USGS · 70187138
Debris flow rheology: Experimental analysis of fine-grained slurries
Abstract
The rheology of slurries consisting of ≤2-mm sediment from a natural debris flow deposit was measured using a wide-gap concentric-cylinder viscometer. The influence of sediment concentration and size and distribution of grains on the bulk rheological behavior of the slurries was evaluated at concentrations ranging from 0.44 to 0.66. The slurries exhibit diverse rheological behavior. At shear rates above 5 s −1 the behavior approaches that of a Bingham material; below 5 s −1 , sand exerts more influence and slurry behavior deviates from the Bingham idealization. Sand grain interactions dominate the mechanical behavior when sand concentration exceeds 0.2; transient fluctuations in measured torque, time-dependent decay of torque, and hysteresis effects are observed. Grain rubbing, interlocking, and collision cause changes in packing density, particle distribution, grain orientation, and formation and destruction of grain clusters, which may explain the observed behavior. Yield strength and plastic viscosity exhibit order-of-magnitude variation when sediment concentration changes as little as 2–4%. Owing to these complexities, it is unlikely that debris flows can be characterized by a single rheological model.
Explore related subjects
Keep this discovery
Explore connections, maps & timelines
Jon J. Major, Thomas C. Pierson. 2010-07-09. Debris flow rheology: Experimental analysis of fine-grained slurries. https://doi.org/10.1029/91wr02834
Cite the original work for its findings. Save a collection to share your selection of sources.