Geology topics

Pushpendra Kumar

Publications and source records attributed to Pushpendra Kumar.

15 recordsLinked to original sources

USGS2022

A review of the exploration, discovery, and characterization of highly concentrated gas hydrate accumulations in coarse-grained reservoir systems along the Eastern Continental Margin of India

The analysis of 3-D seismic data has become one of the most powerful ways to identify sand-rich gas hydrate reservoir systems and to directly identify highly concentrated gas hydrate prospects. Scientific drilling programs have shown that the occurrence of highly concentrated gas hydrate accumulations in coarse-grained, sand-rich, reservoir systems has a significant impact on the physical properties of sediments, allowing gas hydrates to be “directly detected” by conventional seismic analysis techniques. One of the most diagnostic responses of a gas hydrate-bearing sand reservoir is that of a high-velocity sedimentary section and an associated high-amplitude seismic response with a reflection polarity matching that of the seafloor. Knowledge of this physical relationship guided the Indian National Gas Hydrate Program Expedition 02 (NGHP-02) in their pre-drill site review and selection effort along the eastern continental margin of India in 2016. Within the planning, operational and post-operational data analysis phases of the NGHP-02 Expedition, scientists relied heavily on the analyses of the (1) pre-expedition acquired 3-D seismic data from offshore India, (2) downhole logging data acquired during NGHP-02 and (3) core samples and data obtained from NGHP-02 conventional- and pressure-cores to identify gas hydrates and assess the geologic controls on the formation and stability of these accumulations. Data analysis has confirmed the presence of extensive sand-rich depositional systems throughout the deepwater portions of the Krishna-Godavari and Mahanadi Basins in the Bay of Bengal. Two areas of the Krishna-Godavari Basin contain substantial gas hydrate accumulations in sand-rich systems, representing candidate sites for future potential energy exploitation.

Bay of Bengal, Krishna-Godavari Basin, Mahanadi Ba↗

USGS2019

Permeability variation and anisotropy of gas hydrate-bearing pressure-core sediments recovered from the Krishna–Godavari Basin, offshore India

Permeability measurements were conducted on gas hydrate-bearing pressure-core sediments recovered from the Krishna-Godavari Basin during India's National Gas Hydrate Program Expedition 02. Pressure cores collected in the deep seabed of the Indian Ocean were cut and stored under high pressure and low temperature on the D/V Chikyu using pressure core analyzing tools. A total of 25 1.2-m storage chambers were transferred to Japan from India for pressure core studies using pressure-core analysis tools at the National Institute of Advanced Industrial Science and Technology. The sediment core's pressure and temperature were maintained within the hydrate stability conditions during the entire process of transfer and loading into a triaxial testing apparatus called TACTT, which can simulate the in-situ stress state under triaxial conditions. The hydrate saturation of the samples was in the range of 50¬90%. It was found that the initial effective water permeability was in range of 0.01 mD to tens of mD, depending on the hydrate saturation and the mean particle size of the host sediment. The hydrate pore space morphology is also a critical factor, and results suggest hydrates are forming in the pore centers, but also as a sediment grain coating. In a first for gas hydrate-bearing pressure cores, the permeability anisotropy was established via vertical and horizontal flow tests combined with a pore fluid flow simulation. The horizontal/vertical permeability ratio was found to be 4. Additionally, the effective stress dependency of permeability was investigated by performing flow tests at different effective stresses. Due to decreasing porosity and particle crushing, the permeability dropped by approximately 90% for an effective stress increase of 10 MPa.

Krishna–Godavari Basin↗

USGS2019

Compressibility and particle crushing of Krishna-Godavari Basin sediments from offshore India: Implications for gas production from deep-water gas hydrate deposits

