Geology ReportsSearch

SEARCH · Geology Reports

Results for “Nature Communications”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

414 records · Page 13Linked to original sources

Slow slip detectability in seafloor pressure records offshore Alaska

In subduction zones worldwide, seafloor pressure data are used to observe tectonic deformation, particularly from megathrust earthquakes and slow slip events (SSEs). However, such measurements are also sensitive to oceanographic circulation-generated pressures over a range of frequencies that conflate with tectonic signals of interest. Using seafloor pressure and temperature data from the Alaska Amphibious Community Seismic Experiment, and sea surface height data from satellite altimetry, we evaluate the efficacy of various seasonal and oceanographic pressure signal proxy corrections and conduct synthetic tests to determine their impact on the timing and amplitude prediction of ramp-like signals typical of SSEs. We find that subtracting out the first mode of the complex empirical orthogonal functions of the pressure records on either the shelf or slope yields signal root-mean-square error (RMS) reductions up to 73% or 80%, respectively. Additional correction with proxies that exploit the depth-dependent spatial coherence of pressure records provides cumulative variance reductions up to 83% and 93%, respectively. Our detectability tests show that the timing and amplitude of synthetic SSE-like ramps can be well constrained for ramp amplitudes ≥4 cm on the shelf and ≥2 cm on the slope, using a fully automated detector. The principal limits on detectability are residual abrupt changes in pressure that occur as part of the transition to and from summer to winter conditions but are not adequately characterized by our seasonal corrections, as well as the inability to properly account for instrumental drift, which is not readily separated from the seasonal signal.

Alaska

Deaf, deafblind, and hard of hearing university student experiences with earthquake early warning in the United States: Evaluating language planning and technology access

The growing literature on deaf and hard of hearing (DHH+) populations and disasters demonstrates that emergency communication (including alerts) is not reaching global DHH + individuals with dangerous impacts for morbidity and mortality. This is the first research study in the U.S. to qualitatively explore the experiences of DHH + persons with earthquake early warning (EEW) through group-based dialogue sessions. The study investigates eight DHH + university students'past earthquake experiences, access to EEW alerts, and perceptions of ShakeAlert Ⓡ , an EEW system for detecting earthquakes and alerting residents of California, Oregon, and Washington. Findings highlight key gaps in disaster alert usability within four thematic areas: lack of messaging in participants' language(s), unclear alert messaging, deficient message delivery mechanisms for deafblind persons, and insufficient access to earthquake information and training that leads to dependence on informal information networks. Weaknesses identified in these four themes reduce DHH + trust in EEW systems and compromise the capacity of alert recipients to take swift protective action or to mentally prepare before shaking starts. The study also underscores structural factors such as insufficient linguistic representation in disaster language planning and technology design, which ignores the linguistic and sensory access needs of DHH + individuals. Building on disaster language planning frameworks, we recommend involving DHH + populations to co-develop EEW alerts. By centering DHH + perspectives, this research contributes to ongoing efforts to ensure that EEW systems reach everyone.

California

U.S. Geological Survey Monitoring Milestones—Oe-151 at Woodgate, NY (433112075091501)

On July 9, 1926, monitoring well Oe-151 at Woodgate, New York (USGS ID 433112075091501) recorded its first groundwater data. Since then, the well has provided water data nearly continuously and has now reached a 100-year milestone for data collection. The well is part of the U.S. Geological Survey (USGS) Climate Response Network (CRN), which is a national network of wells selected to monitor natural groundwater conditions. Well Oe-151 is the first well in the network to reach a 100-year Centennial milestone.

New York

Factors influencing distribution of Coccidioides immitis in soil, Washington State, 2016

Coccidioides immitis and Coccidioides posadasii are causative agents of Valley fever, a serious fungal disease endemic to regions with hot, arid climate in the United States, Mexico, and Central and South America. The environmental niche of Coccidioide s spp. is not well defined, and it remains unknown whether these fungi are primarily associated with rodents or grow as saprotrophs in soil. To better understand the environmental reservoir of these pathogens, we used a systematic soil sampling approach, quantitative PCR (qPCR), culture, whole-genome sequencing, and soil chemical analysis to identify factors associated with the presence of C. immitis at a known colonization site in Washington State linked to a human case in 2010. We found that the same strain colonized an area of over 46,000 m 2 and persisted in soil for over 6 years. No association with rodent burrows was observed, as C. immitis DNA was as likely to be detected inside rodent holes as it was in the surrounding soil. In addition, the presence of C. immitis DNA in soil was correlated with elevated levels of boron, calcium, magnesium, sodium, and silicon in soil leachates. We also observed differences in the microbial communities between C. immitis -positive and -negative soils. Our artificial soil inoculation experiments demonstrated that C. immitis can use soil as a sole source of nutrients. Taken together, these results suggest that soil parameters need to be considered when modeling the distribution of this fungus in the environment.

