Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Hazardous Materials”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,660 records · Page 17Linked to original sources
USGS2024

Bathymetric and velocimetric surveys at highway bridges crossing the Missouri and Mississippi Rivers on the periphery of Missouri, June 13–22, 2022

Bathymetric and velocimetric data were collected by the U.S. Geological Survey, in cooperation with the Missouri Department of Transportation, near seven bridges at six highway crossings of the Missouri and Mississippi Rivers on the periphery of Missouri from June 13–22, 2022. A multibeam echosounder mapping system was used to obtain channel-bed elevations for river reaches about 1,640 feet longitudinally and generally extending laterally across the active channel from bank to bank during minor flood-flow conditions. These surveys provided channel geometry and hydraulic conditions at the time of the surveys and provided characteristics of scour holes that may be useful in developing or verifying predictive guidelines or equations for computing potential scour depth. These data also may be useful to the Missouri Department of Transportation as a minor flood-flow assessment of the bridges for stability and integrity issues with respect to bridge scour during floods. Bathymetric data were collected around every in-channel pier. Scour holes were present at most piers for which bathymetry could be obtained, except those on banks or surrounded by riprap. Occasionally, scour holes were minor and difficult to discern from nearby dunes and ripples. All bridge sites in this study were surveyed and documented in previous studies. Although partial exposure of substructural support elements was observed at several piers, at most sites the exposure most likely is minimal compared to the overall substructure that remains buried in bed material at these piers. The notable exceptions are piers 12 and 13 at structure L0135 on State Highway 51 at Chester, Illinois, where the bedrock material was fully exposed around the piers. The average difference between the bathymetric surfaces between 2022 and 2018 varied from 0.41 foot higher to 1.86 feet lower. Between 2022 and 2014, the average difference between the bathymetric surfaces varied from 1.02 feet higher to 4.69 feet lower. Only the two sites on the Missouri River and the Caruthersville site were surveyed in 2011; for those sites, the average difference between the bathymetric surfaces varied from 5.83 feet higher to 1.34 feet lower. The most substantial overall net gain of sediment in a reach was between 2011 and 2022 at structure A1700 near Caruthersville, Mo. (site 38). This result was expected because structure A1700 is downstream from the confluences of the Missouri and Ohio Rivers, and therefore subject to the largest streamflows, the largest streamflow fluctuations, and the most substantial sediment flux, as has historically been observed at this site. The presence of riprap blankets, pier size and nose shape, and alignment to flow had a substantial effect on the size of the scour hole observed for a given pier. Piers that were surrounded by riprap blankets had scour holes that were substantially smaller (to nonexistent) compared to piers at which no rock or riprap were present. New riprap blankets were surveyed at pier 3 of structure L0098 at Brownville, Nebraska, and at piers 15–18 of structure A1700 near Caruthersville, Mo., that effectively mitigated the scour holes historically observed at these piers. Narrow piers having round or sharp noses that were aligned with flow often had scour holes that were difficult to discern from nearby bed features, whereas piers having wide or blunt noses resulted in larger, deeper scour holes. Several of the structures had piers that were skewed to primary approach flow. Scour holes near these piers consistently displayed greater depth on the side of the pier with impinging flow and deposition on the leeward side of the pier.

Missouri↗
USGS2026

Albuquerque Seismological Laboratory strategic vision

This circular presents a strategic outlook for the U.S. Geological Survey (USGS) Albuquerque Seismological Laboratory (ASL) for the next 10 years (2026–36). The ASL is a USGS field office in the Geological Hazards Science Center that operates portions of the Advanced National Seismic System and the Global Seismographic Network and focuses on fundamental research for instrumentation testing and data quality. The strategic outlook is categorized into two types of tasks: “Foundational Tasks” and “Aspirational Tasks.” Foundational Tasks are those that maintain the laboratory’s basic operations and services, including regional and global seismic monitoring, improving data quality, and providing instrument testing and support. A suite of Aspirational Tasks is also articulated; these can be considered priority targets of ASL that could improve ASL’s seismic monitoring capabilities and mission. Such tasks include improvements to remote stations, testing capabilities of nonseismic geophysical instruments, detection threshold monitoring, rapid aftershock deployments, and expanding seismic monitoring networks. This report was written with input from the USGS Geological Hazards Science Center, the USGS Earthquake Hazards Program (EHP), and colleagues with an interest in the work done by the ASL. Although the details of these tasks may change, this document can provide guidance on the overarching tasks at the ASL from 2026 to 2036 and an overview of the various components of the ASL and how they fit into the EHP and the Global Seismographic Network Program.

