Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Imaging Technology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources
USGS1974

Hydrogeologic aspects of structural deformation in the northern Gulf of Mexico Basin

The first Earth Resources Technology Satellite (ERTS-1), launched by the National Aeronautics and Space Administration in.July 1972, is providing valuable data for investigations of the most inaccessible and hostile regions of the Earth the Arctic and Antarctic. ERTS images and map products derived from them offer a whole new dimension in source material for multidiscipline investigations in the earth sciences. For the first time scientists can view synoptic, repetitive scenes of the polar regions in four spectral bands. Ongoing experiments funded by NASA and conducted in the U.S. Geological Survey have demonstrated the feasibility of revising coastlines on maps of Antarctica, detected gross changes in the northern limits of the three largest ice shelves in the world, and led to the discovery of uncharted mountain ranges.

Louisiana, Texas↗
USGS2016

Towards establishing compact imaging spectrometer standards

Remote sensing science is currently undergoing a tremendous expansion in the area of hyperspectral imaging (HSI) technology. Spurred largely by the explosive growth of Unmanned Aerial Vehicles (UAV), sometimes called Unmanned Aircraft Systems (UAS), or drones, HSI capabilities that once required access to one of only a handful of very specialized and expensive sensor systems are now miniaturized and widely available commercially. Small compact imaging spectrometers (CIS) now on the market offer a number of hyperspectral imaging capabilities in terms of spectral range and sampling. The potential uses of HSI/CIS on UAVs/UASs seem limitless. However, the rapid expansion of unmanned aircraft and small hyperspectral sensor capabilities has created a number of questions related to technological, legal, and operational capabilities. Lightweight sensor systems suitable for UAV platforms are being advertised in the trade literature at an ever-expanding rate with no standardization of system performance specifications or terms of reference. To address this issue, both the U.S. Geological Survey and the National Institute of Standards and Technology are eveloping draft standards to meet these issues. This paper presents the outline of a combined USGS/NIST cooperative strategy to develop and test a characterization methodology to meet the needs of a new and expanding UAV/CIS/HSI user community.

International Journal of Experimental Spectroscopi↗
USGS1974

The cartographic and scientific application of ERTS-1 imagery in polar regions

The first Earth Resources Technology Satellite (ERTS-1), launched by the National Aeronautics and Space Administration in. July 1972, is providing valuable data for investigations of the most inaccessible and hostile regions of the Earth the Arctic and Antarctic. ERTS images and map products derived from them offer a whole new dimension in source material for multidiscipline investigations in the earth sciences. For the first time scientists can view synoptic, repetitive scenes of the polar regions in four spectral bands. Ongoing experiments funded by NASA and conducted in the U.S. Geological Survey have demonstrated the feasibility of revising coastlines on maps of Antarctica, detected gross changes in the northern limits of the three largest ice shelves in the world, and led to the discovery of uncharted mountain ranges.

Journal of Research of the U.S. Geological Survey↗
USGS2003

Mapping the seabed and habitats in National Marine Sanctuaries - Examples from the East, Gulf and West Coasts

The National Marine Sanctuary System requires seabed and habitat maps to serve as a basis for managing sanctuary resources and for conducting research. NOAA, the agency that manages the sanctuaries, and the USGS have conducted mapping projects in three sanctuaries (Stellwagen Bank NMS, Flower Garden Banks NMS, and Channel Islands NMS) with an emphasis on collaboration of geologists and biologists from the two agencies and from academic institutions. Mapping of seabed habitats is a developing field that requires the integration of geologic and biologic studies and the use of swath imaging techniques such as multibeam and sidescan sonar. Major products of swath mapping are shaded-relief topographic imagery which shows seabed features in great detail, and backscatter imagery which provides an indication of the types of materials that constitute the seabed. Sea floor images provide an excellent basis for conducting the groundtruthing studies (using video, photo, and sampling techniques) that are required to collect the data necessary for making meaningful interpretative maps of the seabed. The compilation of interpretive maps showing seabed environments and habitats also requires the development of a sea floor classification system that will be a basis for comparing, managing, and researching characteristic areas of the seabed. Seabed maps of the sanctuaries are proving useful for management and research decisions that address commercial and recreational fishing, habitat disturbance, engineering projects, tourism, and cultural resources.