Depressurizing a gas hydrate reservoir to extract methane induces high effective stresses that act to compress the reservoir. Predicting whether a gas hydrate reservoir is viable as an energy resource requires enhanced understanding of the reservoir’s compressibility and susceptibility to particle crushing in response to elevated effective stress because of their impact on the long-term permeability and geomechanical stability of the reservoir. This study investigates physical and geomechanical properties of natural sediments with and without tetrahydrofuran (THF) hydrate subjected to high effective stresses of up to 25 MPa. Experimental results show the stiffness of hydrate-free sediments is mainly governed by the stress state and history, while the stiffness of hydrate-bearing sediments reflects both the grain supporting nature of the interconnected hydrate phase and stress effects. The Poisson’s ratio of hydrate-bearing sediments at low stresses is dominated by the Poisson’s ratio of the interconnected pore-filling phases, and dominated at high stresses by elastic properties of both the skeleton and pore-filling phases. The stress-void ratio responses of hydrate-bearing sediments above the pre-consolidation stress yields a slightly convex-downward trend, suggesting compressibility is influenced by the stiffness of THF hydrate and sediment grains rather than only by void space reduction. The shape of the compression index (Cc) trend may be attributed to an increasing effective gas hydrate saturation as the total pore volume decreases under loading. The results also show that the presence of THF hydrate in sediments can mitigate particle crushing by suppressing particle rearrangement and supporting a portion of the load that would otherwise have to be carried by the sediment. Therefore, the loss of hydrate crystals during gas production may exacerbate sand crushing.

Marine and Petroleum Geology↗

USGS2019

Pressure core analysis of geomechanical and fluid flow properties of seals associated with gas hydrate-bearing reservoirs in the Krishna-Godavari Basin, offshore India

Physical properties of the sediment directly overlying a gas hydrate reservoir provide important controls on the effectiveness of depressurizing that reservoir to extract methane from gas hydrate as an energy resource. The permeability of overlying sediment determines if a gas hydrate reservoir’s upper contact will provide an effective seal that enables efficient reservoir depressurization. Compressibility, stiffness and strength indicate how overlying sediment will deform as the in situ stress changes during production, providing engineering data for well designs. Assessing these properties requires minimally-disturbed sediment. India’s National Gas Hydrates Program Expedition 2 (NGHP-02) provided an opportunity to study these seal sediment properties, reducing disturbance from gas exsolution and bubble growth by collecting a pressure core from the seal sediment just above the primary gas hydrate reservoir at Site NGHP-02-08 in Area C of the Krishna-Godavari Basin. The effective stress chamber (ESC) and the direct shear chamber (DSC) devices in the suite of Pressure Core Characterization Tools (PCCTs) were used to measure permeability, compressibility, stiffness and shear strength at the in situ vertical stress. Geotechnical properties of the predominantly fine-grained seal layer at in situ vertical stress are in typical clay sediment ranges, with low measured permeability (0.02 mD), high compressibility (Cc = 0.26 – 0.33) and low shear strength (404 kPa). Though pressure and temperature were maintained throughout the collection and measurement process to stabilize gas hydrate, the lack of effective stress in the pressure core storage chamber and the chamber pressurization with methane-free water caused core expansion and gas hydrate in a thin coarser-grained layer to dissolve. The PCCTs can reapply in situ stress with incremental loading steps during a consolidation test to account for sediment compaction. Gas hydrate dissolution can be limited by storing cores just above freezing temperatures, and by using solid spacers to reduce the storage chamber’s free volume.

Marine and Petroleum Geology↗

USGS2019

Permeability anisotropy and relative permeability in sediments from the National Gas Hydrate Program Expedition 02, offshore India

Gas and water permeability through hydrate-bearing sediments essentially governs the economic feasibility of gas production from gas hydrate deposits. Characterizing a reservoir’s permeability can be difficult because even collocated permeability measurements can vary by 4-5 orders of magnitude, due partly to differences between how various testing methods inherently measure permeability in different directions and at different scales. This study uses a customized flow anisotropy cell to investigate geomechanical and hydrological properties of hydrate-bearing sediments focusing on permeability anisotropy (i.e., horizontal, kh, to vertical, kv, permeability ratio) and relative permeability. Two cores recovered during India’s National Gas Hydrate Program Expedition 02 (NGHP-02) are tested in this study. Near in situ effective vertical stress, ~ 2MPa, the permeability anisotropy is approximately kh/kv = 1.86 for the “seal core” (from a fine-grained non-reservoir overburden sedimentary section) and kh/kv = 4.24 for the gas hydrate reservoir score with tetrahydrofuran (THF) hydrate saturation Sh = 0.8. Permeability anisotropy increases exponentially with effective vertical stress, as described by kh/kv = α(σv/MPa)^β, with α = 1.6, β = 0.22 for seal sediment and α = 3, β = 0.5 for THF hydrate-bearing sediment. Results imply the measured permeability from permeameter tests with vertical flow may underestimate the reservoir’s flow performance, which is mainly horizontal (radial) toward a vertical well. Hydrates in sediment increase the gas-entry pressure and residual water saturation, but decrease the water retention curve’s shape factor (m), resulting in a steeper curve. Distributions of available pore space sizes for flow in sediment with and without THF hydrate (Sh = 0.8) follow a log-normal distribution. Hydrate formation decreases the apparent mean pore size from ~10 µm to ~2 µm, without evidently changing the pore size distribution's standard deviation. Gas hydrate dissociation increases effective permeability and relative permeability to gas.

