Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Soil Survey Horizons”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources

Extent of localized tree mortality influences soil biogeochemical response in a beetle-infested coniferous forest

Recent increases in the magnitude and occurrence of insect-induced tree mortality are disruptingevergreen forests globally. To resolve potentially conflicting ecosystem responses, we investigatedwhether surrounding trees exert compensatory effects on biogeochemical signatures following beetleinfestation. To this end, plots were surveyed within a Colorado Rocky Mountain watershed that expe-rienced beetle infestation almost a decade prior and contained a range of surrounding tree mortality(from 9 to 91% of standing trees). Near-surface soil horizons under plot-centered live (green) and beetle-killed (grey) lodgepole pines were sampled over two consecutive summers with variable moistureconditions. Results revealed that soil respiration was 18e28% lower beneath beetle-infested trees andcorrelated to elevated dissolved organic carbon aromaticity. While certain edaphic parameters includingpH and water content were elevated below grey compared to green trees regardless of the mortalityextent within plots, other biogeochemical responses required a higher severity of surrounding mortalityto overcome compensatory effects of neighboring live trees. For instance, C:N ratios under grey treesdeclined with increased severity of surrounding tree mortality, and the proportion of ammonium dis-played a threshold effect with pronounced increases after surrounding tree mortality exceeded ~40%.Overall, the biogeochemical response to tree death was most prominent in the mineral soil horizonwhere tree mortality had the largest affect on carbon recalcitrance and the enrichment of nitrogenspecies. These results can aid in determining when and where nutrient cycles and biogeochemicalfeedbacks to the atmosphere and hydrosphere will be observed in association with this type of ecological disturbance.

Rocky Mountain Watershed↗

Differentiating sediment sources using sediment fingerprinting techniques, in the Sprague River Basin, South-Central Oregon

Identifying sources of sediment to streams in the Sprague River Basin, in south-central Oregon, is important for restoration efforts that are focused on reducing sediment erosion and transport. Reducing sediment loads in these streams also contributes to compliance with the total maximum daily load reduction requirements for total phosphorus in this basin. In the Sprague River Basin, phosphorus occurs in surface waters in both dissolved phase and particulate phase, and particulate phosphorus is readily transported in streams on fine-grained suspended sediments, which eventually deposit in Upper Klamath Lake. The lake has seasonal blooms of cyanobacteria that require phosphorus for growth and degrade water-quality conditions, violating State water-quality standards and creating conditions that are stressful to two endangered suckers that reside in the lake. Identifying sources of sediment to the Sprague River could help inform restoration actions by determining the principal locations in the basin contributing fine sediment to the river. The U.S. Geological Survey, in cooperation with the U.S. Fish and Wildlife Service, conducted a proof-of-concept study to determine if sediment fingerprinting can differentiate sources of bank erosion by source material, basin, river reach, and soil horizon. The sediment fingerprinting approach uses properties of streambank and streambed sediment to differentiate between multiple sediment sources by determining a composite signature, or fingerprint. The composite fingerprint is established by combining fingerprint properties from laboratory results of elemental analysis, stable isotopes, and total carbon and nitrogen. The methods for differentiating sediment samples for this study include grouping bank and bed samples by basin, river reach, and soil horizon, and using non-parametric statistics to determine which fingerprint properties could be used to differentiate the sample groups. Results indicate that fingerprint properties differentiated source material, river reach, and basin, and were more successful at differentiating samples grouped by geographic location (basin and reach) compared to source material. Source material (banks, bed, levees) were differentiated with three fingerprint properties—Antimony (Sb), copper (Cu), and manganese (Mn). The basin category (South Fork and main-stem Sprague River) differentiated the South Fork and main stem with stable nitrogen isotopes (δ 15 N), aluminum (Al), silicon (Si), and vanadium (V). Specific river reaches within the study area were differentiated with 11 different fingerprint properties. These results can be used for apportionment studies using suspended sediment samples and mixing models to determine sediment source contributions within the basin.

Oregon↗

The distribution of selected elements and minerals in soil of the conterminous United States

In 2007, the U.S. Geological Survey initiated a low-density (1 site per 1600 km 2 , 4857 sites) geochemical and mineralogical survey of soil of the conterminous United States as part of the North American Soil Geochemical Landscapes Project. Three soil samples were collected, if possible, from each site; (1) a sample from a depth of 0 to 5 cm, (2) a composite of the soil A-horizon, and (3) a deeper sample from the soil C-horizon or, if the top of the C-horizon was at a depth greater than 100 cm, from a depth of approximately 80–100 cm. The < 2 mm fraction of each sample was analysed for a suite of 45 major and trace elements following near-total multi-acid digestion. The major mineralogical components in samples from the soil A- and C-horizons were determined by a quantitative X-ray diffraction method using Rietveld refinement. Sampling ended in 2010 and chemical and mineralogical analyses were completed in May 2013. Maps of the conterminous United States showing predicted element and mineral concentrations were interpolated from actual soil data for each soil sample type by an inverse distance weighted (IDW) technique using ArcGIS software. Regional- and national-scale map patterns for selected elements and minerals apparent in interpolated maps are described here in the context of soil-forming factors and possible human inputs. These patterns can be related to (1) soil parent materials, for example, in the distribution of quartz, (2) climate impacts, for example, in the distribution of feldspar and kaolinite, (3) soil age, for example, in the distribution of carbonate in young glacial deposits, and (4) possible anthropogenic loading of phosphorus (P) and lead (Pb) to surface soil. This new geochemical and mineralogical data set for the conterminous United States represents a major step forward from prior national-scale soil geochemistry data and provides a robust soil data framework for the United States now and into the future.

