Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Chemical Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

237 records · Page 10Linked to original sources
USGS2025

Groundwater dominates snowmelt runoff and controls streamflow efficiency in the western United States

Climate change in seasonally snow-covered mountain catchments is reducing water supply and decreasing streamflow predictability. Here, we use tritium age dating to show that contrary to the common assumption that snowmelt quickly contributes to runoff, streamflow during snowmelt in western US catchments is dominated by older groundwater. The average age of streamwater during snowmelt runoff (5.7 ± 4.3 years) was intermediate to the average age of groundwater (10.4 ± 4.5 years) and recent precipitation, indicating that 58% (±34%) of snowmelt runoff was derived from groundwater. Water ages, streamflow, and groundwater storage were mediated by bedrock geology: low-permeability hard rock/shale catchments exhibited younger ages, less storage, and more efficient streamflow generation than high-permeability sandstone/clastic catchments. Our results demonstrate that snowmelt runoff is the result of multiple prior years of climate mediated by groundwater storage. Including these interactions will be crucial for predicting water resources as climate and landscape changes accelerate.

western united States↗
USGS2025

Critical minerals in mine waste

Introduction Critical minerals are commodities with vulnerable supply chains that play a vital role in supporting the United States’ economy, national defense and security, emerging technologies, and energy independence. The prosperity of our Nation depends on generating a resilient supply of domestic critical minerals; mine waste may be an untapped source of these commodities. Mine waste from centuries of legacy mining persist on the landscape and may contain critical minerals and other valuable commodities previously deemed uneconomic to recover. At modern mines, the financial viability of recovering byproduct critical minerals, which are not the primary target, may be marginal and can ultimately destine them to mine waste. Further, mine waste can be a liability for the mining company or, at legacy mines, the taxpayer because of its effect on the landscape. The U.S. Geological Survey (USGS) has several initiatives to evaluate critical mineral resources in various types of waste. This factsheet highlights studies of mine waste carried out by USGS scientists at the Geology, Energy & Minerals Science Center in collaboration with other science centers funded through the USGS Mineral Resources Program. Recovery of critical minerals from mine waste can aid in remediation efforts and increase domestic supply of vital mineral resources.

Fact Sheet↗
USGS2025

Paleomagnetic correlation of surface and subsurface basalt flows in the central and southwestern part of the Idaho National Laboratory, Idaho

The U.S. Geological Survey, in cooperation with the U.S. Department of Energy, used paleomagnetic data from 22 coreholes to construct 3 fence diagrams of subsurface basalt flows in the southern part of the Idaho National Laboratory. These diagrams provide comprehensive descriptions of the horizontal and vertical distribution of basalt flows and sediment layers beneath the surface, aiding geological studies and contributing valuable data to numerical models of groundwater flow and contaminant transport. The correlations established though these diagrams include spatial correlations between basalt flows found in multiple coreholes. Correlations were identified by matching average paleomagnetic inclinations and confirming or denying these correlations using petrology, geochemistry and radiometric ages. The fence diagrams aid in identifying potential locations of subsurface vents, volcanic vents that have been buried by more recent volcanic activity, associated to subsurface basalt flows. By tracing the subsurface flows and analyzing where the greatest thickness occurs, the locations of buried vents can be inferred. Some subsurface flows exhibit correlations across several coreholes and may indicate yet unidentified surface or buried vents, thereby enhancing our understanding of the volcanic history and subsurface geology of the region.

Idaho↗
USGS2000

Water-quality conditions and relation to drainage-basin characteristics in the Scituate Reservoir Basin, Rhode Island, 1982-95