Journal of Marine and Petroleum Geology↗

USGS2019

Pressure core based onshore laboratory analysis on mechanical properties of hydrate-bearing sediments recovered during India's National Gas Hydrate Program Expedition (NGHP) 02

A solid understanding of the mechanical properties of hydrate-bearing sediments is essential for the safe and economic development of methane hydrate as an energy resource. In 2015, 104 pressure cores were collected, recovering sediments from above and within concentrated hydrate reservoirs in the Krishna-Godavari Basin, as part of India’s National Gas Hydrate Program Expedition 02 (NGHP-02). These cores provided minimally-disturbed sediment, retained at pressures and temperatures within the hydrate stability field, for the first-ever systematic triaxial test of dozens of subsections of hydrate-bearing pressure core sediments. Post-cruise testing in Japan, evaluated multiple physical and hydro-mechanical properties. Consolidated drained and undrained triaxial compression tests, uniaxial (unconfined in effective stress) compression tests, multistage consolidation and compression tests, and alternating strain-rate compression tests were also performed. Triaxial compression test results showed an increase in the strength and stiffness, as well as the positive dilatancy, with increasing hydrate saturation, supporting previous research on laboratory-formed and natural hydrate-bearing sediments. However, some strength results in this study were low compared to prior analyses of hydrate-bearing sediments. This low strength was likely caused by the host sediment’s small particle size and loose packing, and the relatively slow applied compression strain rate. Results from uniaxial compression and multi-step compression tests confirmed that pore-space hydrates produce an apparent cohesion in hydrate-bearing sediment. More severe strength loss in sediments during the initial loading for multistage compression was also attributable to the presence of hydrates. The applicability of this multistage compression test for determining in situ properties was not confirmed, but results do provide bounds on the in situ values. Finally, from the variable strain-rate tests, it was revealed that strength in hydrate-bearing sediment has a large strain-rate dependence.

Marine and Petroleum Geology↗

USGS2019

Physical property characteristics of gas hydrate-bearing reservoir and associated seal sediments collected during NGHP-02 in the Krishna-Godavari Basin, in the offshore of India

India’s National Gas Hydrate Program Expedition 02 (NGHP-02), was conducted to better understand geologic controls on gas hydrate occurrence and morphology, targeting potentially coarse-grained sediments near the base of the continental slope offshore eastern India. This study combines seismic, logging-while-drilling data, and a petroleum systems approach to provide a regional geologic context for the core- and grain-scale analyses. This multi-scale approach provides insight on the gas hydrate distribution, morphology and anticipated system response to depressurization-induced methane extraction. The study area, NGHP-02 Area B in the Krishna-Godavari Basin, contains a buried anticline/syncline structure that hosts fracture-filling gas hydrate in fine-grained sediment overlying coarser sediments with pore-occupying gas hydrate. Core- and grain-scale measurements show fine-grained sediment exerts a primary control on the distribution and morphology of gas hydrate in Area B. Diatoms in the fine-grained overburden cause porosity to increase with depth, reaching ~70% at the underlying reservoir contact. High porosity, combined with near-vertical faults, suggests the overlying sediment is an imperfect seal. This allows methane to escape the gas hydrate reservoir sediments and form primarily grain-displacing gas hydrate veins in the fine-grained overburden. Within the reservoir, fine-grained layers are interbedded with coarser-grained gas hydrate reservoir sands. Even in the reservoir sands, however, a soil classification study shows the fines content is high enough to control hydraulic and mechanical properties, such as permeability, compressibility and shear strength. Fluid motion during methane extraction from gas hydrates can mobilize those fines, which can then clog pore throats, limiting production rates. Pore-water freshening during gas hydrate dissociation can increase fines mobilization, particularly given the smectite identified in the fine-grained interbeds. Accounting for fines content and specific fines mineralogy throughout the gas hydrate petroleum system is important for predicting production efficiency from gas hydrate occurrences along the crest of the anticline in NGHP-02 Area B.

