Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Technical Note”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
USGS1999

Technical note: A device for obtaining time-integrated samples of ruminal fluid

A device was adapted to allow for time-integrated sampling of fluid from the rumen via a cannula. The sampler consisted of a cup-shaped ceramic filter positioned in the ventral rumen of a cannulated cow and attached to a tube through which fluid entering the filter was removed continuously using a peristaltic pump. Rate of ruminal fluid removal using the device was monitored over two 36-h periods (at 6-h intervals) and was not affected ( P > .05) by time, indicating that the system was not susceptible to clogging during this period. Two cows having ad libitum access to a totally mixed ration were used in a split-block design to evaluate the utility of the system for obtaining time-integrated samples of ruminal fluid. Ruminal fluid VFA concentration and pattern in samples collected in two replicated 8-h periods by the time-integrated sampler (at 1-h intervals) were compared with composite samples collected using a conventional suction-strainer device (at 30-min intervals). Each 8-h collection period started 2 h before or 6 h after feeding. Results indicated that total VFA concentration was not affected ( P > .05) by the sampling method. Volatile fatty acid patterns were likewise unaffected ( P > .05) except that acetate was 2.5% higher ( P < .05) in samples collected 2 h before feeding and valerate was 5% higher ( P < .05) in samples collected 6 h after feeding by the suction-strainer device. Although significant, these differences were not considered physiologically important. We concluded that use of the ceramic filter improved the sampling of ruminal fluid by simplifying the technique and allowing time-integrated samples to be obtained.

Journal of Animal Science↗
USGS2021

Technical note—Relative variability of selected turbidity standards and sensors in use by the U.S. Geological Survey

The challenges associated with field measurements of turbidity are well known and result primarily from differences in reported values that depend on instrument design and the resulting need for reporting units that are specific to those designs. A critical challenge for making comparable turbidity measurements is the selection and use of appropriate turbidity standards for sensor calibration. The accepted primary standards for turbidity measurements use formazin made from scratch; all others should relate back to readings obtained using standard formazin. However, because turbidity is a qualitative property of water, comparing standards is not as simple as it is for many chemical measurements. The U.S. Geological Survey “National Field Manual for the Collection of Water-Quality Data” currently allows for the use of two standards, formazin and polymer beads, for the calibration of field turbidimeters. Another challenge for making comparable turbidity measurements is selection of turbidity sensors. A turbidity sensor commonly used in the U.S. Geological Survey, the Yellow Springs Instruments (YSI) 6136, has been replaced by the manufacturer with the YSI EXO turbidity sensor. Both sensors operate on the same principles but have slight design differences that result in readings that are not directly comparable on a 1:1 basis. Differences in calibration standards and sensors are a cause of concern in ongoing studies that require switching calibration standards or sensor types, and for comparisons of data collected with sensors calibrated by using different calibration standards, different sensor types, or both. The objectives of this study were to evaluate the response of two YSI turbidity sensors in both formazin-based standards (StablCal) and polymer turbidity standards (in this case YSI brand; however, other brands are available) and to compare the performance of the YSI EXO and YSI 6136 turbidity sensors under similar laboratory and environmental (field) conditions. To quantify these differences, a series of laboratory and field side-by-side comparisons were conducted. Nine field comparisons of YSI EXO and YSI 6136 sensors were performed at site locations in Kansas and Virginia. Two field comparisons of StablCal and polymer calibration standards were performed in Kansas, both using YSI EXO turbidity sensors. Five laboratory comparisons between the YSI EXO and YSI 6136 turbidity sensors were performed, and seven laboratory comparisons between StablCal and polymer turbidity standards were performed using YSI EXO turbidity sensors. The results can help the USGS and others better understand how turbidity data can differ depending on the sensors and calibration standards used. Key findings and conclusions include the following— Regardless of the comparison, strong linear associations were typically found across all measures of turbidity under field and laboratory conditions, but linear associations were not necessarily 1:1 and varied by type of standard, type of sensor, and field and laboratory conditions. The mean relative percentage differences for all but a few comparisons were greater than 10 percent but less than 30 percent. However, differences were inconsistent across the laboratory and field conditions measured in this study, precluding the ability to formulate definitive statements of consistent directional bias depending on the type of standard or sensor used. Across all tests and a range of 0 to 1,000 formazin nephelometric units (FNU), no consistent bias between the YSI EXO and YSI 6136 turbidity sensors was observed, but either regression relations were near 1:1 or the YSI EXO turbidity readings were lower than those measured with the YSI 6136. Relative percentage differences typically exceeded the 10- and 30-percent benchmarks. However, most (about 95 percent) of the absolute differences between turbidity values measured with the YSI EXO and those measured with the YSI 6136 sensors were less than 20 FNU. In laboratory experiments, when turbidity was “constant,” the absolute difference between YSI EXO and YSI 6136-measured turbidity values ranged from near 0 FNU to nearly 400 FNU (over a range of 0 to 1,000 FNU). Substantial variability in turbidity measurements makes comparison between standards and sensor types challenging. Given the inherent variability in turbidity measurements and the lack of consistent bias between calibration standards or sensors, changing methods during an ongoing study would compromise the comparability of the data. The effect of changing methods ultimately depends on study objectives. If method changes are required, laboratory- and field-based comparisons across a range of conditions ideally would be conducted to determine whether site-specific biases can be identified.

