Geology topics

Research about India

Source-linked reports with geographic coverage including India.

At least 37 records · Page 2Linked to original sources

USGS2019

Compressibility and particle crushing of Krishna-Godavari Basin sediments from offshore India: Implications for gas production from deep-water gas hydrate deposits

Depressurizing a gas hydrate reservoir to extract methane induces high effective stresses that act to compress the reservoir. Predicting whether a gas hydrate reservoir is viable as an energy resource requires enhanced understanding of the reservoir’s compressibility and susceptibility to particle crushing in response to elevated effective stress because of their impact on the long-term permeability and geomechanical stability of the reservoir. This study investigates physical and geomechanical properties of natural sediments with and without tetrahydrofuran (THF) hydrate subjected to high effective stresses of up to 25 MPa. Experimental results show the stiffness of hydrate-free sediments is mainly governed by the stress state and history, while the stiffness of hydrate-bearing sediments reflects both the grain supporting nature of the interconnected hydrate phase and stress effects. The Poisson’s ratio of hydrate-bearing sediments at low stresses is dominated by the Poisson’s ratio of the interconnected pore-filling phases, and dominated at high stresses by elastic properties of both the skeleton and pore-filling phases. The stress-void ratio responses of hydrate-bearing sediments above the pre-consolidation stress yields a slightly convex-downward trend, suggesting compressibility is influenced by the stiffness of THF hydrate and sediment grains rather than only by void space reduction. The shape of the compression index (Cc) trend may be attributed to an increasing effective gas hydrate saturation as the total pore volume decreases under loading. The results also show that the presence of THF hydrate in sediments can mitigate particle crushing by suppressing particle rearrangement and supporting a portion of the load that would otherwise have to be carried by the sediment. Therefore, the loss of hydrate crystals during gas production may exacerbate sand crushing.

Marine and Petroleum Geology↗

USGS2019

Multi-measurement approach for establishing the base of gas hydrate occurrence in the Krishna-Godavari Basin for sites cored during Expedition NGHP-02 in the offshore of India

The 2015 National Gas Hydrate Program of India's second expedition, NGHP-02, acquired logging and coring datasets for constraining the base of the gas hydrate occurrence zone (deepest GH) and the theoretical base of gas hydrate stability zone (BGHS). These data are used here for two primary goals: to constrain the deepest occurrence of gas hydrate relative to predicted stability limits and the observed BSR, and to characterize the nature of the contact between gas hydrate-bearing sediment and the underlying gas hydrate-free sediment. A consensus depth for the deepest GH is derived for each NGHP-02 coring site from downhole indicators of gas hydrate occurrence obtained from well-log electrical resistivity and acoustic data, pressure core compressional wave velocity measurements, and conventional core measurements of anomalously low temperatures. To establish the theoretical BGHS, models of gas hydrate phase stability with depth are compared with downhole temperature profiles derived from: 1) assuming a constant geothermal gradient consistent with downhole temperature measurements, and 2) assuming constant heat flow using a geotherm through the downhole temperature measurements and incorporating thermal conductivity calculated from borehole logging data. Although the deepest NGHP-02 GH occurrences are controlled at several sites by a lithologic boundary, most sites have deepest GH occurrences within a single coarse-grained lithology. Cutoffs within a single coarse-grained lithology, which occur for the primary NGHP-02 Area B gas hydrate reservoir, will inhibit pore-pressure drawdowns used to extract methane from gas hydrate as an energy resource.

Bay of Bengal↗

USGS2019

Pressure core analysis of geomechanical and fluid flow properties of seals associated with gas hydrate-bearing reservoirs in the Krishna-Godavari Basin, offshore India

Physical properties of the sediment directly overlying a gas hydrate reservoir provide important controls on the effectiveness of depressurizing that reservoir to extract methane from gas hydrate as an energy resource. The permeability of overlying sediment determines if a gas hydrate reservoir’s upper contact will provide an effective seal that enables efficient reservoir depressurization. Compressibility, stiffness and strength indicate how overlying sediment will deform as the in situ stress changes during production, providing engineering data for well designs. Assessing these properties requires minimally-disturbed sediment. India’s National Gas Hydrates Program Expedition 2 (NGHP-02) provided an opportunity to study these seal sediment properties, reducing disturbance from gas exsolution and bubble growth by collecting a pressure core from the seal sediment just above the primary gas hydrate reservoir at Site NGHP-02-08 in Area C of the Krishna-Godavari Basin. The effective stress chamber (ESC) and the direct shear chamber (DSC) devices in the suite of Pressure Core Characterization Tools (PCCTs) were used to measure permeability, compressibility, stiffness and shear strength at the in situ vertical stress. Geotechnical properties of the predominantly fine-grained seal layer at in situ vertical stress are in typical clay sediment ranges, with low measured permeability (0.02 mD), high compressibility (Cc = 0.26 – 0.33) and low shear strength (404 kPa). Though pressure and temperature were maintained throughout the collection and measurement process to stabilize gas hydrate, the lack of effective stress in the pressure core storage chamber and the chamber pressurization with methane-free water caused core expansion and gas hydrate in a thin coarser-grained layer to dissolve. The PCCTs can reapply in situ stress with incremental loading steps during a consolidation test to account for sediment compaction. Gas hydrate dissolution can be limited by storing cores just above freezing temperatures, and by using solid spacers to reduce the storage chamber’s free volume.

