Tracking phosphorus and sediment sources and transport from fields and channels in Great Lakes Restoration Initiative priority watersheds

Tanja N. Williamson; Faith A. Fitzpatrick; Diana L. Karwan; Randall K. Kolka; Edward G. Dobrowolski; James D. Blount; Ethan D. Pawlowski

USGS · 70204724

Tracking phosphorus and sediment sources and transport from fields and channels in Great Lakes Restoration Initiative priority watersheds

Tanja N. Williamson·Faith A. Fitzpatrick·Diana L. Karwan·Randall K. Kolka·Edward G. Dobrowolski·James D. Blount·Ethan D. Pawlowski

View original source ↗Export metadata ↓

Abstract

A multi-agency, integrated series of studies were initiated in 2017 under the Great Lakes Restoration Initiative (GLRI) by the U.S. Geological Survey, U.S. Forest Service, and the University of Minnesota to quantify the source, downstream travel time, and storage of particulate-bound phosphorus and sediment in agricultural tributaries to the Great Lakes. Of particular interest are contributions at the edge of field, channels, and riparian corridors. Results will be used to help identify upland and stream conservation practices that may reduce phosphorus and sediment inputs to the Great Lakes. The two study watersheds are the 50 km2 Black Creek in the Maumee River basin (Lake Erie) and the 90 km2 Plum Creek in the Lower Fox River basin (Lake Michigan). As part of other GLRI work, Black Creek and Plum Creek have existing, nested, edge-of-field studies in addition to phosphorus and sediment monitoring stations along their mainstems. Sediment-source tracking provides a direct method to quantify suspended sediment, and consequently phosphorus, sources by identifying a minimal set of properties (or fingerprint) that uniquely defines each source of sediment in the basin. This fingerprint can then be used to apportion sources of sediment from agricultural fields as well as other uplands including developed areas, forests, and pastures. These methods can also help distinguish sediment from ditches, ravines and eroding slopes, and streambanks. Multiple tracking methods are being used and adapted for best results in these watersheds, including a suite of trace elements for overall source apportionment in addition to short-term fallout radionuclides beryllium-7 (7Be) and lead-210 (210Pb) for high-flow event-based transport on fields and in stream channels. Tile drain connectivity to the surface is also of interest, especially in the Black Creek watershed. Preliminary results from the overall source apportionment from analyses of streambed sediment and monthly suspended sediment in Plum Creek indicate that the proportion attributed to different land cover varied by season and events. Further data analyses are being conducted for examining event-based pathways on individual fields, while most basin-wide sampling was monthly. Results from both watersheds will help describe the variations in transport of particulate-bound phosphorus across both steep and gentle landscapes representative of the Great Lakes basin. (this is from IP-101450)

Explore related subjects

Conference Paper

Source-reported bounding extent: 41.11246878918088° to 48.86471476180277° latitude; -92.46093749999999° to -75.5859375° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Tanja N. Williamson, Faith A. Fitzpatrick, Diana L. Karwan, Randall K. Kolka, Edward G. Dobrowolski, James D. Blount, Ethan D. Pawlowski. 2019. Tracking phosphorus and sediment sources and transport from fields and channels in Great Lakes Restoration Initiative priority watersheds. https://pubs.usgs.gov/publication/70204724

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Authoritative knowledge infrastructure for GeoAI: Implications for scientific spatial data providers

Geospatial Artificial Intelligence (GeoAI) increasingly relies on automated analysis of authoritative geospatial data, exposing limitations in data infrastructures originally designed for simple dissemination rather than for knowledge-driven use. From the perspective of scientific spatial data providers, the challenge is enabling GeoAI responsibly while retaining semantic clarity, provenance, reproducibility, and governance. This short paper (i) examines how GeoAI exposed limitations within existing geospatial data infrastructures, and (ii) identifies provider-side requirements for an authoritative knowledge infrastructure. Drawing on GIScience, scientific workflow, and operational AI literature, the paper outlines implications for national mapping organizations that seek to support advanced analytics without jeopardizing scientific rigor or stewardship responsibilities.

Conference Paper↗

USGS2026

Springs of the Catskill Mountains: A conduit flow system in predominantly siliciclastic strata

The Catskill Mountains of New York state are composed of thick sequences of interbedded mudstone, sandstone, and siltstone that are intercalated with thin beds of paludal limestone and calcareous mudstone. Sandstones often contain rip-up clasts of calcareous material at their bases and contain minor amounts of carbonate cement throughout their mass. This minor amount of calcareous material weathers out to produce thin zones of solutional porosity and permeability integrated within perched aquifers that feed perennial hillslope springs. Solutional features are evident within thin carbonate lenses and along fractures in sandstones, occasionally resulting in explorable cave-sized conduits. This study focuses on the behavior of bedrock springs and seeps in the headwaters of the Neversink River basin above the Neversink Reservoir. Bedrock springs are numerous throughout the Catskill Mountains and serve to provide baseflow to the headwater streams that tends to be more persistent during dry times than other baseflow sources. We observed dissolution-influenced conduits within the bedrock, and suffosional conduits within unconsolidated materials. Continuous water temperature at six springs was monitored at hourly intervals from May to October 2022 to investigate the thermal response of groundwater to daily and seasonal changes in air temperature along with event-based meteorological events. Temperature monitoring was augmented at some springs with time-lapse photography to evaluate persistence of flow. The thermal responses of springs to precipitation events were highly variable across sites, with some springs exhibiting flashy responses indicating a strong connection to the surface, while other springs showed muted or no thermal response to events. The seasonal thermal response also varied across sites having lag times of 23-48 days between peak air temperature and peak spring water temperature. The water temperatures and geochemical compositions of these bedrock springs support a conceptual model of multiple residence times, showing both event and seasonal groundwater storage within the conduit flow system that feeds the springs of the Catskill Mountains.

New York↗

USGS2026

Stability changes after weak layer collapse: Insights from an unexpected dataset

While conducting avalanche mitigation or traveling through the backcountry, avalanche professionals sometimes experience a "whumpf": a collapse-mode crack accompanied by surface cracking that does not produce an avalanche. These whumpfs are a clear warning sign of instability in the surrounding terrain. But assessing the collapsed slope itself, if it is steep enough to avalanche, carries much more uncertainty. Can slopes that whumpf and are steep enough to slide still avalanche? The answer to this question supports avalanche mitigators and ski guides in assessing whether to open such slopes. Previous research on collapsed slopes is limited to one study conducted before tests that estimate crack propagation propensity, such as the Propagation Saw Test (PST), were developed. This work showed that weak layer shear strength decreased immediately after collapsing and then increased over time. However, no research has examined crack propagation propensity after a whumpf. Studying propagation propensity is key for assessing how whumpfs immediately affect slope stability. To improve our understanding of changes in propagation propensity following weak layer collapse, we conducted PSTs on a test slope in the hours and days after an unexpected collapse occurred on a layer of surface hoar. Two PSTs at our study site three days prior to this collapse provided an estimate of weak layer propagation propensity. PST cut lengths decreased immediately following the collapse, suggesting that the collapse increased the propagation propensity. However, over the next 4-5 hours, PST cut lengths steadily increased at our site, likely due to ongoing sintering and strengthening in the collapsed weak layer. By the end of day two, we were no longer able to initiate propagation, suggesting substantial stabilization of the weak layer. Our results support prior findings and observations suggesting that slopes may remain capable of producing avalanches immediately after a collapse but likely stabilize over the next day or two. Although this research does not provide answers about precisely when a slope becomes stable after a collapse, it does highlight uncertainties in our understanding and interpretation of the stability of slopes that have whumped.

Montana↗