Geology Reports⌕ Search

Geology topics

Faith A. Fitzpatrick

Publications and source records attributed to Faith A. Fitzpatrick.

At least 19 recordsLinked to original sources

Development of a two-dimensional hydraulic model for the Kalamazoo River between the Trowbridge and Allegan City Dams, Michigan

The U.S. Geological Survey developed a two-dimensional hydraulic model for a 9.2-mile reach of the Kalamazoo River between the Trowbridge and Allegan City Dams. The model simulates streamflow conditions with spatial coverage and resolution that would be difficult or dangerous to document with field measurements, enabling assessments of habitat connectivity and substrate stability to support dam removal and restoration planning. The model was calibrated with surveyed water surface elevation (WSE) profiles, streamgage WSE time series, and measured depth-average velocities. Modeled WSE profiles had root mean square error (RMSE) values of 0.20 and 0.32 foot. Cross-sectional average velocities were slightly underpredicted, with RMSE of 0.28 and 0.30 foot per second (ft/s). Channel roughness varied with stage, and the high-flow model reproduced streamgage WSE time series with an RMSE of 0.04 foot. Quasi-steady simulations at 4,000 cubic feet per second (ft 3 /s), about the 50-percent annual exceedance probability streamflow, indicated that cross-sectional average velocities within 3.4 miles downstream from Trowbridge Dam were commonly between 3 and 4 ft/s, occasionally exceeding 4 ft/s. Farther downstream, velocities seldom exceeded 3 ft/s. Simulated shear stresses were used to estimate substrate stability in the reach. At 4,000 ft 3 /s, the minimum stable grain size along most of the main channel was predicted to be in the pebble range (4–64 millimeters), and sands and silts were predicted to be stable in the floodplain and backwaters.

Michigan↗

Sources and streambed storage of soft sediment and sediment-bound phosphorus in an agricultural Great Lakes tributary

The East River, an agricultural tributary to the Lower Fox River and Lake Michigan in Wisconsin, USA, has excessive phosphorus (P) and suspended-sediment loads that contribute to downstream eutrophication and habitat-related impairments. Spatial variations and connectivity in the sources and streambed storage of soft, fine-grained (silt and clay) sediment and related sediment-bound P (sed-P) were examined, from first-order ephemeral channels to a downstream water-monitoring station. Analysis included field inventories, a channel corridor sediment and sed-P budget applied to an extended channel network, and geochemical fingerprinting. Corridor inventories included mass wasting along valley sides, eroding streambanks, gullying along perennial and ephemeral channels, and streambed storage volumes in perennial reaches; each converted to masses. Erosion results estimate 7400 Mg/yr of fine-grained sediment, similar to the mean annual suspended sediment load of 5400 Mg/yr. Corridor erosion contributed 7200 kg/yr of sed-P, less than the mean annual particulate-P load of 10,000 kg/yr P. Soft sediment storage was 1400 Mg, with 1500 kg sed-P. Apportionment of soft sediment as streambank sourced was spatially variable, contributing ≥95 % in high order reaches with high storage and as little as 20 % in upstream reaches, where gully, crop, and forest provided the remainder. Two nearby tributaries showed similarity in the predominance of streambank-sourced material in stored soft sediment but differences in geomorphic setting affected its spatial distribution. The results of this study show the importance of including corridor erosion as a source of sediment and sed-P in agricultural basins, which can be helpful in decision-making regarding conservation practices.