Marine and Petroleum Geology↗

USGS2019

Permeability anisotropy and relative permeability in sediments from the National Gas Hydrate Program Expedition 02, offshore India

Gas and water permeability through hydrate-bearing sediments essentially governs the economic feasibility of gas production from gas hydrate deposits. Characterizing a reservoir’s permeability can be difficult because even collocated permeability measurements can vary by 4-5 orders of magnitude, due partly to differences between how various testing methods inherently measure permeability in different directions and at different scales. This study uses a customized flow anisotropy cell to investigate geomechanical and hydrological properties of hydrate-bearing sediments focusing on permeability anisotropy (i.e., horizontal, kh, to vertical, kv, permeability ratio) and relative permeability. Two cores recovered during India’s National Gas Hydrate Program Expedition 02 (NGHP-02) are tested in this study. Near in situ effective vertical stress, ~ 2MPa, the permeability anisotropy is approximately kh/kv = 1.86 for the “seal core” (from a fine-grained non-reservoir overburden sedimentary section) and kh/kv = 4.24 for the gas hydrate reservoir score with tetrahydrofuran (THF) hydrate saturation Sh = 0.8. Permeability anisotropy increases exponentially with effective vertical stress, as described by kh/kv = α(σv/MPa)^β, with α = 1.6, β = 0.22 for seal sediment and α = 3, β = 0.5 for THF hydrate-bearing sediment. Results imply the measured permeability from permeameter tests with vertical flow may underestimate the reservoir’s flow performance, which is mainly horizontal (radial) toward a vertical well. Hydrates in sediment increase the gas-entry pressure and residual water saturation, but decrease the water retention curve’s shape factor (m), resulting in a steeper curve. Distributions of available pore space sizes for flow in sediment with and without THF hydrate (Sh = 0.8) follow a log-normal distribution. Hydrate formation decreases the apparent mean pore size from ~10 µm to ~2 µm, without evidently changing the pore size distribution's standard deviation. Gas hydrate dissociation increases effective permeability and relative permeability to gas.

Journal of Marine and Petroleum Geology↗

USGS2019

2D micromodel study of clogging behavior of fine-grained particles associated with gas hydrate production in NGHP-02 gas hydrate reservoir sediments

Fine-grained particles (fines) commonly coexist with coarse-grained sediments that host gas hydrate. These fines can be mobilized by liquid and gas flow during gas hydrate production. Once mobilized, fines can clog pore throats and reduce reservoir permeability. Even where particle sizes are smaller than pore-throat sizes, clogs can form due to clusters of fines. For certain types of fines, particularly swelling clays, cluster sizes depend on pore-fluid chemistry, which changes as pore-fluid freshens during gas hydrate dissociation. Fines can also be concentrated by a moving gas/liquid interface, increasing the chances of pore-throat clogging regardless of fines type. To test the relative significance of these clogging mechanisms, 2D micromodel experiments have been conducted with different pore-throat widths (20, 40, 60 and 100 m), single-phase pore-fluids (deionized water and 2M-sodium-chloride solution), and moving gas/liquid interfaces on specimens from Sites NGHP-02-09 and NGHP-02-16 (NGHP-02: National Gas Hydrate Program Expedition 02) as well as a selection of pure fines (silica silt, mica, calcium carbonate, diatoms, kaolin, and bentonite). Clogging depended on the ratio of particle-to-pore throat size, and also on pore-fluid chemistry because the pore-fluid chemistry changes effectively increased or decreased the fines cluster size relative to the pore-throat width. These interactions can be predicted based on the fines electrical sensitivity (defined by Jang and Santamarina, 2016). The fine-grained sediment component (grain size < 75 m) from the primary gas hydrate reservoir layers at Sites NGHP-02-09 and -16 show clogging via blocking or size exclusion (sieving) due to the large particles. Clogs also formed due to bridging or blocking by clusters of the smaller particles. Clogging generally occurred for pore-water sediment concentrations so low (0.2% by mass or less), that it was difficult to resolve the enhanced clogging in the presence of the gas/liquid meniscus.