Marine Technology Society Journal↗
USGS1991

Monitoring grasshopper and locust habitats in Sahelian Africa using GIS and remote sensing technology

Development programmes in Sahelian Africa are beginning to use geographic information system (GIS) technology. One of the GIS and remote sensing programmes introduced to the region in the late 1980s was the use of seasonal vegetation maps made from satellite data to support grasshopper and locust control. Following serious outbreaks of these pests in 1987, the programme addressed a critical need, by national and international crop protection organizations, to monitor site-specific dynamic vegetation conditions associated with grasshopper and locust breeding. The primary products used in assessing vegetation conditions were vegetation index (greenness) image maps derived from National Oceanic and Atmospheric Administration satellite imagery. Vegetation index data were integrated in a GIS with digital cartographic data of individual Sahelian countries. These near-real-time image maps were used regularly in 10 countries for locating potential grasshopper and locust habitats. The programme to monitor vegetation conditions is currently being institutionalized in the Sahel.

International Journal of Geographical Information ↗
USGS2022

Diatoms.org: Supporting taxonomists, connecting communities

Consistent identification of diatoms is a prerequisite for studying their ecology, biogeography, and successful application as environmental indicators. However, taxonomic consistency among observers has been difficult to achieve because taxonomic information is scattered across numerous literature sources, presenting challenges to the diatomist. Firstly, literature is often inaccessible because of cost or its location in journals that are not widely circulated. Secondly, taxonomic revisions of diatoms are taking place faster than floras can be updated. Finally, taxonomic information is often contradictory across literature sources. These issues can be addressed by developing a content creation community dedicated to making taxonomic, ecological, and image-based data freely available for diatom researchers. Diatoms.org represents such a content curation community, providing open, online access to a vast amount of recent and historical information on North American diatom taxonomy and ecology. The content curation community aggregates existing taxonomic information, creates new content, and provides feedback in the form of corrections and notices of literature with nomenclatural changes. The website not only addresses the needs of experienced diatom scientists for consistent identification but is also designed to meet users at their level of expertise, including engaging the lay public in the importance of diatom science. The website now contains over 1000 species pages contributed by over 100 content contributors, from students to established scientists. The project began with the intent to provide accurate information on diatom identification, ecology, and distribution using an approach that incorporates engaging design, user feedback, and advanced data access technology. In retrospect, the project that began as an ‘extended electronic book’ has emerged not only as a means to support taxonomists, but for practitioners to communicate and collaborate, expanding the size of and benefits to the content curation community. In this paper, we outline the development of diatoms.org , document key elements of the project, examine ongoing challenges and consider the unexpected emergent properties, including the value of diatoms.org as a source of data. Ultimately, if the field of diatom taxonomy, ecology, and biodiversity is to be relevant, a new generation of taxonomists needs to be trained and employed using new tools. We propose that diatoms.org is in a key position to serve as a hub of training and continuity for the study of diatom biodiversity and aquatic conditions.

Diatom Research↗
USGS2020

Advancements towards selective barrier passage by automatic species identification: Applications of deep convolutional neural networks on images of dewatered fish

Invasive species negatively affect enterprises such as fisheries, agriculture, and international trade. In the Laurentian Great Lakes Basin, threats include invasive sea lamprey ( Petromyzon marinus ) and the four major Chinese carps. Barriers have proven to be an effective mechanism for managing invasive species but are detrimental in that they also limit the migration of desirable, native species. Fish passage technologies that selectively pass desirable species while blocking undesirable species are needed. Key to an automated selective barrier passage system is a high precision fish classifier to assign fish to be passed or blocked. Presented is an evaluation of two classifiers developed using images of partially dewatered fish captured from a commercial, high-speed camera array. For a lamprey vs. non-lamprey classification task, an ensemble prediction approach achieved near perfect accuracy on both a validation and test dataset. For a species classification task for 13 species found in the Great Lakes region, an ensemble prediction approach achieved accuracies of 96% and 97% on a validation and test dataset, respectively. Both prediction approaches were based on deep convolutional neural networks constructed using transfer learning and image augmentation. The study provides an important proof-of-concept for the viability in fully automated, selective fish passage systems.

Illinois, Michigan,Ohio↗
USGS1975

Information through color imagery

The color-sensing capability of the human eye is a powerful tool. In remote sensing we should use color to display data more meaningfully, not to re-create the scene. Color disappears with distance, and features change color with viewing angle. Color infrared film lets us apply color with additional meaning even though we introduce a false color response. Although the marginal gray scale on an ERTS (Earth Resources Technology Satellite) image may indicate balance between the green, red, and infrared bands, and although each band may be printed in a primary color, tests show that we are not fully applying the three primary colors. Therefore, contrast in the green band should be raised. For true three-color remote sensing of the Earth, we must find two generally meaningful signatures in the visible spectrum, or perhaps extend our spectral range. Before turning to costly digital processing we should explore analog processing. Most ERTS users deal with relative spectral radiance; the few concerned with absolute radiance could use the computer-compatible tapes or special annotations. NASA (National Aeronautics and Space Administration), which assigns the range and contrast to the ERTS image, controls processing and could adjust the density range for maximum contrast in any ERTS scene. NASA cannot alter processing for local changes in reflective characteristics of the Earth but could adjust for Sun elevation and optimize the contrast in a given band.