The Scituate Reservoir Basin covers about 94 square miles in north central Rhode Island and supplies more than 60 percent of the State of Rhode Island's drinking water. The basin includes the Scituate Reservoir Basin and six smaller tributary reservoirs with a combined capacity of about 40 billion gallons. Most of the basin is forested and undeveloped. However, because of its proximity to the Providence, Rhode Island, metropolitan area, the basin is subject to increasing development pressure and there is concern that this may lead to the degradation of the water supply. Selected water-quality constituent concentrations, loads, and trends in the Scituate Reservoir Basin, Rhode Island, were investigated locate parts of the basin likely responsible for exporting disproportionately large amounts of water-quality constituents to streams, rivers, and tributary reservoirs, and to determine whether water quality in the basin has been changing with time. Water-quality data collected between 1982 and 1995 by the Providence Water Supply Board PWSB) in 34 subbasins of the Scituate Reservoir Basin were analyzed. Subbasin loads and yields of total coliform bacteria, chloride, nitrate, iron, and manganese, estimated from constituent concentrations and estimated mean daily discharge records for the 1995 water year, were used to determine which subbasins contributed disproportionately large amounts of these constituents. Measurements of pH, color, turbidity, and concentrations of total coliform bacteria, sodium, alkalinity, chloride, nitrate, orthophosphate, iron, and manganese made between 1982 and 1995 by the PWSB were evaluated for trends. To determine the potential effects of human-induced changes in drainage- basin characteristics on water quality in the basin, relations between drainage-basin characteristics and concentrations of selected water-quality constituents also were investigated. Median values for pH, turbidity, total coliform bacteria, sodium, alkalinity, chloride, nitrate, and iron were largest in subbasins with predominately residential land use. Median instantaneous loads reflected drainage-basin size. However, loads normalized by drainage area (median instantaneous yields) also were largest in residential areas where point and non-point sources are likely, and in areas of poorly drained soils. Significant trends in water-quality constituents from 1982 to 1995 in the Scituate Reservoir Basin indicate that the quality of the water resources in the basin may be slowly changing. Scituate Reservoir subbasins with large amounts of residential land use showed increasing trends in alkalinity and chloride. In contrast, subbasins distributed throughout the drainage basin showed increasing trends in pH, color, nitrate, and iron concentrations, indicating that these characteristics and constituents may be affected more by atmospheric deposition. Although changing, water-quality constituent concentrations in the Scituate Reservoir Basin only occasionally exceeded Rhode Island and USEPA water-quality guidelines and standards. Result of correlation analysis between pH, color, turbidity, and concentrations total coliform bacteria, sodium, alkalinity, chloride, nitrate, orthophosphate, iron, and manganese and land use, geology, wetlands, slope, soil drainability, and roads indicated that the percentage of wetlands, roads, and slope appear have the greatest effect on water-quality in the Scituate Reservoir Basin. The percentage of urban, residential, and commercial land use also are important, but to a lesser degree than wetlands, roads, and slope. Finally, geology appears to have the least effect on water quality compared to other drainage-basin characteristics investigated.

Rhode Island↗
USGS2025

Evaluation of solid bitumen created from marine oil shale bituminite under hydrous and anhydrous pyrolysis conditions

To test the influence of environmental conditions on aromaticity of solid bitumen generated during petroleum generation, four organic-rich (26–36 wt% total organic carbon) oil shale samples collected from the Neoproterozoic–Lower Cambrian restricted marine Salt Range Formation in the upper Indus Basin, Pakistan, were pyrolyzed under hydrous and anhydrous conditions. Experiments used closed system batch reactors at subcritical water temperatures between 300 and 370°C for 72 h. Thermal conversion of bituminite in the Salt Range oil shales created a newly formed solid bitumen, similar to previous observations from experiments on the Eocene lacustrine Green River Formation Mahogany zone oil shale. Newly formed solid bitumen in the Salt Range Formation oil shales generally has higher reflectance (R o ) in hydrous residues compared to anhydrous experiments subjected to the same time-temperature conditions, also similar to prior observations. This finding supports the hypothesis that radical disproportionation is favored in the presence of hydrogen contributed by water, promoting aromatization in the solid bitumen residue with concomitant increased expulsion of saturated hydrocarbons. Indigenous solid bitumen (and vitrinite in a comparison sample) also shows higher reflectance values in hydrous versus anhydrous residues, indicating that additional aromatization in the presence of exogenous hydrogen occurs both in newly formed organic matter and in organic matter that is present throughout the experiment. Despite similarities in their bulk rock geochemical screening parameters, R o evolution shows different trajectories amongst the four Salt Range oil shales, suggesting as-yet undetermined differences in kinetic properties which are probably related to differences in a priori chemical composition. These results have implications for the use of solid bitumen reflectance (BR o ) as a thermal proxy, suggesting BR o values and appearance could vary as a function of the concentration of water. Variation in water concentration may be present at the reservoir or formation scale, but may also be present at a much finer scale in tight oil shales where permeability is several orders of magnitude lower than conventional reservoirs. Therefore, local variations in the presence of water potentially could explain substantial variation in BR o values and appearance in closely spaced source rock samples and even within an individual microscope field.