Bay of Bengal↗

USGS2019

India National Gas Hydrate Program Expedition 02 summary of scientiﬁc results: Numerical simulation of reservoir response to depressurization

The India National Gas Hydrate Program Expedition 02 (NGHP-02) discovered gas hydrate at high saturation in sand reservoirs at several sites in the deepwater Bay of Bengal. To assess the potential response of those deposits to scientific depressurization experiments, comprehensive geologic models were constructed to enable numerical simulation for two sites. Both sites (NGHP-02-09 and NGHP-02-16) feature thick sequences of thinly-interbedded reservoir and non-reservoir facies at sub-seafloor depths of less than 300 m and sub-sea depths of 2,400 m or more. These settings pose significant challenges to current modeling capabilities. First, the thinly-bedded reservoir architecture complicates the determination of basic reservoir parameters from both log and core data due to measurement resolution issues. Secondly, the fine-scale variation in sediment properties imparts great contrasts in key parameters over very short distances, creating high gradients at multiple scales and varying orientations that necessitate careful design of high-definition simulation grids. Thirdly, the deposits include internal sources of water, as well as a range of complex boundary conditions, including variable permeability within the overlying mud-rich “seals”, that complicate reservoir depressurization. Lastly, because of the unique combination of great water depth and relatively shallow sub-seafloor depth, models designed to maximize the dissociation rate impose large pressure drawdowns on relatively low-strength sediments. This condition renders the proper evaluation and integration of the geomechanical response to hydrate dissociation critical. In this report, we review the history of gas hydrate reservoir simulation, discuss methods for creating geologic input models, and summarize the key findings and implications of the collaborative NGHP-02 numerical simulation effort. Together, the studies confirm the viability of the modeled accumulations for scientific testing and identify key challenges related to the selection of specific test sites and the design of test wells.

Journal of Marine and Petroleum Geology↗

USGS2019

Physical property characteristics of gas hydrate-bearing reservoir and associated seal sediments collected during NGHP-02 in the Krishna-Godavari Basin, in the offshore of India

India’s National Gas Hydrate Program Expedition 02 (NGHP-02), was conducted to better understand geologic controls on gas hydrate occurrence and morphology, targeting potentially coarse-grained sediments near the base of the continental slope offshore eastern India. This study combines seismic, logging-while-drilling data, and a petroleum systems approach to provide a regional geologic context for the core- and grain-scale analyses. This multi-scale approach provides insight on the gas hydrate distribution, morphology and anticipated system response to depressurization-induced methane extraction. The study area, NGHP-02 Area B in the Krishna-Godavari Basin, contains a buried anticline/syncline structure that hosts fracture-filling gas hydrate in fine-grained sediment overlying coarser sediments with pore-occupying gas hydrate. Core- and grain-scale measurements show fine-grained sediment exerts a primary control on the distribution and morphology of gas hydrate in Area B. Diatoms in the fine-grained overburden cause porosity to increase with depth, reaching ~70% at the underlying reservoir contact. High porosity, combined with near-vertical faults, suggests the overlying sediment is an imperfect seal. This allows methane to escape the gas hydrate reservoir sediments and form primarily grain-displacing gas hydrate veins in the fine-grained overburden. Within the reservoir, fine-grained layers are interbedded with coarser-grained gas hydrate reservoir sands. Even in the reservoir sands, however, a soil classification study shows the fines content is high enough to control hydraulic and mechanical properties, such as permeability, compressibility and shear strength. Fluid motion during methane extraction from gas hydrates can mobilize those fines, which can then clog pore throats, limiting production rates. Pore-water freshening during gas hydrate dissociation can increase fines mobilization, particularly given the smectite identified in the fine-grained interbeds. Accounting for fines content and specific fines mineralogy throughout the gas hydrate petroleum system is important for predicting production efficiency from gas hydrate occurrences along the crest of the anticline in NGHP-02 Area B.

Marine and Petroleum Geology↗

USGS2019

India National Gas Hydrate Program Expedition 02 summary of scientific results: Evaluation of natural gas hydrate-bearing pressure cores

India’s National Gas Hydrate Program (NGHP) Expedition-02 was conducted in 2015 with the goal of investigating numerous locations that had been determined to be prospective for gas hydrate at high saturation in sand-rich reservoirs. Initial logging while drilling data revealed extensive sand-rich gas hydrate occurrences at multiple drill sites in two broad areas. These sites were further investigated through the acquisition and analyses of pressure cores designed to document 1) gas hydrate occurrence within the reservoirs; 2) the petrophysical nature of the reservoir and associated seals, in their native state as well as during and after the dissociation of gas hydrate; 3) the geomechanical nature of the reservoir and seals; and 4) the geochemical nature of reservoir fluids. The cores were initially evaluated at sea, and select subsamples were transferred for more extensive analyses at specialized laboratories both in Japan and in the United States. The samples encompassed a wide range of gas hydrate saturation (from 0 to 100%) within reservoir sediments ranging from sandy silts to gravels, providing opportunities to extend and refine insights into the nature of gas hydrate reservoirs gained in previous programs. Select findings and implications of this coordinated pressure-core evaluation program are reported in numerous papers within the NGHP-02 Special Thematic Volume and are summarized here with respect to the following issues: the evaluation and mitigation of core disturbance, the assessment of gas hydrate occurrence and saturation, the geomechanics and petrophysics of both reservoirs and “seals” in situ, and the potential dynamic geomechanical and petrophysical behavior of reservoir and seals during production.