Journal of Research of the U.S. Geological Survey↗
USGS2015

A comparison between boat-based and diver-based methods for quantifying coral bleaching

Recent increases in both the frequency and severity of coral bleaching events have spurred numerous surveys to quantify the immediate impacts and monitor the subsequent community response. Most of these efforts utilize conventional diver-based methods, which are inherently time-consuming, expensive, and limited in spatial scope unless they deploy large teams of scientifically-trained divers. In this study, we evaluated the effectiveness of the Along-Track Reef Imaging System (ATRIS), an automated image-acquisition technology, for assessing a moderate bleaching event that occurred in the summer of 2011 in the Florida Keys. More than 100,000 images were collected over 2.7 km of transects spanning four patch reefs in a 3-h period. In contrast, divers completed 18, 10-m long transects at nine patch reefs over a 5-day period. Corals were assigned to one of four categories: not bleached, pale, partially bleached, and bleached. The prevalence of bleaching estimated by ATRIS was comparable to the results obtained by divers, but only for corals > 41 cm in size. The coral size-threshold computed for ATRIS in this study was constrained by prevailing environmental conditions (turbidity and sea state) and, consequently, needs to be determined on a study-by-study basis. Both ATRIS and diver-based methods have innate strengths and weaknesses that must be weighed with respect to project goals.

Florida↗
USGS2006

Spirit rover localization and topographic mapping at the landing site of Gusev crater, Mars

By sol 440, the Spirit rover has traversed a distance of 3.76 km (actual distance traveled instead of odometry). Localization of the lander and the rover along the traverse has been successfully performed at the Gusev crater landing site. We localized the lander in the Gusev crater using two-way Doppler radio positioning and cartographic triangulations through landmarks visible in both orbital and ground images. Additional high-resolution orbital images were used to verify the determined lander position. Visual odometry and bundle adjustment technologies were applied to compensate for wheel slippage, azimuthal angle drift, and other navigation errors (which were as large as 10.5% in the Husband Hill area). We generated topographic products, including 72 ortho maps and three-dimensional (3-D) digital terrain models, 11 horizontal and vertical traverse profiles, and one 3-D crater model (up to sol 440). Also discussed in this paper are uses of the data for science operations planning, geological traverse surveys, surveys of wind-related features, and other science applications.

Journal of Geophysical Research E: Planets↗
USGS2025

Practical application of time-lapse camera imagery to develop water-level data for three hydrologic monitoring sites in Wisconsin during water year 2020

Using camera imagery to measure water level (camera-stage) is a well-researched area of study. Previous camera-stage studies have shown promising results when implementing this technology with tight constraints on test conditions. However, there is a need for a more comprehensive evaluation of the extensibility of camera-stage to practical applications. Therefore, the aim of this study was to test a camera-stage method under a wide variety of test conditions to better understand the successes and challenges of using this technology in real-world scenarios. In this study, this approach was tested during Water Year 2020 at three existing U.S. Geological Study (USGS) stream gaging stations in south central Wisconsin that had existing USGS water-level instrumentation. The specific reference objects tested were white pipes and a concrete wall. Since successful application of camera-stage relies on use of suitable images, all captured images in this study were visually inspected to determine suitability for application of camera-stage. Camera-stage measurements were then computed only on images deemed suitable and the results were compared with ground-truth stage values to determine the accuracy. For the purposes of this study, camera-stage values within ±0.10 ft of the actual stage were considered acceptable. One major challenge highlighted was the potential difficulty in obtaining suitable imagery, with the proportion of suitable images varying greatly between the four trials from 38 % to 92 %. The results from applying camera-stage to suitable images were encouraging though, with 79 % to 99 % of evaluated camera-stage values qualifying as acceptable among the four test trials.