Wisconsin↗

FluOil—A tool for estimating the transport and deposition of oil-particle aggregates in rivers

The FluOil tool was developed to help with planning and early response for oil spills in rivers where subsurface oil-sediment interactions result in the formation of oil-particle aggregates (OPA). The turbulence and variable velocity associated with water flowing within a natural stream channel creates the conditions needed for an oil slick to break up into small droplets and mix in the water column, collide with sediment or organic detritus, and form OPA. This process is similar to what occurs due to wave action along a shoreline. The FluOil tool estimates how fast OPA travel downstream in rivers as well as when and where they may deposit. The FluOil tool relies on pre-existing channel hydraulic data along with user-specified OPA characteristics of size, settling velocity and critical shear stress to compute OPA transport. It is important to know where OPA are transported and accumulated for understanding potential impacts on drinking water intakes, burial of sensitive habitat beds, potential toxicity to benthic organisms, and prolonged sheening from resuspension and breakup. OPA tend to accumulate with fine-grained (silt and clay) sediment deposits (“mud” or “muck”) in backwater areas, oxbows, side channels, pools, and other slow-moving reaches of rivers during low flows. Deposited OPA can be resuspended during high flows, driving continued environmental impact concerns that may extend beyond typical oil spill response timelines.

Fact Sheet↗

Evaluating uncertainties with sample-collection method and source selection in sediment fingerprinting: an example from a Great Lakes tributary

Purpose Identifying suspended-sediment (SS) sources, seasonal variability, and phosphorus (P) transported with SS is critical information for basin managers, although there may be concerns about comparability between flow-integrated SS samples used for sediment fingerprinting and discrete samples used for concentrations and loads in basins where SS is mostly silt + clay and(or) one land-use predominates. Objectives were to determine if (1) sample-collection method and (2) source consideration influenced apportionment of the largest SS source. Methods Concurrent-replicate, SS samples were collected during 2022 from the East River, Wisconsin using an automated sampler, commonly used for water-quality sampling, and passive samplers, frequently used for SS fingerprinting. Samples were evaluated for differences in physical and chemical characteristics that may affect source apportionment. Considered sources included three upland land-use (cropland, forest, and roads), two in-channel (streambank and streambed sediment), and one that connects uplands to the stream channel (gullies). Source apportionment used established methods in the SedSAT tool. Source scenarios included land-use + streambank (4src), 4src + gully, 4src + streambed, and 4src + gully + streambed (6src). Results There were no statistically significant differences in median grain size, organic carbon, or sediment-bound P as a function of collection method. In-channel sources were the largest proportional SS source, regardless of season, hydrologic condition, collection method, or source scenario. Source verification highlighted which source fingerprints were most accurately defined and implications for SS target apportionment. Conclusion Varying the source scenarios for sediment fingerprinting indicated that improved management of hydrologic connectivity between upland land use and the stream channel has the potential to mitigate SS loads.

Wisconsin↗

Changing dynamic phosphorus forms from field to stream during surface runoff events

The risk of water quality impairment from agricultural runoff depends on nutrient source, transport, and bioavailability. Phosphorus (P) spirals between dissolved and particulate forms as it is transported with suspended sediment (SS) from agricultural fields, through the stream network, to receiving water bodies. This dynamic sorption-desorption influences bioavailability. We quantified P form and abundance in samples collected during surface-runoff events from a farm field in the East River Basin, Wisconsin and compared them to those in stream water collected from the East River. We sampled five events between late March 2022 and June 2023. During most events, P in surface runoff was mainly in dissolved form, with particulate P sorbed to fine clay, the most abundant particle fraction transported from the field, whereas P in stream water was mainly in particulate form and sorbed to silt, even though fine clay was the most abundant particle fraction in the stream during events. Overall capacity for P sorption to SS in the stream varied among events. Total P and SS concentrations were lower during summer baseflow conditions and smaller surface runoff events; however, what SS was present was more P enriched. This shift in P form from field to stream indicates a potential for sorbing dissolved P to SS during transport through the stream network, which changes the bioavailability of P exported downstream with less bioavailable P as dissolved P binds to SS.