Journal of Marine and Petroleum Geology↗

USGS2019

Numerical simulations of depressurization-induced gas production from an interbedded turbidite gas hydrate-bearing sedimentary section in the offshore India: Site NGHP-02-16 (Area-B)

The recent National Gas Hydrate Program Expedition 02 (NGHP-02) identified the existence of gas hydrate-bearing sand reservoirs at a number of sites in the offshore of India including Site NGHP-02-16 in Area-B of the Krishna-Godavari Basin. The architecture of that gas hydrate accumulation is characterized by thin, gas hydrate-bearing, high quality sand layers interbedded with mud layers within a turbidite interval. The lowest gas hydrate-bearing layer contacting a thinly-interbedded saline aquifer designates the base of the gas hydrate stability zone (BGHSZ). The proximity of the BGHSZ and the average temperature around 20oC make the reservoir a favorable target for hydrate destabilization by means of the depressurization method. The results of the reservoir simulations indicate high gas production potential from this marine gas hydrate deposit with manageable concomitant water production using a well completion design that hydraulically isolates layers with water-saturated sands. Using a detailed geological input model, the predicted cumulative gas rates reach 3.1 x 104 m3/day (1.1 mmscf/day) after 90 days of continuous depressurization and demonstrate sustained production rates of 3.0 x 104 m3/day (1.0 mmscf/day) after 5 years of production. The interbedded nature of this gas hydrate occurrence promotes the development of horizontal dissociation interfaces between gas hydrate-bearing sand and mud layers. As a result, non-uniform gas production along the horizontal interfaces becomes a primary determinant of reservoir performance. Simulation cases have been executed to determine the impact of the uncertainty in in situ reservoir permeability and the manner in which intrinsic permeability dynamically changes during dissociation in response to the imposed effective stress increase. The cases where effective permeability is initially low and compaction is highly sensitive to stress result in the least favorable production predictions.

Journal of Marine and Petroleum Geology↗

USGS2019

National Gas Hydrate Program expedition 02: Identification of gas hydrate prospects in the Krishna-Godavari Basin, offshore India

After completing the first expedition of India's National Gas Hydrate Program (NGHP-01) in 2006, it was concluded that for the next expedition (National Gas Hydrate Program 02; NGHP-02), a new drill site review effort should focus on identifying potential deep-water offshore gas hydrate accumulations in sand dominated depositional environments. Therefore, geological and geophysical data analysis and 3D seismic data interpretation along with associated seismic modeling were carried out in three areas of the Krishna-Godavari Basin: Areas B, C, and E. Conventional petroleum exploration approaches of seismic amplitude evaluation were adapted to prospect for potential sand-rich depositional systems within the gas hydrate stability zone. Subsequently, these prospective areas were further assessed through the geological and geophysical evaluation of depositional setting, gas sources, and gas migration pathways. In Area B, prospecting focused on a large anticlinal structure with a prominent bottom-simulating reflector and several key horizons that indicated evidence for potential sand-hosted hydrate occurrences. In Area C, the prospects were distributed throughout various settings within a very large deep-water channel-levee-fan system with complex indications of potential gas hydrate occurrence in sand-prone seismic facies. In Area E, prospects were associated with high amplitude events within inferred channel-levee sequences. Based on the pre-expedition/onboard drill-site evaluation, the 22 most promising sites in the Krishna-Godavari Basin were identified and prioritized to investigate and delineate a total of 17 identified gas hydrate prospects. This paper describes the geo-scientific studies carried out prior to NGHP-02 for site identification, evaluation and prioritization. An important outcome of this study is the identification of two potentially producible gas hydrate systems inferred to host significant quantity of gas hydrate in stratigraphic-structural traps.

Journal of Marine and Petroleum Geology↗

USGS2019

India National Gas Hydrate Program Expedition-02: Operational and technical summary

