Complex hydrology and variability of nitrogen sources in a karst watershed

John W. Clune; Charles A. Cravotta; Admin Husic; Hilary J Dozier; Kurt Eric Schmidt

doi:10.1002/jeq2.20578

Home/Archive/USGS

USGS · 70255926

Complex hydrology and variability of nitrogen sources in a karst watershed

John W. Clune·Charles A. Cravotta·Admin Husic·Hilary J Dozier·Kurt Eric Schmidt

View original source ↗Export metadata ↓

Abstract

Streams draining karst areas with rapid groundwater transit times may respond relatively quickly to nitrogen reduction strategies, but the complex hydrologic network of interconnected sinkholes and springs is challenging for determining the placement and effectiveness of management practices. This study aims to inform nitrogen reduction strategies in a representative agricultural karst setting of the Chesapeake Bay watershed (Fishing Creek watershed, Pennsylvania) with known elevated nitrate contamination and a previous documented groundwater residence time of less than a decade. During baseflow conditions, streamflow did not increase with drainage area. Headwaters and the main stem lost substantial flow to sinkholes until eventually discharging along large springs downstream. Seasonal hydrologic conditions shift the flow and nitrogen load spatially among losing and gaining stream sections. A compilation of nitrogen source inputs with the geochemistry and the pattern of enrichment of δ 15 N and δ 18 O suggest that the nitrogen in streams and springs during baseflow represents a mixture of manure, fertilizer, and wastewater sources with low potential for denitrification. The pH and calcite saturation index increased along generalized flow paths from headwaters to springs and indicate shorter groundwater residence times in baseflow during the spring versus summer. Given the substantial investment in management practices, fixed monitoring sites could incorporate synoptic water sampling to properly monitor long-term progress and help inform management actions in karst watersheds. Although karst watersheds have the potential to respond to nitrogen reduction strategies due to shorter groundwater residence times, high nitrogen inputs, effectiveness of conservation practices, and release of legacy nutrients within the karst cavities could confound progress of water quality goals.

Explore related subjects

Journal of Environmental Quality Article

Source-reported bounding extent: 40.98993659464011° to 41.44436215062939° latitude; -76.8086844380523° to -75.83891540849118° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

BibTeX RIS

John W. Clune, Charles A. Cravotta, Admin Husic, Hilary J Dozier, Kurt Eric Schmidt. 2024-06-02. Complex hydrology and variability of nitrogen sources in a karst watershed. https://doi.org/10.1002/jeq2.20578

Cite the original work for its findings. Save a collection to share your selection of sources.

Discover connections

Article subject Pennsylvania place United STates place

Connections use source metadata and explicit phrase matches, not verified experimental comparisons.

KEEP EXPLORING

Related USGS reports

USGS2026

Assessing environmental drivers of denitrification in restored riverine floodplains

Restoration of impaired floodplains is an increasingly prevalent strategy for alleviating water quality concerns and reducing downstream flooding at watershed scales. Floodplains temporarily store water and slow flow velocity to promote sedimentation during overbank flooding and remove inorganic nitrogen from floodwater and groundwater via denitrification. Evaluating the impacts of different restoration strategies on denitrification can inform more strategic investments into floodplain modifications that improve water quality outcomes. Our research investigates how denitrification rates in floodplains respond to environmental factors that are actionable from an engineering perspective through design and water resources management. We seasonally measured soil denitrification enzyme activity and various environmental characteristics in 4 floodplains with different restoration design and management approaches at the confluence of the Wabash and Tippecanoe Rivers in Indiana, United States. Our results showed that denitrification rates in an agricultural floodplain were significantly lower than in restored floodplains with native vegetation. Certain soil conditions characteristic of floodplain wetlands were associated with higher denitrification, particularly elevated total nitrogen, moisture, silt, and organic matter contents. Vegetation species composition was correlated with denitrification rates. This link may reflect the direct effects of vegetation on soil conditions, such as supplying labile organic carbon, or indirect effects, such as vegetation acting as an indicator of hydrologic regime and land use. Denitrification seasonally varied, peaking in winter when nitrate supply from rivers draining agricultural watersheds in the region is also high. Substrate limitation of soil denitrification enzyme activity was most significant during the summer when overbank flooding, which replenishes soil nitrogen stocks, rarely occurs. Our findings indicate that denitrification capacity will likely be maximized in riverine floodplains that are restored as wetlands with diverse native vegetation and enhanced hydrologic connectivity. Such restoration activities promote higher denitrification rates via elevated moisture, fine sediment deposition, and soil organic matter.

Tippecanoe River, Wabash River↗

USGS2025

Review: The hydrogeology of critical mineral resources relevant to the energy transition

Attaining the goals of the international treaty on climate change (the Paris Agreement) will greatly increase the demand for the critical minerals required to implement clean-energy technologies. This poses both challenges and opportunities to the hydrogeologic community from several perspectives. Here, important insights that the hydrogeological sciences have to offer for mineral exploration, mineral production, and addressing environmental issues related to mining and mine decommissioning are summarized. This study focuses on copper, cobalt, lithium, and rare earths to represent the broad spectrum of critical minerals and illustrate their relevance by referring to projected demands and production rates. The current understanding of the hydrogeologic processes that form major deposits of these minerals are then summarized. Ore is defined as the naturally occurring material from which minerals of economic value can be extracted, where most ore deposits are the products of complex hydrogeologic couplings between fluid flow, heat transport, solute transport, chemical reactions, and mechanical deformation. Exploration models for the discovery of deeper, hidden deposits are potentially informed by hydrogeologic theory and hydrogeochemical processes. Hydrogeologic understanding and methods are also essential to production and recovery. Longstanding challenges are mine dewatering and (conversely) mine water supply, as well as mineral-extraction practices such as spoil heap leaching and in situ mining. New challenges arise from element extraction from subsurface brines. Finally, the quantity of water use and potential environmental impacts of mining on water quality are at the core of ‘social license’: the approval and acceptance of society to mining activities.

Hydrogeology Journal↗

USGS2025

Component identification of solid biomass fuels using reflected light microscopy: Interlaboratory study 2

As nations transition toward sustainable energy systems , biomass has become a vital component of global energy portfolios. Derived from organic materials such as wood, agricultural residues, forestry byproducts, and organic waste, biomass is a renewable energy source with significant environmental and economic benefits. Responsible biomass energy production can improve waste management, reduce emissions of greenhouse gases, and mitigate environmental pollution. However, as the diversity of biomass-derived fuels increases, robust quality assessment methods are essential to ensure their efficiency, safety, and minimal environmental impact. Reflected light microscopy (RLM) is one such technique with the potential to complement conventional physico-chemical analyses by enabling a rapid identification of material constituents and impurities. To refine this methodology and evaluate the reproducibility of solid biomass component identification using RLM, an interlaboratory study (ILS) was conducted. The study involved the recognition of 58 components across 45 photomicrographs, with the participation of 65 scientists and students from 25 countries. The participants faced high difficulty identifying some of the marked components, and as a result, the percentage of correct answers ranged from 19.0 % to 98.3 %, with an average correct identification rate of 62.7 %. The most challenging aspects of the identification process included distinguishing between woody and non-woody (agro) biomass, accurately identifying petroleum-derived materials, and differentiating agro biomass from inorganic matter. The results suggest that while RLM is an important tool for characterizing solid biomass, further development of methodology guidelines and training are necessary to enhance its effectiveness. Future research should prioritize preparing detailed, image-rich, microscopic morphological descriptions of biomass fuel components, which could improve the accuracy and reliability of using RLM in biomass fuel characterization.

International Journal of Coal Geology↗