Washington

Insights on gas hydrate formation and growth within an interbedded sand reservoir from well logging at the Qiongdongnan Basin, South China Sea

Although variable well log resolution and its control on saturation estimation has been studied, it has not been directly applied to a specific location to explore the nature of gas hydrate within a sand reservoir. We applied in-situ measurements of resistivities, neutron porosity, and gamma ray at two sites in the Qiongdongnan Basin, South China Sea (QDN-W05–2021 and QDN-W08–2021) to investigate the reservoir parameters of a hydrate-bearing sand reservoir. Our results show that gas hydrate is distributed in 5 zones with a total thickness of 10.7 m and an average saturation of 69% at the QDN-W05–2021 site, while they are distributed in 2 zones with a total thickness of 4.3 m and an average saturation of 49% at the QDN-W08–2021 site. We found that variances in saturations estimated from lateral-extra deep button (RX), phase shift (P40H-P40L), and attenuation (A40H-A40L) resistivities within the laterally mapped continuous sand body were affected by the nature of gas hydrate occurrences. Results indicate gas hydrate forms and accumulates at the center of the sand layer and tends to be less or not present toward the top and base. Integrated with seismic data, the in-situ measurements provide insights in the evolution of a mushroom-shaped, hydrate-gas reservoir system. In the system, free gas is likely horizontally transported from the top-center of the gas chimney to the surrounding areas in the early stage dominated by a warm-gas environment, whereas hydrate forms in the opposite pathway starting from the surrounding areas in the following stage with temperature reducing. Our study suggests that high-resolution in-situ measurements not only are a tool to identify the physical properties, but also can be used to help explain the physical process of hydrate growth and accumulation.

Marine Geology

Microclimate mediates the strength and direction of avian biotic interactions

Theory predicts that that the strength and direction of species interactions can shift from being competitive in benign environments toward being facilitative in stressful environments. However, the environmental context dependency of species interactions has rarely been tested in animal communities. We capitalized on a 15-year, landscape-scale dataset, collected annually in a relatively stable old-growth forest environment to test the long-held hypothesis that the strength and direction of species interactions might be mediated by climatic conditions. It is generally accepted that competitive and facilitative interactions drive the distributions of many species. Using multi-species dynamic occupancy models applied to long-term data, we tested whether annual settlement by bird species could affect either the persistence or settlement by other phylogenetically related species, and whether these interactions are mediated by microclimate. We found that species interactions were influenced by microclimate for some, but not all avian species pairs. Related species pairs more often showed settlement dynamics that were indicative of attraction rather than repulsion. In some cases, competitive interactions at warmer microclimates flipped to become facilitative in colder ones. However, the reverse was also true: facilitative interactions amplified for some species under warm conditions. Furthermore, species pairs that were closely related were more likely to exhibit competitive relationships along at least part of the microclimatic gradient. Our results highlight the importance of using long-term data to incorporate competitive and facilitative interactions into species distribution models and support the notion that the strength and direction of species interactions can be dependent on microclimatic environmental conditions.

Oregon

Sediment thickness map of United States Atlantic and Gulf Coastal Plain Strata, and their influence on earthquake ground motions