Circular↗
USGS2026

Determining Volcanic Risk in Auckland (DEVORA) Research Programme—A transdisciplinary approach to address the challenge of distributed volcanism in an urban environment

The Determining Volcanic Risk in Auckland (DEVORA) Research Programme was launched in 2008 to address the challenges associated with monogenetic volcanism in an urban setting and to enhance volcanic risk management in Tāmaki Makaurau Auckland in Aotearoa New Zealand. It is a multi-agency, increasingly transdisciplinary (defined here as research that transcends traditional disciplinary boundaries by integrating diverse types of knowledge, perspectives, and methods from academic and non-academic participants to create novel solutions to complex problems), and collaborative research program jointly led by Waipapa Taumata Rau University of Auckland and Earth Sciences New Zealand (ESNZ; formerly GNS Science), with core funding from Natural Hazards Commission Toka Tū Ake (NHC; formerly the Earthquake Commission, EQC) and Te Kaunihera o Tāmaki Makaurau Auckland Council (AC). The primary research focus of DEVORA is to investigate the geologic history, volcanic hazards, and risk posed by the basaltic intraplate Auckland Volcanic Field. Disruption from ash fall and gas from other Aotearoa New Zealand volcanoes is also considered. DEVORA’s work to explore exposure and vulnerability in Tāmaki Makaurau Auckland is also useful for assessing risks from other non-volcanic natural hazards, such as seismic and tsunami hazards. The greater Tāmaki Makaurau Auckland region has an ethnically and socio-economically diverse population of approximately 1.7 million, representing about one-third of the Aotearoa New Zealand population, and hosts critical infrastructure of national significance. The size and nature of the populace, consequential economic base, and important infrastructure within Tāmaki Makaurau Auckland mean that the effects of a volcanic eruption would be felt nationally, including through the disruption of air travel to Aotearoa New Zealand. The hazards from such an eruption could potentially affect hundreds of thousands of people, businesses, and lifelines (critical infrastructure). A considerable challenge for emergency and risk managers is the monogenetic nature of the volcanic field. It is not known where or when the next eruption will occur, how much warning we may get before an eruption, nor how an eruption and its effects might unfold. In this contribution, we highlight the concept and collaborative intent of the DEVORA Programme and show how it has evolved over the 16 years since its inception. We describe how DEVORA has unified more than 100 researchers (including more than 50 graduate students) and numerous stakeholders to address key issues facing Tāmaki Makaurau Auckland and describe how research findings are being implemented into policy and communicated to stakeholder agencies and the public. We also illustrate the broader influence of the DEVORA Programme and provide some learnings that might benefit others embarking on similar integrated projects, especially those focused on distributed volcanism in and near populated areas.

Auckland↗
USGS2024

Status and understanding of groundwater quality in the Mojave Basin Domestic-Supply Aquifer study unit, 2018—California GAMA Priority Basin Project

