Geology ReportsSearch

USGS · 70206802

India National Gas Hydrate Program Expedition-02: Operational and technical summary

Abstract

The India National Gas Hydrate Program is being steered by the government of India's Ministry of Petroleum and Natural Gas (MoPNG) with participation of Directorate General of Hydrocarbons (DGH), Oil and Natural Gas Corporation Limited (ONGC), and the National Oil Companies and Research Institutes of India. The India National Gas Hydrate Program Expedition 01 (NGHP-01) established the presence of gas hydrate in the Krishna Godavari (KG) and Mahanadi Basins and in the offshore area of the Andaman Sea Basin. However, the gas hydrates discovered during NGHP-01 were mainly distributed as fracture-filling material in fine-grained clay-rich sediments. The India National Gas Hydrate Program Expedition 02 (NGHP-02) was carried out with an objective to discover gas hydrate in sand-rich sediment along the eastern offshore margin of India. ONGC planned and executed NGHP-02 on the behalf of the MoPNG. NGHP-02 started on March 3, 2015 and was completed on July 28, 2015 (total 147 days) using the Japanese scientific Drilling Vessel Chikyu (D/V Chikyu). During NGHP-02, 42 holes at 25 sites were drilled, cored, and/or surveyed with downhole logging tools. These sites were located in four areas along the eastern margin of India and formally named Area A (Mahanadi Basin, three sites), Area B (northern part of the KG-Basin, twelve sites), Area C (central part of the KG-Basin, six sites), and Area E (southern part to the KG-Basin, four sites). All 25 sites established during NGHP-02 were first drilled and logged with logging-while-drilling (LWD) tools and an additional 17 holes were then drilled and/or cored with conventional coring tools (HPCS/ESCS) or pressure coring tools (PCTB). Wireline logging was conducted in 10 holes and formation tests using a dual packer Modular Formation Dynamics Tester (MDT) tool were carried out in two holes. The onboard science team used the laboratory facilities on the D/V Chikyu to examine and analyse the physical properties, geochemistry, and sedimentology of all the cores collected during the expedition. Core samples were also analysed in additional post-expedition shore-based studies conducted in numerous domestic and international gas hydrate research laboratories. The NGHP-02 sediment cores were archived at the National Gas Hydrate Core Repository in Mumbai (India), which is associated with the ONGC Gas Hydrate Research and Technology Centre (GHRTC). The necessary data for characterizing the occurrence of gas hydrate, such as interstitial water chlorinities, core-derived gas chemistry, physical and sedimentological properties, thermal images of the recovered cores, pressure core and downhole measured logging data (LWD and/or conventional wireline log data), were obtained from most of the drill sites established during NGHP-02. Almost all the drill sites yielded evidence for the occurrence of gas hydrate; however, the inferred in situ concentration of gas hydrate varied substantially from site to site. For the most part, the interpretation of downhole logging data, core thermal images, interstitial water analyses, and pressure core images from the sites established during NGHP-02 indicate that the occurrence of concentrated gas hydrate is mostly associated with coarser grained (sand-rich) sediments. This paper presents the operational and technical summary of NGHP-02. NGHP-02 started on March 3, 2015 and was completed on July 28, 2015 (total 147 days) using the Japanese scientific Drilling Vessel Chikyu (D/V Chikyu). During NGHP-02, 42 holes at 25 sites were drilled, cored, and/or surveyed with downhole logging tools. These sites were located in four areas along the eastern margin of India and formally named Area A (Mahanadi Basin, three sites), Area B (northern part of the KG-Basin, twelve sites), Area C (central part of the KG-Basin, six sites), and Area E (southern part to the KG-Basin, four sites). All 25 sites established during NGHP-02 were first drilled and logged with logging-while-drilling (LWD) to

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 7.96553° to 35.49401° latitude; 68.17665° to 97.40256° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Pushpendra Kumar, Timothy S. Collett, K. M. Shukla, U. S. Yadav, M. V. Lall, Krishna Vishwanath. 2019. India National Gas Hydrate Program Expedition-02: Operational and technical summary. https://doi.org/10.1016/j.marpetgeo.2018.11.021

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Characterization of a complex sand-rich gas hydrate reservoir system in the Indian marine continental margin with downhole log and seismic data

