Tectonic setting of Cretaceous basins on the NE Tibetan Plateau: Insights from the Jungong basin

William Craddock; E. Kirby; Z. Dewen; L. Jianhui

doi:10.1111/j.1365-2117.2011.00515.x

Home/Archive/USGS

USGS · 70032631

Tectonic setting of Cretaceous basins on the NE Tibetan Plateau: Insights from the Jungong basin

William Craddock·E. Kirby·Z. Dewen·L. Jianhui

View original source ↗Export metadata ↓

Abstract

Quantifying the Cenozoic growth of high topography in the Indo‐Asian collision zone remains challenging, due in part to significant shortening that occurred within Eurasia before collision. A growing body of evidence suggests that regions far removed from the suture zone experienced deformation before and during the early phases of Himalayan orogenesis. In the present‐day north‐eastern Tibetan Plateau, widespread deposits of Cretaceous sediment attest to significant basin formation; however, the tectonic setting of these basins remains enigmatic. We present a study of a regionally extensive network of sedimentary basins that are spatially associated with a system of SE‐vergent thrust faults and are now exposed in the high ranges of the north‐eastern corner of the Tibetan Plateau. We focus on a particularly well‐exposed basin, located ∼20 km north of the Kunlun fault in the Anyemaqen Shan. The basin is filled by ∼900 m of alluvial sediments that become finer‐grained away from the basin‐bounding fault. Additionally, beds in the proximal footwall of the basin‐bounding fault exhibit progressive, up‐section shallowing and several intraformational unconformities which can be traced into correlative conformities in the distal part of the basin. The observations show sediment accumulated in the basin during fault motion. Regional constraints on the timing of sediment deposition are provided by both fossil assemblages from the Early Cretaceous, and by K–Ar dating of volcanic rocks that floor and cross‐cut sedimentary fill. We argue that during the Cretaceous, the interior NE Tibetan Plateau experienced NW–SE contractional deformation similar to that documented throughout the Qinling–Dabie orogen to the east. The Songpan‐Ganzi terrane apparently marked the southern limit of this deformation, such that it may have been a relatively rigid block in the Tibetan lithosphere, separating regions experiencing deformation north of the convergent Tethyan margin from regions deforming inboard of the east Asian margin.

Explore related subjects

Basin Research Article

Source-reported bounding extent: 18.1977° to 53.4588° latitude; 73.67538° to 135.02631° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

William Craddock, E. Kirby, Z. Dewen, L. Jianhui. 2011-07-14. Tectonic setting of Cretaceous basins on the NE Tibetan Plateau: Insights from the Jungong basin. https://doi.org/10.1111/j.1365-2117.2011.00515.x

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Multi-proxy thermal history of basin heating during Cordilleran orogenesis in the Magallanes-Austral retroarc foreland basin, Patagonian Andes

Resolving thermal histories in sedimentary basins is crucial for interpreting orogenic growth, basin burial, and tectonic processes during Cordilleran orogenesis. In the Magallanes–Austral Basin, Patagonian Andes, we integrate new (U-Th)/He thermochronology, vitrinite reflectance (%R o ), calcite-cement clumped isotope data and thermal history modelling to resolve the origin of the regionally extensive Paleogene unconformity (51°S–50°S). Thermal history modelling results require post-depositional heating of Palaeocene (Danian–Selandian) strata below the unconformity and suggest maximum burial temperatures of 87°C–101°C (55–52 Ma) and 89°C–92°C (18–16 Ma). For lower Eocene strata above the unconformity, Miocene burial temperatures (89°C–92°C) are consistent with calcite cement formation temperatures (~62°C–92°C) from carbonate clumped isotopes. Our results indicate that basin burial and heating between ca. 60 and 52 Ma were likely driven by shallowing of the subducting Farallon plate and enhanced plate coupling preceding arrival of the Farallon–Phoenix mid-ocean ridge. Subsequent basin inversion and cooling from ca. 52 to 44 Ma correspond with subduction of this mid-ocean ridge. Refined thermal models, constrained by expanded thermochronometric and organic maturation datasets, indicate that up to ~1.7–2.0 km of proximal foreland basin strata were removed during uplift and erosion across the Paleogene basin margin. A return to basin subsidence beginning ca. 44 Ma may reflect dynamic subsidence after passage of the mid-ocean ridge and renewed coupling between the fold-thrust belt and foreland basin system. Neogene thermal histories document continued subsidence, localized hot orogenic fluid flow along stratigraphic boundaries, followed by a final phase of basin inversion and cooling at ca. 18–16 Ma, which we attribute to regional uplift associated with Chile ridge subduction. Altogether, this study demonstrates that multiple thermal indices when analysed and modelled can provide clarity for tectonic and stratigraphic events that affect foreland basins.