Groundwater quality in the western part of the Mojave Desert in San Bernardino County, California, was investigated in 2018 as part of the California State Water Resources Control Board Groundwater Ambient Monitoring and Assessment Program Priority Basin Project. The Mojave Basin Domestic-Supply Aquifer study unit (MOBS) region was divided into two study areas—floodplain and regional—to assess differences between the two major aquifers used for drinking water supply in the area. This assessment characterized the quality of ambient groundwater and not the quality of treated drinking water. The study included three components: (1) a status assessment, which characterized the quality of groundwater resources used for domestic drinking-water supply in the floodplain and regional study areas; (2) a brief understanding assessment, which evaluated factors that could potentially affect the quality of groundwater used by domestic wells in the region; and (3) a comparative assessment between the groundwater resources used by domestic wells and public-supply wells in the two study areas. The domestic-well assessment was based on data collected by the U.S. Geological Survey from 48 domestic wells in January–May 2018. The public-supply assessment was based on data for samples from 322 public-supply wells in 2008–18, either collected by the U.S. Geological Survey or compiled from the California State Water Resources Control Boards Division of Drinking Water publicly available database. Concentrations of water-quality constituents in ambient groundwater were compared to regulatory and non-regulatory benchmarks typically used by the State of California and Federal agencies as health-based or aesthetic standards for public drinking water. Relative concentrations, defined as the measured concentration divided by the benchmark concentration, were classified as high (greater than 1.0), moderate (greater than 0.5 for inorganic constituents or 0.1 for organic and special-interest constituents, and not high), or low (concentrations lower than moderate). The floodplain and regional study areas were divided into 15 and 35 grid cells, respectively, and grid-based methods were used to compute the areal proportions of the two study areas with high, moderate, or low relative concentrations of individual constituents and classes of constituents. For the domestic-supply assessment, one or more inorganic constituents with health-based benchmarks were detected at high relative concentrations in 58 percent of the regional study area and 13 percent of the floodplain study area. The inorganic constituents with health-based benchmarks detected at high relative concentrations in the regional study area were arsenic, chromium and hexavalent chromium, fluoride, adjusted gross alpha particle activity, uranium, molybdenum, strontium, and nitrate; only arsenic was detected at high relative concentrations in the floodplain study area. One or more inorganic constituents with secondary maximum contaminant level benchmarks were detected at high concentrations in 15 and 6.7 percent of the regional and floodplain study areas, respectively. The constituents detected at high relative concentrations in the regional study area were total dissolved solids, chloride, sulfate, and iron; only total dissolved solids and sulfate were detected at high relative concentrations in the floodplain study area. Organic constituents were not detected at moderate or high relative concentrations in either the regional or floodplain study areas. Volatile organic compounds were detected at low relative concentrations in 21 and 27 percent of the regional and floodplain study areas, respectively, and pesticides were detected at low relative concentrations in 9.1 and 20 percent of the regional and floodplain study areas, respectively. The only individual organic constituent detected in more than 10 percent of either study area was the trihalomethane trichloromethane. Total coliform bacteria were detected in 15 and 27 percent of the grid wells in the regional and floodplain study areas, respectively. The greater prevalence of high relative concentrations of many inorganic constituents in the regional study area compared to the floodplain area likely indicates the greater diversity of geologic material at depth in aquifer material and generally finer-grained alluvium compared to the floodplain study area combined with generally older groundwater that has had more contact time with aquifer materials. In general, trace element concentrations (1) increased with increasing groundwater age, (2) increased with distance from recharge sources in the mountains, and (3) increased with closer proximity to some types of geological units. In general, groundwater from domestic wells in the floodplain study area is young, with most samples containing a component of modern groundwater based on tritium and unadjusted carbon-14 activities, whereas groundwater from domestic wells in the regional study area generally is old, with most samples having unadjusted carbon-14 ages of 5,000–40,000 years. Public-supply wells in MOBS generally were deeper than domestic wells and presumably are in contact with older, more weathered alluvium that may have more mobile trace elements, such as arsenic or uranium. However, only 26 percent of the public-supply regional study area had high relative concentrations of inorganic constituents, compared to 58 percent for the domestic regional study area. The percentages of the public-supply and domestic floodplain study areas with high relative concentrations of inorganic constituents were 11 and 13 percent, respectively. The ages of groundwater used by public-supply and domestic wells in each study area were similar, which was not expected given the greater depth of the public-supply wells. Three potential factors may contribute to these results: (1) greater spatial footprint of domestic well network, which may result in domestic wells pumping groundwater from fractured bedrock or mineralized areas not used by public-supply wells; (2) greater pumping rates in public-supply wells, resulting in more water being withdrawn from coarse-grained, heterogeneous alluvium than finer-grained layers, which may have higher concentrations of (or more mobile) inorganic constituents; and (3) a greater degree of well management with public-supply wells, which may include pausing use of or decommissioning wells if treating or blending water is not feasible to lower constituent concentrations.

California↗
USGS2025

Forecast, monitor, adapt: A multi-agency strategy to protect people from postfire debris flows

In 2020, a wildfire burned across Glenwood Canyon in Colorado, USA. A history of postfire debris flows in the region and a hazard assessment for the burn area indicated that potentially life-threatening debris flows could be triggered by rainfall within months of a wildfire. As a result, four government agencies evaluated strategies to help mitigate hazards, including the loss of human life, that may be associated with debris-flow events. After the fire, 26 large debris flows occurred in the summer of 2021 and three sediment-laden flows occurred in the summer of 2023, but there were no major injuries or fatalities reported. We found that integrating hazard assessment/ forecasting, monitoring, and adaptation scenarios was a successful strategy for reducing postfire debris-flow risks to human life (including injuries and fatalities). Weather forecasts and estimates of debris-flow triggering rainfall thresholds, likelihood, and volume were used to anticipate the timing, location, and magnitude of debris-flow events. Rainfall monitoring and detailed recordkeeping of storms that triggered debris flows were used to validate and update debris-flow warning thresholds that varied with time following the wildfire. Although the governmental agencies working in this burn area had distinct and differing agency mandates, they were able to integrate information to reduce the risk of debris-flow events to human life.