Marine and Petroleum Geology↗

USGS2019

National Gas Hydrate Program expedition 02: Identification of gas hydrate prospects in the Krishna-Godavari Basin, offshore India

After completing the first expedition of India's National Gas Hydrate Program (NGHP-01) in 2006, it was concluded that for the next expedition (National Gas Hydrate Program 02; NGHP-02), a new drill site review effort should focus on identifying potential deep-water offshore gas hydrate accumulations in sand dominated depositional environments. Therefore, geological and geophysical data analysis and 3D seismic data interpretation along with associated seismic modeling were carried out in three areas of the Krishna-Godavari Basin: Areas B, C, and E. Conventional petroleum exploration approaches of seismic amplitude evaluation were adapted to prospect for potential sand-rich depositional systems within the gas hydrate stability zone. Subsequently, these prospective areas were further assessed through the geological and geophysical evaluation of depositional setting, gas sources, and gas migration pathways. In Area B, prospecting focused on a large anticlinal structure with a prominent bottom-simulating reflector and several key horizons that indicated evidence for potential sand-hosted hydrate occurrences. In Area C, the prospects were distributed throughout various settings within a very large deep-water channel-levee-fan system with complex indications of potential gas hydrate occurrence in sand-prone seismic facies. In Area E, prospects were associated with high amplitude events within inferred channel-levee sequences. Based on the pre-expedition/onboard drill-site evaluation, the 22 most promising sites in the Krishna-Godavari Basin were identified and prioritized to investigate and delineate a total of 17 identified gas hydrate prospects. This paper describes the geo-scientific studies carried out prior to NGHP-02 for site identification, evaluation and prioritization. An important outcome of this study is the identification of two potentially producible gas hydrate systems inferred to host significant quantity of gas hydrate in stratigraphic-structural traps.

Journal of Marine and Petroleum Geology↗

USGS2019

India National Gas Hydrate Program Expedition-02: Operational and technical summary

The India National Gas Hydrate Program is being steered by the government of India's Ministry of Petroleum and Natural Gas (MoPNG) with participation of Directorate General of Hydrocarbons (DGH), Oil and Natural Gas Corporation Limited (ONGC), and the National Oil Companies and Research Institutes of India. The India National Gas Hydrate Program Expedition 01 (NGHP-01) established the presence of gas hydrate in the Krishna Godavari (KG) and Mahanadi Basins and in the offshore area of the Andaman Sea Basin. However, the gas hydrates discovered during NGHP-01 were mainly distributed as fracture-filling material in fine-grained clay-rich sediments. The India National Gas Hydrate Program Expedition 02 (NGHP-02) was carried out with an objective to discover gas hydrate in sand-rich sediment along the eastern offshore margin of India. ONGC planned and executed NGHP-02 on the behalf of the MoPNG. NGHP-02 started on March 3, 2015 and was completed on July 28, 2015 (total 147 days) using the Japanese scientific Drilling Vessel Chikyu (D/V Chikyu). During NGHP-02, 42 holes at 25 sites were drilled, cored, and/or surveyed with downhole logging tools. These sites were located in four areas along the eastern margin of India and formally named Area A (Mahanadi Basin, three sites), Area B (northern part of the KG-Basin, twelve sites), Area C (central part of the KG-Basin, six sites), and Area E (southern part to the KG-Basin, four sites). All 25 sites established during NGHP-02 were first drilled and logged with logging-while-drilling (LWD) tools and an additional 17 holes were then drilled and/or cored with conventional coring tools (HPCS/ESCS) or pressure coring tools (PCTB). Wireline logging was conducted in 10 holes and formation tests using a dual packer Modular Formation Dynamics Tester (MDT) tool were carried out in two holes. The onboard science team used the laboratory facilities on the D/V Chikyu to examine and analyse the physical properties, geochemistry, and sedimentology of all the cores collected during the expedition. Core samples were also analysed in additional post-expedition shore-based studies conducted in numerous domestic and international gas hydrate research laboratories. The NGHP-02 sediment cores were archived at the National Gas Hydrate Core Repository in Mumbai (India), which is associated with the ONGC Gas Hydrate Research and Technology Centre (GHRTC). The necessary data for characterizing the occurrence of gas hydrate, such as interstitial water chlorinities, core-derived gas chemistry, physical and sedimentological properties, thermal images of the recovered cores, pressure core and downhole measured logging data (LWD and/or conventional wireline log data), were obtained from most of the drill sites established during NGHP-02. Almost all the drill sites yielded evidence for the occurrence of gas hydrate; however, the inferred in situ concentration of gas hydrate varied substantially from site to site. For the most part, the interpretation of downhole logging data, core thermal images, interstitial water analyses, and pressure core images from the sites established during NGHP-02 indicate that the occurrence of concentrated gas hydrate is mostly associated with coarser grained (sand-rich) sediments. This paper presents the operational and technical summary of NGHP-02. NGHP-02 started on March 3, 2015 and was completed on July 28, 2015 (total 147 days) using the Japanese scientific Drilling Vessel Chikyu (D/V Chikyu). During NGHP-02, 42 holes at 25 sites were drilled, cored, and/or surveyed with downhole logging tools. These sites were located in four areas along the eastern margin of India and formally named Area A (Mahanadi Basin, three sites), Area B (northern part of the KG-Basin, twelve sites), Area C (central part of the KG-Basin, six sites), and Area E (southern part to the KG-Basin, four sites). All 25 sites established during NGHP-02 were first drilled and logged with logging-while-drilling (LWD) to