The India National Gas Hydrate Program is being steered by the government of India's Ministry of Petroleum and Natural Gas (MoPNG) with participation of Directorate General of Hydrocarbons (DGH), Oil and Natural Gas Corporation Limited (ONGC), and the National Oil Companies and Research Institutes of India. The India National Gas Hydrate Program Expedition 01 (NGHP-01) established the presence of gas hydrate in the Krishna Godavari (KG) and Mahanadi Basins and in the offshore area of the Andaman Sea Basin. However, the gas hydrates discovered during NGHP-01 were mainly distributed as fracture-filling material in fine-grained clay-rich sediments. The India National Gas Hydrate Program Expedition 02 (NGHP-02) was carried out with an objective to discover gas hydrate in sand-rich sediment along the eastern offshore margin of India. ONGC planned and executed NGHP-02 on the behalf of the MoPNG. NGHP-02 started on March 3, 2015 and was completed on July 28, 2015 (total 147 days) using the Japanese scientific Drilling Vessel Chikyu (D/V Chikyu). During NGHP-02, 42 holes at 25 sites were drilled, cored, and/or surveyed with downhole logging tools. These sites were located in four areas along the eastern margin of India and formally named Area A (Mahanadi Basin, three sites), Area B (northern part of the KG-Basin, twelve sites), Area C (central part of the KG-Basin, six sites), and Area E (southern part to the KG-Basin, four sites). All 25 sites established during NGHP-02 were first drilled and logged with logging-while-drilling (LWD) tools and an additional 17 holes were then drilled and/or cored with conventional coring tools (HPCS/ESCS) or pressure coring tools (PCTB). Wireline logging was conducted in 10 holes and formation tests using a dual packer Modular Formation Dynamics Tester (MDT) tool were carried out in two holes. The onboard science team used the laboratory facilities on the D/V Chikyu to examine and analyse the physical properties, geochemistry, and sedimentology of all the cores collected during the expedition. Core samples were also analysed in additional post-expedition shore-based studies conducted in numerous domestic and international gas hydrate research laboratories. The NGHP-02 sediment cores were archived at the National Gas Hydrate Core Repository in Mumbai (India), which is associated with the ONGC Gas Hydrate Research and Technology Centre (GHRTC). The necessary data for characterizing the occurrence of gas hydrate, such as interstitial water chlorinities, core-derived gas chemistry, physical and sedimentological properties, thermal images of the recovered cores, pressure core and downhole measured logging data (LWD and/or conventional wireline log data), were obtained from most of the drill sites established during NGHP-02. Almost all the drill sites yielded evidence for the occurrence of gas hydrate; however, the inferred in situ concentration of gas hydrate varied substantially from site to site. For the most part, the interpretation of downhole logging data, core thermal images, interstitial water analyses, and pressure core images from the sites established during NGHP-02 indicate that the occurrence of concentrated gas hydrate is mostly associated with coarser grained (sand-rich) sediments. This paper presents the operational and technical summary of NGHP-02. NGHP-02 started on March 3, 2015 and was completed on July 28, 2015 (total 147 days) using the Japanese scientific Drilling Vessel Chikyu (D/V Chikyu). During NGHP-02, 42 holes at 25 sites were drilled, cored, and/or surveyed with downhole logging tools. These sites were located in four areas along the eastern margin of India and formally named Area A (Mahanadi Basin, three sites), Area B (northern part of the KG-Basin, twelve sites), Area C (central part of the KG-Basin, six sites), and Area E (southern part to the KG-Basin, four sites). All 25 sites established during NGHP-02 were first drilled and logged with logging-while-drilling (LWD) to

Journal of Marine and Petroleum Geology↗

USGS2019

Formation pressure and fluid flow measurements in marine gas hydrate reservoirs, NGHP-02 expedition, offshore India

Open Hole Modular Dynamic Testing (MDT) measurements were conducted in a gas hydrate-bearing sand-rich reservoir offshore India during the National Gas Hydrate Program 02 (NGHP-02) Expedition. The primary goal of this test was to obtain effective reservoir petrophysical properties in the presence of gas hydrates. The test plan included a series of pre-hydrate dissociation flow and build-up (shut-in) tests, and an attempt to dissociate gas hydrate in a sand-rich reservoir by depressurization to collect formation fluid samples and to further characterize in situ gas hydrate stability conditions. Schlumberger’s wireline MDT tool was used in a dual-packer configuration to isolate the formation being tested. This paper presents the results of the open hole MDT measurements that were conducted in Hole NGHP-02-23-C in Krishna-Godavari Basin at a water depth of 2553.5 m. The MDT dual packer test was conducted in 27 cm (10.63 in) diameter open hole section of the borehole within a 1-m interval isolated between two inflatable packers with the midpoint of the test interval at 2853.0 meter below rig floor (mbrf) (271.0 meter below sea floor (mbsf)). This was the first gas hydrate MDT test ever conducted in ultradeep water to characterize a gas hydrate reservoir system. Pre-hydrate dissociation testing was performed with a drawdown period (depressurization) of 20 minutes followed by a build-up (shut-in) of 20 minutes. The measured formation pressure was 4090.7 psia and the formation fluid (i.e., water) mobility was calculated at 1.98 mD/cP. During the second dissociation phase of the same test a maximum pressure drawdown of 840 psia was achieved; however, falling short of the 1120 psia drawdown required for dissociation. During the dissociation test the flow line pressure stabilized at a flowing pressure of 3250 psia which can be attributed to the relatively high mobility of the free water phase in the hydrate-bearing reservoir. Good quality formation pressure and near well bore mobility data was acquired that yielded a “high confidence” reservoir effective radial permeability-thickness product of 0.2 mD.m (or a horizontal effective permeability of 0.1 mD assuming a reservoir thicknees of 1.8 m) using pressure transient analysis (radial flow regime was achieved) despite unstable borehole conditions and complex operations in these shallow unconsolidated sedimentary sections.