Wisconsin↗
USGS2007

The need for sustained and integrated high-resolution mapping of dynamic coastal environments

The coastal zone of the United States is a dynamic environment evolving in response to both natural processes and human activities. In order to protect coastal populations and resources, a detailed understanding of the physical setting and of the processes responsible for change is required. A sustained program of mapping coastal areas provides a means to establish baseline conditions, document change, and, in conjunction with models of physical processes, predict future behavior. Recent advances in mapping technology, including airborne lidars and hyperspectral imagers, allow for the rapid collection of high-resolution elevation data and land use information on a national scale. These rich data sets are critical to evaluating risk associated with coastal hazards, such as flooding during extreme storms. For example, coastal elevation data is a fundamental parameter in storm surge models that predict where flooding will occur, and land use maps serve as the foundation of assessments that identify the resources and populations that are most vulnerable. A comprehensive, national coastal mapping plan that is designed to collect, manage, and distribute these data, as well as to take advantage of recent progress in mapping technology, will provide a wealth of information for studying the processes of physical change, for determining areas vulnerable to coastal hazards, and for protecting and managing our coastal communities and resources.

Marine Technology Society Journal↗
USGS1975

Applications of remote sensing to structural interpretations in the southern Appalachians

Remote sensing is the technology of studying distant objects by measuring and recording energy from one or more segments of the electromagnetic spectrum. Imaging sensors which operate from medium- and high-altitude aircraft or from spacecraft can provide a synoptic view of large areas and of surface phenomena not evident in the field. Image-acquiring systems and instruments have been designed to partially automate data collection and to reduce the time devoted to analysis, information extraction, and detection of changes of surface phenomena. Among these phenomena are the surface distribution of heat, moisture, snow, water, vegetation, and cultural features. When coupled with ancillary data, including field surveys, sensor data provide useful information for the recognition and mapping of regional structure, jointing patterns, drainage patterns, fault and fracture traces, and rock types. The recognition of several major linear surface features, two of which proved to be traces of previously unrecognized faults (the Canebrake and the Coeburn faults) in the Appalachian Plateaus, demonstrates the pragmatic application of aircraft and spacecraft remote sensing to geological investigations in the Appalachians.

Virginia, West Virginia↗
USGS2009

An automated imagery orthorectification pilot

Automated orthorectification of raw image products is now possible based on the comprehensive metadata collected by Global Positioning Systems and Inertial Measurement Unit technology aboard aircraft and satellite digital imaging systems, and based on emerging pattern-matching and automated image-to-image and control point selection capabilities in many advanced image processing systems. Automated orthorectification of standard aerial photography is also possible if a camera calibration report and sufficient metadata is available. Orthorectification of historical imagery, for which only limited metadata was available, was also attempted and found to require some user input, creating a semi-automated process that still has significant potential to reduce processing time and expense for the conversion of archival historical imagery into geospatially enabled, digital formats, facilitating preservation and utilization of a vast archive of historical imagery. Over 90 percent of the frames of historical aerial photos used in this experiment were successfully orthorectified to the accuracy of the USGS 100K base map series utilized for the geospatial reference of the archive. The accuracy standard for the 100K series maps is approximately 167 feet (51 meters). The main problems associated with orthorectification failure were cloud cover, shadow and historical landscape change which confused automated image-to-image matching processes. Further research is recommended to optimize automated orthorectification methods and enable broad operational use, especially as related to historical imagery archives.

Journal of Remote Sensing↗
USGS2018

Full-range, solar-reflected hyperspectral microscopy to support earth remote sensing research

Over the past 20 years, hyperspectral microscopy has grown into a robust field of analysis for a number of applications. The visible to near-infrared (VNIR; 400 to 1000 nm) region of the spectrum has demonstrated utility for the characterization of healthy and diseased tissue and of biomolecular indicators at the cellular level. Here, we describe the development of a hyperspectral imaging (HSI) microscope that is aimed at material characterization to complement traditional stand-off, earth remote sensing with hyperspectral sensors. We combine commercial off the shelf technology to build an HSI microscope to collect spectral data with illumination provided by a tunable laser. Hyperspectral imaging microscopy (HIM) facilitates detailed examination of target materials at the subcentimeter spatial scale. The custom-built, laser illumination HSI microscope covers the NIR to shortwave infrared (NIR/SWIR; 900 to 2500 nm) solar-reflected spectral range. It is combined with a separate VNIR sensor (400 to 900 nm) that utilizes quartz–tungsten–halogen lamps for illumination. The combined sensors provide a means to collect <10,000 s of spectra in the full VNIR/SWIR spectral range from both pure substances and precisely engineered linear and nonlinear mixtures. The large abundance of spectra allows for a more detailed understanding of the variability and multivariate probability distributions of spectral signatures. This additional information aids in understanding the variability observed in ground truth spectra collected from portable spectrometers, and it greatly enhances sample description and metadata content. In addition, HIM data cubes can serve as proxies, as “microscenes,” for systems engineering applications such as trade studies for HSI acquired by air- and space-borne sensors.