Journal of Analytical and Applied Pyrolysis↗
USGS1976

Geotechnical description of four Mississippi Delta soil borings

The submerged portion of the Mississippi Delta complex forms an ideal natural laboratory to study the effects of rapid deposition. One of the most obvious of these effects is the mass movements of sediments. Slump and slide signatures, mudflow characteristics, and evidence for creep are all found in abundance on the delta platform. These types of features have been studied by Colemen and Wright (1974) with regard to form and by Garrison (1974) with regard to their spatial distribution. Assembling these authors' findings, it is clear that the entire offshore zone contiguous with the Mississippi River is a myriad of geological action. This situation is indeed stimulating to the sedimentologist, yet it represents a nightmare to the foundation engineer. Emplacing offshore structures in such an environment is a most difficult task, particularly since the high degree of local variability dictates that each case must be handled separately. It is under these circumstances that a marriage between geology and engineering is most fruitful, for determining the relationships between the sedimentological processes and the engineering properties is satisfying to parties from both disciplines. This, then, is the underlying objective of the Mississippi Delta research project. By investigating the instability in a geologic sense, it is hoped that many of the engineering problems will become more soluble and that extrapolation and prediction will become more realistic.

Mississippi Delta↗
USGS2025

Quaternary-active faults and the role of inherited structures in the Sacramento-San Joaquin Delta, western Central Valley, northern California

Seismic sources and their associated hazards within the Sacramento-San Joaquin Delta region of north-central California are relatively poorly characterized as compared to other, more heavily studied regions of northern California, such as the San Francisco Bay Area. Here we present a synthesis of subsurface, bedrock geology, and geodetic datasets from the Delta and from the Coast Ranges and Diablo Range to the northwest and southwest, respectively. We integrate these data and our own surface geologic and geomorphic observations to present a comprehensive review of faults in the Delta that exhibit Quaternary activity. Structural geologic data from the surrounding region highlight the significant influence that Late Cretaceous-to-Paleogene forearc structures exert on the geometry and kinematics of major Quaternary-active structures within the Delta. These inherited structures — including the Pittsburg-Kirby Hills Fault, Midland Fault, and Great Valley Fault System — exhibit a range of geometries and kinematics. Analysis of geomorphology along these structures suggests that these structures combine to accommodate Quaternary strain across the Delta region. A clearer understanding of subsurface geometries and structural relationships, built upon the regional tectonic history, provides insight into modern deformation accommodated on older structures and helps inform interpretations of seismic hazard within the Delta.

California↗
USGS2024

Unscrambling the Proterozoic supercontinent record of northeastern Washington State, USA

The time interval from Supercontinent Nuna assembly in the late Paleoproterozoic to Supercontinent Rodinia breakup in the Neoproterozoic is considered by some geologists to comprise the “Boring Billion,” an interval possibly marked by a slowdown in plate tectonic processes. In northeastern Washington State, USA, similar to much of western Laurentia, early workers generally thought the tectonostratigraphic framework of this interval of geologic time consisted of two major sequences, the (ca. 1480–1380 Ma) Mesoproterozoic Belt Supergroup and unconformably overlying (<720 Ma) Neoproterozoic Windermere Supergroup. However, recent research indicates that strata considered by early workers as Belt Supergroup equivalents are actually younger, and a post-Belt, pre-Windermere record is present within the <1360 Ma Deer Trail Group and <760 Ma Buffalo Hump Formation. Thus, the northeastern Washington region perhaps comprises the most complete stratigraphic record of the “Boring Billion” time interval in the northwestern United States and holds important insights into global Proterozoic supercontinent tectonic processes. In light of these exciting developments, this field guide will address the early historic economic geology and original mapping of these Proterozoic sequences in the northeastern Washington region, and from that foundation explore more recent isotopic provenance data and their regional to global context. Finally, the guide will end with a discussion of remaining questions with a goal of stimulating interest in these relatively understudied, yet important, rocks.