Colorado↗
USGS2025

Long‐period ground motions from dynamic rupture simulations of large earthquakes on the creeping Hayward–Calaveras–Rodgers Creek fault system

he Hayward, Calaveras, and Rodgers Creek faults in the San Francisco Bay region of California have a high probability of producing a large earthquake in the next decades. Although these faults creep, the creep is insufficient to keep up with their relatively rapid slip rates on their deepest sections, so they have been storing tectonic strain since their last large earthquakes, with the Hayward’s and Rodgers Creek’s more than 150 yr ago. We do not know what the next large Hayward–Calaveras–Rodgers Creek earthquakes will look like or how strongly they will shake the San Francisco Bay region. Harris et al. (2021) used the 3D dynamic (spontaneous) rupture method to simulate large earthquakes on these creeping faults. In this article, we examine the resulting simulated long‐period ( T > 1 s) ground shaking from 0 to 50 km distance, for earthquakes nucleating on the Hayward fault and earthquakes nucleating on the Rodgers Creek fault. We compare these simulated long‐period ground motions with the Boore et al. (2014) well‐established empirically based ground‐motion model suitable for the slowest material velocity in our 3D velocity structure. We find that the simulated long‐period ground motions from the creeping‐fault earthquake scenarios produce a reasonable agreement with the empirical expectations if frictional cohesion is included only where it is appropriate.

California↗
USGS2025

Preliminary depth to basement modeling at Salton Sea, California

The San Andreas Fault – Imperial Fault (SAF-IF) transtensional step-over zone along the southern margin of the Salton Sea hosts substantial geothermal production and lithium brine resources. Recent volcanism at the Salton Buttes and active seismicity along the SAFIF fault system highlight active tectonic and magmatic processes that pose natural hazards and may impact energy and mineral production. Characterizing the subsurface architecture and extent of concealed alteration associated with this tectono-magmatic system enhances understanding of these active processes, associated hazards, and resources. We have compiled a gravity database, consisting of new and re-processed existing data, from which we have constructed a new isostatic residual gravity anomaly map of the Salton trough. We have used this new gravity dataset together with a compilation of publicly available borehole data to develop new depth to basement inversion models for the region. These depth to basement models help to constrain basin geometries, inform alteration mapping, and reveal variations in basement rocks. Due to the concealed nature of the complex tectonic framework at the Salton trough, it is necessary to utilize geophysical methods for subsurface characterization. These new depth to basement models are a first step toward constructing 2D and 3D geophysical and geologic models of the Imperial Valley and Salton Sea geothermal area. This analysis complements other geophysical initiatives, including magnetotelluric (MT) modeling (Tokmakoff et al., 2024), magnetic mapping (Glen and Earney, 2023, 2024) and potential field modeling, and seismic studies focused on hazard and resource investigations in the Imperial Valley.

California↗
USGS2026

Low-frequency earthquakes track the motion of a captured slab fragment

Accurate tectonic models are essential for assessing seismic hazard and fault interactions. However, the plate configuration at the complex Mendocino triple junction, where the San Andreas Fault and the Cascadia subduction zone meet, remains uncertain. We analyzed fault slip associated with a recently identified zone of tectonic tremor and low-frequency earthquakes (LFEs) near the southern edge of the subducting Gorda slab. Based on tidal sensitivity and P-wave first motions, we show that the LFEs are generated by dipping, strike-slip motion. This suggests that a former Farallon slab fragment, now captured by the Pacific plate, is translating northward beneath westernmost North America. This geometry effectively extends the slab interface fault, challenging prevailing interpretations of slab window formation and creating a potential unaccounted earthquake hazard in this region.