With the recent successful accounting of basin depth ground-motion adjustments in seismic hazard analyses for select areas of the western United States, we move toward implementing similar adjustments in the Atlantic and Gulf Coastal Plains by constructing a sediment thickness model and evaluating multiple relevant site amplification models for central and eastern United States seismic hazard analyses. We digitize and combine existing sediment thickness data sets into a composite surface that delineates the base of Cretaceous sediments under the Atlantic Coastal Plain and the base of Mesozoic sediments under the Gulf Coastal Plain. Amplification models dependent on sediment thickness, site natural period, and source-to-site path length are compared with data sets of observed ground motions to evaluate the ability of the new models to improve ground motion estimates. We find that the amplification models can account for observed trends in sediment-thickness and period-dependent residuals, but some tuning is required. For example, the model of Chapman and Guo requires a reference V S 30 , the time-averaged shear-wave velocity within 30 m of the Earth’s surface, for non-Coastal Plain sites, which we estimate to be between about 1 and 2 km/s. Along with our sediment thickness model, we estimate a velocity profile for application to the Harmon et al. site-natural-period-based model in order to best match the Chapman and Guo period dependence for a broad range of sediment thicknesses. The Next Generation of Attenuation models for the eastern United States Gulf Coast path-based adjustment models can also account for seismic attenuation in the Coastal Plain sediments and reduce the standard deviation of total residuals. If enacted in the U.S. Geological Survey National Seismic Hazard Model, these amplification models will reduce predicted short-period (<1 s) and increase predicted long-period (>1 s) ground motions in the Coastal Plains appreciably.

Earthquake Spectra

Site response in the Walnut Creek–Concord region of the San Francisco Bay, California: Ground motion amplification in a fault-bounded basin

Thirty‐seven portable accelerometers were deployed in the eastern San Francisco Bay communities of Walnut Creek and Concord to study site response in a fault‐bounded, urban, sedimentary basin. Local earthquakes were recorded for a period of two years from 2017 to 2019 resulting in 101 well‐recorded events. Site response is estimated by two methods: the reference site spectral ratio method and a source‐site spectral inversion method. The reference site spectral ratio method allows investigation of the variability of site amplification with source azimuth and frequency. The source‐site spectral inversion method yields the best least‐squares fit to site response for a database of ground‐motion records. Both methods show substantial amplification in the Walnut Creek–Concord basin below 2 Hz indicating strong surface‐wave development. Greater amplification is seen for sources aligned along the long axis of the basin. Inversion using close‐in sources at short distances yields lower amplification at longer periods than the entire data set due to reduced surface‐wave generation for steeper angles of incidence. Inversion of site response spectra for shallow shear‐wave velocity using a global search algorithm yields V S30 values consistent with generalized mapping results based on geology and topography but with greater variability due to local site variations. 3D finite‐element modeling shows greater amplification in the Walnut Creek–Concord basin with a basin‐edge effect likely contributing to higher ground motions. Topography is also seen to lead to increased scattering and shadowing effects.

California

Surface variable‐based machine learning for scalable arsenic prediction in undersampled areas

In the United States, private wells are not federally regulated, and many households do not test for Arsenic (As). Chronic exposure is linked with multiple health outcomes, and risk can change sharply over short distances and with well depth. Coarse maps or sparse sampling often miss exceedances. Most existing models operate at ∼1 km resolution and use groundwater chemistry or detailed geologic logs, which limits their use in undersampled areas where improved guidance is most needed. We overcome these limitations by developing a machine learning model for Minnesota, USA, that predicts As exposure risk using only surficial variables from remote sensing and global data sets. Variables related to surface water hydrology and geomorphology are selected based on mechanistic links that control redox conditions and As mobilization. Local training was essential, and surficial geology variables that are more sensitive to local conditions were needed to maximize model accuracy. The resulting complete model was sufficiently sensitive to generate accurate and detailed risk maps and depth profiles of As concentrations above the 10 μg/L maximum contaminant level. Accuracy depended on local training data density. We identified a training data density of 0.07 wells/km 2 as a practical target for stable county-level performance. Maps of exceedance probabilities highlight priority areas for testing that are particularly important in rural communities that have received less sampling. These results support public health action by guiding where to install wells and where to test them, how much new sampling is needed, and where treatment outreach is most urgent.