Washington↗
USGS1997

Application of acoustical methods for estimating water flow and constituent loads in Perdido Bay, Florida

Water flow and quality data were collected from December 1994 to September 1995 to evaluate variations in discharge, water quality, and chemical fluxes (loads) through Perdido Bay, Florida. Data were collected at a cross section parallel to the U.S. Highway 98 bridge. Discharges measured with an acoustic Doppler current profiler (ADCP) and computed from stage-area and velocity ratings varied roughly between + or - 10,000 cubic feet per second during a typical tidal cycle. Large reversals in flow direction occurred rapidly (less than 1 hour), and complete reversals (resulting in near peak net-upstream or downstream discharges) occurred within a few hours of slack water. Observations of simultaneous upstream and downstream flow (bidirectional flow) were quite common in the ADCP measurements, with opposing directions of flow occurring predominantly in vertical layers. Continuous (every 15 minutes) discharge data were computed for the period from August 18, 1995, to September 28, 1995, and filtered daily mean discharge values were computed for the period from August 19 to September 26, 1995. Data were not computed prior to August 18, 1995, either because of missing data or because the velocity rating was poorly defined (because of insufficient data) for the period prior to landfall of hurricane Erin (August 3, 1995). The results of the study indicate that acoustical techniques can yield useful estimates of continuous (instantaneous) discharge in Perdido Bay. Useful estimates of average daily net flow rates can also be obtained, but the accuracy of these estimates will be limited by small rating shifts that introduce bias into the instantaneous values that are used to compute the net flows. Instantaneous loads of total nitrogen ranged from -180 to 220 grams per second for the samples collected during the study, and instantaneous loads of total phosphorous ranged from -10 to 11 grams per second (negative loads indicate net upstream transport). The chloride concentrations from the water samples collected from Perdido Bay indicated a significant amount of mixing of saltwater and freshwater. Mixing effects could greatly reduce the accuracy of estimates of net loads of nutrients or other substances. The study results indicate that acoustical techniques can yield acceptable estimates of instantaneous loads in Perdido Bay. However, estimates of net loads should be interpreted with great caution and may have unacceptably large errors, especially when saltwater and freshwater concentrations differ greatly.

Florida↗
USGS2024

On the provenance of field reports of the 1886 Charleston, South Carolina, earthquake: A seismo-historical whodunnit

Much of what is known about the effects of the 1886 Charleston, South Carolina, earthquake throughout the epicentral region can be attributed to meticulous field investigations by an individual with training in geology and engineering, Earle Sloan ( Clendenin, 1926 ). In a recent study, Bilham and Hough (2024) undertook a detailed analysis of the effects of the earthquake on railroads in the Charleston region, drawing heavily from Sloan’s reports. This exercise identified several inconsistencies in Sloan’s field reports, including understandable measurement imprecision, inferred data entry mistakes, and transcription errors. The study also begged the question, where was Sloan at the time of the mainshock and over the following week? And to what extent did he draw from secondhand information in compiling his reports? On this question Sloan’s reports were sometimes enigmatic, lending themselves to misinterpretation in contemporaneous as well as modern interpretations. Beyond the details that were germane for, and briefly summarized by, the studies of Bilham and Hough (2023 , 2024) , in this report we don our historical seismologist caps to chronicle Sloan’s activities following the earthquake. We summarize our inferences here for the benefit of future scholars who might attempt to retrace either Sloan’s footsteps or our own. This study also serves to highlight Sloan’s singular contributions to earthquake science, which were never published separately.

