 2000), Tuscaloosa, Alabama (Soller, 2001), Salt Lake City, Utah (Soller, 2002), Millersville, Pennsylvania (Soller, 2003), Portland, Oregon (Soller, 2004), and Baton Rouge, Louisiana (Soller, 2005). This year's meeting was hosted by the Ohio Geological Survey, from June 11-14, 2006, on the Ohio State University campus in Columbus, Ohio. As in the previous meetings, the objective was to foster informal discussion and exchange of technical information. It is with great pleasure that I note that the objective was successfully met, as attendees continued to share and exchange knowledge and information, and renew friendships and collegial work begun at past DMT workshops. Each DMT workshop has been coordinated by the Association of American State Geologists (AASG) and U.S. Geological Survey (USGS) Data Capture Working Group, the latter of which was formed in August 1996 to support the AASG and the USGS in their effort to build a National Geologic Map Database (see Soller, this volume, and http://ngmdb.usgs.gov/info/standards/datacapt/). The Working Group was formed because increased production efficiencies, standardization, and quality of digital map products were needed for the database - and for the State and Federal geological surveys - to provide more high-quality digital maps to the public. At the 2006 meeting, oral and poster presentations and special discussion sessions emphasized: 1) methods for creating and publishing map products (here, "publishing" includes Web-based release); 2) field data capture software and techniques, including the use of LIDAR; 3) digital cartographic techniques; 4) migration of digital maps into ArcGIS Geodatabase format; 5) analytical GIS techniques; and 6) continued development of the National Geologic Map Database.

Open-File Report↗

Digital Mapping Techniques '10-Workshop Proceedings, Sacramento, California, May 16-19, 2010

The Digital Mapping Techniques '10 (DMT'10) workshop was attended by 110 technical experts from 40 agencies, universities, and private companies, including representatives from 19 State geological surveys (see Appendix A). This workshop, hosted by the California Geological Survey, May 16-19, 2010, in Sacramento, California, was similar in nature to the previous 13 meetings (see Appendix B). The meeting was coordinated by the U.S. Geological Survey's (USGS) National Geologic Map Database project. As in the previous meetings, the objective was to foster informal discussion and exchange of technical information. It is with great pleasure that I note that the objective was again successfully met, as attendees continued to share and exchange knowledge and information, and renew friendships and collegial work begun at past DMT workshops. At this meeting, oral and poster presentations and special discussion sessions emphasized (1) methods for creating and publishing map products ("publishing" includes Web-based release); (2) field data capture software and techniques, including the use of LiDAR; (3) digital cartographic techniques; (4) migration of digital maps into ArcGIS Geodatabase format; (5) analytical GIS techniques; and (6) continued development of the National Geologic Map Database.

Open-File Report↗

Network global navigation satellite system surveys to harmonize American and Canadian datum for the Lake Champlain Basin