Journal of Marine and Petroleum Geology↗

USGS2019

Formation pressure and fluid flow measurements in marine gas hydrate reservoirs, NGHP-02 expedition, offshore India

Open Hole Modular Dynamic Testing (MDT) measurements were conducted in a gas hydrate-bearing sand-rich reservoir offshore India during the National Gas Hydrate Program 02 (NGHP-02) Expedition. The primary goal of this test was to obtain effective reservoir petrophysical properties in the presence of gas hydrates. The test plan included a series of pre-hydrate dissociation flow and build-up (shut-in) tests, and an attempt to dissociate gas hydrate in a sand-rich reservoir by depressurization to collect formation fluid samples and to further characterize in situ gas hydrate stability conditions. Schlumberger’s wireline MDT tool was used in a dual-packer configuration to isolate the formation being tested. This paper presents the results of the open hole MDT measurements that were conducted in Hole NGHP-02-23-C in Krishna-Godavari Basin at a water depth of 2553.5 m. The MDT dual packer test was conducted in 27 cm (10.63 in) diameter open hole section of the borehole within a 1-m interval isolated between two inflatable packers with the midpoint of the test interval at 2853.0 meter below rig floor (mbrf) (271.0 meter below sea floor (mbsf)). This was the first gas hydrate MDT test ever conducted in ultradeep water to characterize a gas hydrate reservoir system. Pre-hydrate dissociation testing was performed with a drawdown period (depressurization) of 20 minutes followed by a build-up (shut-in) of 20 minutes. The measured formation pressure was 4090.7 psia and the formation fluid (i.e., water) mobility was calculated at 1.98 mD/cP. During the second dissociation phase of the same test a maximum pressure drawdown of 840 psia was achieved; however, falling short of the 1120 psia drawdown required for dissociation. During the dissociation test the flow line pressure stabilized at a flowing pressure of 3250 psia which can be attributed to the relatively high mobility of the free water phase in the hydrate-bearing reservoir. Good quality formation pressure and near well bore mobility data was acquired that yielded a “high confidence” reservoir effective radial permeability-thickness product of 0.2 mD.m (or a horizontal effective permeability of 0.1 mD assuming a reservoir thicknees of 1.8 m) using pressure transient analysis (radial flow regime was achieved) despite unstable borehole conditions and complex operations in these shallow unconsolidated sedimentary sections.

