Temporal patterns of induced seismicity in Oklahoma revealed from multi-station template matching

Robert J. Skoumal; Michael R. Brudzinski; Brian S. Currie; Rosamiel Ries

doi:10.1007/s10950-019-09864-9

Home/Archive/USGS

USGS · 70206109

Temporal patterns of induced seismicity in Oklahoma revealed from multi-station template matching

Robert J. Skoumal·Michael R. Brudzinski·Brian S. Currie·Rosamiel Ries

View original source ↗Export metadata ↓

Abstract

Over the past decade, Oklahoma became the most seismically active region of the mid-Continental USA as a result of industry operations. However, seismic network limitations and completeness of earthquake catalogs have restricted the types of analyses that can be performed. By applying multi-station template matching on the 23,889 cataloged earthquakes in Oklahoma and Southern Kansas between late-2008 and 2016, we increased the number of detected earthquakes to 209,409 events. While the improved catalog produced an order of magnitude events than the original catalog, the frequency-magnitude distribution remains similar to the original catalog. We found that the coefficient of variation of interevent times in small spatial bins tends to spatially correlate with the location of M ≥ 4 earthquakes. The improved catalog reveals the pervasiveness of swarm-like patterns in seismicity across the entire study region. The rapid increase in seismicity rate of these swarms in 2013 coincided with a reduction in the calculated p values (power law decay rates) before and after larger events. We also used the catalog to revisit the temporal patterns in the four M ≥ 5 sequences, finding more active foreshock behavior than previously recognized and variations in aftershock behavior. When compared against poroelastic stress models for the Pawnee and Fairview sequences, the catalog shows an improved correlation with stress that accounts for variable-rate injection, supporting the conclusion that injection rate is an important contributor to seismic hazard.

Explore related subjects

Journal of Seismology Article

Source-reported bounding extent: 33.616567° to 37.002206° latitude; -103.002434° to -94.431215° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Robert J. Skoumal, Michael R. Brudzinski, Brian S. Currie, Rosamiel Ries. 2019-08-29. Temporal patterns of induced seismicity in Oklahoma revealed from multi-station template matching. https://doi.org/10.1007/s10950-019-09864-9

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Site-specific amplifications in Northwestern Turkiye: A generic approach

In this study, we derive generic site amplification functions applicable to Northwestern Türkiye and follow guidance on site classifications established by the United States National Earthquake Hazards Reduction Program (NEHRP). We employ the one-dimensional (1-D) equivalent linear ground response analysis method and focus on recordings from a select suite of free-field strong motion (SM) stations. These particular SM stations are associated with a comprehensive geotechnical site conditions dataset comprising 76 shear-wave velocity profiles. Despite their varying resolutions and depths, this diversity allows for a more representative analysis across different site conditions, enhancing the robustness of our findings. For analyses, we utilize a robust set of global ground motion records, selected from both within and outside of Türkiye, to serve as strong and weak input bedrock motions. Site amplification is determined by propagating these bedrock records through 76 site-specific Afet ve Acil Durum Yönetimi Başkanlığı (AFAD) station profiles and calculating the spectral acceleration ratio between the ground surface and the input motion. Our analyses reveal substantial disparities between the amplification functions derived from 1-D site response analyses using strong and weak input motions. These disparities are central to our analysis and inform the subsequent comparison with site amplification functions reported in the literature. We compare the generic site amplification functions derived in this study with those reported in the literature for regions with similar geological and seismic conditions to Northwestern Türkiye. For example, site amplification functions for NEHRP Site Classes C and D have been documented for Greece and the United States utilizing frequency-dependent methods such as the quarter-wavelength approximation. Our findings reveal that the generic site amplification functions derived in this study exhibit differences in peak amplitudes and predominant frequencies compared to those in the literature, reflecting regional variations in geotechnical and seismic properties. This study represents an initial effort to formulate generic site amplification functions for Türkiye, with a particular emphasis on the Northwestern region. A thorough literature review indicated no prior studies have proposed such functions specifically for this area.

Northwestern Turkiye↗

USGS2022

Introduction to the special issue of the Consortium of Organizations for Strong Motion Observation Systems (COSMOS) international guidelines for applying noninvasive geophysical techniques to characterize seismic site conditions

Knowledge about local seismic site conditions provides critical information to account for site effects that are commonly observed in strong motion recordings. Certainly, other wave propagation effects can influence these observations, which are attributable to variations in material properties of the paths traveled by the waves, as well as the characteristics of the seismic source. However, local geologic conditions, particularly, when under shear-wave excitation, are known to have a strong influence on the behavior of ground shaking in the frequency range that is expected to directly affect the built environment. Thus, shear waves traveling in the shallow subsurface—defined here as tens to hundreds of meters beneath the ground surface—are the main foci for application and research in the earthquake engineering community.

Journal of Seismology↗

USGS2022

Flexible multimethod approach for seismic site characterization

We describe the flexible multimethod seismic site characterization technique for obtaining shear-wave velocity ( V S ) profiles and derivative information, such as the time-averaged V S of the upper 30 m ( V S30 ). Simply stated, the multimethod approach relies on the application of multiple independent noninvasive site characterization acquisition and analysis techniques utilized in a flexible field-based approach through a decision process based on primary factors such as the investigator’s available equipment, field logistics (e.g., available array deployment space, urban versus rural), geologic setting, and funding among other primary factors. In a multimethod approach, sites ideally should be characterized using both active and passive noninvasive (i.e., no drilling and only minimal disturbance to the ground surface) methods. Almost without exception, we recommend the use of at least one active-source technique for analyzing surface waves, which in the current state of practice would include one or more of the following: spectral analysis of surface waves (SASW; commonly Rayleigh waves) and multichannel analysis of surface waves (MASW; Rayleigh and/or Love waves). In addition, passive-source microtremor array methods (MAMs) using linear (one-dimensional) and two-dimensional arrays may be appropriate or even required for characterizing a given site. Similarly, the microtremor horizontal-to-vertical spectral ratio (mHVSR) method can be valuable for identifying shallow rock sites. Finally, P- and SH-wave seismic refraction methods warrant consideration, especially at rock and shallow-rock sites.

Journal of Seismology↗