Historically high flood levels were observed during flooding in Lake Champlain and the Richelieu River from late April through May 2011. Flooding was caused by record spring precipitation and snowmelt from the third highest cumulative snowfall year on record, which included a warm, saturated late spring snowpack. Flood stage was exceeded for a total of 67 days from April 13 to June 19, 2011. During this flooding, shoreline erosion and lake flood inundation were exacerbated by wind-driven waves associated with local fetch and lake-wide seiche effects. In May 2011, a new water-surface-elevation record was set for Lake Champlain. Peak lake-level water-surface elevations varied at the three U.S. Geological Survey lake-level gages on Lake Champlain in 2011. The May 2011 peak water-surface elevations for Lake Champlain ranged from 103.20 feet above the National Geodetic Vertical Datum of 1929 at the northern end of Lake Champlain (at its outlet into the Richelieu River at Rouses Point, New York) to 103.57 feet above the National Geodetic Vertical Datum of 1929 at the southern end of the Lake in Whitehall, New York. The water-surface elevations for the Richelieu River in Canada are referenced to a different vertical datum than are those in Lake Champlain in the United States, which causes difficulty in assessing real-time flood water-surface elevations and comparing of flood peaks in the Lake Champlain Basin in the United States and Canada. On March 19, 2012, as a result of the flood event of April and May 2011, the Governments of Canada and the United States asked the International Joint Commission to draft a plan of study to examine the causes and the effects of the spring 2011 flooding on Lake Champlain and the Richelieu River and develop potential mitigation measures. Specific challenges noted by the International Lake Champlain-Richelieu River Technical Working Group (established by the International Joint Commission) included harmonization of vertical datums within the drainage basin. Harmonization of the vertical datum discrepancy is needed for flood assessment and future efforts to model the flow of water through the Lake Champlain Basin in the United States and Canada. In April 2015, the U.S. Geological Survey and Environment Canada began a joint field effort with the goal of obtaining precise elevations representing a common vertical datum for select reference marks used to determine water-surface elevations throughout Lake Champlain and the Richelieu River. To harmonize the datum difference between the United States and Canada, Global Navigation Satellite System surveys were completed at nine locations in the Lake Champlain Basin to collect simultaneous satellite data. These satellite data were processed to produce elevations for two reference marks associated with dams and seven reference marks associated with active water-level gages (lake gages in Lake Champlain and streamgages in the Richelieu River) to harmonize vertical datums throughout the Lake Champlain Basin. The Global Navigation Satellite System surveys were completed from April 14 to 16, 2015, at locations ranging from southern Lake Champlain near Whitehall, New York, to the northern end of the Richelieu River in Sorel, Quebec, at its confluence with the St. Lawrence River in Canada. Lake-gage water-surface elevations determined during the 3 days of surveys were converted to water-surface elevations referenced to the North American Vertical Datum of 1988 by using calculated offsets and historical water-surface elevations. In this report, an “offset” refers to the adjustment that needs to be applied to published data from a particular gage to produce elevation data referenced to the North American Vertical Datum of 1988. Offsets presented in this report can be used in the evaluation of water-surface elevations in a common datum for Lake Champlain and the Richelieu River. In addition, the water-level data referenced to the common datum (as determined from the offsets) may be used to calibrate flow models and support future modeling studies developed for Lake Champlain and the Richelieu River.

New York, Quebec, Vermont↗

Three archives of the U. S. Geological Survey's Western Mineral Resources Team

The Western Mineral Resources Team of the U.S. Geological Survey (USGS) has three archives , which hold unpublished or difficult-to-obtain records and literature. The Technical Data Unit in Anchorage, Alaska, holds maps, field notes, and other records of the USGS work in Alaska. The USGS Field Office in Spokane, Washington, houses the more than 5,000 files from Federal government exploration programs that contracted to fund exploration for some commodities from 1950 until 1974. The Latin American Archive in Tucson, Arizona, holds material on Latin American mineral resources collected by the Center for Inter-American Mineral Resources Investigations.

Conference Paper↗

Model weights and the foundations of multimodel inference

Statistical thinking in wildlife biology and ecology has been profoundly influenced by the introduction of AIC (Akaike?s information criterion) as a tool for model selection and as a basis for model averaging. In this paper, we advocate the Bayesian paradigm as a broader framework for multimodel inference, one in which model averaging and model selection are naturally linked, and in which the performance of AIC-based tools is naturally evaluated. Prior model weights implicitly associated with the use of AIC are seen to highly favor complex models: in some cases, all but the most highly parameterized models in the model set are virtually ignored a priori. We suggest the usefulness of the weighted BIC (Bayesian information criterion) as a computationally simple alternative to AIC, based on explicit selection of prior model probabilities rather than acceptance of default priors associated with AIC. We note, however, that both procedures are only approximate to the use of exact Bayes factors. We discuss and illustrate technical difficulties associated with Bayes factors, and suggest approaches to avoiding these difficulties in the context of model selection for a logistic regression. Our example highlights the predisposition of AIC weighting to favor complex models and suggests a need for caution in using the BIC for computing approximate posterior model weights.