Wisconsin↗

Geomorphic habitat response units for urban stream rehabilitation, Milwaukee, Wisconsin

Urban stream rehabilitation plans can benefit from knowledge of the landscape setting and vegetative communities that were adjacent to streams prior to urbanization. Downstream to upstream connections of these characteristics can be relevant for native migratory fish species that have a range of preferred spawning habitats. Based on a need for more quantitative data on these potential connections, the U.S. Geological Survey assembled geomorphic characteristics, surficial geology, and pre-Euro-American settlement vegetation for 333 kilometers of stream segments in the Kinnickinnic River and Menomonee River subbasins of the Milwaukee River, Wisconsin. Channel slopes ranged from less than 0.3 percent to greater than 2 percent, covering at least two channel morphology and bedform types spanning low-energy irregular and pool-riffle complexes. Postglacial surficial geology ranged from coarse-grained outwash sand and gravel to lacustrine silt and clay, allowing for a range of stream substrate sizes. Presettlement riparian vegetation was mainly forest, including forested uplands, forested lowlands, and to a lesser extent, conifer-dominated wetlands in headwaters. This resulting framework of geomorphic habitat response units can be used for habitat rehabilitation projects for migratory native fish in other urban Great Lakes tributaries.

Wisconsin↗

Sediment nutrient dynamics in selected Milwaukee metropolitan area streams, Wisconsin, 2022

The U.S. Geological Survey and Milwaukee Metropolitan Sewerage District in Wisconsin have an ongoing partnership to monitor water quality in streams in the Milwaukee metropolitan area and to assess the effects of stream restoration on habitat and water quality. Because sediment nutrient dynamics can improve or further impair water quality, we measured sediment nitrogen and phosphorus concentrations, potential nitrogen removal, and potential phosphorus retention at 32 streams sites in the Milwaukee metropolitan area in summer 2022. Four of the sites were in rehabilitated stream reaches. Based on the results from this project, we provided a rating of good, fair, or poor for the sediment nutrient dynamics at each site. Sediment nitrogen removal and phosphorus retention in stream reaches increased as the proportion of fine particles increased. Bioavailable nitrogen and phosphorus concentrations increased in stream reaches as particle size decreased, especially at locations with more silt and clay. Particle size typically decreased from upstream to downstream, and several of the sites with finer particles were in downstream parts of the study area, especially in the Milwaukee Estuary sites. The sites that had more fine sediment and higher bioavailable nutrients also had elevated rates of nitrification and denitrification enzyme activity, which is a measurement of the potential nitrogen removal when nitrogen and carbon do not limit the denitrifying bacteria. Additionally, sites with fine sediment typically had the highest potential to retain phosphorus as fine sediment provides many binding sites for phosphorus. The binding sites can become saturated with phosphorus, however, increasing the potential for the phosphorus to be released to stream water. Five of the 32 sampled sites were potentially saturated with phosphorus. Sites that contained more agricultural land in their drainage areas were at higher risk of having sediment that was saturated or near-saturation; however, the sites that had more agricultural land in their drainage areas also had higher nitrification rates. Results from this study indicate that stream rehabilitation projects that promote sediment deposition and accumulation of organic matter in the stream channel can increase nitrogen removal and phosphorus retention.

Wisconsin↗

Hydrogeomorphic history, hydrodynamic conditions, and simulations of water levels and velocities from varying lake levels and streamflow for the Sheboygan Rivermouth and area of concern, Wisconsin

In 2011–13, the U.S. Geological Survey (USGS) conducted a study of the hydrogeomorphic setting and hydrodynamic conditions of the lower Sheboygan River and island complex within the backwater zone of Lake Michigan. Analyses of historical aerial photographs from 1938–2010 indicated that the Wildwood Islands complex had experienced mainly erosion and what was mainly one island in 1938 had eroded into about ten smaller islands and bars by 2010. Water levels, velocity and sedimentation patterns in the Sheboygan River mouth are affected by Lake Michigan water levels and seiche-related flow reversals for a potential river length of over 7 km. During the summer of 2012, when water levels in Lake Michigan were below the low water datum, seiche-related water-level fluctuations had a general range of 0.2 m and extended to just upstream of the Wildwood Islands complex, with greater variability in amplitude and frequency in the spring and fall months than in the summer. The low water level associated with the trough of a 60-90-minute seiche-related oscillation was sometimes 0.6 m lower than the low water datum. Runoff events produced river water levels during spring melt or storms that were 0.6 m above coincident Lake Michigan water levels. Frequent ice jams in the winter and early spring of 2012-13 raised river water levels to near the Lake Michigan ordinary high-water mark even though Lake Michigan water levels were at near record lows. Results from trends analyses from 1916 through 2008 indicated average annual streamflow and low flows were increasing in the Sheboygan River, but floods with an annual exceedance probability of 1 percent did not change. Simulations of a range of combinations of Lake Michigan water levels with river flows indicated that a variety of velocity patterns and water levels are possible near the Wildwood Islands complex. Simulated velocities ranged from 0 m/s during high lake levels and small river flows to 2 m/s during high lake levels and floods with an annual exceedance probability of 0.01. Silt deposition recorded in sediment cores matched locations of flow divergence in the model simulations. Time lapse photography confirmed flow reversals in the vicinity of the Wildwood Islands complex from frequent seiche oscillations. The study illustrates the large range in variability in water levels and velocities over short periods of time, and that the lake-effect zone can be greatly extended upstream during high lake levels for low-gradient rivermouth environments.

