Geology Reports⌕ Search
Home/Archive/USGS

USGS · 70176692

Nature and mechanics of the mount St Helens rockslide — avalanche of 18 May 1980

Barry Voight·R. J. Janda·H. Glicken
View original source ↗Export metadata ↓

Abstract

The bulging sector of the north slope of Mount St. Helens collapsed on 18 May 1980, triggered by an earthquake, thereby creating a tremendous mass movement. This movement in turn initiated volcanic eruptions resulting in the formation of an avalanche of debris. Limit equilibrium analysis of the slope suggests that failure was due to several culminating factors, including progressive strength losses prior to land slip, seismicity and gravitational movements.

Explore related subjects

GeotechniqueArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Barry Voight, R. J. Janda, H. Glicken. 1983. Nature and mechanics of the mount St Helens rockslide — avalanche of 18 May 1980. https://doi.org/10.1016/0148-9062(83)90666-6

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2016

Modelling landslide liquefaction, mobility bifurcation and the dynamics of the 2014 Oso disaster

Some landslides move slowly or intermittently downslope, but others liquefy during the early stages of motion, leading to runaway acceleration and high-speed runout across low-relief terrain. Mechanisms responsible for this disparate behaviour are represented in a two-phase, depth-integrated, landslide dynamics model that melds principles from soil mechanics, granular mechanics and fluid mechanics. The model assumes that gradually increasing pore-water pressure causes slope failure to nucleate at the weakest point on a basal slip surface in a statically balanced mass. Failure then spreads to adjacent regions as a result of momentum exchange. Liquefaction is contingent on pore-pressure feedback that depends on the initial soil state. The importance of this feedback is illustrated by using the model to study the dynamics of a disastrous landslide that occurred near Oso, Washington, USA, on 22 March 2014. Alternative simulations of the event reveal the pronounced effects of a landslide mobility bifurcation that occurs if the initial void ratio of water-saturated soil equals the lithostatic, critical-state void ratio. They also show that the tendency for bifurcation increases as the soil permeability decreases. The bifurcation implies that it can be difficult to discriminate conditions that favour slow landsliding from those that favour liquefaction and long runout.

Washington↗
USGS2013

Discussion: Numerical study on the entrainment of bed material into rapid landslides

A paper recently published in this journal (Pirulli & Pastor, 2012) uses numerical modelling to study the important problem of entrainment of bed material by landslides. Unfortunately, some of the basic equations employed in the study are flawed, because they violate the principle of linear momentum conservation. Similar errors exist in some other studies of entrainment, and the errors appear to stem from confusion about the role of bed-sediment inertia in differing frames of reference.

Geotechnique↗
USGS2004

Delineation of a collapse feature in a noisy environment using a multichannel surface wave technique

A collapse developed at Calvert Cliffs Nuclear Power Plant, Maryland, in early 2001. The location of the collapse was over a groundwater drainage system pipe buried at an elevation of +0??9 m (reference is to Chesapeake Bay level). The cause of the collapse was a subsurface drain pipe that collapsed because of saltwater corrosion of the corrugated metal pipe. The inflow/outflow of sea water and groundwater flow caused soil to be removed from the area where the pipe collapsed. To prevent damage to nearby structures, the collapse was quickly filled with uncompacted sand and gravel (???36000 kg). However, the plant had an immediate need to determine whether more underground voids existed. A high-frequency multichannel surface-wave survey technique was conducted to define the zone affected by the collapse. Although the surface-wave survey at Calvert Cliffs Nuclear Power Plant was conducted at a noise level 50-100 times higher than the normal environment for a shallow seismic survey, the shear (S)-wave velocity field calculated from surface-wave data delineated a possible zone affected by the collapse. The S-wave velocity field showed chimney-shaped low-velocity anomalies that were directly related to the collapse. Based on S-wave velocity field maps, a potential zone affected by the collapse was tentatively defined.

Geotechnique↗