Journal of Geochemical Exploration↗

History and progress of the North American Soil Geochemical Landscapes Project, 2001-2010

In 2007, the U.S. Geological Survey, the Geological Survey of Canada, and the Mexican Geological Survey initiated a low-density (1 site per 1600 km 2 , 13323 sites) geochemical and mineralogical survey of North American soils (North American Soil Geochemical Landscapes Project). Sampling and analytical protocols were developed at a series of workshops in 20032004 and pilot studies were conducted from 20042007. The ideal sampling protocol at each site includes a sample from 05 cm depth, a composite of the soil A horizon, and a sample from the soil C horizon. The <2-mm fraction of each sample is analyzed for Al, Ca, Fe, K, Mg, Na, S, Ti, Ag, Ba, Be, Bi, Cd, Ce, Co, Cr, Cs, Cu, Ga, In, La, Li, Mn, Mo, Nb, Ni, P, Pb, Rb, Sb, Sc, Sn, Sr, Te, Th, Tl, U, V, W, Y, and Zn by inductively coupled plasma-mass spectrometry and inductively coupled plasma-atomic emission spectrometry following a near-total digestion in a mixture of HCl, HNO 3 , HClO 4 , and HF. Separate methods are used for As, Hg, Se, and total C on this same size fraction. The major mineralogical components are determined by a quantitative X-ray diffraction method. Sampling in the conterminous U.S. was completed in 2010 (c. 4800 sites) with chemical and mineralogical analysis currently underway. In Mexico, approximately 66% of the sampling (871 sites) had been done by the end of 2010 with completion expected in 2012. After completing sampling in the Maritime provinces and portions of other provinces (472 sites, 7.6% of the total), Canada withdrew from the project in 2010. Preliminary results for a swath from the central U.S. to Florida clearly show the effects of soil parent material and climate on the chemical and mineralogical composition of soils. A sample archive will be established and made available for future investigations.

Earth Science Frontiers↗

The potential of mid- and near-infrared diffuse reflectance spectroscopy for determining major- and trace-element concentrations in soils from a geochemical survey of North America

In 2004, soils were collected at 220 sites along two transects across the USA and Canada as a pilot study for a planned soil geochemical survey of North America (North American Soil Geochemical Landscapes Project). The objective of the current study was to examine the potential of diffuse reflectance (DR) Fourier Transform (FT) mid-infrared (mid-IR) and near-infrared (NIRS) spectroscopy to reduce the need for conventional analysis for the determination of major and trace elements in such continental-scale surveys. Soil samples (n = 720) were collected from two transects (east-west across the USA, and north-south from Manitoba, Canada to El Paso, Texas (USA), n = 453 and 267, respectively). The samples came from 19 USA states and the province of Manitoba in Canada. They represented 31 types of land use (e.g., national forest, rangeland, etc.), and 123 different land covers (e.g., soybeans, oak forest, etc.). The samples represented a combination of depth-based sampling (0-5 cm) and horizon-based sampling (O, A and C horizons) with 123 different depths identified. The set was very diverse with few samples similar in land use, land cover, etc. All samples were analyzed by conventional means for the near-total concentration of 49 analytes (C total , C carbonate and C organic , and 46 major and trace elements). Spectra were obtained using dried, ground samples using a Digilab FTS-7000 FT spectrometer in the mid- (4000-400 cm -1 ) and near-infrared (10,000-4000 cm -1 ) at 4 cm -1 resolution (64 co-added scans per spectrum) using a Pike AutoDIFF DR autosampler. Partial least squares calibrations were develop using: (1) all samples as a calibration set; (2) samples evenly divided into calibration and validation sets based on spectral diversity; and (3) samples divided to have matching analyte concentrations in calibration and validation sets. In general, results supported the conclusion that neither mid-IR nor NIRS would be particularly useful in reducing the need for conventional analysis of soils from this continental-scale geochemical survey. The extreme sample diversity, likely caused by the widely varied parent material, land use at the site of collection (e.g., grazing, recreation, agriculture, etc.), and climate resulted in poor calibrations even for C total , C organic and C carbonate . The results indicated potential for mid-IR and NIRS to differentiate soils containing high concentrations (>100 mg/kg) of some metals (e.g., Co, Cr, Ni) from low-level samples (<50 mg/kg). However, because of the small number of high-level samples, it is possible that differentiation was based on factors other than metal concentration. Results for Mg and Sr were good, but results for other metals examined were fair to poor, at best. In essence, it appears that the great variation in chemical and physical properties seen in soils from this continental-scale survey resulted in each sample being virtually unique. Thus, suitable spectroscopic calibrations were generally not possible.