Patagonian Andes↗

USGS2026

Depositional interplay between the Ancestral Rocky Mountains and Ouachita–Marathon–Sonora orogenies: Insights from provenance records in the late Paleozoic Marfa Basin, West Texas, U.S.A.

The Marfa Basin in West Texas is a late Palaeozoic synorogenic depocenter associated with regional deformation linked to the Ancestral Rocky Mountains (ARM) and Ouachita–Marathon–Sonora (OMS) orogenies in southwestern Laurentia. Basin strata range in age from Middle Pennsylvanian to the middle Permian and include the Cieneguita, Alta, Pinto Canyon, Rose Mine and Mina Grande Formations. Sandstone petrography and detrital zircon (DZ) U–Pb and (U–Th)/He double dating data from these strata reveal three tectonically driven sedimentation stages: syntectonic ARM deposition, progressive OMS foredeep deposition and an orogenic transition. The Cieneguita and lower part of the Alta Formations exhibit a Mesoproterozoic DZ age signature (~1318 and ~1076 Ma age peaks) and quartzo-feldspathic sandstone compositions sourced from the adjacent ARM-related Diablo Platform basement uplift in the Middle Pennsylvanian to earliest Permian. In contrast, the upper part of the Alta Formation, as well as the Pinto Canyon and Rose Mine Formations, have peri-Gondwanan DZ age signatures, with Mesoproterozoic (~1069–1036 Ma age peaks), Neoproterozoic–Cambrian (~700–490 Ma) and Palaeozoic (~490–300 Ma) age modes and litho-quartzose sandstone compositions derived from the OMS fold-and-thrust belt and orogenic hinterland during the early to middle Permian. The lower to middle parts of the Alta Formation have alternating DZ age signatures and sandstone compositions from both ARM and OMS sources, revealing that the transition in the sediment supply occurred during the middle Wolfcampian. This transition was not characterised by source mixing, but rather by sediment interfingering alternately sourced from the Diablo Platform uplift and the advancing OMS belt. These observations are confirmed by the DZ He ages, which reveal distinct cooling histories for both source terranes. These results document a switch from ARM- to OMS-related syntectonic deposition in southwestern Laurentia during the early Permian, demonstrating that ARM-driven deformation largely preceded the continental collision along the Marathon segment of the OMS orogen.

Texas↗

USGS2023

Episodic evolution of a protracted convergent margin revealed by detrital zircon geochronology in the Greater Caucasus

Convergent margins play a fundamental role in the construction and modification of Earth's lithosphere and are characterized by poorly understood episodic processes that occur during the progression from subduction to terminal collision. On the northern margin of the active Arabia-Eurasia collision zone, the Greater Caucasus Mountains provide an opportunity to study a protracted convergent margin that spanned most of the Phanerozoic and culminated in Cenozoic continental collision. However, the main episodes of lithosphere formation and deformation along this margin remain enigmatic. Here, we use detrital zircon U–Pb geochronology from Paleozoic and Mesozoic (meta)sedimentary rocks in the Greater Caucasus, along with select zircon U–Pb and Hf isotopic data from coeval igneous rocks, to link key magmatic and depositional episodes along the Caucasus convergent margin. Devonian to Early Carboniferous rocks were deposited prior to Late Carboniferous accretion of the Greater Caucasus crystalline core onto the Laurussian margin. Permian to Triassic rocks document a period of northward subduction and forearc deposition south of a continental margin volcanic arc in the Northern Caucasus and Scythian Platform. Jurassic rocks record the opening of the Caucasus Basin as a back-arc rift during southward migration of the arc front into the Lesser Caucasus. Cretaceous rocks have few Jurassic-Cretaceous zircons, indicating a period of relative magmatic quiescence and minimal exhumation within this basin. Late Cenozoic closure of the Caucasus Basin juxtaposed the Lesser Caucasus arc to the south against the crystalline core of the Greater Caucasus to the north and led to the formation of a hypothesized terminal suture. We expect this suture to be within ~20 km of the southern range front of the Greater Caucasus because all analysed rocks to the north exhibit a provenance affinity with the crystalline core of the Greater Caucasus.

Basin Research↗