Geology Reports⌕ Search
Home/Archive/USGS

USGS · 70174967

Characterization of gas hydrate distribution using conventional 3D seismic data in the Pearl River Mouth Basin, South China Sea

Xiujuan Wang·Jin Qiang·Timothy S. Collett·Hesheng Shi·Shengxiong Yang·Chengzhi Yan·Yuanping Li·Zhenzhen Wang·Duanxin Chen
View original source ↗Export metadata ↓

Abstract

A new 3D seismic reflection data volume acquired in 2012 has allowed for the detailed mapping and characterization of gas hydrate distribution in the Pearl River Mouth Basin in the South China Sea. Previous studies of core and logging data showed that gas hydrate occurrence at high concentrations is controlled by the presence of relatively coarse-grained sediment and the upward migration of thermogenic gas from the deeper sediment section into the overlying gas hydrate stability zone (BGHSZ); however, the spatial distribution of the gas hydrate remains poorly defined. We used a constrained sparse spike inversion technique to generate acoustic-impedance images of the hydrate-bearing sedimentary section from the newly acquired 3D seismic data volume. High-amplitude reflections just above the bottom-simulating reflectors (BSRs) were interpreted to be associated with the accumulation of gas hydrate with elevated saturations. Enhanced seismic reflections below the BSRs were interpreted to indicate the presence of free gas. The base of the BGHSZ was established using the occurrence of BSRs. In areas absent of well-developed BSRs, the BGHSZ was calculated from a model using the inverted P-wave velocity and subsurface temperature data. Seismic attributes were also extracted along the BGHSZ that indicate variations reservoir properties and inferred hydrocarbon accumulations at each site. Gas hydrate saturations estimated from the inversion of acoustic impedance of conventional 3D seismic data, along with well-log-derived rock-physics models were also used to estimate gas hydrate saturations. Our analysis determined that the gas hydrate petroleum system varies significantly across the Pearl River Mouth Basin and that variability in sedimentary properties as a product of depositional processes and the upward migration of gas from deeper thermogenic sources control the distribution of gas hydrates in this basin.

Explore related subjects

InterpretationArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Xiujuan Wang, Jin Qiang, Timothy S. Collett, Hesheng Shi, Shengxiong Yang, Chengzhi Yan, Yuanping Li, Zhenzhen Wang, Duanxin Chen. 2016. Characterization of gas hydrate distribution using conventional 3D seismic data in the Pearl River Mouth Basin, South China Sea. https://doi.org/10.1190/int-2015-0020.1

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2022

Neural net detection of seismic features related to gas hydrates and free gas accumulations on the northern U.S. Atlantic margin

Bottom-simulating reflections (BSRs) that sometimes mark the base of the gas hydrate stability zone in marine sediments are often identified based on the reverse polarity reflections that cut across stratigraphic layering in seismic amplitude data. On the northern U.S. Atlantic margin (USAM) between Cape Hatteras and Hudson Canyon, legacy seismic data have revealed pronounced BSRs south of the deepwater extension of Hudson Canyon and more subtle ones from offshore Delaware south to Cape Hatteras, where the reflections sometimes follow stratigraphic layering. Using high-resolution seismic data acquired during the 2018 Mid-Atlantic Resource Imaging Experiment and a supervised neural net, we identify seismic features associated with gas hydrates and/or the top of gas between Hudson Canyon and Cape Hatteras. Using seismic attributes especially sensitive to the presence of gas, we train a neural network algorithm on seismic data from an area with strong BSRs and then apply the model to the rest of the data set. The results indicate that gas hydrate and/or shallow free gas are significantly more widespread on the northern part of the USAM than previously known. Seismic indicators of gas extend landward from the 2000 m isobath to the upper continental slope in sectors with (offshore Virginia) and, to a lesser extent, without (offshore New Jersey) pervasive upper slope methane seeps. Higher sand content and intermediate sediment thickness, factors related to the container size and gas charge in a petroleum systems framework, are associated with more robust gas indicators.

U.S. Atlantic margin↗
USGS2021

Multimineral petrophysics of thermally immature Eagle Ford Group and Cretaceous mudstones, U.S. Geological Survey Gulf Coast 1 research wellbore in central Texas

Traditional petrophysical methods to evaluate organic richness and mineralogy using gamma-ray and resistivity log responses are not diagnostic in source rocks. We have developed a deterministic, nonproprietary method to quantify formation variability in total organic carbon (TOC) and three key mudrock mineralogical components of nonhydrocarbon-bearing source rock strata of the Eagle Ford Group by developing a set of log-derived multimineral models calibrated with Fourier transform infrared spectroscopy core data from the research borehole U.S. Geological Survey Gulf Coast 1 West Woodway. We determined that bulk density response is a reliable indicator of organic content in these thermally immature, water-bearing source rocks. Multimineral findings indicate that a high degree of laminae-scale mineralogical heterogeneity exists due to thinly interbedded carbonate cements amid clay-rich mudstone layers. The lower part of the Eagle Ford Group contains the highest average TOC content (4.7 wt%) and the highest average carbonate volume (64.1 vol%), making it the optimal target in thermally mature areas for source-rock potential and hydraulic-fracture placement. In contrast, the uppermost portion of the Eagle Ford Group contains the highest average volume of clay minerals (42.6 vol%), which increases the potential for wellbore stability issues. Petrophysical characterization reveals that porosity is approximately 30% in this relatively uncompacted formation. In this thermally immature source rock, water saturation is nearly 100% and no free hydrocarbons were observed on the resistivity logs. No evidence of borehole ellipticity was observed on the three-arm caliper log, and horizontal stresses are presumed to be directionally uniform in the vicinity of this near-surface wellbore. This shallow wellbore has a temperature gradient of 1.87°F/100 ft (16.3°C/km) and is likely influenced by earth surface heating.

Texas↗
USGS2020

Gas hydrate quantification in Walker Ridge block 313, Gulf of Mexico, from full-waveform inversion of ocean-bottom seismic data

The Gulf of Mexico (GOM) Joint Industry Project Leg 2 logging-while-drilling data in Walker Ridge lease block 313 (WR313) in the GOM detected gas hydrate in coarse- and fine-grained sediments at sites WR313-G and WR313-H. The coarse-grained units are thin ( ⁠ < 10 m ⁠ ) and highly saturated, whereas the fine-grained unit is thick (approximately 200 m) with low saturation and fracture-filling gas hydrate. Unlike its coarse-grained counterpart, the seismic character of the fine-grained unit does not clearly indicate the presence of gas hydrate, which would likely have remained undiscovered in the absence of drilling. In this paper, through frequency-domain acoustic full-waveform inversion (FWI) of ocean-bottom seismometer data along a 2D multichannel seismic transect near sites WR313-G and WR313-H, we detect and quantify gas hydrate in the fine-grained unit. Key results are as follows: First, the base of the gas hydrate stability zone, which is not obvious in the reflection profile, can be discerned in the FWI results. Second, the gas hydrate in the fine-grained unit is mainly confined to the area between two sets of opposite-dipping normal faults implying that the fault architecture may be partially responsible for this gas hydrate accumulation and distribution.

Gulf of Mexico↗