Science↗
USGS2025

Three-dimensional seismic velocity models for the San Francisco Bay region, California from joint body-wave and surface-wave tomography validated by waveform simulation

A high-resolution seismic velocity model for both P and S waves is essential for the San Francisco Bay (SFB) region to accurately simulate earthquake ground motions and assess seismic hazards in this high-risk region. We present new three-dimensional P-wave and S-wave velocity (Vp and Vs) models of the SFB region developed using joint tomographic inversion with a rich set of earthquake and active-source body-wave data and ambient-noise surface-wave data. We designed a dynamic balance strategy to effectively balance the contributions of body-wave and surface-wave data during each iteration of the inversion. Owing to the complementary resolution of body-wave and surface-wave data, our new models are significantly improved compared to previous tomographic models. Major geologic features in the SFB region, including low-velocity basins, high-velocity Franciscan Complex, granite, and gabbro rocks, and across-fault velocity contrasts, are imaged in our Vp and Vs models. Compared to the geology-based U.S. Geological Survey velocity model, our new model has better defined structures for some important areas that are of great concern for seismic hazard assessment, such as the Sacramento-San Joaquin Delta, and the 2014 magnitude 6.0 South Napa earthquake area. We validated our model by simulating waveforms for a set of moderate-magnitude earthquakes. The good performance of our model in waveform simulation indicates its potential for improving ground motion simulation and seismic hazard assessment in the SFB region.

California↗
USGS2026

Core microbiomes as a potential fingerprinting method of Western USA dust sources

Introduction: Changing frequency and intensity of dust emissions impacts ecosystems and human health. Dust carries microbes, nutrients, heavy metals, and other materials that may change environmental biogeochemistry at deposition sites. Identifying dust sources provides key information on where and when mitigation strategies should be employed. However, commonly used geochemical or isotopic tracers are often not capable of distinguishing between geographic regions. Methods: We explored whether soil bacterial communities may provide distinct fingerprints of dust sources in the western United States. We identified bacterial core communities of dust from ten locations monitored by the National Wind Erosion Research Network (NWERN) with varied land use (cropland, rangeland, and playa), and compared communities to location, soil, and regional characteristics. Samples were collected monthly from Modified Wilson and Cooke (MWAC) samplers, composited by season (spring, summer, and fall), and analyzed using 16S rRNA sequencing. Results: We found distinct bacterial core communities that reflected dust source characteristics. In order of importance, precipitation levels ( p = 0.0001), location ( p = 0.0001), soil texture ( p = 0.0001), seasonality ( p = 0.0001), and elevation (p = 0.0002) were correlated with bacterial community composition. Discussion: Distinct bacterial core communities were associated with site characteristics such as biocrusts, playas, and military base proximity. Our results suggest that the use of core microbiomes may offer a fingerprinting method to identify dust source regions.

Colorado, Nevada, New Mexico, North Dakota, Oklaho↗
USGS2025

A new groundwater energy transport model for the MODFLOW hydrologic simulator

Heat transport in the subsurface is an important aspect of research related to the effects of a warming climate on ecological services (i.e., cold-water refugia); the development of geothermal resources for energy banking schemes (i.e., aquifer thermal energy storage [ATES]); and the effects of temperature on other aspects of groundwater quality, such as nutrient cycling. Historically, simulation of heat transport using the MODFLOW groundwater simulator and related codes was performed by scaling the input parameters of a solute-transport model to emulate heat transport. However, that approach required additional pre- and post-processing of input and output and could not account for the variation in effective thermal storage and transport properties during transient, unsaturated flow, for example. True heat-transport capabilities in the context of MODFLOW were first introduced in a variant called USG-Transport. More recently, a new groundwater energy-transport (GWE) model type has been added to MODFLOW 6, the core version of the MODFLOW hydrologic simulator. GWE supports the simulation of heat transport on structured or unstructured grids as well as within and between features of advanced packages that represent streams, lakes, multi-aquifer wells, and the unsaturated zone. GWE is integrated within MODFLOW 6 and is accessible through the FloPy Python package and the MODFLOW 6 application programming interface (API). An example simulation demonstrates conduction between grid cells through both the water and the solid aquifer material, including thermal bleeding from saturated overburden cells into a groundwater flow field.

Groundwater↗
USGS2025

U.S. Geological Survey geomagnetic variometer data: Capitalizing on seismic infrastructure

The U.S. Geological Survey’s Geomagnetism Program is collaborating with the Earthquake Hazards Program and Global Seismographic Network Program to densify magnetic field observations. This collaboration focuses on the installation of magnetometers, or magnetic variometers, at existing seismic stations. Along with improving the density of space weather observations for hazard monitoring, these data can be used to correct colocated magnetic field induced noise in seismic data. Such corrections are especially useful during time periods of large magnetic storms where the magnetic field‐induced instrument noise can be of similar amplitude to earthquake ground‐motion records.

contiguous United States↗
USGS2024

Introduction to recommended capabilities and instrumentation for volcano monitoring in the United States