Open-File Report↗
USGS2022

Technical note—Performance evaluation of the PhytoFind, an in-place phytoplankton classification tool

In 2019, the U.S. Geological Survey evaluated the performance of the Turner Designs, Inc. PhytoFind, an in-place phytoplankton classification tool. The sensor was tested with sample blanks, monoculture and mixed phytoplankton cultures, and turbidity challenges in a laboratory, and was tested on a 120-mile survey of the Caloosahatchee and St. Lucie Rivers in Florida, including Lake Okeechobee. Results include the following: The mixed phytoplankton group fluorescence channel (green excitation sensor) of the PhytoFind can be sensitive to interference. The PhytoFind generally overestimated chlorophyll concentration relative to laboratory-measured chlorophyll a concentrations. Turbidity interference may be less apparent in samples where green algae (chlorophytes) represent a high relative percentage of biovolume. The dissolved organic matter compensation feature was effective in the environmental waters sampled during this evaluation. The correlation between percent chlorophyll contribution per phytoplankton group measured by the PhytoFind and relative percent biovolume per phytoplankton group measured in the laboratory varied and was not explicitly determined to be related to dominant taxa, phytoplankton community composition, or environmental conditions.

Scientific Investigations Report↗
USGS2014

Technical Note: Linking climate change and downed woody debris decomposition across forests of the eastern United States

Forest ecosystems play a critical role in mitigating greenhouse gas emissions. Forest carbon (C) is stored through photosynthesis and released via decomposition and combustion. Relative to C fixation in biomass, much less is known about C depletion through decomposition of woody debris, particularly under a changing climate. It is assumed that the increased temperatures and longer growing seasons associated with projected climate change will increase the decomposition rates (i.e., more rapid C cycling) of downed woody debris (DWD); however, the magnitude of this increase has not been previously addressed. Using DWD measurements collected from a national forest inventory of the eastern United States, we show that the residence time of DWD may decrease (i.e., more rapid decomposition) by as much as 13% over the next 200 years, depending on various future climate change scenarios and forest types. Although existing dynamic global vegetation models account for the decomposition process, they typically do not include the effect of a changing climate on DWD decomposition rates. We expect that an increased understanding of decomposition rates, as presented in this current work, will be needed to adequately quantify the fate of woody detritus in future forests. Furthermore, we hope these results will lead to improved models that incorporate climate change scenarios for depicting future dead wood dynamics in addition to a traditional emphasis on live-tree demographics.