Minnesota

Beyond the wedge: Impact of tidal streams on salinization of groundwater in a coastal aquifer stressed by pumping and sea-level rise

Saltwater intrusion (SWI) is a well-studied phenomenon that threatens the freshwater supplies of coastal communities around the world. The development and advancement of numerical models has led to improved assessment of the risk of salinization. However, these studies often fail to include the impact of surface waters as potential sources of aquifer salinity and how they may impact SWI. Based on field-collected data, we developed a regional, variable-density groundwater model using SEAWAT for east Dover, Delaware. In this location, major users of groundwater from the surficial aquifer are the City of Dover and irrigation for agriculture. Our model includes salinized marshland and tidal streams, along with irrigation and municipal pumping wells. Model scenarios were run for 100 years and included changes in pumping rates and sea-level rise (SLR). We examined how these drivers of SWI affect the extent and location of salinization in the surficial aquifer by evaluating differences in chloride concentration near surface waters and the subsurface freshwater-saltwater interface. We found the presence of the marsh inverts the typical freshwater-saltwater wedge interface and that the edge of the interface did not migrate farther inland. Additionally, we found that tidal streams are the dominant pathways of SWI at our site with salinization from streams being exacerbated by SLR. Our results also show that spatial distribution of pumping affects both the magnitude and extent of salinization, with an increase in concentrated pumping leading to more intensive salinization than a more widely distributed increase of the same total pumping volume.

Delaware

U.S. Geological Survey Karst Interest Group proceedings, Nashville, Tennessee, October 22-24, 2024

Karst hydrogeologic systems represent challenging and unique conditions to scientists studying groundwater flow and contaminant transport. Karst terrains are characterized by distinct and beautiful landscapes, caverns, and springs, and many of the exceptional karst areas are designated as national or state parks. The range and complexity of landforms and groundwater flow systems associated with karst terrains are enormous, perhaps more than any other aquifer type. The U.S. Geological Survey (USGS) Karst Interest Group (KIG), formed in 2000, is a loosely knit, grassroots organization of USGS and non-USGS scientists and researchers devoted to fostering better communication among scientists working on, or interested in, karst aquifers. The primary mission of the KIG is to encourage and support interdisciplinary collaboration and technology transfer among scientists working in karst areas. To accomplish its mission, the KIG has organized a series of workshops. To date (2024), nine KIG workshops, including the workshop documented in this report, have been held. The abstracts and extended abstracts provide a snapshot in time of past and current karst related studies. The USGS Water Availability and Use Science Program funded the workshop and proceedings. The planning committee for the ninth workshop includes Thomas D. Byl (USGS and Tennessee State University), Allan K. Clark (USGS), Laura M. DeMott (USGS), Eve L. Kuniansky (USGS, Emeritus), Benjamin V. Miller (USGS), and Lawrence E. Spangler (USGS, Emeritus). The workshop proceedings are edited by Eve L. Kuniansky and Lawrence E. Spangler. The field trip guide was produced by Benjamin V. Miller and Brian Ham (Tennessee Department of Environment and Conservation) and included in the proceedings from the KIG’s 2021 virtual workshop to be used on the optional field trip held on Thursday, October 24, 2024.

Open-File Report

Rainfall thresholds for postfire debris-flow initiation vary with short-duration rainfall climatology

The size, frequency, and geographic scope of severe wildfires are expanding across the globe, including in the Western United States. Recently burned steeplands have an increased likelihood of debris flows, which pose hazards to downstream communities. The conditions for postfire debris-flow initiation are commonly expressed as rainfall intensity-duration thresholds, which can be estimated given sufficient observational history. However, the spread of wildfire across diverse climates poses a challenge for accurate threshold prediction in areas with limited observations. Studies of mass-movement processes in unburned areas indicate that thresholds vary with local climate, such that higher rainfall rates are required for initiation in climates characterized by frequent intense rainfall. Here, we use three independent methods to test whether initiation of postfire runoff-generated debris flows across the Western United States varies similarly with climate. Through the compilation of observed thresholds at various fires, analysis of the spatial density of observed debris flows, and quantification of feature importance at different spatial scales, we show that postfire debris-flow initiation thresholds vary systematically with short-duration rainfall-intensity climatology. The predictive power of climatological data sets that are readily available before a fire occurs offers a much-needed tool for hazard management in regions that are facing increased wildfire activity, have sparse observational history, and/or have limited resources for field-based hazard assessment. Furthermore, if the observed variation in thresholds reflects long-term adjustment of the landscape to local climate, rapid shifts in rainfall intensity related to climate change will likely induce spatially variable shifts in postfire debris-flow likelihood.