South Carolina↗
USGS1997

Nutrients and pesticides in ground water of the Ozark Plateaus in Arkansas, Kansas, Missouri, and Oklahoma

A total of 229 ground-water samples were collected from 215 sites as part of the Ozark Plateaus study unit of the National Water-Quality Assessment Program. These samples were collected from 1993 through 1995 using a network of springs and wells with three scale-dependent components. The first component, the study-unit survey, consisted of 99 randomly selected springs and domestic wells in the Springfield Plateau and Ozark aquifers. The second component, two land-use studies, consisted of 42 springs and domestic wells in a poultry-dominated agricultural area and 40 springs and domestic wells in a cattle-dominated agricultural area overlying the Springfield Plateau aquifer. The third component, the small-watershed study, consisted of 4 springs, 18 domestic wells, and 11 monitoring wells in a small basin within the poultry land-use study area. Samples were analyzed for major ions, nutrients, dissolved organic carbon, methylene blue active substances, tritium, and 88 pesticides and metabolites.The water-quality data from these samples were analyzed with descriptive and statistical methods. Nitrite plus nitrate, which was detected more often and in greater concentrations than any of the other nutrients, ranged from less than 0.05 to 25 milligrams per liter as nitrogen. Nitrite plus nitrate concentrations positively correlated to percent agricultural land use around each site. Median nitrite plus nitrate concentrations generally were greater in samples from springs than in samples from wells. Concentrations of nitrite, ammonia, and ammonia plus organic nitrogen were also affected by land use and also by concentrations of dissolved oxygen in the ground water. Concentrations of phosphorus and orthophosphate probably were affected by land use and also by phosphorus solubility. Pesticides were detected in 80 of 229 samples from 73 of 215 sites. A total of 20 pesticides were detected with a maximum of 5 pesticides detected in any 1 sample. The most commonly detected pesticides were tebuthiuron, atrazine, prometon, desethylatrazine, and simazine. Maximum concentrations ranged from 0.003 to 1.0 microgram per liter. The occurrence and distribution of pesticides were related to land use. Percent agricultural land use was greater for samples with pesticides detected than for samples with no pesticides detected. Pesticides were detected more often in samples from springs than in samples from wells. The occurrence of pesticides also was related to seasonality and chemical characteristics, such as solubility and persistence, of the compounds.

Arkansas, Kansas, Missouri, Oklahoma↗
USGS2026

Continental-scale prediction of hydrologic signatures and processes

Understanding how dominant hydrologic processes and their drivers vary across diverse continental-scale landscapes is critical for hydrologic modeling and water management applications. Our research addresses this question by synthesizing large-sample watershed datasets, Caravan and GAGES-II, and developing random forest models to identify patterns in hydrologic function. We assessed dominant processes by examining hydrologic signatures – summary indicators of watershed function derived from hydroclimatic time series and random forest models across 14 146 gauged United States watersheds. The results reveal clear continental-scale gradients in hydrologic processes, including baseflow, overland flow, storage, and water balance losses. Our map of dominant processes highlights, for example, the transition from baseflow to fast responses and back to baseflow along the elevation gradient from the Appalachian spine, through the Piedmont, to the Eastern Coastal Plain; a distinct outer ring around the Great Lakes region; and sharp contrasts between coastal and inland processes in the West. Variable importance analysis from random forest models show that processes in the western U.S. are primarily controlled by climate, whereas in the eastern U.S., soil, geology, and topography play larger roles, with distinct human influences apparent in urban areas. Our approach of estimating dominant processes and their drivers facilitates extending process knowledge from research watersheds to the continental scale, assessing current hydrological understanding, and evaluating hydrological model structures.

