Geology Reports⌕ Search

USGS · 70022856

USGS National Seismic Hazard Maps

Abstract

The U.S. Geological Survey (USGS) recently completed new probabilistic seismic hazard maps for the United States, including Alaska and Hawaii. These hazard maps form the basis of the probabilistic component of the design maps used in the 1997 edition of the NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures , prepared by the Building Seismic Safety Council and published by FEMA. The hazard maps depict peak horizontal ground acceleration and spectral response at 0.2, 0.3, and 1.0 sec periods, with 10%, 5%, and 2% probabilities of exceedance in 50 years, corresponding to return times of about 500, 1000, and 2500 years, respectively. In this paper we outline the methodology used to construct the hazard maps. There are three basic components to the maps. First, we use spatially smoothed historic seismicity as one portion of the hazard calculation. In this model, we apply the general observation that moderate and large earthquakes tend to occur near areas of previous small or moderate events, with some notable exceptions. Second, we consider large background source zones based on broad geologic criteria to quantify hazard in areas with little or no historic seismicity, but with the potential for generating large events. Third, we include the hazard from specific fault sources. We use about 450 faults in the western United States (WUS) and derive recurrence times from either geologic slip rates or the dating of pre-historic earthquakes from trenching of faults or other paleoseismic methods. Recurrence estimates for large earthquakes in New Madrid and Charleston, South Carolina, were taken from recent paleoliquefaction studies. We used logic trees to incorporate different seismicity models, fault recurrence models, Cascadia great earthquake scenarios, and ground-motion attenuation relations. We present disaggregation plots showing the contribution to hazard at four cities from potential earthquakes with various magnitudes and distances.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

A.D. Frankel, C.S. Mueller, T. P. Barnhard, E. V. Leyendecker, R. L. Wesson, S. C. Harmsen, F. W. Klein, D. M. Perkins, N.C. Dickman, S.L. Hanson, M. G. Hopper. 2000-02-01. USGS National Seismic Hazard Maps. https://doi.org/10.1193/1.1586079

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

An examination of the reasons for, and variability of, the differences between response spectra and pseudo response spectra

For many decades, it has been common practice to overlook the differences between response spectra and pseudo response spectra. This practice stems from analyses indicating that the average difference between response spectra and pseudo response spectra is negligible for a viscous damping ratio of 5%, which is near-universally adopted. As others have shown, the differences depend strongly on the damping ratio, earthquake magnitude, and oscillator period, with larger differences for larger damping, smaller magnitudes, and longer periods. To quantify the full statistical distribution of the ratio of the absolute acceleration response spectrum (SA) to the pseudo absolute acceleration response spectrum (PSA), we fit empirical ratios with the generalized gamma distribution. Data for magnitudes from 4.0 to 5.5 give 95% prediction intervals for the ratio of 1.00–1.02 at 1 s and 1.01–2.24 at 10 s for 5% damping. For 30% damping, these intervals increase to 1.14–2.01 at 1 s and 1.62–11.8 at 10 s, respectively. Further, we demonstrate how the shape of the ground-motion Fourier amplitude spectrum interacts with the natural period of the oscillator to control the differences in the response spectra type. Routinely treating the two measures of acceleration response spectra as interchangeable may lead to unacceptable inconsistencies when the response spectra of individual records are important or when larger damping ratios are used, such as in direct displacement-based design. If one must convert between them, the uncertainty of the conversion should be accounted for during analysis.

Earthquake Spectra↗

Accounting for biases in the analysis of building damage data for the 2023 M7.8 Türkiye/Syria earthquake sequence

In the aftermath of a large earthquake, several practical constraints affect the systematic collection of data for assessing building damage. The available data are therefore typically incomplete, frequently missing key information such as the type of construction, age and geographic location. Moreover, the observations often favour certain locations and damage grades. In the absence of robust methods, using such data directly for characterising the building stock or conducting fragility assessments can introduce systematic bias. Using the 2023 M7.8 Türkiye/Syria earthquake sequence as a case study, we propose a statistical model that enables joint inference over the inventory and fragility of the building stock while explicitly accounting for sources of data error and missing information. The results show higher-than-expected vulnerability amongst several building types, particularly mid- and high-rise reinforced concrete buildings, which performed extremely poorly during the 2023 earthquake sequence. The proposed Bayesian framework provides rigorous uncertainty quantification that can be propagated to future applications.

Earthquake Spectra↗

Suite of regional seismic velocity models for the U.S. Atlantic and Gulf Coastal Plains (CPVMv2.0): Incorporating epistemic uncertainty in velocity models

The U.S. Atlantic and Gulf Coastal Plain (CP) sediments are kilometers-thick, low-velocity deposits underlain by high-velocity bedrock that create regional patterns of amplification and attenuation of ground motions. Capturing these effects is challenging because of the limited subsurface information available, particularly the shear wave velocity ( V S ) structure down to bedrock (or assumed reference rock condition) and the associated uncertainties. This paper introduces a new suite of regional velocity models for the CPs, called CPVMv2.0, which builds upon previous efforts integrating geology, V S measurements, and sediment thickness in the region. CPVMv2.0 uses 750 measured V S profiles and identifies nine surficial-geologic-age-based and geography-based groups (with alternative physiographic-province-based subgroupings) to create surface-based median V S profiles. This suite of new models also includes six subsurface-based median profiles developed using geologic age boundaries from depth-dependent stratigraphic sequences extracted from the U.S. Geological Survey National Crustal Model. In addition to quantifying aleatory variability in sediment velocity, weathered-rock velocity, bedrock velocity, and the depth to the top of weathered rock and bedrock, CPVMv2.0 provides alternative profile models that allow for the characterization of the epistemic uncertainty. This is a unique and relevant feature of CPVMv2.0. Our suite of models was validated using measured and estimated fundamental resonant frequencies as well as other V S models in the region. CPVMv2.0 enables the incorporation of crustal velocities (and their associated variability and uncertainty) into physics-based ground-motion simulations in the eastern United States and into the development of new ground-motion models aiming to characterize systematic site effects via V S30 , depths to V S isosurfaces, and/or sediment thickness in the region.

U.S. Atlantic and Gulf Coastal Plains↗