Applied Geochemistry↗

Centimeter-scale surface deformation caused by the 2011 Mineral, Virginia, earthquake sequence at the Carter farm site—Subsidiary structures with a quaternary history

Centimeter-scale ground-surface deformation was produced by the August 23, 2011, magnitude (M) 5.8 earthquake that occurred in Mineral, Virginia. Ground-surface deformation also resulted from the earthquake aftershock sequence. This deformation occurred along a linear northeast-trend near Pendleton, Virginia. It is approximately 10 kilometers (km) northeast of the M5.8 epicenter and near the northeastern periphery of the epicentral area as defined by aftershocks. The ground-surface deformation extends over a distance of approximately 1.4 km and consists of parallel, small-scale (a few centimeters (cm) in amplitude) linear ridges and swales. Individual ridge and swale features are discontinuous and vary in length across a zone that ranges from about 20 meters (m) to less than 5 m in width. At one location, three fence posts and adjoining rails were vertically misaligned. Approximately 5 cm of uplift on one post provides a maximum estimate of vertical change from pre-earthquake conditions along the ridge and swale features. There was no change in the alignment of fence posts, indicating that deformation was entirely vertical. A broad monoclinal flexure with approximately 1 m of relief was identified by transit survey across surface deformation at the Carter farm site. There, surface deformation overlies the Carter farm fault, which is a zone of brittle faulting and fracturing along quartz veins, striking N40°E and dipping approximately 75°SE. Brecciation and shearing along this fault is interpreted as Quaternary in age because it disrupts the modern B-soil horizon. However, deformation is confined to saprolitized schist of the Ordovician Quantico Formation and the lowermost portion of overlying residuum, and is absent in the uppermost residuum and colluvial layer at the ground surface. Because there is a lack of surface shearing and very low relief, landslide processes were not a causative mechanism for the surface deformation. Two possible tectonic models and one non-tectonic model are considered: (1) tectonic, monoclinal flexuring along the Carter farm fault, probably aseismic, (2) tectonic, monoclinal flexuring related to a shallow (1–3 km) cluster of aftershocks (M2 to M3) that occurred approximately 1 to 1.5 km to the east of Carter farm, and (3) non-tectonic, differential response to seismic shaking between more-rigid quartz veins and soft residuum-saprolite under vertical motions that were created by Rayleigh surface waves radiating away from the August 23, 2011, hypocenter and propagating along strike of the Carter farm fault. These processes are not considered mutually exclusive, and all three support brittle deformation on the Carter farm fault during the Quaternary. In addition, abandoned stream valleys and active stream piracy are consistent with long-term uplift in vicinity of the Carter farm fault.

Virginia↗

Continental-scale patterns in soil geochemistry and mineralogy: results from two transects across the United States and Canada

In 2004, the US Geological Survey (USGS) and the Geological Survey of Canada (GSC) initiated a pilot study that involved collection of more than 1500 soil samples from 221 sites along two continental transects across Canada and the United States. The pilot study was designed to test and refine protocols for a soil geochemical survey of North America. The two transects crossed a wide array of soil parent materials, soil ages, climatic conditions, landforms, land covers and land uses. Sample sites were selected randomly at approximately 40-km intervals from a population defined as all soils of the continent. At each site, soils representing 0 to 5 cm depth, and the O, A, and C horizons, if present, were collected and analyzed for their near-total content of over 40 major and trace elements. Soils from 0–5 cm depth were also collected for analysis of organic compounds. Results from the transects confirm that soil samples collected at a 40-km spacing reveal coherent, continental- to subcontinental-scale geochemical and mineralogical patterns that can be correlated to aspects of underlying soil parent material, soil age and climate influence. The geochemical data also demonstrate that at the continental-scale the dominance of any of these major factors that control soil geochemistry can change across the landscape. Along both transects, soil mineralogy and geochemistry change abruptly with changes in soil parent materials. However, the chemical influence of a soil’s parent material can be obscured by changing climatic conditions. For the transects, increasing precipitation from west to east and increasing temperature from north to south affect both soil mineralogy and geochemistry because of climate effects on soil weathering and leaching, and plant productivity. Regional anomalous metal concentrations can be linked to natural variations in soil parent materials, such as high Ni and Cr in soils developed on ultramafic rocks in California or high P in soils formed on weathered Ordovician limestones in central Kentucky. On local scales, anomalous metal concentrations recognized in soil profiles, such as high P in soils from animal confinement sites, are consistent with local anthropogenic disturbances. At a larger scale, the distribution of Hg across the west to east transect demonstrates that it can be difficult to distinguish between natural or anthropogenic contributions and that many factors can contribute to an element’s spatial distribution. Only three samples in a subset of seventy-three 0–5 cm depth soil samples from the north to south transect had organochlorine pesticides values above the method detection limit, apparently related to historic usage of the pesticides DDT and dieldrin.