Journal of Marine and Petroleum Geology↗

USGS2019

Preface: Marine gas hydrate reservoir systems along the eastern continental margin of India: Results of the National Gas Hydrate Program Expedition 02

The 2015 India National Gas Hydrate Program (NGHP) Expedition 02 was conducted to obtain new information on the occurrence of gas hydrate systems and to advance the understanding of geologic controls on the formation of gas hydrate accumulations in the offshore of India. The ultimate goal of the NGHP effort is to assess the energy resource potential of marine gas hydrates in India. The Guest Editors for this special thematic issue of the Journal of Marine and Petroleum Geology (JMPG) have worked with more than 100 scientists and engineers to prepare the 45 individual reports included in this special issue to address the operational and technical contributions of the NGHP-02 Expedition. This thematic issue on natural gas hydrates in the offshore of India is built on the foundation of five previous JMPG thematic issues that focused on the scientific results of other marine gas hydrate expeditions. These foundational contributions include: (1) the “Scientific Results of the 2005 USDOE-Chevron JIP Drilling for Methane Hydrates Objectives in the Gulf of Mexico” (Volume 25, Issue 9, November 2008), (2) the “Resource and Hazard Implications of Gas Hydrates in the Northern Gulf of Mexico: Results of the 2009 Joint Industry Project Leg II Drilling Expedition” (Volume 34, Issue 1, June 2012), (3) the “Scientific Results of the Second Gas Hydrate Drilling Expedition in the Ulleung Basin (UBGH2), East Sea of Korea” (Volume 47, November 2013), (4) “Geologic Implications of Gas Hydrates in the Offshore of India: Results of the National Gas Hydrate Program Expedition 01” (Volume 58, Part A, December 2014), and (5) “Gas Hydrate Drilling in Eastern Nankai” (Volume 66, Part 2, September 2015). The NGHP-02 Expedition was conducted from 03-March- 2015 to 28-July- 2015 off the eastern coast of India. The first two months of the expedition were dedicated to establishing 25 new research sites that featured the drilling of a dedicated downhole logging hole at each site. The next three months of the NGHP-02 Expedition were dedicated to sediment coring and other downhole measurement operations at 10 of the sites established during the expedition’s first phase. The results of downhole logging, coring and formation pressure testing operations during NGHP-02 have confirmed the presence of large, highly concentrated gas hydrate accumulations in coarse-grained, sand-rich depositional systems throughout large portions of the Krishna-Godavari Basin. Post expedition research and reporting efforts included collaborative analysis of the unprecedented number of shipboard acquired data sets and core samples obtained during NGHP-02. The presentation of the scientific results of the NGHP-02 Expedition has culminated in the publication of the NGHP Expedition 02 Scientific Results Volume, which is represented by this Special Issue of the Journal of Marine and Petroleum Geology. This Special Issue features a series of four reports that summarize the operational and scientific results of NGHP-02 Expedition that are presented in the 41 technical reports included this Special Issue. The first summary report, “India National Gas Hydrate Program Expedition 02: Operational and Technical Summary,” focuses on reviewing the tools and operational procedures for the NGHP-02 Expedition that led to the acquisition of an unprecedented amount of high-quality downhole logging and core data from numerous pore-filling, fracture-filling, and sediment-displacement type gas hydrate occurrences. The summary report titled “India National Gas Hydrate Program Expedition 02 Summary of Scientific Results: Gas Hydrate Systems Along the Eastern Continental Margin of India” documents gas hydrate occurrences discovered during the NGHP-02 Expedition and examines geologic controls on the gas hydrate systems along the Eastern Continental Margin of India.

Journal of Marine and Petroleum Geology↗

USGS2019

India National Gas Hydrate Program Expedition 02 Summary of Scientific Results: Gas hydrate systems along the eastern continental margin of India