Wisconsin↗

Effects of river floods and sedimentation on a naturally dynamic Great Lakes estuary

Some of the most biologically diverse coastal wetlands and estuaries are found along the Great Lakes, but the spatial extent and timing of river-related inundation and sedimentation vary greatly among natural and altered systems. We used hydrologic data, geomorphic change detection, and satellite imagery to study inundation and sedimentation patterns in the naturally dynamic estuary of the Bad River ( Mashkiiziibii ) that flows into Lake Superior ( Anishinaabeg-gichigami ), and the Kakagon River ( Ogaakaagaang-ziibii ) that flows into a sheltered bay ( Chi-Kaamigong ). In 2016, an extreme summer flood (annual exceedance probability < 0.2 %) caused total inundation of the 46-km 2 estuary. Floods from the sediment-rich Bad River, with an annual exceedance probability of ≤ 50 %, have overflowed into the upper wetlands and channels of the Kakagon River about 60 times over the last 75 years, including 20 floods during the most recent 10-year wet period. Sedimentation patterns were associated with proximity to river channels, shoreline erosion, and wind action. Early winter ice-up coupled with a storm surge and an early spring snowmelt into the iced-over bay changed inundation duration and sedimentation patterns. Climate-change projections for more intense rainfall and warmer temperatures will likely cause more frequent flooding and sedimentation; however, patterns may differ depending on the timing of the floods relative to storm surges and ice formation, or other factors. The approach of integrating readily available data helped give a broader temporal and spatial context to the possible causes for inundation and sedimentation, some expected and others not, in natural and restored estuaries of the Great Lakes.

Wisconsin↗

Mapping potential sensitivity to hydrogeomorphic change in the UMRS riverscape

In 2020 the U.S. Geological Survey (USGS), as part of the Upper Mississippi River Restoration (UMRR) Program, began a new project to characterize potential hydrogeomorphic change associated with hydrogeomorphic units (HGUs) and their catenae (units linked by their association with sediment sources and flow origins). The goal of the project was to develop a geographic information system (GIS) database of HGUs for the Upper Mississippi River System (UMRS) available to both scientists and river managers working on UMRR studies and HREP planning and design studies. The characterization was based on a hydrogeomorphic change hierarchical classification developed previously for the UMRS. The products were generated with automated techniques in a GIS using systemic datasets. Landforms were mapped from the 2015 UMRS topobathymetric dataset with geomorphon (shape-based) tools tailored for the large riverscape, valley bottom environments in the UMRS. A clustering analysis was applied to the resulting landforms to identify HGUs associated with zones of perennial low flows, bankfull flows, and overbank floodplains. Catenae were assembled based on the proximity of the units to the main channel, tributary mouths, and side channels from previously published aquatic areas (USACE, 2018) coupled with least-cost flowpath linkages between potential sediment origins and planform change units developed by Rogala, Fitzpatrick, and Henderson (2020). These GIS-based analyses were successful at identifying a range of HGUs using an automated technique with available data across the entire riverscape, with emphasis on those that have the potential for hydrogeomorphic change. Most of the resulting features are depositional, as expected in a large river system. However, this is the first attempt of linking tributary inputs, side channel erosion and levee breaches with their depositional counterparts. The approach was successfully piloted in Pools 8 and 10 in the Upper Impounded Reach and Pool 14 in the Lower Impounded Reach, with next steps for application in reaches of the unimpounded section and Illinois River. This report emphasizes results from Pool 10, which was the focus of most of our attention during the pilot phase.