Applied Geochemistry↗

A summary of water-quality and salt marsh monitoring, Humboldt Bay, California

This report summarizes data-collection activities associated with the U.S. Geological Survey Humboldt Bay Water-Quality and Salt Marsh Monitoring Project. This work was undertaken to gain a comprehensive understanding of water-quality conditions, salt marsh accretion processes, marsh-edge erosion, and soil-carbon storage in Humboldt Bay, California. Multiparameter sondes recorded water temperature, specific conductance, and turbidity at a 15-minute timestep at two U.S. Geological Survey water-quality stations: (1) Mad River Slough near Arcata, California (U.S. Geological Survey station 405219124085601) and (2) Hookton Slough near Loleta, California (U.S. Geological Survey station 404038124131801). At each station, discrete water samples were collected to develop surrogate regression models that were used to compute a continuous time series of suspended-sediment concentration from continuously measured turbidity. Data loggers recorded water depth at a 6-minute timestep in the primary tidal channels (Mad River Slough and Hookton Slough) in two adjacent marshes (Mad River marsh and Hookton marsh). The marsh monitoring network included five study marshes. Three marshes (Mad River, Manila, and Jacoby) are in the northern embayment of Humboldt Bay and two marshes (White and Hookton) are in the southern embayment. Surface deposition and elevation change were measured using deep rod surface elevation tables and feldspar marker horizons. Sediment characteristics and soil-carbon storage were measured using a total of 10 shallow cores, distributed across 5 study marshes, collected using an Eijkelkamp peat sampler. Rates of marsh edge erosion (2010–19) were quantified in four marshes (Mad River, Manila, Jacoby, and White) by estimating changes in the areal extent of the vegetated marsh plain using repeat aerial imagery and light detection and ranging (LiDAR)-derived elevation data. During the monitoring period (2016–19), the mean suspended-sediment concentration computed for Hookton Slough (50±20 milligrams per liter [mg/L]) was higher than Mad River Slough (18±7 mg/L). Uncertainty in mean suspended-sediment concentration values is reported using a 90-percent confidence interval. Across the five study marshes, elevation change (+1.8±0.6 millimeters per year [mm/yr]) and surface deposition (+2.5±0.5 mm/yr) were lower than published values of local sea-level rise (4.9±0.8 mm/yr), and mean carbon density was 0.029±0.005 grams of carbon per cubic centimeter. From 2010 to 2019, marsh edge erosion and soil carbon loss were greatest in low-elevation marshes with the marsh edge characterized by a gentle transition from mudflat to vegetated marsh (herein, ramped edge morphology) and larger wind-wave exposure. Jacoby Creek marsh experienced the greatest edge erosion. In total, marsh edge erosion was responsible for 62.3 metric tons of estuarine soil carbon storage loss across four study marshes. Salt marshes are an important component of coastal carbon, which is frequently referred to as “blue carbon.” The monitoring data presented in this report provide fundamental information needed to manage blue carbon stocks, assess marsh vulnerability, inform sea-level rise adaptation planning, and build coastal resiliency to climate change.

California↗

Hydrogeologic factors in the selection of shallow land burial sites for the disposal of low-level radioactive waste

In the United States, low-level radioactive waste is disposed of by shallow land burial. Commercial low-level radioactive waste has been buried at six sites, and low-level radioactive waste generated by the Federal Government has been buried at nine major and several minor sites. Several existing low-level radioactive waste sites have not provided expected protection of the environment. These shortcomings are related, at least in part, to an inadequate understanding of site hydrogeology at the time the sites were selected. To better understand the natural systems and the effect of hydrogeologic factors on long-term site performance, the U.S. Geological Survey has conducted investigations at five of the six commercial low-level radioactive waste sites and at three Federal sites. These studies, combined with those of other Federal and State agencies, have identified and confirmed important hydrogeologic factors in the effective disposal of low-level radioactive waste by shallow land burial. These factors include precipitation, surface drainage, topography, site stability, geology, thickness of the host soil-rock horizon, soil and sediment permeability, soil and water chemistry, and depth to the water table.

Circular↗

Using satellite imagery and soil data to understand occurrences and migration of soil conditions harmful to archaeological sites on Jamestown Island, Virginia