Logging-while-drilling (LWD) and coring data were acquired in Areas A, B, C and E during the National Gas Hydrate Program Expedition 02 (NGHP-02). At Sites NGHP-02-16, −17, −20, −23 and −24 of Area B in the Indian Krishna-Godavari Basin, the gas hydrate-bearing sand-rich reservoirs directly in contact with an underlying water-saturated sediment were revealed near the seismic-inferred bottom simulating reflector (BSR) along a large anticlinal structure. Lithofacies analysis of cores show that the lower gas hydrate-bearing reservoir section at these sites is an interbedded unit with thin fine-sand layers alternating with clay-rich layers. We reanalyzed the LWD data including resistivity, compressional-wave and shear-wave acoustic velocities to assess and compare the spatial variation of sand-hosted gas hydrate and possible related free-gas accumulations. The presence of free gas-bearing sediments in direct contact with gas hydrate-bearing sediments was confirmed at Sites NGHP-02-20 and −24 along the northeastern flank of the anticline. The sand-rich reservoirs associated with the Area B anticlinal feature reveal different pore-filling constituents and variable boundary conditions, including gas hydrate/water contacts and gas hydrate/free gas contacts. We infer that the sedimentary depositional history at Sites NGHP-02-20 and −24, may have resulted in an upward shift of the base of gas hydrate stability zone, that could have led to in situ gas hydrate dissociation and the accumulation of free gas and coexistence interval below the log-inferred gas hydrate-bearing reservoir sections. This study demonstrates that reservoir heterogeneity and fluid migration were major factors affecting the distribution of gas hydrate and free gas in the identified sand-rich reservoirs.

Journal of Marine and Petroleum Geology

Diatom influence on the production characteristics of hydrate-bearing sediments: Examples from Ulleung Basin, offshore South Korea

The Ulleung Basin Gas Hydrate field expeditions in 2007 (UBGH1) and 2010 (UBGH2) sought to assess the Basin's gas hydrate resource potential. Coring operations in both expeditions recovered evidence of gas hydrate, primarily as fracture-filling (or vein type) morphologies in mainly silt-sized, fine-grained sediment, but also as pore-occupying hydrate in the coarser-grained layers of interbedded sand and fine-grained systems. A commonality across many of these occurrences is the presence of diatoms in the fine-grained sediment. Here we tested fine-grained sediment (median grain size <12.5 μm) associated with hydrate occurrences at four UBGH2 sites (UBGH2-2-2, UBGH2-3, UBGH2-6 and UBGH2-11) to investigate potential impacts of diatoms on efforts to extract methane from hydrate, or to tap hydrocarbon reservoirs beneath hydrate-bearing sediment. Two key considerations are: the extent to which diatoms control sediment mechanical properties, and the extent to which pore-water freshening, which occurs as gas hydrate breaks down during resource extraction, alters the diatom control on sediment mechanical properties. We conducted experiments to measure sediment index properties, sedimentation behavior and compressibility to address these considerations. We relied on scanning electron microscope (SEM) imagery and X-ray powder diffraction (XRD) to characterize the sediment mineralogy. Our high-level findings are that at the ∼20–45% (by volume) diatom concentrations observed at these UBGH2 sites, sediment compressibility increases with diatom content, but diatoms only appear to increase porosity and permeability at the highest diatom concentration (∼45%). Our measurements suggest in situ compression indices of 0.35–0.55 and permeabilities on the order of 0.01milliDarcies (1 × 10 −17 m 2 ) can be anticipated at these sites. Importantly, these properties are not expected to vary significantly upon pore water freshening that accompanies gas hydrate dissociation during production.

East Sea, Ulleung Basin

Multiple physical properties of gas hydrate-bearing sediments recovered from Alaska North Slope 2018 Hydrate-01 Stratigraphic Test Well

Knowledge of the petrophysical and geomechanical properties of gas hydrate-bearing sediments is essential for predicting reservoir responses to gas production from gas hydrate reservoirs. In December 2018, Stratigraphic Test Well Hydrate-01 was drilled in the western part of the Prudhoe Bay Unit, Alaska North Slope, as part of the technical planning effort for a future long-term gas hydrate production test. Side-wall pressure coring was conducted to recover gas hydrate-bearing sediments from two reservoir sections named Unit B and Unit D. A total of 34 cores were successfully recovered during five runs of a wireline deployed pressure corer, and a total of 17 cores were preserved for advanced laboratory analysis. The samples were frozen inside the pressure core autoclave by liquid nitrogen while at high pressure before being removed and stored under liquid nitrogen at atmospheric pressure. High-resolution X-ray computed tomography showed the samples were high-quality, with undisturbed lithological layers. The Unit B and D sediments were categorized as sand or sandy silt with high hydrate saturation. Gas compositions suggest the hydrates formed with thermogenic and microbial mixed gases. Permeability tests and triaxial compression tests were conducted on the hydrate-bearing sediments. Low strengthening and high permeability at hydrate saturation S h > 80% were observed. There was a small permeability reduction during the triaxial compression tests owing to porosity loss with increasing effective stress in the highly permeable sandy sediment after hydrate dissociation. The apparent minimal changes in porosity and permeability during the tests were due to the low-clay content and low compressibility of the quartz sand grains in the recovered cores. X-ray powder diffraction and thermal conductivity analysis also suggested a high quartz content for the analyzed samples.

Alaska