Illinois, Indiana, Iowa, Minnesota, Missouri, Sout↗

Upper Mississippi River System hydrogeomorphic change conceptual model and hierarchical classification

Understanding the geomorphic processes and causes for long-term hydrogeomorphic changes along the Upper Mississippi River System (UMRS) is necessary for scientific studies ranging from habitat needs assessments, sediment transport, and nutrient processing, and making sound management decisions and prioritizing ecological restoration activities. From 2018 through 2020 the U.S. Geological Survey and U.S. Army Corps of Engineers led a series of calls and meetings, and a workshop to develop a draft UMRS hydrogeomorphic change conceptual model and hierarchical classification scheme. This project was funded through an Upper Mississippi River Restoration 2018 science in support of restoration proposal entitled, “Conceptual Model and Hierarchical Classification of Hydrogeomorphic Settings in the Upper Mississippi River System.” This report documents the background leading up to and the major findings from the workshop. The resulting conceptual model focuses on the drivers and boundary conditions that affect the major hydrogeomorphic processes along the valley corridor using a continuum of spatial and temporal scales and resolutions. The draft hierarchical classification was based on three existing and three new nested geospatial datasets that ultimately can be used to characterize hydrogeomorphic settings that span the UMRS valley corridor. The conceptual model and hierarchical classification will help characterize recent (mid-1990s through mid-2010s) decadal-scale processes and sources for potential hydrogeomorphic change that span a range of spatial scales from watershed hydrology and sediment sources to channel hydraulics and sediment transport.

Illinois, Indiana, Iowa, Minnesota, Missouri, Sout↗

Building a library of source samples for sediment fingerprinting – Potential and proof of concept

Purpose Sediment fingerprinting of fluvial targets has proven useful to guide conservation management and prioritize sediment sources for Federal and State supported programs in the United States. However, the collection and analysis of source samples can make these studies unaffordable, especially when needed for multiple drainage basins. We investigate the potential use of source samples from a basin with similar physiography (using samples from one of a “pair” to evaluate samples from the other) or combined from multiple basins (a “library”). Methods Source samples from eight basins across six ecoregions were harvested from existing, published studies. Individual source samples were fingerprinted using a mixing model derived from source samples from other basins. The ability to identify source category was evaluated both as part of source verification and by classifying source samples as “targets.” Results Approximately half of cropland samples were identified as targets, both as pairs and with the multi-basin source dataset, indicating that cropland samples could be shared for basins in similar ecoregions and be combined for larger stream systems. Streambank samples were better identified with the multi-basin analysis relative to the pairs, and those from mixed land-use basins improved this differentiation except for samples from basins with a dominant land-use type. Inconsistent identification of pasture samples highlighted the need for local samples. Inconsistent identification of forest samples indicated that upland- and riparian-forest samples are distinct. Road samples were identified as both sources and targets, and other source types were rarely apportioned as road: these may have the best potential to supplement local source samples. This source-sample library was then used to improve the accuracy of sediment-source apportionment for a previously studied basin. Conclusion Ultimately, the source verification process already used in individual basin studies to evaluate the accuracy of sediment-fingerprinting apportionments was useful for determining how to supplement local source samples with those from other basins. This study shows that supplementing local source samples with those from basins with similar physiography has the potential to both improve fingerprinting accuracy and decrease the cost of this type of study.