Many know Jamestown Island, Virginia, hereafter referred to as “the Island,” located near the mouth of the James River into the Chesapeake Bay, as the home of the first permanent English settlement in North America. However, the Island is home to 15,000 years’ worth of cultural artifacts and archaeological sites. In addition to its rich history, the Island is home to a variety of native plants and animals, including many rare, threatened, and endangered species. Preserving historical and natural resources is part of Colonial National Historic Park’s (COLO) enabling legislation. To this end, COLO has been seeking data to inform management decisions on how to prioritize resources to preserve archaeological sites and anticipate changes to natural systems from sea-level rise and other effects of climate change. The U.S. Geological Survey (USGS), in partnership with COLO, collected and analyzed data to help determine soil conditions detrimental to archaeological sites across the Island using a combination of soil samples and assessments of vegetative health as a proxy for soil conditions. This study combined normalized difference vegetative index raster grids spanning 8 years, 2010 to 2018, and soil data from 50 sites sampled in dry (June 2021) and wet months (March 2022) at two different soil horizons to investigate potential hazards to plant health and corrosive conditions in the unsaturated subsurface. The data suggest that access to the James River drives soil pH and soil conductivity. Areas of the Island that are subject to frequent inundation were observed to have both higher soil conductivity (as high as 4,845 millisiemens per meter [mS/m]) and lower pH (as low as 3.84). Higher soil conductivity, or salinity, and more acidity create corrosive environment, which can destroy buried artifacts and are detrimental to vegetative health. These conditions were not limited to the edges of the Island, like Black Point. Inland locations, such as the Pitch and Tar Swamp, were observed to have some of the highest conductivity values, which were likely caused by from a combination of inflow of James River water along Back Creek into the Pitch and Tar Swamp and proximity to the Visitor Center and other high-traffic areas of the Island. A difference of normalized difference vegetative index values from 2010 to 2018 raster grid appears to support this, showing an apparent loss of vegetative health in marsh grass in the Pitch and Tar Swamp. These data may inform COLO about areas of the Island that are currently most threatened by corrosive conditions and how those conditions are likely to migrate in the future.

Virginia↗

Assessment of methods for soil monitoring in the Adirondack region of New York

Repeated sampling to detect changes in forest soils was rarely used before 1990, but the value of soil monitoring in understanding environmental change is becoming well established. The growing number of resampling studies has shown that sampling designs and procedures must be adapted to the objectives of the monitoring program and the soils being monitored. In the Adirondack region, current priorities include the response of soils to large increases, and more recently, large decreases in acidic deposition, and changes driven by trending climate such as altered pools of soil organic carbon, as well as other unforeseen factors that will occur in the future. To improve methods and assess the feasibility of long-term soil monitoring in the Adirondack region, the United States Geological Survey (USGS) conducted a pilot project to evaluate a new sampling method for characterizing soils on a watershed basis. Results obtained with this new approach, referred to as the ADK sampling method, was compared to methods used in previous sampling conducted in 2004 as part of the Western Adirondack Stream Survey (WASS), and also to previous high-replication pit sampling in the North and South Tributary watersheds of Buck Creek (North Buck and South Buck). The number of sampling locations and spatial distribution of sampling points within watersheds differed among the methods, although pit excavation was used to obtain samples in all cases. In addition, this investigation evaluated the use of small diameter corers as a means to measure forest floor mass with greater accuracy and precision than commonly used methods such as pit excavation. Sufficient statistical power to detect ecologically relevant changes in upper profile horizons (Oe, Oa and upper 10 cm of the B) were achieved with the ADK sampling method that utilized 18 pit excavations per watershed. The sampling locations were organized within each watershed into three study areas (six sampling locations per study area) that represented the primary types of landscape within the watershed. Sampling at 18 locations per watershed was found to be nearly as effective at detecting changes as sampling at 28 locations per watershed. Numerous significant changes (P < 0.10) were detected with both 18 and 28 sampling locations at sampling intervals of 12 to 16 years. The relationship between soil data obtained with the ADK method and stream chemistry at the base of the watershed suggested that this approach adequately characterized soil variability within the watershed for the purpose of studying soil-stream linkages. Significant changes in upper B horizon calcium (P < 0.10) and Oa horizon aluminum (P < 0.01) were detected when the data from the four WASS watersheds were combined with the two Buck Creek watersheds, which suggested that there would be value in resampling other WASS watersheds previously sampled in 2004 to support a regional assessment. Study results support small diameter cores as a useful method to monitor changes in the organic matter mass of the forest floor. This method showed high reproducibility in repeated sampling tests and lower spatial variability in sample data than traditional approaches when compared on a watershed basis. Soil coring is also faster and requires less equipment than pit excavation methods, which makes it more conducive to sampling over large areas. However, organic matter mass of the forest floor determined by coring was consistently less than the values obtained by the ADK sampling method that used pit sampling and vertical horizon measurements, and also literature values of a previous Adirondack study that utilized pit sampling in which the entire horizon was collected over a measured area. However, a high correlation (R2 = 0.87) occurred between organic matter content (expressed as Mg ha-1) determined by coring and the ADK sampling method. Differing methods with regard to where sample could be collected, and how organic matter was collected for chemical analysis were the likely reasons for differences in quantification of forest floor organic mass. Collection of forest floor cores in conjunction with the ADK method is recommended to provide improved sensitivity in detecting changes in the forest floor in proximity of where full analyses of the soil profile are being done. This duel sampling approach represents an optimized method for measuring and understanding how Adirondack soils will change in the future.

New York↗

Paleoliquefaction field reconnaissance in eastern North Carolina—Is there evidence for large magnitude earthquakes between the central Virginia seismic zone and Charleston seismic zone?