Ecology↗

Faults, lineaments, and earthquake epicenters digital map of the Pahute Mesa 30' x 60' quadrangle, Nevada

This map database, identified as Faults, lineaments, and earthquake epicenters digital map of the Pahute Mesa 30' X 60' quadrangle, Nevada, has been approved for release and publication by the Director of the USGS. Although this database has been subjected to rigorous review and is substantially complete, the USGS reserves the right to revise the data pursuant to further analysis and review. Furthermore, it is released on condition that neither the USGS nor the United States Government may be held liable for any damages resulting from its authorized or unauthorized use. This digital map compilation incorporates fault, air photo lineament, and earthquake epicenter data from within the Pahute Mesa 30' by 60' quadrangle, southern Nye County, Nevada (fig. 1). The compilation contributes to the U.S. Department of Energy's Yucca Mountain Project, established to determine whether or not the Yucca Mountain site is suitable for the disposal of high-level nuclear waste. Studies of local and regional faulting and earthquake activity, including the features depicted in this compilation, are carried out to help characterize seismic hazards and tectonic processes that may be relevant to the future stability of Yucca Mountain. The Yucca Mountain site is located in the central part of the Beatty 30' by 60' quadrangle approximately 15 km south of the south edge of the Pahute Mesa quadrangle (fig. 1). The U.S. Geological Survey participates in studies of the Yucca Mountain site under Interagency Agreement DE-AI08-78ET44802. The map compilation is only available on line as a digital database in ARC/INFO ASCII (Generate) and export formats. The database can be downloaded via 'anonymous ftp' from a USGS system named greenwood.cr.usgs.gov (136.177.48.5). The files are located in a directory named /pub/open-file-reports/ofr-96-0262. This directory contains a text document named 'README.1 ST' that contains database technical and explanatory documentation, including instructions for uncompressing the bundled (tar) file. In displaying the compilation it is important to note that the map data set is considered accurate when depicted at a scale of about 1:100,000; displaying the compilation at scales significantly larger than this may result in distortions and (or) mislocations of the data.

Nevada↗

Results of a workshop concerning assessment of the functions of bottomland hardwoods