Biogeosciences↗
USGS2018

Technical note: False low turbidity readings from optical probes during high suspended-sediment concentrations

Turbidity, a measure of water clarity, is monitored for a variety of purposes including (1) to help determine whether water is safe to drink, (2) to establish background conditions of lakes and rivers and detect pollution caused by construction projects and stormwater discharge, (3) to study sediment transport in rivers and erosion in catchments, (4) to manage siltation of water reservoirs, and (5) to establish connections with aquatic biological properties, such as primary production and predator–prey interactions. Turbidity is typically measured with an optical probe that detects light scattered from particles in the water. Probes have defined upper limits of the range of turbidity that they can measure. The general assumption is that when turbidity exceeds this upper limit, the values of turbidity will be constant, i.e., the probe is pegged ; however, this assumption is not necessarily valid. In rivers with limited variation in the physical properties of the suspended sediment, at lower suspended-sediment concentrations, an increase in suspended-sediment concentration will cause a linear increase in turbidity. When the suspended-sediment concentration in these rivers is high, turbidity levels can exceed the upper measurement limit of an optical probe and record a constant pegged value. However, at extremely high suspended-sediment concentrations, optical turbidity probes do not necessarily stay pegged at a constant value. Data from the Colorado River in Grand Canyon, Arizona, USA, and a laboratory experiment both demonstrate that when turbidity exceeds instrument-pegged conditions, increasing suspended-sediment concentration (and thus increasing turbidity) may cause optical probes to record decreasing false turbidity values that appear to be within the valid measurement range of the probe. Therefore, under high-turbidity conditions, other surrogate measurements of turbidity (e.g., acoustic-attenuation measurements or suspended-sediment samples) are necessary to correct these low false turbidity measurements and accurately measure turbidity.

Hydrology and Earth System Sciences↗
USGS2025

Technical note: A low-cost approach to monitoring relative streamflow dynamics in small headwater streams using time lapse imagery and a deep learning model

Despite their ubiquity and importance as freshwater habitat, small headwater streams are under-monitored by existing stream gage networks. To address this gap, we describe a low-cost, non-contact, and low-effort method that enables organizations to monitor relative streamflow dynamics in small headwater streams. The method uses a camera to capture repeat images of the stream from a fixed position. A person then annotates pairs of images, in each case indicating which image has more apparent streamflow or indicating equal flow if no difference is discernible. A deep learning modeling framework called streamflow rank estimation (SRE) is then trained on the annotated image pairs and applied to rank all images from highest to lowest apparent streamflow. From this result a relative hydrograph can be derived. We found that our modeled relative hydrograph dynamics matched the observed hydrograph dynamics well for 11 cameras at 8 streamflow sites in western Massachusetts. Higher performance was observed during the annotation period (median Kendall's Tau rank correlation of 0.75, with a range of 0.6–0.83) than after it (median Kendall's Tau of 0.59, with range 0.34–0.74). We found that annotation performance was generally consistent across the 11 camera sites and 2 individual annotators and was positively correlated with streamflow variability at a site. A scaling simulation determined that model performance improvements were limited after 1000 annotation pairs. Our model's estimates of relative flow, while not equivalent to absolute flow, may still be useful for many applications, such as ecological modeling and calculating event-based hydrological statistics (e.g., the number of out-of-bank floods). We anticipate that this method will be a valuable tool to extend existing stream monitoring networks and provide new insights on dynamic headwater systems.

Massachusetts↗
USGS2016

Technical Note: Harmonizing met-ocean model data via standard web services within small research groups

Work over the last decade has resulted in standardised web services and tools that can significantly improve the efficiency and effectiveness of working with meteorological and ocean model data. While many operational modelling centres have enabled query and access to data via common web services, most small research groups have not. The penetration of this approach into the research community, where IT resources are limited, can be dramatically improved by (1) making it simple for providers to enable web service access to existing output files; (2) using free technologies that are easy to deploy and configure; and (3) providing standardised, service-based tools that work in existing research environments. We present a simple, local brokering approach that lets modellers continue to use their existing files and tools, while serving virtual data sets that can be used with standardised tools. The goal of this paper is to convince modellers that a standardised framework is not only useful but can be implemented with modest effort using free software components. We use NetCDF Markup language for data aggregation and standardisation, the THREDDS Data Server for data delivery, pycsw for data search, NCTOOLBOX (MATLAB®) and Iris (Python) for data access, and Open Geospatial Consortium Web Map Service for data preview. We illustrate the effectiveness of this approach with two use cases involving small research modelling groups at NATO and USGS.

