Geology Reports⌕ Search

Geology topics

Jon J. Major

Publications and source records attributed to Jon J. Major.

At least 19 recordsLinked to original sources
USGS2025

Topographic, climatic, and age controls on the reworking of volcanic debris avalanche deposits

Volcanic debris avalanches have deposited as much as 1000 km 3 of largely unconsolidated material on landscapes and remodeled existing drainage networks. The landscape disturbances created by these events pose severe, cascading downstream sedimentation hazards that can require long-term societal management, as demonstrated by decades of observations and ongoing interventions after the deposition of the 1980 debris avalanche of Mount St. Helens (United States). There, post-emplacement sediment yields caused by deposit erosion remain several times above estimated background yield and lakes impounded by the deposit still pose threats of downstream flooding. Despite the length and quality of measurements of the geomorphic evolution and consequent sediment release at Mount St. Helens, the long-term trajectory of drainage network evolution across, and the associated sediment release from, large volcanic debris avalanches remains uncertain. Observations and modeling at Mount St. Helens, however, indicate channel instability can persist many decades and may persist for centuries to millennia. We examined potential influences on the erosion and preservation of volcanic debris avalanche deposits (VDADs) by mapping valley networks developed on 89 VDADs selected from volcanic arcs across the world and spanning a variety of topographic settings and climate regimes. Using the best available topographic data (1 m lidar to 30 m radar-derived data depending on location) and aerial imagery, we estimated the areas of deposits that have been reworked relative to initial deposit footprints as a proxy for post-emplacement erosion. We found that a primary influence on reworking is the topographic confinement of the VDAD: confined, valley-filling deposits are systematically more reworked than unconfined deposits. There is no apparent relationship between deposit age and reworking for valley-filling deposits, indicating that drainage networks on deposits in confined topographic settings like at Mount St. Helens reform rapidly after emplacement. In contrast, our data indicate that the reworking of unconfined deposits has a monotonic positive relationship with age. This observation agrees with a conceptual model of channel formation at Mount Taranaki (New Zealand), which posits that an unconfined VDAD created a topographic high that initially (e.g., 2–8 ky for the Pungarehu formation at Taranaki) diverted erosion to the deposit margins. We found only a weak to moderate relationship between reworking and modern precipitation regimes, which may reflect differences between modern and paleo-precipitation conditions at many of our study sites. We also found no correlation between the size (surface area or volume) of deposits and the degree of reworking. The work presented here implies that downstream cascading sediment hazards from landscape-resetting processes like VDADs (such as thick, extensive pyroclastic flow deposits) depend on the relief and organization of the surrounding landscape.

Washington↗
USGS2022

Subaerial volcaniclastic deposits — Influences of initiation mechanisms and transport behaviour on characteristics and distributions

Subaerial volcaniclastic deposits are produced principally by volcanic debris avalanches, pyroclastic density currents, lahars, and tephra falls. Those deposits have widely ranging geomorphic and sedimentologic characteristics; they can mantle, modify, or create new topography, and their emplacement and subsequent reworking can have an outsized impact on the geomorphic and sedimentologic responses of watersheds surrounding, and channels draining, volcanoes. Volcaniclastic deposits provide a wealth of information about eruptive histories, volcanic processes, and landscape responses to eruptions. The volcanic processes that produce these deposits, and consequently the character and sedimentary structures of the deposits themselves, are influenced by initiation mechanism. Deposit preservation is affected by deposit magnitude, texture, and composition, depositional environment, and climate regime. Innovative analyses of deposits from several modern eruptions and advancements in physical and numerical modelling have vastly improved our understanding of volcanic processes, interpretations of eruptive histories, and recognition of the hazards posed by volcanic eruptions. This contribution highlights and summarizes major advances that have occurred in the past few decades in understanding of volcaniclastic deposits and linkages with volcanic processes.

Special Papers of the Geological Society of London↗
USGS2021

Effective hydrological events in an evolving mid‐latitude mountain river system following cataclysmic disturbance—A saga of multiple influences