conterminous United States↗
USGS1994

Hydrogeology of the Chickasaw National Recreation Area, Murray County, Oklahoma

The Travertine District (Park) of the Chickasaw National Recreation Area, operated and maintained by the National Park Service, is near the City of Sulphur in south-central Oklahoma. The Park was established in 1902 because of its unique hydrologic setting, which includes Rock Creek, Travertine Creek, numerous mineralized and freshwater springs, and a dense cover of riparian vegetation. Since the turn of the century several flowing artesian wells have been drilled within and adjacent to the Park. Discharge from many of these springs and the numbers of flowing wells have declined substantially during the past 86 years. To determine the cause of these declines, a better understanding of the hydrologic system must be obtained. The U.S. Geological Survey, in cooperation with the National Park Service, has appraised hydrologic information obtained for the Park from several studies conducted during 1902-87. The principal geologic units referred to in this report are the Arbuckle Group and the overlying Simpson Group. These rocks are of Upper Cambrian to Middle Ordovician age and are composed of dolomitic limestone, with some sandstones and shales in the Simpson Group. Surface geologic maps give a general understanding of the regional subsurface geology, but information about the subsurface geology within the Park is poor. The Simpson and Arbuckle aquifers are the principal aquifers in the study area. The two aquifers are not differentiated readily in some parts of the study area because of the similarity of the Simpson and Arbuckle rocks; thus, both water-bearing units are referred to frequently as the Arbuckle-Simpson aquifer. The aquifers are confined under the Park, but are unconfined east and south of the Park. Precipitation on the outcrop area of the Arbuckle aquifer northeast and east of the Park recharges the freshwater springs (Antelope and Buffalo Springs) near the east boundary of the Park. The source of water from mineralized springs located in the central part of the Park, and flowing wells within and north of the Park, is believed to be a mix of waters from rocks of the Arbuckle and Simpson Groups. The source of water from two highly mineralized springs, Bromide and Medicine, that ceased to flow in the early 1970’s is believed to be from the Simpson Group. Water-quality characteristics reflect the sources of ground water in the study area. The highly mineralized springs near the western end of the Park are a sodium chloride type with dissolved solids greater than 4,500 mg/L. The freshwater springs near the eastern end of the Park are a calcium bicarbonate type with total dissolved solids of less than 400 mg/L. Flow from the artesian wells has declined substantially during the past 86 years and the wells are estimated to currently discharge only about 10 percent of the total flow reported in 1939. The depletion is believed to be caused by a gradual lowering of the hydraulic head within the aquifer. The influence on the hydrologic system of local municipal and industrial pumping from the Arbuckle-Simpson aquifer is difficult to discern because the system is much more sensitive to precipitation than to pumpage. Ground-water levels and spring flows in this region respond rapidly to precipitation. The effects of withdrawals from the City of Sulphur and Oklahoma Gas and Electric Company power-plant water-well fields are not discernible at wells and springs. The hydrologic system may be influenced by pumping, particularly during extended dry periods of several years, but the impact of pumping on the system cannot be determined without further investigation.

Oklahoma↗
USGS2026

Hydrologic investigation of water level fluctuations at Moreau Lake, Moreau Lake State Park, town of Moreau, New York

The causes of water level fluctuations at Moreau Lake, within Moreau Lake State Park in the town of Moreau, New York, were investigated from 2016 to 2021 after lake water levels dropped between 2015 and 2016, raising concerns about the loss of a shallow swimming area at the park beach. Annual variation in precipitation records from the area did not account for the lake water level decline. Two possible causes for the low lake water levels were investigated: the increase in groundwater withdrawals from new residential development since about 2000 and seasonal changes (nongrowing and growing seasons) in precipitation. Investigation of the potential effects of nearby groundwater withdrawals required the compilation and collection of well-log data, seismic surveys, and measurements of lake and groundwater levels, field chemical parameters, and water isotopes to define the hydrogeologic system and to estimate water use. The net result of this work was the determination that Moreau Lake is a “flow though” lake with no surface water outlet; groundwater enters the lake on the upgradient side and exits through the downgradient side, however, groundwater does not flow southward from the lake toward nearby groundwater withdrawals from the semiconfined aquifer, and thus groundwater withdrawals were unlikely to have an effect on lake water levels. Investigation of the historic precipitation records during nongrowing (November through April) and growing (May through October) indicated that (1) nongrowing season precipitation from 2011–12 to 2015–16 was more deficient than any similar period during the past 78 years and (2) since about 2000, nongrowing seasons have been drier overall and growing seasons have been considerably wetter. Initiation of lake water level monitoring in 2016 provided an opportunity to compare seasonal precipitation with seasonal lake water level changes. Nongrowing season lake water levels are very sensitive to precipitation, such that high precipitation (40 percent above the seasonal median) resulted in a 5-foot rise in lake water level. In contrast, the growing season lake water levels are sensitive to dry conditions; for example, deficient rainfall (about 6 percent below the seasonal median) resulted in a decline of lake water levels of about 3.5 feet. However, lake water levels are insensitive to high growing season rainfall inputs (about 10 to 47 percent above the seasonal median); lake water levels consistently declined about by 0.8 feet above this range of seasonal excessive precipitation.