Ocean science and engineering↗
USGS2025

Evapotranspiration terminology and definitions

Evapotranspiration (ET), the combined process of evaporation from soil and plant surfaces and transpiration from plant tissue, plays a pivotal role in the global water and energy balance. Accurately quantifying ET at various spatial scales is important for diverse applications, including irrigation and natural resource management. While efforts to standardize ET methodology have progressed over the last few decades, some confusion and disagreements in terminology persist among communities of researchers and practitioners involved in the measurement, estimation, and simulation of ET. This technical note addresses the historical evolution and standardization of ET terminology, aiming to reduce and mitigate disparities in definitions and usage by advocating for standardized definitions and emphasizing the adoption of reference ET ( ET ref ) terminology to promote consistency and accuracy and to avoid ambiguity. This document provides comprehensive definitions of key terms, including crop (i.e., vegetation cover) coefficients, consumptive use (CU), actual crop evapotranspiration ( ET a ), and ET ref variants for short (grass, ET o ) and tall (alfalfa, ET r ) reference crops. Practical discussion on several relevant topics is given: (1) single and dual crop coefficient approaches, (2) applications to nonagricultural vegetation, (3) recommended subscripts for terms, (4) practical guidelines and considerations for ET ref calculation, (5) encouragement to replace “potential ET” terminology with better terms, (6) clarification on maximum ET ( ET max ) and maximum crop coefficient ( K c max ) terms, (7) ET products derived from remote sensing, (8) a brief description of the role of ET in water rights, and (9) a figure illustrating the use of the terms defined herein. The conclusion emphasizes the importance of consistent terminology for effective communication among researchers and end-users, which will facilitate the adoption of standardized ET methods and technologies. This technical note was created by the American Society of Civil Engineers, Environmental and Water Resources Institute (ASCE-EWRI), Evapotranspiration in Irrigation and Hydrology Committee, with input and endorsement from other relevant organizations in the United States and internationally. This note serves as a comprehensive reference guide for ET practitioners and researchers.

Irrigation and Drainage Engineering↗
USGS2004

Editors' message: Hydrogeology Journal in 2003

Hydrogeology Journal appeared in six issues containing a total of 710 pages and 48 major articles, including 31 Papers and 14 Reports, as well as some Technical Notes and Book Reviews. The number of submitted manuscripts continues to increase. The final issue of 2003 also contained the annual volume index. Hydrogeology Journal ( HJ ) is an international forum for hydrogeology and related disciplines and authors in 2003 were from about 28 countries. Articles advanced hydrogeologic science and described hydrogeologic systems in many regions worldwide. These articles focused on a variety of general topics and on studies of hydrogeology in 24 countries: Afghanistan, Algeria, Argentina, Australia, Bangladesh, Belgium, Canada, Chile, China, Denmark, France, India, Italy, Mexico, Netherlands, New Zealand, Nigeria, Norway, Portugal, Russia, South Africa, Switzerland, Turkey, and U.S.A. The Guest Editor of the 2003 HJ theme issue on “Hydromechanics in Geology and Geotechnics”, Ove Stephansson, assembled a valuable collection of technical reviews and research papers from eminent authors on important aspects of the subject area.

Hydrogeology Journal↗
USGS2014

Robust, low-cost data loggers for stream temperature, flow intermittency, and relative conductivity monitoring

Water temperature and streamflow intermittency are critical parameters influencing aquatic ecosystem health. Low-cost temperature loggers have made continuous water temperature monitoring relatively simple but determining streamflow timing and intermittency using temperature data alone requires significant and subjective data interpretation. Electrical resistance (ER) sensors have recently been developed to overcome the major limitations of temperature-based methods for the assessment of streamflow intermittency. This technical note introduces the STIC (Stream Temperature, Intermittency, and Conductivity logger); a robust, low-cost, simple to build instrument that provides long-duration, high-resolution monitoring of both relative conductivity (RC) and temperature. Simultaneously collected temperature and RC data provide unambiguous water temperature and streamflow intermittency information that is crucial for monitoring aquatic ecosystem health and assessing regulatory compliance. With proper calibration, the STIC relative conductivity data can be used to monitor specific conductivity.