Journal of Environmental Management↗

Stream corridor sources of suspended sediment and sediment-bound phosphorus from an urban tributary to the Great Lakes

Potential sources of suspended sediment and sediment-bound phosphorus (sedP) were studied in the Kinnickinnic River (51 square kilometers), a heavily urbanized tributary to Lake Michigan (90% urban land use) in Milwaukee, Wisconsin. The river is 60% concrete lined channels, with few unlined reaches. From September 2019 through August 2020, an integrated study of sediment budget and sediment fingerprinting was conducted to quantify upland and stream corridor sources of suspended sediment and sedP using Sediment Source Assessment Tool (SedSAT) methods with a suite of trace elements. Passive suspended sediment samplers were installed at three sites. Soft, fine-grained streambed sediment was collected at 10 rapid geomorphic assessment (RGA) sites. An inventory of bank erosion and soft-sediment deposition was done at each of the 18 RGA sites, which were selected to represent a range of stream sizes and geomorphic conditions. Sources of suspended sediment varied with streamflow; the primary source was from roadways in residential areas followed by eroding streambanks. Industrial/commercial areas contributed 1% of the suspended sediment at the streamgage during the study period, whereas green space contributed 18% of the suspended sediment at a mid-basin monitoring location downstream of an unlined reach. The dominant sources of streambed sediment, like suspended sediment, throughout the basin were eroding banks and residential areas, with green space and industrial/commercial area signatures present locally. In contrast with previous studies in agricultural and mixed-use basins, the urban Kinnickinnic River had limited storage of soft sediment, due to the hydrologically flashy system and concrete lined channels. However, eroding streambank sources contribute 50% of the streambed sediment, but only 9% of suspended sediment within this tributary to the Great Lakes.

Wisconsin↗

Connecting flood-related fluvial erosion and deposition with vulnerable downstream road-stream crossings

Fluvial erosion is increasingly responsible for infrastructure and building damages associated with floods as the intensity of extreme rainfalls hit rural and urban rivers in a variety of climate settings across the United States. Extreme floods in 2016 and 2018 caused widespread culvert blockages and road failures, including extensive damage along steep tributaries and ravines in the Marengo River, Wisconsin, watershed during 2016 and 2018. A study conducted by the U.S. Geological Survey (USGS), Wisconsin Wetlands Association (WWA), Ashland County, and the Northwest Wisconsin Regional Planning Commission (NWRPC) investigated the special concern of fluvial erosion hazards (FEHs) associated with gullying, streamside landslides, and the loss of wetland storage in headwaters. In 2019, a pilot study was begun to map and classify ephemeral and perennial streams and wetlands in terms of their sensitivity to FEHs. This study combined data from field-based rapid geomorphic assessments (RGAs) coupled with a stream network-wide geographic information system (GIS) approach for mapping stream segments, referred to as fluvial process zones (FPZ), sensitive to erosion, deposition, and channel change. The GIS approach used nationally available 10-meter (m) resolution topology and an extended stream network to map FPZs based on Strahler stream order, stream power, channel slope, presence of adjacent steep valley sides and headwater flats, and adjacent landform setting. Bankfull channel widths derived from RGA-based hydraulic geometry curves combined with drainage areas, an estimate of bankfull flow, and channel slope were used to calculate specific stream power for the FPZs. Lastly, the FPZs were characterized by their location within three major landform settings that affect erosion potential. The resulting vulnerability maps provided a screening framework to identify FPZs that are sensitive to incision, gullying and mass wasting along steep headwater ephemeral channels, as well as downstream perennial channels that have the potential for valley-side landslides, coarse sediment deposition, and channel change. Lastly, each FPZ was characterized in terms of hydrologic alteration associated with ditching. The vulnerability mapping products and rankings of sensitivity of FPZs will ultimately be used by Ashland County and their collaborators to prioritize natural flood management projects that mitigate FEHs, restore hydrology, and reconnect channels with adjacent wetlands and floodplains.