Journal of Marine and Petroleum Geology↗

USGS2019

Preface: Marine gas hydrate reservoir systems along the eastern continental margin of India: Results of the National Gas Hydrate Program Expedition 02

The 2015 India National Gas Hydrate Program (NGHP) Expedition 02 was conducted to obtain new information on the occurrence of gas hydrate systems and to advance the understanding of geologic controls on the formation of gas hydrate accumulations in the offshore of India. The ultimate goal of the NGHP effort is to assess the energy resource potential of marine gas hydrates in India. The Guest Editors for this special thematic issue of the Journal of Marine and Petroleum Geology (JMPG) have worked with more than 100 scientists and engineers to prepare the 45 individual reports included in this special issue to address the operational and technical contributions of the NGHP-02 Expedition. This thematic issue on natural gas hydrates in the offshore of India is built on the foundation of five previous JMPG thematic issues that focused on the scientific results of other marine gas hydrate expeditions. These foundational contributions include: (1) the “Scientific Results of the 2005 USDOE-Chevron JIP Drilling for Methane Hydrates Objectives in the Gulf of Mexico” (Volume 25, Issue 9, November 2008), (2) the “Resource and Hazard Implications of Gas Hydrates in the Northern Gulf of Mexico: Results of the 2009 Joint Industry Project Leg II Drilling Expedition” (Volume 34, Issue 1, June 2012), (3) the “Scientific Results of the Second Gas Hydrate Drilling Expedition in the Ulleung Basin (UBGH2), East Sea of Korea” (Volume 47, November 2013), (4) “Geologic Implications of Gas Hydrates in the Offshore of India: Results of the National Gas Hydrate Program Expedition 01” (Volume 58, Part A, December 2014), and (5) “Gas Hydrate Drilling in Eastern Nankai” (Volume 66, Part 2, September 2015). The NGHP-02 Expedition was conducted from 03-March- 2015 to 28-July- 2015 off the eastern coast of India. The first two months of the expedition were dedicated to establishing 25 new research sites that featured the drilling of a dedicated downhole logging hole at each site. The next three months of the NGHP-02 Expedition were dedicated to sediment coring and other downhole measurement operations at 10 of the sites established during the expedition’s first phase. The results of downhole logging, coring and formation pressure testing operations during NGHP-02 have confirmed the presence of large, highly concentrated gas hydrate accumulations in coarse-grained, sand-rich depositional systems throughout large portions of the Krishna-Godavari Basin. Post expedition research and reporting efforts included collaborative analysis of the unprecedented number of shipboard acquired data sets and core samples obtained during NGHP-02. The presentation of the scientific results of the NGHP-02 Expedition has culminated in the publication of the NGHP Expedition 02 Scientific Results Volume, which is represented by this Special Issue of the Journal of Marine and Petroleum Geology. This Special Issue features a series of four reports that summarize the operational and scientific results of NGHP-02 Expedition that are presented in the 41 technical reports included this Special Issue. The first summary report, “India National Gas Hydrate Program Expedition 02: Operational and Technical Summary,” focuses on reviewing the tools and operational procedures for the NGHP-02 Expedition that led to the acquisition of an unprecedented amount of high-quality downhole logging and core data from numerous pore-filling, fracture-filling, and sediment-displacement type gas hydrate occurrences. The summary report titled “India National Gas Hydrate Program Expedition 02 Summary of Scientific Results: Gas Hydrate Systems Along the Eastern Continental Margin of India” documents gas hydrate occurrences discovered during the NGHP-02 Expedition and examines geologic controls on the gas hydrate systems along the Eastern Continental Margin of India.

Journal of Marine and Petroleum Geology↗

USGS2019

Insights from Rock-Eval analysis on the influence of sample weight on hydrocarbon generation from Lower Permian organic-matter rich rocks, West Bokaro basin, India