Water Resources Research↗
USGS2003

Hydrogeology Journal in 2002

Hydrogeology Journal appeared in six issues containing a total of 674 pages and 47 major articles, including 22 Papers and 24 Reports, as well as Technical Notes and Book Reviews. The final issue of 2002 also contained the annual volume index. Hydrogeology Journal (HJ) is an international forum for hydrogeology and related disciplines. Authors in 2002 were from about 30 countries. Articles advanced hydrogeologic science and described hydrogeologic systems in many regions worldwide. These articles focused on 22 countries: Afghanistan, Argentina, Australia, Austria, Belgium, Brazil, Canada, China, India, Israel, Japan, Jordan, Mexico, New Zealand, Nigeria, Portugal, Qatar, Switzerland, Syria, Turkey, UK, and the USA. The Guest Editors of the 2002 HJ theme issue on "Groundwater Recharge", Bridget R. Scanlon and Peter G. Cook, assembled a highly relevant and sought-after collection of papers from eminent authors on wide-ranging aspects of the subject.

Hydrogeology Journal↗
USGS2023

WellSTIC: A cost-effective sensor for performing point dilution tests to measure groundwater velocity in shallow aquifers

Many individual measurement points are required to characterize groundwater velocity within an aquifer. Groundwater velocity is most commonly measured using a network of >5 cm diameter monitoring wells, which, if not already present at a site, are expensive and labor-intensive to install. Drive-point piezometers—simple, cost-effective wells that can be installed by hand—are a common tool for sampling groundwater in shallow, alluvial aquifers, but most groundwater velocity measurement techniques require equipment that is too large for these narrow (usually <2 cm inside diameter) piezometers. In this technical note, we introduce a low-cost sensor and well packer system (<$90 USD) for performing point dilution tests in narrow piezometers. Field data show that the magnitude of groundwater velocity measured with this technique agrees with velocities computed from natural gradient tracer tests. Additionally, with proper calibration, these sensors can be used to continuously monitor in-well specific conductance, either during inter-well tracer tests with saline tracers or for water quality monitoring. This system is a viable tool for rapid assessment of the magnitude of groundwater velocity in shallow aquifers.

Water Resources Research↗
USGS2010

Interaction of fine sediment with alluvial streambeds

More knowledge is needed about the physical processes that control the transport of fine sediment moving over an alluvial bed. The knowledge is needed to design rational sampling and monitoring programs that assess the transport and fate of toxic substances in surface waters because the toxics are often associated with silt- and clay-sized particles. This technical note reviews some of the past research in areas that may contribute to an increased understanding of the processes involved. An alluvial streambed can have a large capacity to store fine sediments that are extracted from the flow when instream concentrations are high and it can gradually release fine sediment to the flow when the instream concentrations are low. Several types of storage mechanisms are available depending on the relative size distribution of the suspended load and bed material, as well as the flow hydraulics. Alluvial flow tends to segregate the deposited material according to size and density. Some of the storage locations are temporary, but some can store the fine sediment for very long periods of time.

Water Resources Research↗
USGS2018

Review and development of ASABE Engineering Practice 621: “Guidelines for calibrating, validating, and evaluating hydrologic and water quality models”