Introduction The National Volcano Early Warning System (NVEWS) was authorized and partially funded by the U.S. Government in 2019. In response, the U.S. Geological Survey (USGS) Volcano Hazards Program asked its scientists to reflect on and summarize their views of best practices for volcano monitoring. The goal was to review and update the recommendations of a previous report (Moran and others, 2008) and to provide a more detailed analysis of capabilities and instrumentation for monitoring networks for U.S. volcanoes. This Scientific Investigations Report and its chapters reflect those USGS scientists’ views and summaries and will serve as a guide for future network upgrades funded through NVEWS. Given the well-documented hazards posed by volcanoes to population centers and aviation (for example, Blong, 1984; Scott, 1989; Neal and others, 1997, 2019; Guffanti and others, 2010; Shroder and Papale, 2014; Prata and Rose, 2015; Palmer, 2020), volcano monitoring is critical for ensuring public safety and for mitigating the impacts of volcanic activity. Accurate and timely forecasts are facilitated by well-designed monitoring networks that are in place long enough to allow for background behavior to be recognized and understood. Because precursory signals may be limited and unrest may progress rapidly to an eruption, our goal is to deploy monitoring systems that enable detection of the reactivation of dormant volcanoes as early as possible, allowing for public safety and risk mitigation. NVEWS planning is also informed by the results of Ewert and others (2005, 2018), whereby 161 U.S. volcanoes are currently categorized and ranked commensurate with their relative threat. In each chapter, author(s) considered the need for some redundancy of instrumentation and telemetry, given the likelihood of occasional equipment failure, particularly in extreme and remote environments. Establishing digital telemetry networks requires advanced planning, sighting, radio-shot testing, and, inevitably, troubleshooting in the field. This is harder to achieve rapidly during a crisis; thus, an important goal for monitoring U.S. volcanoes is to establish digital telemetry backbones with redundancy and extra capacity to absorb additional instruments should a volcano begin to exhibit signs of unrest (fig. A1). The National Telecommunications and Information Administration (NTIA) imposed new regulations in the United States, eliminating the use of older analog radios for many purposes, which had been one previous means for redundant data delivery. However, the resulting conversion from analog to digital systems usefully enables stations to accommodate new and multivariate real-time data streams (for example, Global Navigation Satellite System [GNSS] receivers, infrasound arrays, gas spectrometers, visible and infrared cameras, and broadband seismometers). We note that other USGS and broader national and international hazard programs can leverage NVEWS instrumentation plans. Examples of this include the following: Improved seismic coverage of volcanoes will increase the capability of the USGS Earthquake Hazards Program to detect and locate earthquakes, estimate ground shaking, and provide timely early warnings through the ShakeAlert Earthquake Early Warning System (Given and others, 2018). The National Oceanic and Atmospheric Administration’s Tsunami Program will benefit from additional seismic stations, particularly within the sparsely instrumented Aleutian Islands, Northern Mariana Islands, and American Samoa. Infrasound stations can detect signals from landslides, debris flows and lahars, floods, and weather events, providing benefits to the National Weather Service and the USGS Landslide Hazards Program.