The U.S. Environmental Protection Agency (EPA) is authorized under Section 404 of the Clean Water Act (33 U.S.C. 1344) to participate in the regulation of the discharge of dredged or fill material into waters of the United States. This regulatory authority is exercised in partnership with the U.S. Army Corps of Engineers, which has responsibility for permit issuance, and in consultation with the U.S. Fish and Wildlife Service and the National Marine Fisheries Service. Through amendments to the original statute, a series of legal actions and court decisions, and the development of operating guidance among the responsible agencies, Section 404 has evolved into the primary mechanism afforded Federal authorities for the protection of wetlands. EPA recognizes the importance of wetlands in achieving the goals of the Clean Water Act, which are to protect and maintain the chemical, physical, and biological integrity of the Nation’s waters. EPA Administrator Lee Thomas has identified wetlands protection as among the highest of Agency priorities. EPA recognizes that bottomland hardwood (BLH) wetlands have vital and unique attributes that, if lost, would severely impact the physical, chemical, and biological integrity of the Nation's waters. As part of a broad program to better protect the Nation's wetlands, EPA has therefore identified bottomland hardwood wetlands as a priority resource requiring special attention on a national basis. Recognizing the importance of implementing an effective, nationally consistent, and scientifically defensible regulatory program, EPA, in October 1984, issued Interim Operating Guidance to its field personnel for implementing the Section 404 regulatory program in bottomland hardwood wetlands. With the goal of improving and finalizing that guidance, EPA is sponsoring a series of workshops designed to answer key questions concerning BLH wetlands, based on the best scientific and technical information currently available. The first two workshops were directed toward summarizing existing scientific and technical knowledge concerning the functions of BLH ecosystems, the characteristics that are important to each function, and the impact of various development activities on those characteristics. The first workshop, which was held in St. Francisville, Louisiana, in December, 1984, examined a wetland zonation concept as a framework for gaining a greater understanding of BLH structure and function. The workshop set out to determine whether characterization of BLH resources as a series of relatively distinct zones, defined by concomitant variation in hydrologic regime, soils, and vegetation, might provide the basis for a useful and scientifically sound regulatory framework. For examp1e, if certain zones are of particular importance to one or more wetland functions that the Clean Water Act was intended to protect, then the zonation concept might be useful from the perspective of how various activities should be regulated. Discussions during the first workshop, however, indicated that the zonation concept provides, at best, only an incomplete picture of the structure and function of BLH ecosystems. In many cases, BLH functions are not limited to or closely correlated with particular zones and, furthermore, many factors other than zone are important determinants of BLH functions. With these responses in mind, the second workshop, held at Lake Lanier, Georgia, in July, 1985, was designed to elicit information on two questions. First, if zones are not an adequate framework for understanding the functions of BLH systems, what characteristics (predictors) can be used to assess the extent to which a particular site performs these functions? And second, what are the impacts of various development activities that often occur in BLH ecosystems on those characteristics and thus on the functions themselves? At the second workshop, individual workgroups dealing with particular subject areas (e.g., hydrology, water quality, fisheries, wildlife, ecosystem processes, and cultural/recreational/economic resources) were able to identify site characteristics that are important determinants of the performance of various functions. For example, the Hydrology Workgroup identified flood storage as one of three major hydrologic functions that BLH ecosystems perform. The workgroup then identified the most important characteristic (e.g., surface area of the site, soil saturation, and others) that determine flood storage and the likely impact of several common activities (e.g., conversion to soybean production and levee construction) on these characteristics. Some of the workgroups also provided estimates of the aggregate impact of activities, acting through all of the characteristics, on certain functions. The workgroups also identified key characteristics that could be used to identify high-value wetlands for various functions. In addition, the workgroups pointed out a number of topics needing further examination and discussion. First, all of the workgroups identified the need to develop the technical basis and information sources to address the problem of cumulative impacts in the regulatory process. Second, most of the workgroups noted the important of contextual variables in assessing the function of a particular site. For example, the location of a BLH site in relationship to other tracts of habitat is an important variable for many wildlife species. Similarly, the extent to which a site retains or transforms contaminants is depended not only on the characteristics of the site, but also on its position in a watershed relative to contaminant inputs. And finally, several of the workgroups pointed out that assessing the impact of an activity on a function is not as simple as "adding up" the impact on individual characteristics, but may depend instead on complex interactions among characteristics. Addressing these questions, as summarized in the objectives and discussions that follow, was the focus of the third workshop, the results of which are described in this report.

Report↗

National Cartographic Information Center Newsletter No. 6

As a rule we don't carry personnel information additions, subtractions, etc., in the newsletter. This is a technical publication, not a forum for office baseball league scores. Now, having got that disclaimer out of the way, we wanted to note that Dick Swinnerton, Chief of NCIC since the Center's inception in 1974, has left us. Dick was recently chosen as Chief of the Topographic Divisions's Western Mapping Center (a move up and, geographically at least, to the left). When Dick arrived NCIC consisted of 4 briefing books and an interesting concept. 3 years later we have 10 books and a thriving organization. We shall miss him. This issue contains what we hope is an interesting collection of cartographic news, including articles about recent Federal mapping agreements, new publication announcements, notes on the second NCIC coordinating conference, and a cumulative index for the spring 1975 to summer 1977 issues.

Newsletter↗

Review of USGS Open-file Report 95-525 ("Cartographic and digital standard for geologic map information") and plans for development of Federal draft standards for geologic map information

This report summarizes a technical review of USGS Open-File Report 95-525, 'Cartographic and Digital Standard for Geologic Map Information' and OFR 95-526 (diskettes containing digital representations of the standard symbols). If you are considering the purchase or use of those documents, you should read this report first. For some purposes, OFR 95-525 (the printed document) will prove to be an excellent resource. However, technical review identified significant problems with the two documents that will be addressed by various Federal and State committees composed of geologists and cartographers, as noted below. Therefore, the 2-year review period noted in OFR 95-525 is no longer applicable. Until those problems are resolved and formal standards are issued, you may consult the following World-Wide Web (WWW) site which contains information about development of geologic map standards: URL: http://ncgmp.usgs.gov/ngmdbproject/home.html

Open-File Report↗