Geology ReportsSearch

USGS · 70036770

An Atlas of ShakeMaps and population exposure catalog for earthquake loss modeling

Abstract

We present an Atlas of ShakeMaps and a catalog of human population exposures to moderate-to-strong ground shaking (EXPO-CAT) for recent historical earthquakes (1973-2007). The common purpose of the Atlas and exposure catalog is to calibrate earthquake loss models to be used in the US Geological Survey's Prompt Assessment of Global Earthquakes for Response (PAGER). The full ShakeMap Atlas currently comprises over 5,600 earthquakes from January 1973 through December 2007, with almost 500 of these maps constrained-to varying degrees-by instrumental ground motions, macroseismic intensity data, community internet intensity observations, and published earthquake rupture models. The catalog of human exposures is derived using current PAGER methodologies. Exposure to discrete levels of shaking intensity is obtained by correlating Atlas ShakeMaps with a global population database. Combining this population exposure dataset with historical earthquake loss data, such as PAGER-CAT, provides a useful resource for calibrating loss methodologies against a systematically-derived set of ShakeMap hazard outputs. We illustrate two example uses for EXPO-CAT; (1) simple objective ranking of country vulnerability to earthquakes, and; (2) the influence of time-of-day on earthquake mortality. In general, we observe that countries in similar geographic regions with similar construction practices tend to cluster spatially in terms of relative vulnerability. We also find little quantitative evidence to suggest that time-of-day is a significant factor in earthquake mortality. Moreover, earthquake mortality appears to be more systematically linked to the population exposed to severe ground shaking (Modified Mercalli Intensity VIII+). Finally, equipped with the full Atlas of ShakeMaps, we merge each of these maps and find the maximum estimated peak ground acceleration at any grid point in the world for the past 35 years. We subsequently compare this "composite ShakeMap" with existing global hazard models, calculating the spatial area of the existing hazard maps exceeded by the combined ShakeMap ground motions. In general, these analyses suggest that existing global, and regional, hazard maps tend to overestimate hazard. Both the Atlas of ShakeMaps and EXPO-CAT have many potential uses for examining earthquake risk and epidemiology. All of the datasets discussed herein are available for download on the PAGER Web page ( http://earthquake.usgs.gov/ eqcenter/pager/prodandref/ ). ?? 2009 Springer Science+Business Media B.V.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

T.I. Allen, D.J. Wald, P.S. Earle, K. D. Marano, A.J. Hotovec, K. Lin, M.G. Hearne. 2009-05-26. An Atlas of ShakeMaps and population exposure catalog for earthquake loss modeling. https://doi.org/10.1007/s10518-009-9120-y

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Hazard-consistent seismic losses and collapse capacities for light-frame wood buildings in California and Cascadia

We evaluate the seismic performance of modern seismically designed wood light-frame (WLF) buildings, considering regional seismic hazard characteristics that influence ground motion duration and frequency content and, thus, seismic risk. Results show that WLF building response correlates strongly with ground motion spectral shape but weakly with duration. Due to the flatter spectral shape of ground motions from subduction events, WLF buildings at sites affected by these earthquakes may experience double the economic losses for a given intensity of shaking, and collapse capacities may be reduced by up to 50%, compared to those at sites affected by crustal earthquakes. These differences could motivate significant increases in design values at sites affected by subduction earthquakes to achieve the uniform risk targets of the American Society of Civil Engineers (ASCE) 7 standard.

Alaska, California, Oregon Washington

Response study of a 51-story-tall Los Angeles, California building inferred from motions of the Mw7.1 July 5, 2019 Ridgecrest, California earthquake

A 51-story building in downtown Los Angeles that is equipped with a seismic monitoring accelerometric array recorded the Mw7.1 Ridgecrest, California earthquake of July 5, 2019. The building is a dual-core reinforced-concrete shear-wall and perimeter-column structure with ~ 80% of floors constructed as post-tensioned flat slabs, which makes it a trending design. Using system identification methods, spectral analyses, and coherence-phase angle computations, the recorded response data allowed the identification of dynamic response characteristics (fundamental frequencies of [NS] 0.21 Hz, [EW] 0.28 Hz, and [Torsional] 0.45 Hz, critical damping percentages < 2.5%, and associated mode shapes), as well as computation of drift ratios with maximum peaks of 0.145% for both NS and EW directions. The critical damping percentages are consistent with those recommended by LATBSDC ( 2017 ). There is no indication from the records that post-tensioned slab design played any role in altering the dynamic characteristics.

California

Experimental evaluation of four ground-motion scaling methods for dynamic response-history analysis of nonlinear structures

This paper experimentally evaluates four methods to scale earthquake ground-motions within an ensemble of records to minimize the statistical dispersion and maximize the accuracy in the dynamic peak roof drift demand and peak inter-story drift demand estimates from response-history analyses of nonlinear building structures. The scaling methods that are investigated are based on: (1) ASCE/SEI 7–10 guidelines; (2) spectral acceleration at the fundamental (first mode) period of the structure, S a ( T 1 ); (3) maximum incremental velocity, MIV ; and (4) modal pushover analysis. A total of 720 shake-table tests of four small-scale nonlinear building frame specimens with different static and dynamic characteristics are conducted. The peak displacement demands from full suites of 36 near-fault ground-motion records as well as from smaller “unbiased” and “biased” design subsets (bins) of ground-motions are included. Out of the four scaling methods, ground-motions scaled to the median MIV of the ensemble resulted in the smallest dispersion in the peak roof and inter-story drift demands. Scaling based on MIV also provided the most accurate median demands as compared with the “benchmark” demands for structures with greater nonlinearity; however, this accuracy was reduced for structures exhibiting reduced nonlinearity. The modal pushover-based scaling (MPS) procedure was the only method to conservatively overestimate the median drift demands.

Bulletin of Earthquake Engineering