Geology Reports⌕ Search

USGS · ofr20221023

Compilation and evaluation of data used to identify groundwater sources under the direct influence of surface water in Pennsylvania

Abstract

A study was conducted to compile and evaluate data used to identify groundwater sources that are under the direct influence of surface water (GUDI) in Pennsylvania. In the early 1990s, the Pennsylvania Department of Environmental Protection (PADEP) implemented the Surface Water Identification Protocol (SWIP) for the identification of GUDI sources. Since the establishment of the SWIP, PADEP has classified more than 500 individual sources across Pennsylvania as GUDI, but Pennsylvania’s complex geology and physiography provide a challenge for a uniform method of GUDI determination. Components used in this study to compile and evaluate data associated with GUDI determination include: (1) a preliminary review of file information for 43 public water-supply wells, (2) quality control and addition of data to PADEP’s database for public water-supply systems to prepare data for analysis, and (3) exploratory evaluation of existing GUDI sources in the database with respect to hydrogeologic and source-construction characteristics that are currently utilized in the assessment methodology. Case files for 43 wells from PADEP’s Northcentral and Southcentral regions were reviewed to: (1) provide a better understanding of how the SWIP was applied in practice, (2) verify and compile missing data, and (3) find additional attributes not previously available that might explain a well’s categorization as GUDI. Review of file information showed that the SWIP outlined in PADEP technical guidance was usually followed, but for some sources, the GUDI determination was more complex and could not be easily summarized. Data compiled for study analyses provided by PADEP include source data derived from public water-supply system case files, a source-information database for public water-supply systems, and Microscopic Particulate Analysis (MPA) results and associated water-quality data for public water-supply system groundwater sources. Data from the Pennsylvania Drinking Water Information System (PADWIS) , which is PADEP’s database for public water-supply systems, were also used for this study. The PADWIS database originally included data for 12,147 groundwater sources (11,812 groundwater sources not under the direct influence of surface water (non-GUDI) wells and 335 GUDI wells). A subset (4,018 wells consisting of 3,842 non-GUDI wells and 175 GUDI wells) of the PADWIS database was created for an analysis and includes only community wells evaluated in accordance with the SWIP. MPA results for 631 community and noncommunity wells were compiled, along with associated water-quality data (alkalinity, chloride, Escherichia coli , fecal coliform, nitrate, pH, sodium, specific conductance, sulfate, total coliform, total dissolved solids, total residue, and turbidity) populated from the PADEP Bureau of Laboratories Sample Information System. Data compiled from sources other than PADEP include spatial data, both naturogenic (for example, average precipitation or distance to closest hydrologic feature) and anthropogenic (for example, percentage of developed or agricultural land cover within a specific vicinity of a public water-supply system well) data representing spatially derived variables. Comparison among wells in the PADWIS dataset subset using the nonparametric Kruskal-Wallis test showed that GUDI wells had significantly older median construction years, shallower depths, and static water levels closer to the land surface than non-GUDI wells and that carbonate aquifers had the highest percentages of wells designated as GUDI (12 percent; 57 wells). Further comparison of wells in the PADWIS database subset using the Spearman’s rho monotonic correlation test illustrated that public water-supply wells designated as GUDI largely occur in unconfined aquifers and have high average yield and shallow static water levels. Assessment of the MPA database subset using the Kruskal-Wallis test showed wells with MPA total risk-factor scores that exceeded zero had older median construction years and shallower casing depths than wells with MPA total risk-factor scores of zero and that carbonate aquifers had the highest percentages of wells with MPA total risk-factor scores exceeding zero (30 percent; 63 wells). Spearman’s rho correlations showed that wells completed in aquifers with depths to major water-bearing zones closer to the land-surface had higher total risk-factor scores resulting from MPA samples. Based on the results of the analyses described in this report, broad conclusions can be drawn regarding site-specific well characteristics as well as anthropogenic and naturogenic factors that could be responsible for a well being designated as GUDI, but the accuracy of these results is dependent on the quality of the data being analyzed. Ultimately, study results serve as an added resource for initial desktop screening of wells to determine if additional site-specific investigation is warranted and underscore the need for field evaluation.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 39.7198° to 42.26986° latitude; -80.519891° to -74.689516° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Eliza L. Gross, Matthew D. Conlon, Dennis W. Risser, Chad E. Reisch. 2022-05-09. Compilation and evaluation of data used to identify groundwater sources under the direct influence of surface water in Pennsylvania. https://doi.org/10.3133/ofr20221023

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June), 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov.

Open-File Report↗

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