The primary objectives of the India National Gas Hydrate Program Expedition 02 (NGHP-02) were to obtain new data on the occurrence of gas hydrate systems and to advance the understanding of the controls on the formation of gas hydrate accumulations in the offshore of India. In accordance with the ultimate overall goal of the NGHP effort to assess the energy resource potential of marine gas hydrates in India, particular focus was placed on the exploration and evaluation of gas hydrate occurrences at high saturations in sand-rich systems. NGHP-02 operations were conducted from 3-March-2015 to 28-July-2015 off the eastern coast of India and included logging while drilling (LWD) operations at 25 locations, and coring and wireline logging operations at 10 locations, in the Krishna-Godavari and Mahanadi Basins. The formation of highly concentrated gas hydrate accumulations, which are more suitable for energy extraction, requires the presence of relatively coarse-grained sediments with porosity needed to support the migration and accumulation of gas, and the nucleation of gas hydrate. The results of downhole logging, coring and formation pressure testing operations during NGHP-02 have confirmed the presence of extensive sand-rich depositional systems throughout the deepwater portions of the Krishna-Godavari and Mahanadi Basins. Two areas of Krishna-Godavari Basin, referred to as Areas B and C, contain substantial gas hydrate accumulations in sand-rich systems and therefore represent ideal candidate sites for future gas hydrate production testing. This summary and technical report includes a comprehensive synthesis of the geologic, geophysical, geochemical, and physical property data acquired during NGHP-02 as it relates to the controls on gas hydrate occurrence, particularly with regards to sand-hosted accumulations. In the Mahanadi Basin, despite the confirmation of extensive reservoir capacity, gas supply at the NGHP-02 sites was insufficient to charge the reservoirs with gas hydrates. In the Krishna-Godavari Basin, extensive reservoir systems were confirmed with sediment grain-sizes ranging from coarse-silts to gravels. These reservoirs range from fully- to partially filled with gas hydrate. The gas is determined to be from only microbial sources, and in part migrated into the reservoirs from deeper systems. The controls on gas hydrate occurrence are complex and varied; and include substantial reservoir heterogeneity and sufficient permeability throughout the reservoirs and seals that allowed pervasive fluid flow into and through the hydrate-bearing systems. These discoveries are the most significant confirmation of the exploration approach that focuses on direct detection of hydrate reservoirs supported by comprehensive petroleum systems analyses.

Journal of Marine and Petroleum Geology↗

USGS2014

Geologic implications of gas hydrates in the offshore of India: results of the National Gas Hydrate Program Expedition 01

The Indian National Gas Hydrate Program Expedition 01 (NGHP-01) is designed to study the occurrence of gas hydrate along the passive continental margin of the Indian Peninsula and in the Andaman convergent margin, with special emphasis on understanding the geologic and geochemical controls on the occurrence of gas hydrate in these two diverse settings. The NGHP-01 expedition established the presence of gas hydrates in the Krishna-Godavari and Mahanadi Basins, and the Andaman Sea. The expedition discovered in the Krishna-Godavari Basin one of the thickest gas hydrate accumulations ever documented, in the Andaman Sea one of the thickest and deepest gas hydrate stability zones in the world, and established the existence of a fully developed gas hydrate petroleum system in all three basins. The primary goal of NGHP-01 was to conduct scientific ocean drilling/coring, logging, and analytical activities to assess the geologic occurrence, regional context, and characteristics of gas hydrate deposits along the continental margins of India. This was done in order to meet the long-term goal of exploiting gas hydrate as a potential energy resource in a cost effective and safe manner. During its 113.5-day voyage, the D/V JOIDES Resolution cored and/or drilled 39 holes at 21 sites (1 site in Kerala-Konkan, 15 sites in Krishna-Godavari, 4 sites in Mahanadi, and 1 site in the Andaman deep offshore area), penetrated more than 9250 m of sedimentary section, and recovered nearly 2850 m of core. Twelve holes were logged with logging-while-drilling (LWD) tools and an additional 13 holes were wireline logged. The science team utilized extensive on-board laboratory facilities to examine and prepare preliminary reports on the physical properties, geochemistry, and sedimentology of all the data collected prior to the end of the expedition. Samples were also analyzed in additional post-expedition shore-based studies conducted in leading laboratories around the world. One of the specific objectives of this expedition was to test gas hydrate formation models and constrain model parameters, especially those that account for the formation of concentrated gas hydrate accumulations. The necessary data for characterizing the occurrence of in situ gas hydrate, such as interstitial water chlorinities, core-derived gas chemistry, physical and sedimentological properties, thermal images of the recovered cores, and downhole measured logging data (LWD and/or conventional wireline log data), were obtained from most of the drill sites established during NGHP-01. Almost all of the drill sites yielded evidence for the occurrence of gas hydrate; however, the inferred in situ concentration of gas hydrate varied substantially from site to site. For the most part, the interpretation of downhole logging data, core thermal images, interstitial water analyses, and pressure core images from the sites drilled during NGHP-01 indicate that the occurrence of concentrated gas hydrate is mostly associated with the presence of fractures in the sediments, and in some limited cases, by coarser grained (mostly sand-rich) sediments.