In June 2016, approximately 64 kilometers (km) of riverbank were examined along the Tar and Neuse Rivers near Tarboro and Kinston, North Carolina, for evidence of liquefaction-forming earthquakes. The study area is in the vicinity of the Grainger’s fault zone in eastern North Carolina. The Grainger’s fault zone is a fault zone in the inner Coastal Plain Province that has well-documented Paleogene and younger deformation of Cretaceous to Eocene strata. Low-magnitude earthquakes near the fault zone (for example, magnitude [M] 2.1 in 2013, 13 km south-southwest of Kinston) suggest larger earthquakes may have struck this region in the past. The study area is about equidistant from newly documented Holocene paleoliquefaction sites in the Central Virginia Seismic Zone (CVSZ) and liquefaction sites formed during the 1886 M7.1 Charleston, South Carolina earthquake. The northernmost Holocene paleoliquefaction features associated with the Charleston Seismic Zone (CSZ) are in Southport, North Carolina. Conditions suitable for liquefaction were identified at 38 sites on both rivers, but only one site was classified as highly susceptible. Stratigraphy consists of Paleozoic gneiss; Cretaceous sandstone/shale; Paleocene mudstone/claystone to Eocene fossiliferous limestone; Quaternary unconsolidated, crossbedded sand and gravel; and Holocene alluvium. Three sets of stratigraphic conditions suitable for liquefaction—unconsolidated source sand beneath capping strata—were identified in detailed examinations at 105 sites: (1) Holocene alluvial sand beneath alluvial silt and clay beds; (2) Quaternary terrace sand beneath beds of silt and clay; and (3) Holocene alluvial sand or Quaternary terrace sand capped by clay-rich Bt soil horizons. Weathered and unconsolidated Cretaceous sand capped by a Bt soil horizon was identified at one site, but the weathered sand is likely too compacted to liquefy readily. One outcrop containing three small sand dikes, and four outcrops of soft-sediment deformation features—mostly load casts—were observed, but none of these features could be conclusively established as seismogenic. A few examples of pseudo-sand-dikes were also identified: sand-filled cypress root casts and pedogenic weathering fronts created the appearance of sand dikes and sills. A comparable survey in 2015 of 119 km of riverbank exposures in the CVSZ yielded 19 paleoliquefaction sites of probable earthquake origin; these features formed from at least one M~6 earthquake in the past 6,000 years (6 ka). This survey in eastern North Carolina revealed no definitive paleoliquefaction features; earthquakes of sufficient magnitude to produce liquefaction likely have not affected this region during the Holocene.

North Carolina↗

Geochemistry of soils along a transect from Central Mexico to the Pacific Coast: a pilot study for continental-scale geochemical mapping

The Mexican Geological Survey (SGM), the National Institute of Statistics, Geography and Informatics (INEGI) and the Autonomous University of San Luis Potosi (UASLP) have established a multidisciplinary team with the objective of creating a national program of geochemical mapping of soils in Mexico. This is being done as part of the North American Soil Geochemical Landscapes Project in partnership with the US Geological Survey and the Geological Survey of Canada. As the first step, a pilot study was conducted over a transect that extends from the Mexico&ndash;US border near Ciudad Juarez in the north to the Pacific Ocean in the south. This pilot transect was conducted in two phases, and this paper presents results from the first phase, which sampled soils at about a 40-km spacing along a 730-km transect beginning in Central Mexico and ending at the Pacific Coast. Samples were collected from the A and C horizons at each site and 60 elements were analyzed. This pilot study demonstrates that geochemical mapping based on a 40-km spacing is adequate to identify broad-scale geochemical patterns. Geologic influence (i.e., soil parent material) was the most important factor influencing the distribution of elements along the transect, followed by the influence of regional mineralization. The study also showed that influence by human activities over the transect is minimal except possibly in large mining districts. A comparison of element abundance in the A horizon with the environmental soil guidelines in Mexico showed that the natural concentrations of the studied soils were lower than the established threshold for soil restoration with the exception of V and As. The former had a median value (75 mg/kg) approximately equal to the value established in Mexico for soil restoration in agricultural and residential lands (78 mg/kg), and the latter had three values higher than the 22 mg/kg threshold for soil restoration in agricultural and residential lands. These cases demonstrate the importance of knowing the national- and regional-scale geochemistry of Mexican soils as a support for the decision-making process, particularly for the proper formulation and application of soil guidelines designed to protect human and ecosystem health.

Applied Geochemistry↗

Integrated monitoring of hydrogeomorphic, vegetative, and edaphic conditions in riparian ecosystems of Great Basin National Park, Nevada