Wisconsin↗

FluOil: A novel tool for modeling the transport of oil-particle aggregates in inland waterways

Spilled oil in inland waterways can aggregate with mineral and organic particles to form oil-particle aggregates (OPAs). OPAs can be transported in suspension or deposited to the bed. Modeling the fate and transport of OPAs can provide useful information for making mitigation decisions. A novel open-source tool, FluOil, is developed to predict where OPAs may deposit and when they arrive in affected river/lake reaches by implementing the random walk particle tracking algorithm to represent the advection, diffusion, deposition, and resuspension of OPAs. The usability of FluOil is demonstrated with the 2010 Kalamazoo River oil spill case study. An unsteady hydrodynamic model simulates the river hydraulics and provides hydraulic data for use in FluOil. Settling velocity and critical shear stress for resuspension are the most important OPA properties concerning the transport and deposition of OPAs. Settling velocity determines the vertical distribution of OPAs and, thus, the travel speed, whereas critical shear stress determines where and when OPAs are deposited and resuspended.

Michigan↗

Geomorphic responses of fluvial systems to climate change: A habitat perspective

Fluvial systems provide a variety of habitats that support thousands of species including many that are threatened or endangered. Moreover, these habitats, which range from aquatic and riparian to floodplain, are important for the variety of ecosystem services they provide. In addition to water temperature and streamflow change, geomorphic change is important and warrants consideration as one of the several potential threats to these habitats posed by climate change. The geomorphic response of fluvial systems to global warming in temperate environments, for example, caused by an increase in the frequency and magnitude of floods, is important because geomorphology is a primary determinant of habitat availability and quality. Possible geomorphic responses include increased erosion and (or) deposition in the river channel, riparian zone, and floodplain with associated habitat implications. Geomorphic changes caused by global warming can be beneficial (e.g., increased habitat complexity) or detrimental (e.g., mortality caused by scour or burial) to biota. The ability of a species to respond to and survive disturbances, including geomorphic changes, will depend on the nature of the disturbances and the sensitivity and adaptive capabilities of the species. Post-flood recovery often is rapid; however, for certain species (e.g., periphyton, macroinvertebrates), changes in community composition may persist. Increased flood frequency, sediment mobility, and associated geomorphic changes potentially will result in more frequent and persistent changes in habitat and community composition in the affected fluvial systems.

River Research and Applications↗

The use of continuous sediment-transport measurements to improve sand-load estimates in a large sand-bedded river: The Lower Chippewa River, WI

Accurately determining sediment loads is necessary for managing river environments but is difficult because multiple processes can lead to large discharge-independent changes in sediment transport. Thus, estimations of sediment load using discharge–sediment rating curves fit to sparse or historical sediment-transport measurements can be inaccurate, necessitating alternative approaches to reduce uncertainty. Continuous sediment-transport measurements reduce uncertainty because they can be used to detect discharge-independent changes in transport and are therefore unaffected by hysteresis. We used largely continuous approaches to measure sand transport in the lower Chippewa River, a large sand-supplying tributary to the Mississippi River. We used side-looking acoustic-Doppler profilers to continuously measure suspended-sand concentration, and bedform-tracking techniques to episodically measure bedload transport. Bedload transport was then continuously estimated using a discharge-dependent ratio of bedload to suspended-sand transport. This approach allowed determination of sand loads that were not estimated based only on water discharge. Our continuous suspended-sand measurements show that hysteresis between discharge and suspended-sand concentration occurs during most floods. Quasi-continuous bed-elevation measurements using a scour monitor show that lags between discharge and dune geometric adjustment is also common, causing hysteresis between discharge and bedload transport during floods. Furthermore, comparisons of our measurements with historical sediment-transport measurements indicate large discharge-independent declines in both suspended-sand and bedload transport since the 1980s. These findings indicate that sand transport is a non-stationary function of water discharge over timescales ranging from within individual floods to decades. Consequently, although our continuous-measurement approach yields only a ~20–30% improvement over rating-curve estimates of sand load over multi-year periods, our approach yields up to a factor-of-five improvement in sand-load estimates over the shorter, i.e., within a flood, timescales over which the largest discharge-independent changes in sand transport occur.

Wisconsin↗