Scientific Investigations Report↗
USGS2025

Estimated average annualized tsunami losses for the United States

Tsunami hazards are substantial threats to coastal communities across the United States (U.S.) and its territories. U.S. states and territories collaborate through the National Tsunami Hazard Mitigation Program (NTHMP) to develop their own tsunami-hazard information for outreach and evacuation planning. An effort to curate this tsunami-hazard information to support comprehensive risk analysis at the national level has not yet been completed. In support of this effort, the Federal Emergency Management Agency (FEMA) collaborated with the NTHMP, the National Oceanic and Atmospheric Administration (NOAA) and the U.S. Geological Survey (USGS) starting in 2023. This collaboration included the collection and analysis of existing tsunami hazard data and methods in the U.S. Tsunami subject matter experts identified and selected scientifically defensible methods for estimating the risks to buildings and populations in coastal communities. These efforts may support decision making regarding resilience policies, priorities, strategies and funding levels. Tsunamis can be triggered by earthquakes, subaerial or submarine landslides, volcanic eruptions, glacial calving, near-earth objects, weather or other events. These events can cause severe destruction, injuries, and loss of life due to powerful currents and flooding. Tsunamis pose a substantial threat to the western United States and all U.S. territories, as described below. ■ Hawaii is threatened by distant tsunamis due to its central location in the Pacific Ocean basin and has a history of local events. ■ Alaska, particularly the Aleutian Islands, faces local tsunami threats due to proximity to the Alaska-Aleutian Subduction Zone, as well as distant tsunamis from around the Pacific Ocean basin. ■ The western coast of the U.S. is threatened by distant tsunamis from around the Pacific Ocean basin and local source tsunamis from earthquakes generated within the Cascadia Subduction Zone in the Pacific Northwest. ■ American Samoa faces local tsunami threats from earthquakes generated in the nearby Tonga Trench, as well as distant tsunami threats. ■ Guam and the Commonwealth of the Northern Mariana Islands are threatened by local tsunamis from the nearby Mariana Subduction Zone, as well as distant sources from around the Pacific Ocean Basin. ■ Puerto Rico and the United States Virgin Islands are threatened by multiple local and distant tsunami sources, such as the Puerto Rico Trench (PRT), given their location in the complex seismic region of the Caribbean Sea. Several historical events stand out because of their catastrophic impacts. ■ In the Pacific Northwest, the 1700 Cascadia earthquake caused a tsunami that affected coastal Native American communities, though the extent of the damage is not fully documented (Ludwin, et al., 2005). ■ In Puerto Rico, the 1918 earthquake triggered a tsunami that caused $77 million in damage in 2022 dollars and 116 fatalities, primarily along the western coast (Coffman et al., 1982). ■ The 1946 Aleutian Islands earthquake triggered a massive tsunami that devastated Hilo, Hawaii, killing 158 people and resulting in approximately $375 million in damage (adjusted to 2022 dollars) (Fisher et al., 2023). ■ The 1964 Alaska earthquake (M 9.2) generated tsunamis that caused severe destruction in some communities across Alaska, Oregon, and California. This disaster led to a total of 124 fatalities and approximately $2.9 billion in property damage (adjusted to 2022 dollars) (Brocher et al., 2014) (Alaska Science Center, 2024). ■ In American Samoa, a tsunami generated by the 2009 Samoa earthquake (Mw 8.1) caused widespread devastation, resulting in 34 confirmed fatalities (Apatu et al., 2013) and economic losses exceeding $160 million (adjusted to 2022 dollars) (DHS, 2011). More recent events, including the 2010 Chile earthquake, the 2011 Japan earthquake, and the 2022 Tonga volcanic eruption, resulted in millions of dollars in damage to numerous ports and harbors in the U.S. South Pacific territories, Hawaii, and along the west coast of the U.S. (Lynett, et al., 2022) (Wilson, et al., 2013). Since these events, the expansion of the built environment in lowlying areas along the coast has increased the exposure of buildings and people, thereby further escalating community risk from tsunamis. This report provides a comprehensive national assessment of earthquake-generated tsunami risk. It does not include impacts from tsunamis generated by landslides, volcanic eruptions, glacial calving, near-earth objects, weather, or other events. This study is based on the best available hazard data from the U.S. Pacific Coast (California, Oregon and Washington), Alaska, Hawaii, U.S. Pacific Territories (American Samoa, Guam and Commonwealth of the Northern Mariana Islands) and Caribbean Territories (Puerto Rico and United States Virgin Islands). Tsunami risks associated with states along the East Coast, Gulf Coast, and Great Lakes are not included in this study because Hazus 6.1 software (FEMA 2024a) does not currently include the ability to analyze tsunami risk in those states. Once modeling capabilities and tsunami hazard data become available for additional states, FEMA may incorporate these data into future editions of this study.

Alaska, California, Hawaii Oregon, Washington↗
USGS2025

Rainfall thresholds for postfire debris-flow initiation vary with short-duration rainfall climatology

The size, frequency, and geographic scope of severe wildfires are expanding across the globe, including in the Western United States. Recently burned steeplands have an increased likelihood of debris flows, which pose hazards to downstream communities. The conditions for postfire debris-flow initiation are commonly expressed as rainfall intensity-duration thresholds, which can be estimated given sufficient observational history. However, the spread of wildfire across diverse climates poses a challenge for accurate threshold prediction in areas with limited observations. Studies of mass-movement processes in unburned areas indicate that thresholds vary with local climate, such that higher rainfall rates are required for initiation in climates characterized by frequent intense rainfall. Here, we use three independent methods to test whether initiation of postfire runoff-generated debris flows across the Western United States varies similarly with climate. Through the compilation of observed thresholds at various fires, analysis of the spatial density of observed debris flows, and quantification of feature importance at different spatial scales, we show that postfire debris-flow initiation thresholds vary systematically with short-duration rainfall-intensity climatology. The predictive power of climatological data sets that are readily available before a fire occurs offers a much-needed tool for hazard management in regions that are facing increased wildfire activity, have sparse observational history, and/or have limited resources for field-based hazard assessment. Furthermore, if the observed variation in thresholds reflects long-term adjustment of the landscape to local climate, rapid shifts in rainfall intensity related to climate change will likely induce spatially variable shifts in postfire debris-flow likelihood.