In semiarid regions such as the Great Basin, riparian areas function as oases of cooler and more stable microclimates, greater relative humidity, greater structural complexity, and a steady flow of water and nutrients relative to upland areas. These qualities make riparian areaʼs attractive not only to resident and migratory wildlife, but also to visitors in recreation areas such as Great Basin National Park in the Snake Range, east-central Nevada. To expand upon the system of ten permanent plots sampled in 1992 (Smith et al. 1994) and 2001 (Beever et al. in press ), we established a collection of 31 cross-sectional transects of 50-m width across the mainstems of Strawberry, Lehman, Baker, and Snake creeks. Our aims in this research were threefold: a) map riparian vegetative communities in greater detail than had been done by past efforts; b) provide a monitoring baseline of hydrogeomorphology; structure, composition, and function of upland- and riparianassociated vegetation; and edaphic properties potentially sensitive to management; and c) test whether instream conditions or physiographic variables predicted vegetation patterns across the four target streams. In each of the four watersheds, we performed walking transects from the lower-elevation boundary of the park along creek mainstems to a point well above the point at which vehicle access stopped. In these transects, we ranked, by cover, the riparian and upland woody species on each side of the creek, in 0.32-km segments. These walking transects also facilitated selection of a suite of cross-sectional transects that might serve as an early-warning signal of change for natural (e.g., aggradative) and anthropogenic changes (e.g., due to visitor impacts or climate change). At each cross-sectional transect, we used several methods: a) measurement of the number, approximate volume, and total length of instream logs greater than 10 cm in diameter that were within 5 m up- or downstream of the transect; b) counts of pebbles by size class, following Wolman (1954); c) line-point intercepts, which provided various measures of percent cover; d) gap-intercept transects, following Herrick et al. (in press), to measure susceptibility of uplands to erosion by wind or water; e) 1-m 2 quadrats, to obtain frequency of woody species; f) nested-frequency plots, to measure frequency of all plant species in quadrats of varying size; g) a field-based soil aggregate stability test following Herrick et al. (2001); and h) an impact penetrometer, to measure penetration resistance of soil horizons. We used species-accumulation curves to assess the ability of our methods to detect the majority of plant species at sites, using the most species-rich and species-poor sites as illustrations. We compared characteristics of hydrogeomorphic valley types (designated by Frissell and Liss 1993), vegetation types, and creeks individually and, using multivariate analyses for the first two ʻtypes,ʼ simultaneously. For the latter, using both the nested-frequency and 1-m 2 frequency data, we first used nonmetric multidimensional scaling (NMS) to assess relationships of plant communities among sites. Secondly, we used multi-response permutation procedures (MRPP) to test whether plant-community differences existed among either hydrogeomophic valley types or vegetation types. To increase the value of these comparisons for management, we used indicator species analyses to quantify the indicator value of each individual plant species for separating groups. In contrast to the more incised riparian channels of central Nevada, we observed knickzones, downcutting, and incision only rarely and usually with limited extent in the walking surveys. Downcutting occurred most frequently and extensively in Strawberry and Snake creeks, due in part to their more erodible soils. According to a hydrogeomorphologist with extensive experience in Great Basin riparian systems, the sediment-delivery and hydrologic systems appeared relatively undisturbed in most reaches, with respect to grazing animals and other types of anthropogenic alteration. Site elevation of the 31 transects ranged from 1,950-2,987 m, and stream slope (i.e., gradient) was relatively steep (mean = 9.3%, range 3-16%). Strawberry Creek averaged the lowest maximum water depth, and correspondingly had greatest width/depth ratios. Baker Creek sites averaged the smallest amount of tree-canopy gaps, whereas Snake Creek sites on average had the largest proportion of gaps in understory vegetation. Sites in terrace-bound valley types averaged the lowest slope in the channel as well as the least cover of trees, litter, and vegetation overall, whereas alluviated, boulder-bed canyon sites averaged the greatest widths of the active channel. Sites in Lehman Creek averaged nearly twice as much coarse woody debris as sites from any other creek, whereas Baker Creek sites averaged greatest tree cover (mean = 67%, range 40 &ndash; 96%) and species richness (mean = 17.3 species). Multivariate ordinations suggested that sites in leveed outwash valleys and alluvial-fan-influenced valleys had the greatest inter-site heterogeneity in plant composition, whereas sites in incised moraine-filled valleys appeared most homogeneous. Differences among homogeneity of sites within vegetation types were less pronounced, but sites dominated by either aspen and Woodsʼ rose or narrow-leaved cottonwood had the most similar plant communities among sites of the same vegetation type. A number of species were faithful indicators of various valley and vegetation types, using either set of plant-frequency data. We estimate that all 31 sites could be subsequently re-sampled in 14-18 field days by individuals possessing familiarity of the riparian flora of the southern Snake Range. As with any research, monitoring-focused investigations must balance the concerns for number of ecosystem attributes measured, extensiveness in time and space of sampling periods and locations, and the time and cost of sampling.