Cataclysmic eruption of Mount St. Helens (USA) in 1980 reset 30 km of upper North Fork Toutle River (NFTR) valley to a zero‐state fluvial condition. Consequently, a new channel system evolved. Initially, a range of streamflows eroded channels (tens of meters incision, hundreds of meters widening) and transported immense sediment loads. Now, single, large‐magnitude or multiple moderate‐magnitude events are needed to accomplish substantial channel modification. Three large floods (two ≥100‐year events; one ∼10–25‐year event along lower Toutle River) from 1996 to 2015 indicate flood effectiveness in this environment is affected by both geomorphic and environmental factors. The largest and smallest of these floods (February 1996, November 2006) transported the most sediment by single floods since 1982; erosion and sediment transport by an ∼100‐year flood in December 2015 was not exceptional. Strong coupling between NFTR and its tall corridor banks, local geologic and hydraulic conditions promoting threshold erosion, event sequencing, and possibly a longitudinal gradient in stream power are important factors affecting event effectiveness on channel modification. In addition, environmental factors have also been influential, as variations in snowpack, storm trajectories and rainfall distributions, and episodic mobilization of debris flows have also influenced geomorphic response. Other factors such as vegetation anchoring, strong channel–hillside coupling, disparities between flood frequencies and perturbation relaxation times, and large variations in flood duration do not appear to be critical influences. Climate forecasts for warmer temperatures and a shift from snowfall to rainfall at high elevations may promote further acute geomorphic responses.

Water Resources Research↗
USGS2020

Ten ways Mount St. Helens changed our world—The enduring legacy of the 1980 eruption

Mount St. Helens was once enjoyed for its serene beauty and was considered one of America’s most majestic volcanoes because of its perfect cone shape, similar to Japan’s beloved Mount Fuji. Nearby residents assumed that the mountain was solid and enduring. That perception changed during the early spring of 1980. Then, on May 18, 1980, following 2 months of earthquakes and small explosions, the volcano’s over-steepened north flank collapsed in a colossal landslide and triggered a near-horizontal blast, followed by a powerful vertical eruption. The high-speed, rock-filled, and gas-charged blast quickly evolved into a gravitationally driven pyroclastic flow, which leveled millions of trees, stripped them of their branches and bark, and scoured soil from bedrock. The vertical eruption that followed fed a towering plume of ash for more than 9 hours. Winds carried the ash from the volcano and deposited it hundreds of miles away. Lahars (volcanic mudflows) buried river valleys. These catastrophic events caused the worst volcanic disaster in the recorded history of the conterminous United States. The events violently transformed Mount St. Helens and left a lasting impression on the hearts and minds of people living in the Pacific Northwest and beyond.

Washington↗
USGS2020

A multidecade analysis of fluvial geomorphic evolution of the Spirit Lake blockage, Mount St. Helens, Washington

Volcanic eruptions can affect landscapes in many ways and consequently alter erosion and the fluxes of water and sediment. Hydrologic and geomorphic responses to volcanic disturbances are varied in both space and time, and, in some instances, can persist for decades to centuries. Understanding the broad context of how landscapes respond to eruptions can help inform how they may evolve, and therefore provides context for managing and mitigating hazards associated with future volcanic and hydrologic events. Here, we assess the geomorphic evolution of the upper North Fork Toutle River valley, the valley most heavily affected by the Mount St. Helens May 18 and later 1980s eruptions. By doing so, we provide context for the landscape changes caused by the eruptions as they relate to potential hydrological hazards associated with Spirit Lake, an iconic landform at the northern foot of the volcano. The Spirit Lake basin was transformed by the cataclysmic 1980 eruption and had its outlet blocked. The analyses presented provide context for considerations of potential outlets for Spirit Lake, a landform which might be viewed as a “sleeping giant” on this landscape: a giant capable of causing catastrophic downstream consequences if water is released uncontrollably from the lake.

Washington↗
USGS2020

Lessons from a post-eruption landscape

From March to May 1980, magma rose high into Mount St. Helens (MSH), swelling and—as it turned out—destabilizing its north flank. Scientists knew the volcano had been highly active at times over the past 40,000 years, but the mountain, located amid the Cascade Range in southwestern Washington, had been mostly quiet since the mid-19th century. The collapse of the north flank on 18 May shattered that quiet, triggering a cascade of events that left resounding impressions not only on those who witnessed and studied them but also on the surrounding landscape [Lipman and Mullineaux, 1981; Waitt, 2015]. The eruption of MSH also provided unparalleled opportunities for advancing several disciplines [e.g., Shore et al., 1986; Newhall, 2000; Franklin and MacMahon, 2000]. Although not as conspicuously as in volcanology, the eruption and its aftermath led to an intensification of research investigating biophysical impacts of eruptions and subsequent responses [e.g., Dale et al., 2005; Pierson and Major, 2014; Crisafulli and Dale, 2018]. Long-term research on the biophysical responses at MSH has provided important new insights, challenged long-standing ideas, and provided many societal benefits. The fortieth anniversary of the eruption this year offers a timely opportunity to reflect on these insights and influences. This long-term vantage is important because sustained, place-based studies following landscape disturbances are rare; because the MSH eruption spurred the greatest depth and breadth of multidisciplinary studies of biophysical responses to landscape disturbance; and because these responses created some of the most significant societal challenges to emerge after the eruption. We summarize key biophysical disturbances and responses, highlight salient insights, and suggest actions that can extend the usefulness of these insights to volcanically vulnerable communities worldwide.