In 2010, the Natural Resources and Environmental Systems Hydrology Committee (NRES-21) of ASABE initiated a long-term process to develop guidelines to improve modeling practice through better understanding of the calibration, validation, and evaluation process across applications and more effective interpretation and communication of model performance. This effort generated a compilation of 23 articles with model-specific descriptions and guidance (2012), a position paper outlining guidance for evaluating, interpreting, and communicating performance of hydrologic and water quality models considering intended use (2014), and a compilation of ten articles addressing key topics related to model calibration and validation (2015). In 2016, the first draft of ASABE Engineering Practice 621 (EP621), “Guidelines for Calibrating, Validating, and Evaluating Hydrologic and Water Quality (H/WQ) Models,” was developed, subsequently revised, and ultimately approved by the ASABE Standards Committee in 2017. EP621 provides guidelines, not prescriptive requirements, and as such recommends “good” modeling practices to enhance calibration, validation, evaluation, and communication of H/WQ models through establishment of consistent terminology; model selection; compilation and processing of input data and calibration, validation, and evaluation data; determination of model performance measures; model parameterization and calibration; re-examination of input and calibration data and/or consideration of model refinement; re-evaluation of model performance; and documentation of modeling process and results. EP621 can be obtained from the ASABE Technical Library at https://elibrary.asabe.org/abstract.asp?aid=47804. The objectives of this technical note are to review the process and rationale used to develop EP621 and to briefly summarize its major components.

Transactions of the ASABE↗
USGS2015

Black-tailed and white-tailed jackrabbits in the American West: History, ecology, ecological significance, and survey methods

Across the western United States, Leporidae are the most important prey item in the diet of Golden Eagles ( Aquila chrysaetos ). Leporids inhabiting the western United States include black-tailed ( Lepus californicus ) and white-tailed jackrabbits ( Lepus townsendi i) and various species of cottontail rabbit ( Sylvilagus spp.). Jackrabbits ( Lepus spp.) are particularly important components of the ecological and economic landscape of western North America because their abundance influences the reproductive success and population trends of predators such as coyotes ( Canis latrans ), bobcats ( Lynx rufus ), and a number of raptor species. Here, we review literature pertaining to black-tailed and white-tailed jackrabbits comprising over 170 published journal articles, notes, technical reports, conference proceedings, academic theses and dissertations, and other sources dating from the late 19th century to the present. Our goal is to present information to assist those in research and management, particularly with regard to protected raptor species (e.g., Golden Eagles), mammalian predators, and ecological monitoring. We classified literature sources as (1) general information on jackrabbit species, (2) black-tailed or (3) white-tailed jackrabbit ecology and natural history, or (4) survey methods. These categories, especially 2, 3, and 4, were further subdivided as appropriate. The review also produced several tables on population trends, food habits, densities within various habitats, and jackrabbit growth and development. Black-tailed and white-tailed jackrabbits are ecologically similar in general behaviors, use of forms, parasites, and food habits, and they are prey to similar predators; but they differ in their preferred habitats. While the black-tailed jackrabbit inhabits agricultural land, deserts, and shrublands, the white-tailed jackrabbit is associated with prairies, alpine tundra, and sagebrush-steppe. Frequently considered abundant, jackrabbit numbers in western North America fluctuate temporally and spatially. We also reviewed methods used to investigate jackrabbit populations, including spotlight line transects, flushing transects, drive counts, pellet plot counts, collections, roadside counts, mark-recapture studies, and radio-telemetry studies. Our review of jackrabbit literature illustrates a number of deficiencies in our understanding of jackrabbits in general. As an example, a detailed quantitative description of habitat preferences is lacking, as is a thorough understanding of sympatric jackrabbit species interactions. Even the existence of the oft-cited jackrabbit &ldquo;cycle&rdquo; is a matter of debate. Survey methods generally do not address efficacy or accuracy in measuring jackrabbit density or abundance. In addition, there is a paucity of information about jackrabbits in the Mojave Desert, with no real understanding of home ranges, habitat preferences, and population dynamics or demographics in this region.