Nevada↗

Chemical evaluation of soil-solution in acid forest soils

Soil-solution chemistry is commonly studied in forests through the use of soil lysimeters.This approach is impractical for regional survey studies, however, because lysimeter installation and operation is expensive and time consuming. To address these problems, a new technique was developed to compare soil-solution chemistry among red spruce stands in New York, Vermont, New Hampshire, Maine. Soil solutions were expelled by positive air pressure from soil that had been placed in a sealed cylinder. Before the air pressure was applied, a solution chemically similar to throughfall was added to the soil to bring it to approximate field capacity. After the solution sample was expelled, the soil was removed from the cylinder and chemically analyzed. The method was tested with homogenized Oa and Bs horizon soils collected from a red spruce stand in the Adirondack Mountains of New York, a red spruce stand in east-central Vermont, and a mixed hardwood stand in the Catskill Mountains of New York. Reproducibility, effects of varying the reaction time between adding throughfall and expelling soil solution (5-65 minutes) and effects of varying the chemical composition of added throughfall, were evaluated. In general, results showed that (i) the method was reproducible (coefficients of variation were generally < 15%), (ii) variations in the length of reaction-time did not affect expelled solution concentrations, and (iii) adding and expelling solution did not cause detectable changes in soil exchange chemistry. Concentrations of expelled solutions varied with the concentrations of added throughfall; the lower the CEC, the more sensitive expelled solution concentrations were to the chemical concentrations of added throughfall. Addition of a tracer (NaBr) showed that the expelled solution was a mixture of added solution and solution that preexisted in the soil. Comparisons of expelled solution concentrations with concentrations of soil solutions collected by zero-tension and tension lysimetry indicated that expelled solution concentrations were higher than those obtained with either type of lysimeter, although there was less difference with tension lysimeters than zero-tension lysimeters. The method used for collection of soil solution should be taken into consideration whenever soil solution data are being interpreted.

New York, Vermont↗

Use of soil-streamwater relationships to assess regional patterns of acidic deposition effects in the northeastern USA

Declines of acidic deposition levels by as much as 50% since 1990 have led to partial recovery of surface waters in the northeastern USA but continued depletion of soil calcium through this same period suggests a disconnection between soil and surface water chemistry. To investigate the role of soil-surface water interactions in recovery from acidification, the first regional survey to directly relate soil chemistry to stream chemistry during high flow was implemented in a 4144-km 2 area of the Catskill region of New York, where acidic deposition levels are among the highest in the East. More than 40% of 95 streams sampled in the southern Catskill Mountains were determined to be acidified and had inorganic monomeric aluminum concentrations that exceeded a threshold that is toxic to aquatic biota. More than 80% likely exceeded this threshold during the highest flows, but less than 10% of more than 100 streams sampled were acidified in the northwestern portion of the region. Median Oa horizon soil base saturation ranged from 50% to 80% at 200 sites across the region, but median base saturation in the upper 10 cm of the B horizon was less than 20% across the region and was only 2% in the southern area. Aluminum is likely to be interfering with root uptake of calcium in the mineral horizon in approximately half the sampled watersheds. Stream chemistry was highly variable over the Catskill region and, therefore, did not always reflect the calcium depletion of the B horizon that our sampling suggested was nearly ubiquitous throughout the region. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.

New York↗

Environmental baseline study of the Huron River Watershed, Baraga and Marquette Counties, Michigan

This report summarizes results of a study to establish water-quality and geochemical baseline conditions within a small watershed in the Lake Superior region. In 2008, the U.S. Geological Survey (USGS) completed a survey of water-quality parameters and soil and streambed sediment geochemistry of the 83 mi2 Huron River Watershed in the Upper Peninsula of Michigan. Streamflow was measured and water-quality samples collected at a range of flow conditions from six sites on the major tributaries of the Huron River. All water samples were analyzed for a suite of common ions, nutrients, and trace metals. In addition, water samples from each site were analyzed for unfiltered total and methylmercury once during summer low-flow conditions. Soil samples were collected from 31 sites, with up to 4 separate samples collected at each site, delineated by soil horizon. Streambed sediments were collected from 11 sites selected to cover most of the area drained by the Huron River system. USGS data were supplemented with ecological assessments completed in 2006 by the Michigan Department of Environmental Quality using a modified version of their Great Lakes Environmental Assessment Section procedure 51, and again during 2008 using volunteers under supervision of the Michigan Department of Natural Resources. Results from this study define a hydrological, geological, and environmental baseline for the Huron River Watershed prior to any significant mineral exploration or development. Results from the project also serve to refine the design of future regional environmental baseline studies in the Lake Superior Basin.

Scientific Investigations Report↗

Current advances in coastal wetland elevation dynamics: Introduction to the special issue

The thematic issue entitled, “Current Advances in Coastal Wetland Elevation Dynamics,” draws on topics from two special sessions at the CERF 2021 conference plus additional recent research describing scientific insights gained from the Surface Elevation Table–Marker Horizon (SET–MH) method and its application across the globe to quantify and understand subsurface process influences on wetland elevation change and wetland responses to sea-level rise. The findings group articles within each of five thematic topics. (1) A 30-year retrospective on the scientific insights gained on surface and shallow subsurface process dynamics. (2) Investigations of the subsurface soil process influences on wetland elevation. (3) How the scientific community applies the SET–MH method to quantify and understand wetland responses to RSLR and other environmental drivers such as altered hydrology and sediment supply. (4) How SET–MH data are used in long-term monitoring networks at different geographic scales. (5) Pairing the SET-MH method with (a) survey techniques to increase lateral coverage of wetland elevation trends and (b) geodetic measurements to increase vertical coverage of vertical land motion.

Estuaries and Coasts↗