Geology ReportsSearch

USGS · 70047462

Water resources of Lehigh County, Pennsylvania

Abstract

Lehigh County occupies an area of 347 square miles in southeastern Pennsylvania. The northern part of Lehigh County is underlain by the Martinsburg Formation, which consists chiefly of shale and slate. The central part of the county, where most of the population centers are located and much of the urbanization is occurring, is underlain by alternating beds of limestone and dolomite. From oldest to youngest, these carbonate rocks are the Leithsville Formation, the Allentown Formation, the Beekmantown Group, and the Jacksonburg Formation. The southern part of the county is underlain chiefly by the shales, sandstones, and conglomerates of the Brunswick Formation and by metamorphic and igneous rocks.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 40.419422° to 40.786114° latitude; -75.89003° to -75.335381° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Charles R. Wood, Herbert N. Flippo, Joseph B. Lescinsky, James L. Barker. 1972. Water resources of Lehigh County, Pennsylvania. https://pubs.usgs.gov/publication/70047462

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Summary of groundwater-recharge estimates for Pennsylvania

Groundwater recharge is water that infiltrates through the subsurface to the zone of saturation beneath the water table. Because recharge is a difficult parameter to quantify, it is typically estimated from measurements of other parameters like streamflow and precipitation. This report provides a general overview of processes affecting recharge in Pennsylvania and presents estimates of recharge rates from studies at various scales. The most common method for estimating recharge in Pennsylvania has been to estimate base flow from measurements of streamflow and assume that base flow (expressed in inches over the basin) approximates recharge. Statewide estimates of mean annual groundwater recharge were developed by relating base flow to basin characteristics of HUC10 watersheds (a fifth-level classification that uses 10 digits to define unique hydrologic units) using a regression equation. The regression analysis indicated that mean annual precipitation, average daily maximum temperature, percent of sand in soil, percent of carbonate rock in the watershed, and average stream-channel slope were significant factors in the explaining the variability of groundwater recharge across the Commonwealth. Several maps are included in this report to illustrate the principal factors affecting recharge and provide additional information about the spatial distribution of recharge in Pennsylvania. The maps portray the patterns of precipitation, temperature, prevailing winds across Pennsylvania’s varied physiography; illustrate the error associated with recharge estimates; and show the spatial variability of recharge as a percent of precipitation. National, statewide, regional, and local values of recharge, based on numerous studies, are compiled to allow comparison of estimates from various sources. Together these plates provide a synopsis of groundwater-recharge estimations and factors in Pennsylvania. Areas that receive the most recharge are typically those that get the most rainfall, have favorable surface conditions for infiltration, and are less susceptible to the influences of high temperatures, and thus, evapotranspiration. Areas that have less recharge in Pennsylvania are typically those with less precipitation, less permeable soils, and higher temperatures that are conducive to greater rates of evapotranspiration.

Pennsylvania

Hydrogeology and groundwater quality of the glaciated valleys of Bradford, Tioga, and Potter Counties, Pennsylvania

The most important sources of groundwater in Bradford, Tioga, and Potter Counties are the stratified-drift aquifers. Saturated sand and gravel primarily of outwash origin forms extensive unconfined aquifers in the valleys. Outwash is underlain in most major valleys by silt, clay, and very fine sand of lacustrine origin that comprise extensive confining units. The lacustrine confining units locally exceed 100 feet in thickness. Confined aquifers of ice-contact sand and gravel are buried locally beneath the lacustrine deposits. Bedrock and till are the basal confining units of the stratifies-drift aquifer systems. Recharge to the stratified-drift aquifers if by direct infiltration of precipitation, tributary-stream infiltration, infiltration of unchanneled runoff at the valley walls, and groundwater inflow from the bedrock and till uplands. Valley areas underlain by superficial sand and gravel contribute about 1 million gallons per day per square mile of water from precipitation to the aquifers. Tributary streams provide recharge of nearly 590 gallons per day per foot of stream reach. Water is added at the rate of 1 million gallons per day per square mile of bordering uplands not drained by tributary streams to the stratified-drift aquifers from unchanneled runoff and groundwater inflow. Induced infiltration can be a major source of recharge to well fields completed in unconfined stratified-drift aquifers that are in good hydraulic connection with surface water. The well fields of an industrial site in North Towanda, a public-water supplier at Tioga Point, and the U.S. Fish and Wildlife Service at Asaph accounted for 75 percent of the 10.8 million gallons per day pf groundwater withdrawn by public suppliers and other selected users in 1985. The well fields tap stratified-drift aquifers that are substantially recharged by induced infiltration or tributary-stream infiltration. Specific-capacity data from 95 wells indicate that most wells completed in stratified-drift aquifers have specific capacities an order of magnitude greater than those completed in till and bedrock, Wells completed in unconfined stratified-drift aquifers and in bedrock aquifers have the highest and lowest median specific capacities -- 24 and 0.80 gallons per minute per foot of drawdown, respectively. Wells completed in confined stratified-drift aquifers and in till have median specific capacties of 11 and 0.87 gallons per minute per foot of drawdown, respectively. The results of 223 groundwater-quality analyses indicate two major hydrogeochemical zones: (1) a zone of unrestricted groundwater flow that contains water of the calcium bicarbonate type (this zone is found in almost all of the stratified-drift aquifers, till, and shallow bedrock systems); and (2) a zone of restricted groundwater slow that contains water of the sodium chloride type (this zone is found in the bedrock, and, in some areas, in till and confined stratified-drift aquifers). Samples pumped from wells that penetrate restricted-flow zones have median concentrations of total dissolved solids, dissolved chloride, and dissolved barium of 840 and 350 milligrams per liter, and 2,100 micrograms per liter, respectively. Excessive concentrations of iron and manganese are common in the groundwater of the study area; about 50 percent of the wells sampled contain water that has iron and manganese concentrations that exceed the U.S. Environmental Protection Agency secondary maximum contaminant levels of 300 and 50 micrograms per liter, respectively. Only water in the unconfined stratified-drift aquifers and the Catskill Formation has median concentrations lower than these limits.

Pennsylvania

Summary groundwater resources of Centre County, Pennsylvania

The northwest third of Centre County lies in the Appalachian Plateaus physiographic province. The higher altitudes are underlain by the Conemaugh, Allegheny, and Pottsville Groups, which consist of sandstone, shale, and thin limestone and coal beds. The average yield of nondomestic wells in the Allegheny Group is 20 gpm (gallons per minute) and that in the Pottsville Group 100 gpm. Water from wells in these groups commonly has a high concentration of iron. Most of the rest of the Appalachian Plateaus province is underlain by the Burgoon Sandstone. The Burgoon yields soft water, and the average yield of nondomestic wells is 70 gpm.

Pennsylvania