Geology ReportsSearch

USGS · 70259717

Cooperative joint inversion of magnetotelluric and microseismic data for imaging the Geysers geothermal field, California, USA

Abstract

The Geysers geothermal field located in northern California, USA, is the world’s largest electricity-generating geothermal facility. To delineate the spatio-temporal distribution of reservoir steam and recharge water, we have collected microseismic and magnetotelluric (MT) data using a dense array of stations in 2021. The microseismic and MT data have been inverted together using a 3D cooperative joint inversion workflow. The joint inversion exploits a cross-gradient structural constraint because electrical conductivity structures observed in the geothermal field are strongly correlated with

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Evan Um, Michael Commer, Roland Gritto, Jared R. Peacock, David Alumbaugh, Steve P. Jarpe, Craig Hartline. 2023-06-21. Cooperative joint inversion of magnetotelluric and microseismic data for imaging the Geysers geothermal field, California, USA. https://doi.org/10.1190/geo2022-0521.1

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Inversion of induced polarization-affected towed-transient electromagnetic data in a lateritic regolith geology: A case study from western Tanzania

For several decades, induced polarization (IP) effects on transient electromagnetic (TEM) responses have been observed. These effects can manifest as late-time negative transients or as rapidly decaying curves and are usually associated with highly polarizable bodies. If neglected, IP effects can lead to erroneous resistivity models. Recent work allows IP effects to be incorporated into the inversion of TEM data on a more routine basis. In a recent field survey in western Tanzania, strongly IP-affected TEM signals are observed using a towed-transient electromagnetic (tTEM) system. The survey have been carried out to locate drinking water resources in a weathered regolith setting. In these settings, an inversion of tTEM data using a resistivity-only forward model (i.e., IP neglected) cannot fit the data and severely limits the value of the TEM data for hydrogeologic interpretation. To account for IP effects, we have applied a modified version of the Cole-Cole model called the maximum phase angle (MPA) model to invert IP-affected tTEM data. The MPA model incorporates four inversion model parameters: resistivity ( ⁠ ρ "> ρ ), MPA ( ⁠ ϕ max "> ϕ max ⁠ ), relaxation time ( ⁠ τ "> τ ), and frequency exponent ( ⁠ c "> c ). The MPA model fits the data well and improves the reliability of the resistivity model. In much of the surveyed region, the inverted models using MPA display a three-layer system consisting of an upper resistive laterite layer of varying thickness and an intermediate polarizable conductive unit overlying more resistive weathered basement rocks. The conductive polarizable layer is interpreted as a chemically weathered saprolite separating the surficial and deeper aquifers. Overall, tTEM inversion results provide a local understanding of groundwater systems, especially in such regions with very limited subsurface knowledge.

Kaguruka, Kitagata

Evidence-based guidelines for protective actions and earthquake early warning systems

Earthquake early warning systems (EEW) are becoming increasingly available or in development throughout the world. With public alerting in Mexico, Japan, Taiwan, and parts of the United States, it is important to provide evidence-based recommendations for protective action so people can protect themselves when they receive an alert. Best-practice warning communication research suggests that providing a protective action will increase the efficacy of the message. However, given the diversity of earthquakes and building types, as well as social and cultural contexts where these systems exist, the question is: what is the best protective action to recommend? The answer lies in maximizing life-saving protective actions during an earthquake event requires both contextually relevant messaging and widespread public education about appropriate protective actions under a range of conditions. By researching previous earthquake injury literature, examining current best practices and public education campaigns, key protective actions may be determined and used to increase the life-saving potential of earthquake early warning systems.

Geophysics

Integrated geophysical imaging of rare-earth-element-bearing iron oxide-apatite deposits in the eastern Adirondack Highlands, New York

The eastern Adirondack Highlands of northern New York host dozens of iron oxide-apatite (IOA) deposits containing magnetite and rare earth element (REE)-bearing apatite. We use new aeromagnetic, aeroradiometric, ground gravity, and sample petrophysical and geochemical data to image and understand these deposits and their geologic framework. Aeromagnetic total field data reflect highly magnetic leucogranite host rock and major structures that likely served as fluid conduits for the hydrothermal system. Bandpass filtering of the aeromagnetic data reveals individual deposits that were verified in the field or from historical records. A three-dimensional inversion for magnetic susceptibility images these deposits at depth, allowing inference of plunge directions and relative size. Radiometric data highlight variations in the surface geology and several large tailings piles that contain REE-bearing apatite. Within the host rock, eTh (equivalent Th), K and the eTh/K ratio are variable with high eTh/K near several of the IOA deposits. Areas with elevated K or low eTh/K representing potassic alteration appear to be rare; instead elevated eTh/K ratios likely reflect widespread sodic alteration overprinting potassic alteration. Bouguer gravity anomalies show limited correspondence to the surface geology, radiometric data, or magnetic data, but do exhibit ~10-km wide highs in areas where deposits are observed. Two-dimensional forward models of the gravity and magnetic data show that deeper dense material beneath the leucogranite is quantitatively feasible. If these dense rocks represent intrusions that were emplaced or still cooling at the time of mineralization, they may have served as a heat source that helped to drive the hydrothermal system. Combining datasets, we find that deposits occur towards the distal ends of major structures within the host leucogranite and mostly above gravity highs. The geophysical modeling thus suggests that IOA deposits formed in structural, thermal, and chemical traps near the distal ends of the hydrothermal system.

New York