Arizona, California, Colorado, Idaho, Iowa, Kansas↗
USGS1977

Activity-product constants of brucite from 10 degrees to 90 degrees C

The activity-product constant of brucite, K B = [Mg 2+ ][OH - ] 2 (where the brackets denote activities), was determined experimentally at 10°, 25°, 40°, 55°, 70°, and 90°C. The values obtained for -log K B are 10.89±0.16 (10°), 10.88±0.10 (25°), 10.90±0.10 (40°), 10.90±0.10 (55°), 10.99±0.14 (70°), and 11.10±0.14 (90°). Using National Bureau of Standards Technical Note 270 data for the ions, the free energy of formation (Δ G ° t ) at 25° for brucite is 831.486 joules per mole ( 198,730 cal mol -1 ). Using data compiled by R. A. Robie and D. R. Waldbaum in 1968 for the ions, this Δ G ° t is -823,323 J mol -1 (-198,930 cal mol -1 ). Values of log KB are also calculated for the temperature range 0° to 200°C, by using thermochemical data listed by V. B. Parker, D. D. Wagman, and W. H. Evans in 1971 and E. G. King, M. J. Ferrante, and L. B. Pankratz in 1975 and the partial molal heat capacities estimated by C. M. Criss and J. W. Cobble in 1965. The experimental values are similar to the calculated values, especially at lower temperatures.

Journal of Research of the U.S. Geological Survey↗
USGS2026

Identifying overwintering habitat of silver and bighead carp in the lower Mississippi River: Implications for harvesting and population reduction

A total of 41 sites along a 58 mi reach of the Lower Mississippi River (LMR) were surveyed during winter 2022 for invasive carp aggregation.* Sites consisting of scallops closest to the dike-vegetated bank interface with deeper, slow-moving water and consistent access back to the main channel were preferred. Carp avoided strong currents, and there was no trend in depth selection other than avoiding shallow (less than 20 ft) water. In January 2023, recreation-grade sonar (e.g., side-scan and down-imaging) surveys were conducted in the same reach of the LMR to demonstrate the technology and evaluate carp population size at sites with high abundances based on previous surveys. Fish density was estimated to be 32 fish/10,000 yd 3 (95% confidence interval [CI; 31–34]) using down-imaging software, which is the first estimate of assumed bigheaded carp density in the LMR. Additional fish collections are needed to confirm species composition and size abundance provided by sonar technology. Resurveying sites with high carp abundance over a range of river stages would be necessary to fully characterize habitat conditions, evaluate influence of river stage on occupancy duration, and continue to evaluate species composition and mass removal techniques as a management option in the Lower Mississippi River.

Louisiana, Mississippi↗
USGS2013

Raptor nesting near oil and gas development: an overview of key findings and implications for management based on four reports by HawkWatch International

The project was undertaken because of a paucity of information about the possible effects of OG operations and resource management on nesting raptors. BLM raptor management has included stipulations that restricted human activity near raptor nests during the raptor nesting season. The BLM and the Department of Energy (DOE), which provided financial support for the study, seek information that will contribute to enhancing OG extraction operations while providing environmental protection, including raptor conservation. This project used historical data from Utah and Wyoming. The Price, Utah study area, as of 2006, contained more than 1,100 wells, in a nearly uniform distribution at a density of one per quarter section (160-acre spacing). Some development occurred closer to existing nests because the nest sites had not been discovered or because the land is administered by the State of Utah, without these stipulations. The Rawlins, Wyoming study area included more than 4,200 OG wells in 2006. Compared to the Price study area, wells at Rawlins were less regularly distributed; reaching densities of one well per quarter section (160-acre spacing) in some areas, but less dense elsewhere. HWI compiled information from federal bureaus, state agencies, and industry, and determined how to evaluate the effectiveness of spatial and temporal buffer restrictions that have been applied within areas of OG extraction. HWI used the historical data to describe patterns of OG development relative to raptor nests, and to document changes in the distribution and breeding status of raptor nests relative to OG activities. HWI evaluated how these historical datasets were useful for quantifying the relationship between OG development and other human activities and nesting raptors. HWI assessed changes in Ferruginous Hawk (Buteo regalis) nesting success and productivity, and in use of artificial nest structures (ANSs), which had been erected to reduce the use by raptors of OG structures as nest substrates. Also, HWI studied Accipiter species’ use of pinyon– juniper vegetation communities in the Piceance Basin of Colorado, described basic vegetation and landscape characteristics of nests, and offered recommendations about surveying for accipiter hawks in pinyon–juniper landscapes. Please read the HWI reports for details.

BLM Technical Note↗