Arizona, California, Colorado, Nevada, New Mexico,

Groundwater quality near the Placerita Oil Field, California, 2018

Groundwater-quality data and potential fluid-migration pathways near the Placerita Oil Field in Los Angeles County, California, were examined by the U.S. Geological Survey to determine if oil-field fluids (water and gas from oil-producing and non-producing zones) have mixed with groundwater resources. Six of the 13 new groundwater samples collected for this study contained petroleum hydrocarbons, thermogenic gas, inorganic chemical signatures, and (or) isotopic values consistent with potential mixing with fluids from hydrocarbon-bearing formations. For historical groundwater samples, benzene was the most detected petroleum hydrocarbon. The historical groundwater samples with a benzene concentration greater than 0.5 micrograms per liter were from environmental monitoring wells at industrial or commercial facilities unrelated to oil and gas development that, in many cases, have identified soil or groundwater contamination and were not typically analyzed for other constituents that could provide additional lines of evidence for potential mixing with oil-field fluids. Methane was not detected in any of the 12 historical samples with a reported measurement. Reviewing historical data revealed factors that could potentially adversely affect groundwater quality in the study area. These factors include modified hydraulic gradients caused by large volumes of water extracted from the main production area and reinjected downgradient into nonproducing zones, well-barrier failures in wells constructed in the northern part of the oil field before the 1970s, well-barrier failures in produced-water disposal wells downgradient from the main production area, and naturally occurring hydrocarbons at shallow intervals. The groundwater samples most geochemically similar to samples from hydrocarbon-bearing formations were in areas where hydrocarbons are naturally occurring at shallow intervals and where oil development is at shallow depths. Additional data for hydraulic heads, water quality, and formation temperatures at multiple depths in areas with large injection volumes and well-integrity issues are needed to evaluate whether those factors have contributed to mixing between fluids from oil-producing or injection formations and groundwater resources.

California

Bottom-up characterization of geologic methane emissions in the San Juan Basin in the southwestern USA

Methane is a potent greenhouse gas that plays an important role in atmospheric chemistry and global warming. The current global methane budget has large uncertainties, and a better understanding of the budget would help to guide strategies for reducing anthropogenic emissions to fight climate change. Natural geologic methane emissions are a particularly poorly constrained source, with top-down estimates from 14 C in ice cores suggesting much lower geologic emissions than bottom-up scaling of direct flux measurements. Our study aims to contribute to resolving this discrepancy through improved bottom-up characterization of geologic methane seepage in the San Juan Basin in southwestern Colorado and northwestern New Mexico, USA. We performed 983 new flux chamber measurements in this basin during summer 2022 and winter 2023 field campaigns. Our results, in combination with prior measurements, suggest that natural seepage in the San Juan Basin only occurs on or near the Fruitland coal outcrop. Specifically, our new measurements confirm previous measurements of seepage along the northwestern exposure of the Fruitland outcrop in Colorado (a known hydrodynamic overpressure region) and for the first time, identified seepage locations along the southernmost Fruitland outcrop exposure in New Mexico, in association with a coal cleat and a fault. Overall, seepage along the Fruitland coal outcrop is heterogeneously distributed, with both positive and negative (interpreted as microbial soil sink) methane fluxes. Features that are hypothesized to be predictive of seepage (e.g., faults) were not associated with positive methane fluxes in areas outside of the Fruitland outcrop. Our best estimate for total geologic methane seepage in the San Juan Basin from spatial interpolation and statistical upscaling is approximately 0.14 Tg CH 4 /yr, with a range from 0.029 to 0.48 Tg CH 4 /yr. This best-estimate value is lower than a previous bottom-up estimate from a gridded seepage inventory, but higher than a previous top-down estimate.

Colorado, New Mexico

Critical minerals in zinc ore—An update on Earth Mapping Resources Initiative Research in the Boulder Batholith region, Montana

Plain Language Summary U.S. Geological Survey research, in collaboration with Montana Technical University and Montana Bureau of Geology and Mines, is providing key critical mineral information that may have potential for critical mineral production of several mining districts in the Boulder Batholith region, to better understand the abundance and distribution of natural resources within this region. Continued research can be used to show the potential for previously undiscovered critical mineral resources in southwestern Montana and in other parts of the United States.