Journal of Applied Remote Sensing↗
USGS1996

Preflight and in-flight calibration plan for ASTER

Preflight and in-flight radiometric calibration plans are described for the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) that is a multispectral optical imager of high spatial resolution. It is designed for the remote sensing from orbit of land surfaces and clouds, and is expected to be launched in 1998 on NASA's EOS AM-I spacecraft. ASTER acquires images in three separate spectral regions, the visible and near-infrared (VNIR), the shortwave infrared (SWIR), and the thermal infrared (TIR) with three imaging radiometer subsystems. The absolute radiometric accuracy is required to be better than 4% for VNIR and SWIR radiance measurements and 1 to 3 K, depending on the temperature regions from 200 to 370 K, for TIR temperature measurements. A reference beam is introduced at the entrance pupil of each imaging radiometer to provide the in-flight calibration. Thus, the ASTER instrument includes internal onboard calibration units that comprise incandescent lamps for the VNIR and SWIR and a blackbody radiator for the TIR as reference sources. The calibration reliability of the VNIR and SWIR is enhanced by a dual system of onboard calibration units as well as by high-stability halogen lamps. A ground calibration system of spectral radiances traceable to fixed-point blackbodies is used for the preflight VNIR and SWIR calibration. Because of the possibility of nonuniform contamination effects on the partial-aperture onboard calibration, it is desirable to check their results with respect to other methods. Reflectance- and radiance-based vicarious methods have been developed for this purpose. These, and methods involving in-flight cross-calibration with other sensors are also described.

Journal of Atmospheric and Oceanic Technology↗
USGS2010

Hyperspectral analysis of columbia spotted frog habitat

Wildlife managers increasingly are using remotely sensed imagery to improve habitat delineations and sampling strategies. Advances in remote sensing technology, such as hyperspectral imagery, provide more information than previously was available with multispectral sensors. We evaluated accuracy of high-resolution hyperspectral image classifications to identify wetlands and wetland habitat features important for Columbia spotted frogs (Rana luteiventris) and compared the results to multispectral image classification and United States Geological Survey topographic maps. The study area spanned 3 lake basins in the Salmon River Mountains, Idaho, USA. Hyperspectral data were collected with an airborne sensor on 30 June 2002 and on 8 July 2006. A 12-year comprehensive ground survey of the study area for Columbia spotted frog reproduction served as validation for image classifications. Hyperspectral image classification accuracy of wetlands was high, with a producer's accuracy of 96 (44 wetlands) correctly classified with the 2002 data and 89 (41 wetlands) correctly classified with the 2006 data. We applied habitat-based rules to delineate breeding habitat from other wetlands, and successfully predicted 74 (14 wetlands) of known breeding wetlands for the Columbia spotted frog. Emergent sedge microhabitat classification showed promise for directly predicting Columbia spotted frog egg mass locations within a wetland by correctly identifying 72 (23 of 32) of known locations. Our study indicates hyperspectral imagery can be an effective tool for mapping spotted frog breeding habitat in the selected mountain basins. We conclude that this technique has potential for improving site selection for inventory and monitoring programs conducted across similar wetland habitat and can be a useful tool for delineating wildlife habitats. ?? 2010 The Wildlife Society.

Journal of Wildlife Management↗
USGS2013

Applying UV cameras for SO 2 detection to distant or optically thick volcanic plumes

Ultraviolet (UV) camera systems represent an exciting new technology for measuring two dimensional sulfur dioxide (SO 2 ) distributions in volcanic plumes. The high frame rate of the cameras allows the retrieval of SO 2 emission rates at time scales of 1 Hz or higher, thus allowing the investigation of high-frequency signals and making integrated and comparative studies with other high-data-rate volcano monitoring techniques possible. One drawback of the technique, however, is the limited spectral information recorded by the imaging systems. Here, a framework for simulating the sensitivity of UV cameras to various SO 2 distributions is introduced. Both the wavelength-dependent transmittance of the optical imaging system and the radiative transfer in the atmosphere are modeled. The framework is then applied to study the behavior of different optical setups and used to simulate the response of these instruments to volcanic plumes containing varying SO 2 and aerosol abundances located at various distances from the sensor. Results show that UV radiative transfer in and around distant and/or optically thick plumes typically leads to a lower sensitivity to SO 2 than expected when assuming a standard Beer–Lambert absorption model. Furthermore, camera response is often non-linear in SO 2 and dependent on distance to the plume and plume aerosol optical thickness and single scatter albedo. The model results are compared with camera measurements made at Kilauea Volcano (Hawaii) and a method for integrating moderate resolution differential optical absorption spectroscopy data with UV imagery to retrieve improved SO 2 column densities is discussed.

Journal of Volcanology and Geothermal Research↗