Geology ReportsSearch

USGS · 70015031

Historic creep rate and potential for seismic slip along the Hayward Fault, California

Abstract

The Hayward fault is considered the most likely source of one or more major earthquakes in the San Francisco Bay area in the next few decades. Historically, at least one, and probably two, major earthquakes (about M 6.8) occurred along the Hayward fault, one in 1836 and another in 1868. Little is known about the 1836 event, but the 1868 earthquake was accompanied by a surface rupture that extended as much as 41 km along the southern part of the fault. Although the amount of surface slip in 1868 is uncertain, right slip (including afterslip) reached at least several centimeters, and possibly several decimeters in places. This paper documents the spatial variation of creep rate along the Hayward fault since the 1868 earthquake. Creep (aseismic fault slip) occurs over at least 66 km and may extend over the fault's entire 82-km length, of which about 13 km lies underwater. Creep rate seems nearly constant over decades, but short-term variations occur. We derive creep rate mainly from our own systematic surveying of offset cultural features (curbs, fences, and buildings). On each feature we solve directly for accumulated creep by using multiple linear regression. Creep rate mostly falls in the range of 3.5–6.5 mm/yr; but systematic variation occurs along strike. Fault segments with distinctly higher and lower rates generally correspond to parts of the fault most salient from the overall average alinement of the fault. Most distinctive is a 4-km-long section near the south end of the fault that creeps at about 9 mm/yr. Such a high rate has occurred there at least since the 1920s and probably since the 1868 earthquake, as indicated by an offset railroad track built in 1869. We suggest that this 9 mm/yr slip rate may approach the long-term or deep slip rate that controls average recurrence interval between major earthquakes. If so, assuming an elastic rebound model, the potential for slip in large earthquakes below the surficial creeping zone is now ∼1.1 m in the southern (1868) segment of the fault and ≥ 1.4 m in the northern (1836?) segment. Subtracting surface creep rates from a long-term slip rate of 9 mm/yr gives present potential for surface slip in large earthquakes of up to 0.8 m, with an average of 0.6 m in the northern segment and 0.4 m in the southern segment. We present a simple hypothesis for rupture potential that is compatible with historic creep rate, microseismicity distribution, and geodetic data. If seismic rupture occurs on segments 41 km long by 10 km deep (7 km fully locked, 3 km creeping), today's potential for seismic moment release is 1.4 × 10 19 and 1.1 × 10 19 N m for both 1836? and 1868 segments, respectively, and 2.5 × 10 19 N m for both segments jointly. Converting moment to magnitude gives M L 6.8 in the northern segment, M L 6.7 in the southern segment, and M L 7.0 for simultaneous rupture of both.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 37.36797435878155° to 38.153997218446115° latitude; -122.4591064453125° to -121.59393310546875° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J. J. Lienkaemper, G. Borchardt, M. Lisowski. 2012-09-20. Historic creep rate and potential for seismic slip along the Hayward Fault, California. https://doi.org/10.1029/91jb01589

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Crustal structure along and surrounding the Hawaiian Islands: Volcanic island construction across scarred oceanic crust

The Hawaiian Ridge is a classic example of an intraplate volcanic island chain emplaced on oceanic lithosphere. We seek to constrain both the deformation from island loading around the Hawaiian Ridge and the influence of the oceanic lithosphere, including the Molokaʻi fracture zone (MFZ), on off-axis volcanic emplacement. To examine these processes, we conducted a marine geophysical experiment in 2018 that included the acquisition of eight multichannel seismic reflection lines and used a 6,600 in 3 tuned air gun array and an ultra-long hydrophone streamer cable towed behind R/V Marcus G. Langseth across and around the southern Hawaiian Ridge. We image both the top of igneous oceanic crust and the Moho, and we observe significant variations in regional crustal structure and thickness variations, Moho characteristics, the locations of the buried MFZ, and the flexure of the Pacific oceanic lithosphere under the Hawaiian Ridge. We observe up to ∼4.5 km of deflection of the igneous oceanic crust in response to the volcanic load with sediment thickness increasing to ∼3–3.4 km near the ridge but not correlating with the deflection. A systematic difference in igneous oceanic crustal thickness is found north (average ∼5.2 km) and south (average ∼5.9 km), of the MFZ that also correspond to changes in Moho characteristics. The MFZ itself is associated with the largest crustal thickness variations (∼3.7–7.6 km). Magma ascent through these different crustal regions may account for some variations of magmatic flux to the surface along the Hawaiian Ridge.

Hawaii

Source, migration pathways, and atmospheric release of geologic methane associated with the complex permafrost regimes of the outer Mackenzie River Delta, Arctic, Canada

Sources and fluxes of methane to the atmosphere from permafrost are significant but poorly constrained in global climate models. We present data collected from the variable permafrost setting of the outer Mackenzie River Delta, including observations of aquatic methane seepage, core determinations of in situ methane occurrence and seep gas isotope geochemistry. The sources and locations of in situ geologic methane occurrence and aquatic and atmospheric gas release appear to be controlled by the regional geology and permafrost conditions. Where permafrost is >250 m thick, thermogenic gas deposits at depth are isolated by laterally continuous, low permeability ice-bearing sediments with few through-going thawed taliks. Thus, the observed in situ methane and aquatic gas seepage appears to be dominated by microbial methane. In contrast, where permafrost is <80 m thick, taliks are more likely to be through-going, providing permeable conduits from depth and migration pathways for both thermogenic and biogenic gas. Continuous annual fluid sampling of two lakes and a river channel documents aquatic methane flux from microbial sources, more deeply buried thermogenic sources, and mixtures of both. Using estimates of in situ methane concentration from deep core samples and observations of in situ free gas occurrences, we conclude that the reservoir of in situ geologic methane within ice bonded permafrost is substantial and that this methane is presently migrating with ongoing atmospheric release. It is our assessment that the permafrost setting, and processes described are sensitive to future climate change as the permafrost warms.

Mackenzie River Delta

Measuring erosional and depositional patterns across Comet 67P's imhotep region

Comet 67P/Churyumov-Gerasimenko displays a pronounced hemispherical dichotomy in surface morphology, where the southern hemisphere exhibits more erosional features than the northern hemisphere due to receiving much greater solar radiation. Consequently, it is generally assumed that particles are ejected from the southern hemisphere through sublimation and a significant fraction eventually descends as airfall, covering the northern terrains. To investigate this south-to-north material transfer during the comet's perihelion passage, we used photoclinometry to measure material redistribution within its most extensive smooth terrain deposit around the Imhotep region. However, our findings do not align with this expected trend. Instead, we show that local-scale processes substantially impact the erosion and accumulation of material, with one area experiencing net erosion while another nearby region, just a few dozen meters away, sees sediment buildup. Our analysis underscores the complex interplay of processes shaping Comet 67P's surface and likely comets more generally.

Journal of Geophysical Research