Washington↗
USGS2019

Field trip guide to Mount St. Helens, Washington—Recent and ancient volcaniclastic processes and deposits

This field guide explores volcanic effusions, sediments, and landforms at Mount St. Helens in Washington. A detailed synopsis outlines the eruptive history of Mount St. Helens from about 300,000 years ago through 1980 and beyond. The five days in the field include about 28 stops and 12 potential stops. Exposures in valleys surrounding Mount St. Helens reveal records of diverse Pleistocene and Holocene processes including debris avalanche, lahar, huge water wave on a nearby lake, pyroclastic density currents (surge and flow), tephra fall, lava flow, the growth of domes, and Pleistocene glaciation. Many of the stops explore effects of the several catastrophes that constituted the 18 May 1980 eruption and made Mount St. Helens famous.

Washington↗
USGS2019

Multidecadal geomorphic evolution of a profoundly disturbed gravel-bed river system—a complex, nonlinear response and its impact on sediment delivery

A 2.5-km3 debris avalanche during the 1980 eruption of Mount St. Helens reset the fluvial landscape of upper North Fork Toutle River valley. Since then, a new drainage network has formed and evolved. Cross-section surveys repeated over nearly 40 years at 16 locations along a 20-km reach of river valley document channel evolution, geomorphic processes, and their impacts on sediment delivery. We analyzed spatial and temporal changes in channel morphology using two new metrics: 1) a shape index that defines the degree of U-shaped or V-shaped valley geometry; and 2) an alluvial phase-space diagram that relates bed degradation or aggradation between consecutive surveys to increases or decreases in cross-section area. Metric relations reveal more diverse channel evolution than originally described by a simple, linear-response model of sequential channel initiation and incision; aggradation and widening; and subsequent episodic scour and fill with little change in bed elevation. Instead, vertical and lateral adjustments have been crucial processes intertwined throughout channel evolution. Channel evolution has followed a distinctly nonlinear and non-sequential trajectory, migrating through several phase spaces and involving varied combinations of (1) degradation and aggradation with widening and narrowing, (2) bed-level fluctuations with little change in cross-section area, and (3) changes in cross-section area with little change of bed elevation. Persistent channel widening and reworking of the channel bed presently drive elevated sediment delivery from this basin. Elevated sediment delivery is likely to persist until valley-floor widths greatly exceed that of the channel-migration corridor, and/or channel banks and valley walls stabilize.

Washington↗
USGS2019

Conceptualizing ecological responses to dam removal: If you remove it, what's to come?

One of the desired outcomes of dam decommissioning and removal is the recovery of aquatic and riparian ecosystems. To investigate this common objective, we synthesized information from empirical studies and ecological theory into conceptual models that depict key physical and biological links driving ecological responses to removing dams. We define models for three distinct spatial domains: upstream of the former reservoir, within the reservoir, and downstream of the removed dam. Emerging from these models are response trajectories that clarify potential pathways of ecological transitions in each domain. We illustrate that the responses are controlled by multiple causal pathways and feedback loops among physical and biological components of the ecosystem, creating recovery trajectories that are dynamic and nonlinear. In most cases, short-term effects are typically followed by longer-term responses that bring ecosystems to new and frequently predictable ecological condition, which may or may not be similar to what existed prior to impoundment.

BioScience↗
USGS2019

Toutle River debris flows initiated by atmospheric rivers: November 2006

In early November, 2006, an atmospheric river brought heavy rainfall and high freezing levels to the Pacific Northwest. Without snowpack to buffer the hydrologic response, the storm caused widespread landslides and debris flows in drainages sourced from every central Cascades volcano. At Mount St. Helens, in southwestern Washington State, intense rainfall in the crater of the volcano caused at least two mass failures with an aggregate volume of 4.5 million m3, which spawned a series of debris flows with velocities as great as 11 m/s. The debris flows incised Loowit Creek as much as 9 m and traveled 16 river km before transforming to hyperconcentrated flow via rapid dilution at the confluence of North Fork Toutle River (NFT), Castle Creek, and Maratta Creek (Figure 1). Reduced channel gradient downstream lowered velocity enough to transform to sediment-laden streamflow less than 40 km from the source, where suspended-sediment concentration (SSC) peaked at 177,000 mg/L. Heavy rain persisted for several days, producing over 100 cm of rainfall in upper NFT basin which caused immediate remobilization of surface deposits; half of the annual suspended-sediment discharge (SSQ) for water year (WY) 2007 was transported in 5 days, despite a relatively low 7-year flood recurrence interval. This analysis expands upon Major et al. (2005), Pitlick et al. (2007), and Olsen (2011) to document the largest suite of rainfall-triggered debris flows identified to date at Mount St. Helens. We investigate debris flow initiation, velocity, deposition, and downstream sediment flux in the NFT basin by integrating data from near real-time monitoring stations, remote sensing, terrestrial surveying, and fluvial sediment samples.