Arizona, California, Colorado, Nevada, New Mexico,↗
USGS2026

Earthquake ground-motion model adjustments for the San Francisco Bay area

We develop adjustments to ergodic ground‐motion models (GMMs) to improve their performance in the San Francisco Bay Area (SFBA). GMMs are widely used in hazard assessments to estimate characteristics of ground shaking based on known properties of the source, path, and site. Such models are often developed using datasets containing records from various regions, resulting in models that represent median ground‐motion behavior, which may not adequately represent ground motions within subregions. This is true for the SFBA, where ground motions attenuate more rapidly with distance than in many other parts of California that dominate GMM databases. To support improved seismic hazard estimates in the SFBA, we calculate regional constants and anelastic attenuation coefficient adjustments relative to two commonly used ergodic GMMs: BSSA14 ( Boore et al. , 2014 ) and ASK14 ( Abrahamson et al. , 2014 ). These adjustments are obtained for a suite of ground‐motion intensity measures (peak ground acceleration, peak ground velocity, and 5%‐damped pseudospectral acceleration at oscillator periods ranging from 0.075 to 10 s) using mixed‐effects regression. Use of the regionally adjusted models reduces the overall bias by up to 0.5 natural log units for BSSA14 and up to 0.6 natural log units for ASK14. We demonstrate one application of our attenuation adjustments and their implications in an earthquake early warning case study of the 2014 M 6.0 South Napa earthquake. The predicted extent of shaking using the adjusted models better matches observed shaking at large source‐to‐site distances, especially for lower shaking intensities, thus potentially reducing overalerting. We encourage the use of our model adjustments when ergodic models are considered for seismic hazard studies in the SFBA.

California↗
USGS2025

Do bighorn sheep use desert tortoise burrow spoil piles as mineral licks in southern California?

In a previous study, bighorn sheep ( Ovis canadensis ) were periodically photographed by trail cameras when they visited desert tortoise ( Gopherus agassizii ) burrows in the San Bernardino Mountains near Palm Springs, California, USA. The authors suggested that bighorn sheep may utilize the excavated spoil material from burrows as a mineral lick. To test that supposition, we collected soil samples from the spoil piles and undisturbed surface soil up to 1 m away at two desert tortoise study sites with bighorn sheep at the aforementioned site and another nearby site. We hypothesized that sodium concentrations would be greater in spoil than in nearby surface soil samples. Common major cations were quantified in soil samples using inductively coupled plasma-mass spectrometry following microwave-assisted digestion to solubilize the fraction of elements that could become biologically or environmentally available. Mean sodium concentrations were greater in burrow spoil samples than in undisturbed soil samples at both sites, likely due to aqueous leaching of sodium from surface to subsurface soil horizons. Although we did not collect evidence of geophagy by bighorn sheep, the behavior is well known. However, trail camera photographs of bighorn sheep with their head next to the entrance of tortoise burrows suggests that they may periodically utilize sodium and other elements brought to the surface by desert tortoises that are otherwise unavailable to bighorn sheep on the surface.

California↗
USGS2025

The abandoned mine inventory of the United States—A brief summary

The Infrastructure Investment and Jobs Act of 2021 required the Secretary of the Interior to establish a program to inventory abandoned hard-rock mines in the United States. The Department of the Interior’s Office of Environmental Policy and Compliance asked the U.S. Geological Survey’s Mineral Deposit Database project (USMIN) to use existing data sources to build an inventory of all individual abandoned mine features in the United States. In addition to feature locations, this new database documents the surface land management agency, associated physical and environmental hazards, and any completed mitigation efforts. This information will improve risk assessment and support land management efforts, including hazard mitigation, ecosystem restoration planning, and reclamation. This fact sheet provides a brief overview of USMIN’s collaborative efforts with Federal, State, and Tribal agencies to build a comprehensive and authoritative national inventory of abandoned mine features.

Fact Sheet↗