Montana

Geohydrology of the Cross-Florida Barge Canal area, with special reference to the Ocala vicinity

The Cross-Florida Barge Canal route commences at Palatka on the St. Johns River, about 75 miles upstream from the Atlantic Ocean, and extends 110 miles southwestward across Peninsular Florida into deep water in the Gulf of Mexico near Yankeetown. The canal will be equipped with five locks, each 600 feet long and 84 feet wide, and the channel will be a minimum of 12 feet deep and 150 feet wide. From near Ocala northeastward, the canal channel will replace much of the natural channel of the Oklawaha River, and will be excavated into beds of the so-called shallow sand aquifer of Miocene age and younger, which overlies limestone of the Floridan aquifer. Westward from Ocala, most of the canal will be excavated below the potentiometric surface into limestone and dolomite of the Floridan aquifer. Water levels of Rodman, Eureka, and Inglis Pools will be controlled by dams and spillways with the limited exchange of water between the pools and the aquifers. The water levels in the Summit Pools will fluctuate with the natural changes in the ground-water level of the Floridan aquifer, although the stage of the pool will be controlled partly by the stage held in the Eureka Pool. A dynamic inflow-outflow relationship will exist between the Summit Pool and the Floridan aquifer. The Floridan aquifer in the canal area is 1,000 to 1,200 feet thick and consists of limestone and dolomite of middle Eocene Miocene age, including from older to younger, the Lake City, Avon Park, and Ocala limestones plus permeable sandy, dolomitic limestone in the lower part of the Hawthorn Formation. It is possible that most of the flow to the two major springs in the area occurs in the upper 100 feet or so of the aquifer in the Ocala Limestone. The aquifer is underlain by the Oldsmar limestone of early Eocene age and is overlain by sand, clayey sand, clay and shell beds of Miocene through Holocene age, in thickness from a few feet to 300 feet. The permeable beds overlying the Floridan aquifer constitute the shallow aquifer, while the poorly permeable ones act as confining beds where the Floridan aquifer is under artesian conditions. A north-south line drawn separating the head of Silver Springs on the west from the Oklawaha River on the east marks the approximate western limit of a continuous blanket of materials of Miocene-Pliocene(?) age covering the rocks of the Floridan aquifer. East of the line, much of the aquifer is under artesian conditions, particularly in the Oklawaha River valley, although in some areas east of the valley, direct recharge through thick permeable Miocene-Pliocene(?) sands occurs. West of the line, only scattered remnants of a once continuous Miocene-Pliocene(?) cover remain. Lack of the cover is a result of erosion on the crest and flank of the Ocala Uplift, a broad northwest-southeast trending anticlinal upwarp, the axis of which is crossed by the canal route in the Dunnellon area. Over most of this area the Floridan aquifer is unconfined and receives direct recharge through a cover of a few tens of feet of sand and clayey sand of Quaternary age. Tensional stresses during the structural evolution of the Ocala Uplift produced an intersecting system of fractures and normal faults in rocks of the Floridan aquifer. The fractures and faults are important controls for orientation of solution channels and, therefore, for development of ground-water circulation patterns. When the system surface streams, which once drained the Barge Canal area, eroded the poorly permeable Miocene-Pliocene(?) cover from the flanks of the Ocala Uplift, surface runoff was reduced and precipitation began to directly infiltrate the underlying limestones. Now only principal streams remain, such as the Oklawaha and Withlacoochee Rivers and a few short tributaries, while one of the most highly developed subsurface drainage systems in the world has evolved in cavernous limestone of the Floridan aquifer. Two of the larger freshwater springs in the world now discharge from the Floridan aquifer in the canal area. Silver Springs near Ocala discharges an average 531 mgd (million gallons per day) down the 4-mile long Silver River, which flows on poorly permeable beds to the Oklawaha River. Rainbow Springs near Dunnellon discharges on average 468 mgd from numerous orifices in the bed of the 5-mile-long Rainbow River, which flows into the Withlacoochee River. The heads of the springs have migrated to their present positions partly because of a tendency of ground-water levels to decline as permeability in the aquifer is increased due to removal of limestone by solution, and because of mechanical erosion of the limestone in the vicinity of the spring heads. Also, points of principal spring discharges have shifted in the past due to changes in ground-water levels in response to changes in sea level. The subsurface drainage system is continuing to evolve today, as evidenced in part by frequent occurrence of new sinkholes and by the presence of significant amounts of calcium bicarbonate in the spring waters. Rodman Pool, at the east end of the canal, is separated from the Floridan aquifer by poorly permeable materials. The pool's operating water level will be only a few feet above the potentiometric surface at the downstream end, and at or slightly below the potentiometric surface at the upstream end. Little exchange of water between the Rodman Pool and the Floridan aquifer is expected. Eureka Pool, just upstream from Rodman Pool, will also be separated from the Floridan aquifer by poorly permeable beds. However, the stage of the pool will be about 15 feet higher than the natural potentiometric surface at the pool's downstream end, and some seepage into the Floridan aquifer is anticipated through faults and leaky parts of the poorly permeable beds, with a consequent rise in ground-water levels in areas