Washington↗
USGS2018

Lahar—River of volcanic mud and debris

Lahar, an Indonesian word for volcanic mudflow, is a mixture of water, mud, and volcanic rock flowing swiftly along a channel draining a volcano. Lahars can form during or after eruptions, or even during periods of inactivity. They are among the greatest threats volcanoes pose to people and property. Lahars can occur with little to no warning, and may travel great distances at high speeds, destroying or burying everything in their paths. Lahars form in many ways. They commonly occur when eruptions melt snow and ice on snow-clad volcanoes; when rains fall on steep slopes covered with fresh volcanic ash; when crater lakes, volcano glaciers or lakes dammed by volcanic debris suddenly release water; and when volcanic landslides evolve into flowing debris. Lahars are especially likely to occur at erupting or recently active volcanoes. Because lahars are so hazardous, U.S. Geological Survey scientists pay them close attention. They study lahar deposits and limits of inundation, model flow behavior, develop lahar-hazard maps, and work with community leaders and governmental authorities to help them understand and minimize the risks of devastating lahars.

Fact Sheet↗
USGS2018

Sediment erosion and delivery from Toutle River basin after the 1980 eruption of Mount St. Helens: A 30-year perspective

Exceptional sediment yields persist in Toutle River valley more than 30 years after the major 1980 eruption of Mount St. Helens. Differencing of decadal-scale digital elevation models shows the elevated load comes largely from persistent lateral channel erosion across the debris-avalanche deposit. Since the mid-1980s, rates of channel-bed-elevation change have diminished, and magnitudes of lateral erosion have outpaced those of channel incision. A digital elevation model of difference from 1999 to 2009 shows erosion across the debris-avalanche deposit is more spatially distributed compared to a model from 1987 to 1999, in which erosion was strongly focused along specific reaches of the channel.

Book chapter↗
USGS2018

Geomorphic response of the Muddy River Basin to the 1980 eruptions of Mount St. Helens, 1980–2000

The 18 May 1980 eruption of Mount St. Helens produced a mosaic of primary landscape disturbances that decreased in intensity with distance from the volcano across the headwaters of Muddy River and its tributaries. Subsequent geomorphic responses were influenced by evolving hillslope and channel conditions that affected fluxes of water, sediment, and wood, as well as by an exceptional storm in February 1996. Sediment fluxes have generally decreased, but downed wood in channels remains episodically mobile. Geomorphic change and biotic activity in the basin continue to interact in terrestrial, riparian, and aquatic ecosystems and in many cases diversify ecosystem conditions.

Washington↗
USGS2017

Dam removal: Listening in

Dam removal is widely used as an approach for river restoration in the United States. The increase in dam removals—particularly large dams—and associated dam-removal studies over the last few decades motivated a working group at the USGS John Wesley Powell Center for Analysis and Synthesis to review and synthesize available studies of dam removals and their findings. Based on dam removals thus far, some general conclusions have emerged: (1) physical responses are typically fast, with the rate of sediment erosion largely dependent on sediment characteristics and dam-removal strategy; (2) ecological responses to dam removal differ among the affected upstream, downstream, and reservoir reaches; (3) dam removal tends to quickly reestablish connectivity, restoring the movement of material and organisms between upstream and downstream river reaches; (4) geographic context, river history, and land use significantly influence river restoration trajectories and recovery potential because they control broader physical and ecological processes and conditions; and (5) quantitative modeling capability is improving, particularly for physical and broad-scale ecological effects, and gives managers information needed to understand and predict long-term effects of dam removal on riverine ecosystems. Although these studies collectively enhance our understanding of how riverine ecosystems respond to dam removal, knowledge gaps remain because most studies have been short (< 5 years) and do not adequately represent the diversity of dam types, watershed conditions, and dam-removal methods in the U.S.