New York↗
USGS2025

Detecting hidden sedimentary geothermal systems in the Upper Colorado River Basin

Geothermal resources exist in sedimentary rock where circulation of water for efficient extraction or storage of heat is possible. Except in rare instances where hot water is expressed at the land surface, sedimentary geothermal resources are hidden, so the identification of these systems is optimally accomplished using predictive subsurface modeling. An integrated approach using detailed paleogeographic interpretations, subsurface geologic mapping, and numerical modeling has produced regional geologic and temperature models for the Upper Colorado River Basin, a large watershed in central North America that contains many sedimentary basins. These models identify areas of hidden sedimentary geothermal resource potential in low temperature (<90°C), moderate temperature (90–150°C), and high temperature (>150°C) fairways across the study area. These models incorporate maps of key horizons in outcrop and the subsurface to create a robust structural framework that can be used to target favorable geology for natural or engineered permeability. This framework is populated with lithologies derived from detailed palaeogeographical maps and over 40,000 bottom hole temperature (BHT) values were used to create a calibrated three-dimensional (3D) temperature model across the region. The resulting maps serve as a regional sedimentary geothermal play fairway screening tool for evaluating different grades of sedimentary geothermal resources and for identifying areas of interest where more detailed, prospect-scale studies can be undertaken.

Arizona, Colorado, New Mexico, Utah, Wyoming↗
USGS2026

Preliminary bedrock geologic map of the Port Henry quadrangle, Essex County, New York, and Addison County, Vermont

Introduction The bedrock geology of the 7.5-minute Port Henry quadrangle consists of deformed and metamorphosed Mesoproterozoic gneisses of the Adirondack Highlands unconformably overlain by weakly deformed lower Paleozoic sedimentary rocks of the Champlain Valley. The Mesoproterozoic rocks occur on the eastern edge of the Adirondack Highlands and represent an extension of the Grenville Province of Laurentia. Mesoproterozoic paragneiss, marble, and amphibolite hosted the emplacement of an anorthosite-mangerite-charnockite-granite (AMCG) suite, now exposed mostly as orthogneiss, at approximately 1.18–1.15 Ga (giga-annum). In the Port Henry quadrangle, the AMCG metaigneous rocks (Yhg, Ygb, Yanw) intruded older, mostly metasedimentary rocks of the Grenville Complex during the middle to late Shawinigan orogeny (~1,160–1,150 Ma [mega-annum]). All rocks were subsequently metamorphosed to upper amphibolite to granulite facies conditions during the 1,080–1,050 Ma Ottawan orogeny. New mapping reveals four periods of deformation: (1) D1 produced rarely preserved isoclinal folds in the paragneiss and marble and predates AMCG magmatism. (2) Subsequent D2 deformation produced the dominant gneissic fabric preserved in the rock, recumbent folding, and deformed all the Proterozoic units in the map area. Syn- to late-D2 felsic magmatism resulted in the regionally extensive Lyon Mountain Granite Gneiss, which hosts numerous magnetite ore bodies. (3) Mylonitic extensional shear zones and core complex formation marked the beginning of D3 deformation. Protracted D3 deformation resulted in F3 upright folding, dome and basin formation, pegmatite intrusion, reactivation of the S2 foliation, partial melting, metamorphism, metasomatism, iron-ore remobilization, and intrusion of magnetite-bearing pegmatite both as layer-parallel sills and crosscutting dikes. (4) D4 created northeast- and northwest-trending local high-grade ductile shear zones and boudinage, northwest-trending regional kilometer (km)-wide ductile shear zones, and crosscutting granitic pegmatite dikes. The development of the late-stage regional shear zones (D4) was likely due to the continuation of extensional doming and uplift from upper amphibolite facies conditions at the end of the Ottawan orogeny. The majority of iron-ore deposits in the Port Henry and adjacent Witherbee quadrangles are in the hanging wall of these extensional shear zones. In the Port Henry quadrangle, the km-wide Cheney Mountain shear zone is the result of D4 deformation. Kilometer-scale lineaments readily observed in lidar data are Ediacaran mafic dikes and Phanerozoic brittle faults. The Paleozoic rocks are part of the Early Cambrian to Late Ordovician carbonate bank on the ancient margin of Laurentia. The approximately 1-km-thick Cambrian to Ordovician stratigraphy records a transition from synrift clastics to passive-margin peritidal carbonate buildups to gradually deeper-water subtidal- to shelf-carbonates during foreland basin development associated with the Taconic orogeny. The Paleozoic rocks are weakly folded and block faulted. Large areas of the Champlain Valley are covered by undifferentiated glacial deposits, some of which contain mapped landslides. The map also shows waste rock piles and tailings from historical mining operations. This study was undertaken to improve our understanding of the bedrock geology in the Adirondack Highlands, establish a modern framework for 1:24,000-scale bedrock geologic mapping in the Adirondacks, provide a context for historical iron mines in the eastern Adirondacks, and update the stratigraphy of the Champlain Valley in New York and Vermont. This Open-File Report includes a bedrock geologic map; a description of map units; a correlation of map units; and a geographic information system database that includes bedrock geologic units, faults, outcrops, and structural geologic information.

