Geology Reports⌕ Search

USGS · 70033104

Application of synchrotron methods to assess the uptake of roadway-derived Zn by earthworms in an urban soil

Abstract

The impact of human activities on biogeochemical cycles in terrestrial environments is nowhere more apparent than in urban landscapes. Trace metals, collected on roadways and transported by storm water, may contaminate soils and sediments associated with storm water management systems. These systems will accumulate metals and associated sediments may reach toxic levels for terrestrial and aquatic organisms using the retention basins as habitat. The fate and bioavailability of these metals once deposited is poorly understood. Here we present results from a dose-response experiment that examines the application of synchrotron X-ray fluorescence methods (μ-SXRF) to test the hypothesis that earthworms will bio-accumulate Zn in a roadway-dust contaminated soil system providing a potential pathway for roadway contaminants into the terrestrial food web, and that the storage and distribution of Zn will change with the level of exposure reflecting the micronutrient status of Zn. Lumbricus friendi was exposed to Zn-bearing roadway dust amended to a field soil at six target concentrations ranging from background levels (45 mg/kg Zn) to highly contaminated levels (460 mg/kg Zn) designed to replicate the observed concentration range in storm-water retention basin soils. After a 30 day exposure, Zn storage in the intestine is positively correlated with dose and there is a change in the pattern of Zn storage within the intestine. This relationship is only clear when μ-SXRF Zn map data is coupled with a traditional toxicological approach, and suggests that the gut concentration in L. friendi is a better indicator of Zn bioaccumulation and storage than the total body burden.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

S.M. Lev, E. R. Landa, K. Szlavecz, R. Casey, J. Snodgrass. 2018-07-05. Application of synchrotron methods to assess the uptake of roadway-derived Zn by earthworms in an urban soil. https://doi.org/10.1180/minmag.2008.072.1.191

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Evaluation for internal consistency in the thermodynamic network involving fluorite, cryolite and villiaumite solubilities and aqueous species at 25°C and 1 bar

Thermodynamic data are constrained by the interrelated thermodynamic equations in addition to the observational measurements and their uncertainties. The consequence is a network of thermodynamic properties that can be evaluated for their internal consistency. In this study, three fluoride minerals that can cause high fluoride concentrations in groundwaters are evaluated for their solubilities and their internal thermodynamic consistency with calorimetric, isopiestic and electrochemical measurements: fluorite, CaF 2 , cryolite, Na 3 AlF 6 , and villiaumite, NaF. This evaluation involves the three solids and 13 aqueous species, the free ions of Ca 2+ , Na + , Al 3+ and F – , and the hydroxido and fluorido complexes of Al 3+ , and the CaF + ion pair. For the fluorite–cryolite–villiaumite–aqueous species network, the number of components is minimal, and the solubility studies are mostly of high quality. Re-evaluations of original data using PHREEQC helps to broaden the quantitative evaluation of thermodynamic properties and to resolve apparent discrepancies. A check on this thermodynamic network shows that through a careful appraisal of the literature, a highly consistent set of values can be derived. The resultant infinite-dilution solubility-product constants at 25°C and 1 bar are: for fluorite solubility, log K sp = –10.57 ± 0.08; for cryolite solubility, log K sp = –33.9 ± 0.2; and for villiaumite solubility, log K sp = –0.4981 ± 0.003.

Mineralogical Magazine↗

Compositional variation in minerals of the chevkinite group

The composition of chevkinite and perrierite, the most common members of the chevkinite group, is closely expressed by the formula A4BC2D2Si4O22, where A = (La,Ce,Ca,Sr,Th), B = Fe2+, C = (Fe2+,Fe3+,Ti,Al,Zr,Nb) and D = Ti. The A site is dominated by a strong negative correlation between (Ca+Sr) and the REE. Chondrite-normalized REE patterns are very variable, e.g. in LREE/HREE and Eu/Eu*. The C site is dominated by Ti, Al and Fe2+, in very variable proportions. Most chevkinites and perrierites are close to stoichiometric, with cation sums between 12.9 and 13.5, compared to the theoretical 13. There is no single, generally applicable charge balancing substitution scheme in the group; however, the general relationship (Ca+Sr)A + TiC + REEA + M3C+2+ defines a linear array with r2 = 0.91. Chevkinite and perrierite are shown to be compositionally distinct on the basis of CaO, FeO* Al2O3 and Ce2O3 abundances. Chevkinite forms mainly in chemically evolved parageneses, such as syenites, rhyolites and fenites associated with carbonatite complexes. Perrierite is more commonly recorded from igneous rocks of mafic to intermediate composition. The compositional characteristics and possible structural formulae of other members of the chevkinite group are reviewed briefly.

Mineralogical Magazine↗

Origin of placer laurite from Borneo: Se and As contents, and S isotopic compositions

We examined grains of the platinum-group mineral, laurite (RuS2), from the type locality, Pontyn River, Tanah Laut, Borneo, and from the Tambanio River, southeast Borneo. The grains show a variety of morphologies, including euhedral grains with conchoidal fractures and pits, and spherical grains with no crystal faces, probably because of abrasion. Inclusions are rare, but one grain contains Ca-Al amphilbole inclusions, and another contains an inclusion of chalcopyrite+bornite+pentlandite+heazlewoodite (Ni3S2) that is considered to have formed by a two-stage process of exsolution and crystallization from a once homogeneous Fe-Cu-Ni sulphide melt. All grains examined are solid solutions of Ru and Os with Ir (2.71-11.76 wt.%) and Pd (0.31-0.66 wt%). Their compositions are similar to laurite from ophiolitic rocks. The compositions show broad negative correlations between Os and Ir, between As and Ir, and between As (0.4-0.74 wt.%) and Se (140 to 240 ppm). Laurite with higher Os contains more Se and less Ir and As. The negative correlations between Se and As may be attributed to their occupancy of the S site, but the compositional variations of Os. Ir and As probably reflect the compositional variation of rocks where the crystals grew. Ratios of S/Se in laurite show a narrow spread from 1380 to 2300, which are similar to ratios for sulphides from the refractory sub-are mantle. Sulphur isotopic compositions of laurite are independent of chemical compositions and morphologies and are similar to the chondritic value of 0???. The data suggest that S in laurite has not undergone redox changes and originated from the refractory mantle. The data support the formation of laurite in the residual mantle or in a magnia generated from such a refractory mantle, followed by erosion after the obduction of the host ultramafic rocks. ?? 2004 The Mineralogical Society.

Mineralogical Magazine↗