Among the different Rock-Eval parameters, the hydrocarbons released under S2 peak of Rock-Eval is of significance as it indicates the residual hydrocarbon content of the rock. Further, through its relationship with TOC content, it helps in calculating hydrogen indices (HI) which helps in understanding the type of organic-matter present in a rock [HI= (S2/TOC)*100]. The present study documents the role of sample weight/amount used for analysis on Rock-Eval S2 parameter for unconventional source-rock characterization. For the purpose of study, a vitrain-band sample type (manually isolated from a coal), a high-TOC shale sample type, and a carbonaceous shale sample type, were analyzed at two different particle sizes (viz. 1mm-500 microns and 212-75 microns) and different sample weights (5-15 mg for organic-matter rich rocks, and 30-60 mg for shale) using a Rock-Eval basic cycle (heating rate at 25 °C/min). Although S2 is reported as mg HC/ g rock, with increase in sample weight, an increase in hydrocarbons released under S2 peak of Rock-Eval was observed for all three sample types for both the particle sizes. The observations were further validated using a Norwegian geochemical standard (JR-1). Further, all the samples were reanalyzed by conducting pyrolysis experiments at a lower heating rate of 5 °C/min. The impact of sample weight on S2 and hydrogen index (HI) was observed to be more pronounced for the JR-1 standard (higher hydrocarbon yield) than the Types III-IV organic-matter bearing rocks. It thus calls for interpreters to be aware of the influence of mass of organic-matter on hydrocarbon generation, and to monitor the maximum S2 values of organic-matter bearing rocks, within the Flame Ionization Detector (FID) detection limits. Further, it is recommended that for Type III organic-matter bearing rocks with TOC content>20 wt %, elemental analysis should be used to derive atomic H/C and O/C ratios for Van Krevelen diagram-based kerogen typing.

West Bokaro basin↗

USGS2019

India National Gas Hydrate Program Expedition 02 Summary of Scientific Results: Gas hydrate systems along the eastern continental margin of India

The primary objectives of the India National Gas Hydrate Program Expedition 02 (NGHP-02) were to obtain new data on the occurrence of gas hydrate systems and to advance the understanding of the controls on the formation of gas hydrate accumulations in the offshore of India. In accordance with the ultimate overall goal of the NGHP effort to assess the energy resource potential of marine gas hydrates in India, particular focus was placed on the exploration and evaluation of gas hydrate occurrences at high saturations in sand-rich systems. NGHP-02 operations were conducted from 3-March-2015 to 28-July-2015 off the eastern coast of India and included logging while drilling (LWD) operations at 25 locations, and coring and wireline logging operations at 10 locations, in the Krishna-Godavari and Mahanadi Basins. The formation of highly concentrated gas hydrate accumulations, which are more suitable for energy extraction, requires the presence of relatively coarse-grained sediments with porosity needed to support the migration and accumulation of gas, and the nucleation of gas hydrate. The results of downhole logging, coring and formation pressure testing operations during NGHP-02 have confirmed the presence of extensive sand-rich depositional systems throughout the deepwater portions of the Krishna-Godavari and Mahanadi Basins. Two areas of Krishna-Godavari Basin, referred to as Areas B and C, contain substantial gas hydrate accumulations in sand-rich systems and therefore represent ideal candidate sites for future gas hydrate production testing. This summary and technical report includes a comprehensive synthesis of the geologic, geophysical, geochemical, and physical property data acquired during NGHP-02 as it relates to the controls on gas hydrate occurrence, particularly with regards to sand-hosted accumulations. In the Mahanadi Basin, despite the confirmation of extensive reservoir capacity, gas supply at the NGHP-02 sites was insufficient to charge the reservoirs with gas hydrates. In the Krishna-Godavari Basin, extensive reservoir systems were confirmed with sediment grain-sizes ranging from coarse-silts to gravels. These reservoirs range from fully- to partially filled with gas hydrate. The gas is determined to be from only microbial sources, and in part migrated into the reservoirs from deeper systems. The controls on gas hydrate occurrence are complex and varied; and include substantial reservoir heterogeneity and sufficient permeability throughout the reservoirs and seals that allowed pervasive fluid flow into and through the hydrate-bearing systems. These discoveries are the most significant confirmation of the exploration approach that focuses on direct detection of hydrate reservoirs supported by comprehensive petroleum systems analyses.

Journal of Marine and Petroleum Geology↗

USGS2018

Chevkinite-group minerals from granulite-facies metamorphic rocks and associated pegmatites of East Antarctica and South India

Electron microprobe data are presented for chevkinite-group minerals from granulite-facies rocks and associated pegmatites of the Napier Complex and Mawson Station charnockite in East Antarctica and from the Eastern Ghats, South India. Their compositions conform to the general formula for this group, viz . A 4 BC 2 D 2 Si 4 O 22 where, in the analysed specimens A = (rare-earth elements ( REE ), Ca, Y, Th), B = Fe 2+ , Mg, C = (Al, Mg, Ti, Fe 2+ , Fe 3+ , Zr) and D = Ti and plot within the perrierite field of the total Fe (as FeO) (wt.%) vs . CaO (wt.%) discriminator diagram of Macdonald and Belkin (2002). In contrast to most chevkinite-group minerals, the A site shows unusual enrichment in the MREE and HREE relative to the LREE and Ca. In one sample from the Napier Complex, Y is the dominant cation among the total REE + Y in the A site, the first reported case of Y-dominance in the chevkinite group. The minerals include the most Al-rich yet reported in the chevkinite group (≤9.15 wt.% Al 2 O 3 ), sufficient to fill the C site in two samples. Conversely, the amount of Ti in these samples does not fill the D site, and, thus, some of the Al could be making up the deficiency at D , a situation not previously reported in the chevkinite group. Fe abundances are low, requiring Mg to occupy up to 45% of the B site. The chevkinite-group minerals analysed originated from three distinct parageneses: (1) pegmatites containing hornblende and orthopyroxene or garnet; (2) orthopyroxene-bearing gneiss and granulite; (3) highly aluminous paragneisses in which the associated minerals are relatively magnesian or aluminous. Chevkinite-group minerals from the first two parageneses have relatively high FeO content and low MgO and Al 2 O 3 contents; their compositions plot in the field for mafic and intermediate igneous rocks. In contrast, chevkinite-group minerals from the third paragenesis are notably more aluminous and have greater Mg/Fe ratios