Marine and Petroleum Geology↗

USGS2014

Geologic implications of gas hydrates in the offshore of India: Krishna-Godavari Basin, Mahanadi Basin, Andaman Sea, Kerala-Konkan Basin

Gas hydrate resource assessments that indicate enormous global volumes of gas present within hydrate accumulations have been one of the primary driving forces behind the growing interest in gas hydrates. Gas hydrate volumetric estimates in recent years have focused on documenting the geologic parameters in the “gas hydrate petroleum system” that control the occurrence of gas hydrates in nature. The primary goals of this report are to review our present understanding of the geologic controls on the occurrence of gas hydrate in the offshore of India and to document the application of the petroleum system approach to the study of gas hydrates. National Gas Hydrate Program of India executed the National Gas Hydrate Program Expedition 01 (NGHP-01) in 2006 in four areas located on the eastern and western margins of the Indian Peninsula and in the Andaman Sea. These areas have experienced very different tectonic and depositional histories. The peninsular margins are passive continental margins resulting from a series of rifting episodes during the breakup and dispersion of Gondwanaland to form the present Indian Ocean. The Andaman Sea is bounded on its western side by a convergent margin where the Indian plate lithosphere is being subducted beneath southeast Asia. NGHP-01 drilled, logged, and/or cored 15 sites (31 holes) in the Krishna–Godavari Basin, 4 sites (5 holes) in the Mahanadi Basin, 1 site (2 holes) in the Andaman Sea, and 1 site (1 hole) in the Kerala–Konkan Basin. Holes were drilled using standard drilling methods for the purpose of logging-while-drilling and dedicated wireline logging; as well as through the use of a variety of standard coring systems and specialized pressure coring systems. NGHP-01 yielded evidence of gas hydrate from downhole log and core data obtained from all the sites in the Krishna–Godavari Basin, the Mahanadi Basin, and in the Andaman Sea. The site drilled in the Kerala–Konkan Basin during NGHP-01 did not yield any evidence of gas hydrate. Most of the downhole log-inferred gas hydrate and core-recovered gas hydrate were characterized as either fracture-filling in clay-dominated sediments or as pore-filling or grain-displacement particles disseminated in both fine- and coarse-grained sediments. Geochemical analyses of gases obtained from sediment cores recovered during NGHP-01 indicated that the gas in most all of the hydrates in the offshore of India is derived from microbial sources; only one site in the Andaman Sea exhibited limited evidence of a thermogenic gas source. The gas hydrate petroleum system concept has been used to effectively characterize the geologic controls on the occurrence of gas hydrates in the offshore of India.

Marine and Petroleum Geology↗

USGS2008

Methane hydrates

Gas hydrate is a solid, naturally occurring substance consisting predominantly of methane gas and water. Recent scientific drilling programs in Japan, Canada, the United States, Korea and India have demonstrated that gas hydrate occurs broadly and in a variety of forms in shallow sediments of the outer continental shelves and in Arctic regions. Field, laboratory and numerical modelling studies conducted to date indicate that gas can be extracted from gas hydrates with existing production technologies, particularly for those deposits in which the gas hydrate exists as pore-filling grains at high saturation in sand-rich reservoirs. A series of regional resource assessments indicate that substantial volumes of gas hydrate likely exist in sand-rich deposits. Recent field programs in Japan, Canada and in the United States have demonstrated the technical viability of methane extraction from gas-hydrate-bearing sand reservoirs and have investigated a range of potential production scenarios. At present, basic reservoir depressurisation shows the greatest promise and can be conducted using primarily standard industry equipment and procedures. Depressurisation is expected to be the foundation of future production systems; additional processes, such as thermal stimulation, mechanical stimulation and chemical injection, will likely also be integrated as dictated by local geological and other conditions. An innovative carbon dioxide and methane swapping technology is also being studied as a method to produce gas from select gas hydrate deposits. In addition, substantial additional volumes of gas hydrate have been found in dense arrays of grain-displacing veins and nodules in fine-grained, clay-dominated sediments; however, to date, no field tests, and very limited numerical modelling, have been conducted with regard to the production potential of such accumulations. Work remains to further refine: (1) the marine resource volumes within potential accumulations that can be produced through exploratory drilling programs; (2) the tools for gas hydrate detection and characterisation from remote sensing data; (3) the details of gas hydrate reservoir production behaviour through additional, well-monitored and longer duration field tests and (4) the understanding of the potential environmental impacts of gas hydrate resource development. The results of future production tests, in the context of varying market and energy supply conditions around the globe, will be the key to determine the ultimate timing and scale of the commercial production of natural gas from gas hydrates.

Book chapter↗