Water Resources Research↗
USGS2017

Landscape context and the biophysical response of rivers to dam removal in the United States

Dams have been a fundamental part of the U.S. national agenda over the past two hundred years. Recently, however, dam removal has emerged as a strategy for addressing aging, obsolete infrastructure and more than 1,100 dams have been removed since the 1970s. However, only 130 of these removals had any ecological or geomorphic assessments, and fewer than half of those included before- and after-removal (BAR) studies. In addition, this growing, but limited collection of dam-removal studies is limited to distinct landscape settings. We conducted a meta-analysis to compare the landscape context of existing and removed dams and assessed the biophysical responses to dam removal for 63 BAR studies. The highest concentration of removed dams was in the Northeast and Upper Midwest, and most have been removed from 3 rd and 4 th order streams, in low-elevation (< 500 m) and low-slope (< 5%) watersheds that have small to moderate upstream watershed areas (10–1000 km 2 ) with a low risk of habitat degradation. Many of the BAR-studied removals also have these characteristics, suggesting that our understanding of responses to dam removals is based on a limited range of landscape settings, which limits predictive capacity in other environmental settings. Biophysical responses to dam removal varied by landscape cluster, indicating that landscape features are likely to affect biophysical responses to dam removal. However, biophysical data were not equally distributed across variables or clusters, making it difficult to determine which landscape features have the strongest effect on dam-removal response. To address the inconsistencies across dam-removal studies, we provide suggestions for prioritizing and standardizing data collection associated with dam removal activities.

PLoS ONE↗
USGS2017

Geomorphic responses to dam removal in the United States – a two-decade perspective

Recent decades have seen a marked increase in the number of dams removed in the United States. Investigations following a number of removals are beginning to inform how, and how fast, rivers and their ecosystems respond to released sediment. Though only a few tens of studies detail physical responses to removals, common findings have begun to emerge. They include: (1) Rivers are resilient and respond quickly to dam removals, especially when removals are sudden rather than prolonged. Rivers can swiftly evacuate large fractions of reservoir sediment (≥50% within one year), especially when sediment is coarse grained (sand and gravel). The channel downstream typically takes months to years—not decades—to achieve a degree of stability within its range of natural variability. (2) Modest streamflows (<2-year return interval flows) can erode and transport large amounts of reservoir sediment. Greater streamflows commonly are needed to access remnant reservoir sediment and transport it downstream. (3) Dam height, sediment volume, and sediment caliber strongly influence downstream response to dam removal. Removals of large dams (≥10 m tall) have had longer-lasting and more widespread downstream effects than more common removals of small dams. (4) Downstream valley morphology and position of a dam within a watershed influence the distribution of released sediment. Valley confinement, downstream channel gradient, locations and depths of channel pools, locations and geometries of extant channel bars, and locations of other reservoirs all influence the downstream fate of released sediment.

Book chapter↗
USGS2017

Camera system considerations for geomorphic applications of SfM photogrammetry

The availability of high-resolution, multi-temporal, remotely sensed topographic data is revolutionizing geomorphic analysis. Three-dimensional topographic point measurements acquired from structure-from-motion (SfM) photogrammetry have been shown to be highly accurate and cost-effective compared to laser-based alternatives in some environments. Use of consumer-grade digital cameras to generate terrain models and derivatives is becoming prevalent within the geomorphic community despite the details of these instruments being largely overlooked in current SfM literature. This article is protected by copyright. All rights reserved. A practical discussion of camera system selection, configuration, and image acquisition is presented. The hypothesis that optimizing source imagery can increase digital terrain model (DTM) accuracy is tested by evaluating accuracies of four SfM datasets conducted over multiple years of a gravel bed river floodplain using independent ground check points with the purpose of comparing morphological sediment budgets computed from SfM- and lidar-derived DTMs. Case study results are compared to existing SfM validation studies in an attempt to deconstruct the principle components of an SfM error budget. This article is protected by copyright. All rights reserved. Greater information capacity of source imagery was found to increase pixel matching quality, which produced 8 times greater point density and 6 times greater accuracy. When propagated through volumetric change analysis, individual DTM accuracy (6–37 cm) was sufficient to detect moderate geomorphic change (order 100,000 m 3 ) on an unvegetated fluvial surface; change detection determined from repeat lidar and SfM surveys differed by about 10%. Simple camera selection criteria increased accuracy by 64%; configuration settings or image post-processing techniques increased point density by 5–25% and decreased processing time by 10–30%. This article is protected by copyright. All rights reserved. Regression analysis of 67 reviewed datasets revealed that the best explanatory variable to predict accuracy of SfM data is photographic scale. Despite the prevalent use of object distance ratios to describe scale, nominal ground sample distance is shown to be a superior metric, explaining 68% of the variability in mean absolute vertical error.

Earth Surface Processes and Landforms↗