Geology Reports⌕ Search

USGS · 70203874

Inundation, flow dynamics, and damage in the 9 January 2018 Montecito Debris-Flow Event, California, USA: Opportunities and challenges for post-wildfire risk assessment

Abstract

Shortly before the beginning of the winter rainy season, one of the largest fires in California history (Thomas Fire) substantially increased the susceptibility of steep slopes in Santa Barbara and Ventura Counties to debris flows. On January 9, 2018, before the fire was fully contained, an intense burst of rain fell on the portion of the burn area above Montecito, CA. The rainfall and associated runoff triggered a series of debris flows that mobilized approximately 680,000 m3 of sediment (including boulders >4 m) at velocities up to 4 m/s down urbanized alluvial fans. The resulting destruction (including 23 fatalities, at least 167 injuries, and 408 damaged homes) underscores the need for improved understanding of debris-flow runout in the built environment, and the need for a comprehensive framework to assess the potential loss from debris flows following wildfire. We present observations of the inundation, debris-flow dynamics, and damage from the event. The data include field measurements of flow depth and deposit characteristics made 12 days after the event (before ephemeral features of the deposits were lost to recovery operations); an inventory of building damage; estimates of flow velocity; information on flow timing; soil-hydrologic properties; and post-event imagery and lidar. Together, these data provide rare spatial and dynamic constraints for testing debris-flow runout models, which are needed for advancing post-fire debris-flow hazard assessments. Our analysis also outlines a framework for translating the results of these models into estimates of economic loss based on an adaptation of the Federal Emergency Management Agency’s Hazus model for tsunamis.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 34.39725512765119° to 34.45555139540258° latitude; -119.67772179339622° to -119.53987106988663° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Jason W. Kean, Dennis M. Staley, Jeremy T. Lancaster, Francis K. Rengers, Brian J. Swanson, Jeffrey A. Coe, Janis Hernandez, Aaron Sigman, Kate E. Allstadt, Donald N. Lindsay. 2019-06-07. Inundation, flow dynamics, and damage in the 9 January 2018 Montecito Debris-Flow Event, California, USA: Opportunities and challenges for post-wildfire risk assessment. https://doi.org/10.1130/ges02048.1

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Ignimbrites of the Sour Creek dome, Yellowstone volcano, USA: Implications for the Lava Creek Tuff eruption and Yellowstone Caldera

Field observations plus sanidine compositional and 40 Ar/ 39 Ar age data collected on rocks from the Sour Creek dome (SCD) area of Yellowstone volcano (United States) serve to identify five new ignimbrite packages with ages (average 631.5 ± 0.9 ka) that are analytically indistinguishable from those of the Lava Creek Tuff (LCT), challenging the current framework of two LCT eruptive members. Newly recognized package 1 occurs as LCT-aged recycled clasts within a proximal lag breccia, reflecting a major time break in the LCT eruption sequence. Conformably above, the scoria-bearing ignimbrite of package 2 is extensively found in the dome, having been previously mis-mapped as Huck-leberry Ridge Tuff and LCT member A. To the south, package 3 is a crystal-rich, densely welded ignimbrite (inferred to be younger than package 2) that is conformably overlain by package 4, a fine-grained ignimbrite that contains abundant clasts of recycled tuff. Lastly, the topographically highest parts of the dome are made up of package 5, a multicomponent ignimbrite containing scoria, recycled clasts, and pumices, potentially correlative with package 2 and/or package 4. Cathodoluminescence imaging and zoning assessment was integrated with sanidine geochemistry from all five packages, including their recycled clasts. Four of the five packages were sourced from separate magmatic bodies within a larger plumbing system, each defined by their sanidine Ba distributions and componentry. Although the SCD was originally mapped as a resurgent dome and is actively deforming today, faults cutting the region show comparable offsets for NW-SE “resurgent faulting” as for orthogonal NE-SW faulting, the latter of which also cuts the 162 ka Elephant Back lava flow. We infer that faulting in the SCD well postdates eruption and that the SCD instead represents a domical accumulation of ignimbrite, not a resurgent structure. The abundance of recycled materials (and absence of Absaroka country rocks) in the SCD ignimbrites implies that vent locations were well inboard of the mapped caldera boundary, with some potentially along the line of the Yellowstone River, requiring a revision of the currently accepted LCT caldera outline. The LCT eruptive events were thus far more complex than currently recognized, with multiple deposits fed from multiple magma bodies over a time scale that cannot be resolved by radiometric dating.

Wyoming↗

Syn-magmatic subsidence during the early stages of continental rifting in the Mesoproterozoic—A reanalysis of legacy data for the Midcontinent Rift, western Lake Superior

The Midcontinent Rift system (ca. 1.1 Ga) is a 2000-km-long series of elongated volcanic and sedimentary troughs and associated intrusive centers exposed chiefly in the Lake Superior region of North America. The rift system represents a long history of intense magmatism and subsequent sedimentation that was arrested by far-field tectonic events before sea-floor spreading was established. The premature cessation preserved a record of processes related to the beginning of continental rifting. The rift system under Lake Superior has been long studied using seismic-reflection data collected as part of the Great Lakes International Multidisciplinary Program on Crustal Evolution (GLIMPCE). We reexamine GLIMPCE Line C by developing a detailed velocity model for time to depth conversion constrained by other legacy data. We corroborate the model and develop a geologic interpretation using gravity and magnetic modeling and ties to geology mapped onshore. We recognize superposed subsiding sedimentary and volcanic basins for the southern half of the Line C depth section. This interpretation differs from previous paradigms that show major crustal faults that bound half-grabens or full grabens. We conclude that high-velocity (6.9 km/s) intrusive zones rather than major crustal faults border the sides of the basins. We speculate that the volcanic basin represents the initiation of seaward dipping reflectors. The syn-magmatic subsidence can be explained by dike injection and volcanic loading. Discrete lava basins throughout the region likely subsided at different times in a disorganized manner along the rift trend, raising questions about the long-term role of lithospheric thinning and melt generation.

Michigan, Minnesota, Ontario, Wisconsin↗

Characterizing changes in postfire debris-flow hazard as burned areas recover

Emergency assessments of postfire debris-flow hazards that are performed by the U.S. Geological Survey (USGS) provide estimates of debris-flow likelihood and rainfall triggering conditions that are used for evaluating and managing runoff-generated debris-flow hazards in recently burned areas throughout the western United States. Although the immediate postfire period, within roughly one year after fire, is typically the most susceptible to runoff-generated debris flows, the hazard evolves in time and space as the burned area recovers. The recovery trajectory a given burned area will take depends on local climate and weather and can be difficult to predict. Some burned areas recover quickly, whereas others experience debris flows for multiple years after fire. As a result, extending our ability to update debris-flow likelihood estimates and rainfall thresholds based on observed recovery of the burned area would be beneficial. We present a method for multi-year runoff-generated debris-flow hazard assessment that leverages the USGS “M1” debris-flow likelihood model and integrates updated, satellite-derived, normalized burn ratio data to estimate vegetation recovery. We predict recovery-aware rainfall thresholds and validate them against a multi-year debris-flow hazard prediction and could be adapted for use with other debris-flow models that incorporate burn severity data.

Arizona, California, Colorado, New Mexico, Washing↗