adjacent to the lower end of the pool. Possibilities for particulate contamination of the aquifer will tend to be minimized because of the filtering capacity of the materials through which water must pass to reach the aquifer, although the natural filter will not preclude movement into the aquifer of contaminants which might become dissolved in the pool waters. No significant interchange of water between the pool and the aquifer is expected at the upstream end of the Eureka Pool. Present construction plans indicate an operating stage for Eureka Pool which will range between 38 and 40 feet above mean sea level, although it is possible to dredge the pool deep enough to permit a range in stage of 36 to 40 feet. A backwater effect extending up Silver River from the Eureka Pool is expected to regulate the stage at the head of Silver Springs between 39 and 44 feet above mean sea level if the pool ranges between 36 and 40 feet. If Eureka Pool ranges only between 38 and 40 feet, the range of stage at the head of the springs should be about 41 to 44 feet above mean sea level. From Inglis Lock west, the canal will have direct connection with the Gulf, and canal stage will fluctuate with the Gulf tide. Since the canal stage will be slightly lower than the adjacent ground-water levels along much of the reach, there will be some ground-water inflow to the canal. No significant changes in the existing ground-water regime are expected in the vicinity of Inglis Pool, the first step up in the canal east of the Gulf. Existing ground-water and surface-water levels in the area will not change appreciable, and the natural stage and flow of Rainbow Springs, which will flow by way of Rainbow River into Inglis Pool, should not be affected by canal operations. A possible adverse effect of the canal on the Inglis Pool area could result if sea water is locked up from the Gulf through Inglis Lock. However, the high step of 25 feet at the lock, flushing action of continuous flow from Inglis Pool to the lower reaches of the Withlacoochee River, and use of possible preventive locking procedures should minimize the problem. The potential for adverse effects on the ground-water regime is greatest in the area of the Summit Pool. Through most of the length of the pool, the canal channel will be excavated into limestone of the Floridan aquifer to depths of 12 to 27 feet below the potentiometric surface. Changes that will take place in the ground-water flow system in the Silver Springs drainage area, once the canal is completed, were estimated by flow-net analysis. Variation in aquifer transmissivity was determined by calculating transmissivity in 25 different flow cells surrounding Silver Springs. Transmissivity in the 25 cells averages about 15,600,000 gpd/ft [2,090,000 ft2/day (feet squared)], but transmissivity in the six cells through which the Summit Pool passes ranges from 9,000,000 to 44,000,000 gpd/ft (1,210,000 to 5,900,000 ft2/day). Transmissivity was used to compute static stage of the Summit Pool under given ground-water level conditions. Had the canal existed in May 1968 and had the stage of Eureka Pool been held at 36 feet at the time, the static stage in Summit Pool would have been about 42.1 feet above mean sea level. Thus, a conceptual model of the changes in the potentiometric surface wrought by the finished canal was drawn, and zones of ground-water inflow and outflow were delineated. Most outflow from the Summit Pool to the aquifer should be limited to one 4-mile-long zone along the north side of the pool, about 5 miles south of Silver Springs. It is estimated that a water volume equivalent to about 8 percent of the daily flow of Silver Springs will enter the Summit Pool each day from the southern one-third of the Silver Springs drainage area. A like amount will reenter the aquifer at the main zone of outflow and move toward Silver Springs at an estimated average velocity of about 200 feet per day, if something close to the natural static stage of the pool is maintained by return pumpage of the lockage losses. At a velocity of 200 feet per day, water from the Summit Pool would discharge at Silver Springs about 140 days later. However, any estimate of velocity in the highly cavernous limestone aquifer in the area should be used with caution, because difficult to measure changes in porosity and thickness of major zones of flow may cause large variations in velocity. If all lockage losses are returned to the Summit Pool by pumping from Eureka Pool, no net loss from the Silver Springs drainage area, except for some evaporation from the water surface in the canal and possible leakage around locks, will result from canal operations. The zone of outflow from the Summit Pool to the aquifer will be in a natural potentiometric trough, and the zone of inflow will be in a potentiometric ridge area. The equilibrium water level in the pool will tend to be about 1 foot higher than the altitude of the lowest level in the pre-canal potentiometric trough, and about 2 feet lower than the highest level on the pre-canal potentiometric ridge. West of the Silver Springs drainage area just east of Dunnellon Lock, in the area of a local potentiometric high, the water level in the Summit Pool is expected to be about 15 feet below the natural potentiometric surface. In most areas 2 to 3 miles away from the Summit Pool, effects of the canal on the natural potentiometric surface should be slight. The stage of the Summit Pool, judging from the 36-year record for ground-water level changes and the anticipated indirect effect of the controlled stage in Eureka Pool, should have a maximum of about 10.5 feet with a maximum water level of about 51.5 feet above mean sea level and a minimum of about 41.0 feet above mean sea level. Of particular importance in the Summit Pool is an implementation of well planned construction and operational procedures designed to minimize risks of ground-water contamination.