Antactica↗

USGS2018

National Gas Hydrate Program Expedition 01 offshore India; gas hydrate systems as revealed by hydrocarbon gas geochemistry

The National Gas Hydrate Program Expedition 01 (NGHP-01) targeted gas hydrate accumulations offshore of the Indian Peninsula and along the Andaman convergent margin. The primary objectives of coring were to understand the geologic and geochemical controls on the accumulation of methane hydrate and their linkages to underlying petroleum systems. Four areas were investigated: 1) the Kerala-Konkan Basin in the eastern Arabian Sea, 2) the Mahanadi and 3) Krishna-Godavari Basins in the western Bay of Bengal, and 4) the Andaman forearc Basin in the Andaman Sea. Upward flux of methane at three of the four of the sites cored during NGHP-01 is apparent from the presence of seafloor mounds, seismic evidence for upward gas migration, shallow sub-seafloor geochemical evidence of methane oxidation, and near-seafloor gas composition that resembles gas from depth. The Kerala-Konkan Basin well contained only CO 2 with no detectable hydrocarbons suggesting there is no gas hydrate system here. Gas and gas hydrate from the Krishna-Godavari Basin is mainly microbial methane with δ 13 C values ranging from −58.9 to −78.9‰, with small contributions from microbial ethane (−52.1‰) and CO 2 . Gas from the Mahanadi Basin was mainly methane with lower concentrations of C 2 -C 5 hydrocarbons (C 1 /C 2 ratios typically >1000) and CO 2 . Carbon isotopic compositions that ranged from −70.7 to −86.6‰ for methane and −62.9 to −63.7‰ for ethane are consistent with a microbial gas source; however deeper cores contained higher molecular weight hydrocarbon gases suggesting a small contribution from a thermogenic gas source. Gas composition in the Andaman Basin was mainly methane with lower concentrations of ethane to isopentane and CO 2, C 1 /C 2 ratios were mainly >1000 although deeper samples were <1000. Carbon isotopic compositions range from −65.2 to −80.7‰ for methane, −53.1 to −55.2‰ for ethane is consistent with mainly microbial gas sources, although one value recorded of −35.4‰ for propane suggests a thermogenic source. Gas hydrate accumulations in the Krishna-Godavari and Mahanadi Basins are the result of a microbially sourced gas hydrate system. The system is enhanced by the migration of microbial gas from surrounding areas through pathways including high-porosity delta sands, shale diapirism, faulting and folding of sediment due to the local processes associated with rapid sediment deposition, sediment overpressure, and the recycling of methane from a rapidly upward moving gas hydrate stability zone. The gas hydrate system in the Andaman Basin is less well constrained due to lack of exploration and occurs in a forearc basin. Each of these hydrate-bearing systems overlies and is likely supported by the presence and possible migration of gas from deeper gas-prone petroleum systems currently generating thermogenic hydrocarbons at much greater depths.

Marine and Petroleum Geology↗

USGS2018

Salinity tolerance of non-native suckermouth armoured catfish (Loricariidae: Pterygoplichthys sp.) from Kerala, India

Loricariid catfishes of the genus Pterygoplichthys are native to South America and have been introduced in many localities around the world. They are freshwater fishes, but may also use low-salinity habitats such as estuaries for feeding or dispersal. Here we report results of a field survey and salinity-tolerance experiments for a population of Pterygoplichthys sp. collected in Kerala, India. In both chronic and acute salinity-tolerance trials, fish were able to withstand salinities up to 12 ppt with no mortality; however, fish transferred to salinities > 12 ppt did not survive. The experimental results provide evidence that nonnative Pterygoplichthys sp. are able to tolerate mesohaline conditions for extended periods, and can easily invade the brackish water ecosystems of the state. Further, Pterygoplichthys sp. from Kerala have greater salinity tolerance than other congeners. These data are vital to predicting the invasion of non-native fishes such as Pterygoplichthys spp. into coastal systems in Kerala and worldwide. This is particularly important as estuarine ecosystems are under threat of global climate change and sea-level rise. In light of the results of the present study and considering the reports of negative impacts of the species in invaded water bodies, management authorities may consider controlling populations and/or instituting awareness programmes to prevent the spread of this nuisance aquatic invasive species in Kerala.

Kerala↗