New York, Vermont↗
USGS2025

Systematic approach to prioritize wells for effective groundwater monitoring and management in the Arkansas Headwaters Basin, Colorado, USA

Study region The Arkansas Headwaters Basin, an intermountain basin in the Southern Rocky Mountains of North America. Study focus Our specific focus is choosing a set of wells to support a possible future regional groundwater-surface water model that would support water management. We present a three-step process using multiple criteria to score, predict, and choose prioritized wells that capture the full distribution of data including extremes. The three-step process provides accessible visualizations, fiscally efficient well prioritization, and screening useful for subsequent groundwater modeling. The novelty of the proposed methodology is the systematic approach integrating a scoring and a predictive approach to support a selection path. The systematic approach may be broadly adapted for other basins. New hydrological insights for the region Understanding regional hydrology hinges on efficient collection of hydrologic data that captures the relevant dynamics including extremes. The present study, a case study for a particular basin in the Southern Rocky Mountains, is the first use of a scripted (R software) strategy to select an economical and representative set of monitoring wells. Our findings suggest caution when using proximity as a proxy for correlation, because proximal wells in the same geologic formation and similar depths are not always correlated. In the Arkansas Headwaters Basin, subsurface geology may be less influential on groundwater elevations than broader hydrologic influences, such as regional drought.

Colorado↗
USGS2024

Geologic map of Scoggins Dam, Henry Hagg Lake, and Scoggins Valley, Washington County, Oregon

New geologic mapping (Wells and others, 2020b) and geophysical mapping (Blakely and others, 2000; McPhee and others, 2014; Wells and others, 2020a) document kilometers of Cenozoic right-lateral offset along the Gales Creek Fault Zone, a major, northwest-striking fault zone forming the boundary between the Tualatin Valley and the Coast Range. The Bureau of Reclamation’s (Reclamation) Scoggins Dam (fig. 1), in the Coast Range foothills west of Forest Grove, Oregon, lies within the Gales Creek Fault Zone as mapped by Wells and others (2020a, 2020b; fig. 2). Active faults of the Gales Creek Fault Zone defined by paleoseismic trenching (Redwine and others, 2017, 2019b, Horst and others, 2018, 2019, 2021, and Wells and others, 2020a) are presently mapped as projecting through the existing dam. The Pacific Northwest Region of Reclamation requested assistance with geologic studies around Scoggins Dam to provide better understanding of fault locations and their activity, which are needed to design a modification of the dam (Maguire, 2019a, b). The scope of this project includes detailed geology of the existing Scoggins Dam site, Henry Hagg Lake, the reservoir behind the dam, and Scoggins Valley downstream of the existing dam, particularly around a potential new dam site, where Scoggins Creek cuts through a narrow gap formed by a resistant felsic tuff bed that crosses the valley.

Oregon↗