Geology Reports⌕ Search
Home/Archive/USGS

USGS · 70018946

Use of electric logs to estimate water quality of pre-tertiary aquifers

J. B. Lindner-Lunsford·Breton W. Bruce
View original source ↗Export metadata ↓

Abstract

Electric logs provide a means of estimating ground-water quality in areas where water analyses are not available. Most of the methods for interpreting these logs have been developed for the petroleum industry and are most reliable in saline aquifers (concentration of dissolved solids as sodium chloride greater than about 50,000 mg/l). The resistivity-porosity and spontaneous-potential methods were evaluated to determine if they could be applied to identify zones of fresh water (concentration of dissolved solids as sodium chloride less than 1,000 mg/l) in three potential aquifers in central Wyoming. The potential aquifers have different lithologies–sandstone, clayey sandstone, and carbonate. The two methods generally were reliable predictors of water quality in the sandstone and carbonate potential aquifers. In the clayey sandstone potential aquifer, predictions of the dissolved-solids concentration using the two methods differed by more than an order of magnitude in several cases. When the resistivity values are corrected for the presence of clay and shale as identified on a natural gamma log, the agreement between the results of the two methods improved by an average of 58 percent.

Explore related subjects

GroundwaterArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J. B. Lindner-Lunsford, Breton W. Bruce. 2005-08-04. Use of electric logs to estimate water quality of pre-tertiary aquifers. https://doi.org/10.1111/j.1745-6584.1995.tb00309.x

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Computing flow-field distortion coefficients from well-construction and formation properties

Direct measurements of groundwater velocity made with borehole flowmeters in screened wells must be compensated for the effects of flow-field distortion (also known as borehole acceleration). A theoretical equation developed by Drost et al. (1968) and simple inputs describing hydraulic properties of well construction and geologic formation were programmed into an Excel workbook to facilitate computation by groundwater-flowmeter users. Tables describing the physical and hydraulic properties for well constructions and gravel pack media are provided with an example to facilitate use of the workbook. Groundwater flowlines converge or diverge as they pass from a geologic formation, through a gravel pack and well screen. The extent of flowline convergence or divergence and the value of the flow-field distortion coefficient is related to the relative changes in hydraulic conductivity of the well screen, gravel pack, and geologic formation. Convergence or divergence is accompanied by acceleration or deceleration of groundwater. Direct measurements of groundwater velocity at the center of the monitoring well can be adjusted to provide a more accurate estimate of velocity in the formation by applying a correction for flow-field distortion. Variables required to compute the flow-field distortion coefficient include the hydraulic conductivity of the gravel pack, well screen, and the geologic formation surrounding the well screen; the borehole radius, and the inside radius and outside radius of the well screen.

Groundwater↗
USGS2026

Predicting groundwater hydrochemical facies in three dimensions with random forest classification, USA

A random forest classification (RFC) model was developed to predict hydrochemical facies (HCFs) of groundwater in three dimensions across the conterminous United States (CONUS). Major-ion data from 152,673 sites were used to categorize groundwater into one of six HCFs (CaMg-HCO 3 , NaK-HCO 3 , CaMg-SO 4 , NaK-SO 4 , Cl, or Mixed). These six HCFs were used as targets for RFC modeling. Model features that represent relevant geochemical processes and/or physical conditions were derived from previously published data. Additional model features were specifically engineered to support this analysis: elevation of the bottom of a well relative to the base of drinking water (ERDW) and six flags that relate geologic units to HCFs. The most important model feature was ERDW. The model was used to map HCFs at a 1-km 2 resolution across CONUS and to depths of 400 m below the base of drinking water (which varies from 22 m to 2 km). Model predictions are consistent with expectations. CaMg-HCO 3 is predicted to occur near the water table in more humid settings, and areas underlain by carbonate or crystalline rocks. At depths below the base of drinking-water supplies, the model predicts a rapid transition from HCO 3 HCFs to Cl. Model predictions are accurate based on point data, and data averaged across hydrogeologic regions and with depth. Model predictions of HCFs could be used for multiple purposes, including the mapping of salinity and other groundwater characteristics.

Groundwater↗