Florida

Earthquake-triggered ground-failure inventory associated with the M7.1 2018 Southcentral Alaska earthquake

The 30 November 2018, magnitude (Mw) 7.1 earthquake in Southcentral Alaska triggered substantial landslides, liquefaction, and ground cracking throughout the region, resulting in widespread geotechnical damage to buildings and infrastructure. Despite a challenging reconnaissance and remote-sensing environment, we constructed a detailed digital inventory of ground failure associated with the event from several sources. Sources included information derived from remotely sensed data, and data compiled from literature, social media postings, and earthquake damage information compiled by local, state, and federal agencies. Each instance of ground failure within the inventory contains information on the location and type of observed ground failure, and the methods and data used to document the occurrence. Where high-quality data, such as LIDAR or satellite imagery, were available and showed the ground-failure instance clearly, the extent is mapped as a polygon or polyline. All other locations are mapped as points. There are a total of 886 ground-failure instances documented within the inventory (400 landslides, 286 liquefaction features, and 200 features unattributed to specific processes). A semi-quantitative confidence scheme is used to describe mapping certainty associated with each ground-failure feature. This inventory represents a relatively moderate ground-failure-triggering event that occurred in a subarctic environment. This data paper describes the content within the inventory, the inventory data collection procedures, and limitations of the data. Events of this type are not often documented in detail; thus, adding the inventory data to the US Geological Survey Open Repository of Earthquake-Triggered Ground-Failure Inventories further diversifies the datasets available to the scientific community to be used to better understand and model earthquake-triggered ground failure.

Alaska

Assessment of extreme subsurface hydrologic conditions captured during atmospheric river storms in the San Francisco Bay area (California, USA) with applications to shallow landslide early warning

An increase in soil pore water pressure is the typical trigger for the majority of landslides caused by rainfall. Atmospheric river storms, common to the west coast of North America during the winter season, can deliver landslide triggering rainfall resulting in severe impacts to coastal communities. Using a network of hydrologic monitoring stations situated within landslide-prone terrain in the San Francisco Bay area of California (USA), we assess the meteorologic conditions and resulting hydrologic and landslide response resulting from eight consecutive storm events that caused thousands of shallow landslides during the winter of 2022–2023. We find disparate hydrological responses and resultant degrees of observed landsliding ranging from < 1 landslide/km2 to 18 landslides/km2 at the monitoring sites that reflect the interplay and differences between rainfall delivery, subsurface hydrological characteristics, and geotechnical properties at each site. Antecedent soil moisture from both early season rainfall and the first storm in the sequence played a critical role in setting up some hillslopes for failure. Subsequent storms then generated elevated pore water pressures for several hours with associated landsliding. However, we find that the occurrence of widespread landsliding required not only sufficient pore water pressure magnitude in susceptible hillslopes, but also full and prolonged effective soil saturation throughout hillslope profiles. Landslides may still occur at lower values and durations of effective saturation but are likely to be less extensive regionally. We present these findings within the context of research directions and improvements to landslide early warning systems first suggested by researchers 40 years ago.

California