Geology Reports⌕ Search

Geology topics

Thomas L. Pratt

Publications and source records attributed to Thomas L. Pratt.

At least 37 records · Page 2Linked to original sources
USGS2018

Mw 4.2 Delaware Earthquake of 30 November 2017

The 30 November 2017 Delaware earthquake with magnitude MW 4.2 occurred beneath the northeastern tip of the Delmarva Peninsula near Dover, Delaware. The earthquake and its aftershocks provide an opportunity to evaluate seismicity in a passive margin setting using much improved coverage by high-quality permanent broadband seismometers at regional distance ranges in the central and eastern United States. This is the largest instrumentally recorded earthquake in Delaware and triggered a collaborative rapid-response effort by seismologists at five institutions along the mid-Atlantic. As a result of this effort, eighteen portable seismographs were deployed in the epicentral region within 24 hours of the mainshock. High-quality seismic recordings at over 380 permanent regional broadband seismographic stations in the eastern United States show a remarkably small decrease in amplitude with distance between 800-2000 km. The mainshock focal mechanism shows predominantly strike-slip motion with a significant thrust component. The orientation of the subhorizontal P-axis is consistent with that of earthquakes in the nearby Reading-Lancaster seismic zone in Pennsylvania, but are rotated counter-clockwise about 45º from that of the MW 5.8 Mineral, Virginia earthquake. We detected small aftershocks below the normal event detection threshold by using a waveform cross-correlation detection method. This demonstrated the effectiveness of this approach for earthquake studies and hazard evaluation in the eastern United States. Based on their waveform similarities, repeating earthquakes with magnitudes greater than 1.5 are detected in 2010, 2015, and 2017. While there is a large time interval between events, 5 years and 2.2 years respectively, the events occur within a spatially tight cluster located near the 2017 Dover DE earthquake mainshock.

Delaware↗
USGS2018

Characterizing and imaging sedimentary strata using depth-converted spectral ratios: An example from the Atlantic Coastal Plain of the Eastern U.S.

Unconsolidated, near-surface sediments can have a profound influence on the amplitudes and frequencies of ground shaking during earthquakes, and these effects should be accounted for when using amplitude observations for seismic hazard assessments. This study explores methods to use teleseismic arrivals recorded on linear receiver arrays to characterize widespread, shallow sedimentary deposits, including estimation of the velocities, determination of the fundamental resonance peaks, and imaging of the major reflectors. The examples used are the extensive Atlantic Coastal Plain (ACP) and associated Mississippi Embayment (ME) strata of the Central and Eastern United States. The large contrast in material properties at the bedrock surface beneath these sediments produces a strong fundamental resonance peak in the 0.2 to 4 Hz frequency range, which is estimated here by computing spectral ratios at each receiver site relative to bedrock sites at the ends of the receiver arrays. Sediment thicknesses derived from published contour maps made from drill hole data allow for the computation of average velocities to match the observed frequencies of resonance peaks with theoretical values at each receiver site, with the sloping bedrock surface allowing for computation of an average velocity versus depth function if horizontal layers are assumed. The velocity function is then used to convert the spectral ratios from frequency to depth, resulting in an image of the subsurface similar to that of a seismic reflection profile. The results demonstrate the use of teleseismic signals for characterizing and imaging shallow sedimentary strata.

Atlantic Coastal Plain↗
USGS2017

Amplification of earthquake ground motions in Washington, DC, and implications for hazard assessments in central and eastern North America

The extent of damage in Washington, DC, from the 2011 M w 5.8 Mineral, VA, earthquake was surprising for an epicenter 130 km away; U.S. Geological Survey “Did-You-Feel-It” reports suggest that Atlantic Coastal Plain and other unconsolidated sediments amplified ground motions in the city. We measure this amplification relative to bedrock sites using earthquake signals recorded on a temporary seismometer array. The spectral ratios show strong amplification in the 0.7 to 4 Hz frequency range for sites on sediments. This range overlaps with resonant frequencies of buildings in the city as inferred from their heights, suggesting amplification at frequencies to which many buildings are vulnerable to damage. Our results emphasize that local amplification can raise moderate ground motions to damaging levels in stable continental regions, where low attenuation extends shaking levels over wide areas and unconsolidated deposits on crystalline metamorphic or igneous bedrock can result in strong contrasts in near-surface material properties.

Washington, DC↗
USGS2017

The story of a Yakima fold and how it informs Late Neogene and Quaternary backarc deformation in the Cascadia subduction zone, Manastash anticline, Washington, USA

The Yakima folds of central Washington, USA, are prominent anticlines that are the primary tectonic features of the backarc of the northern Cascadia subduction zone. What accounts for their topographic expression and how much strain do they accommodate and over what time period? We investigate Manastash anticline, a north vergent fault propagation fold typical of structures in the fold province. From retrodeformation of line- and area-balanced cross sections, the crust has horizontally shortened by 11% (0.8–0.9 km). The fold, and by inference all other folds in the fold province, formed no earlier than 15.6 Ma as they developed on a landscape that was reset to negligible relief following voluminous outpouring of Grande Ronde Basalt. Deformation is accommodated on two fault sets including west-northwest striking frontal thrust faults and shorter north to northeast striking faults. The frontal thrust fault system is active with late Quaternary scarps at the base of the range front. The fault-cored Manastash anticline terminates to the east at the Naneum anticline and fault; activity on the north trending Naneum structures predates emplacement of the Grande Ronde Basalt. The west trending Yakima folds and west striking thrust faults, the shorter north to northeast striking faults, and the Naneum fault together constitute the tectonic structures that accommodate deformation in the low strain rate environment in the backarc of the Cascadia Subduction Zone.

Washington↗
USGS2017

A decade of induced slip on the causative fault of the 2015 Mw 4.0 Venus earthquake, northeast Johnson County, Texas

On 7 May 2015, a M w 4.0 earthquake occurred near Venus, northeast Johnson County, Texas, in an area of the Bend Arch-Fort Worth Basin that reports long-term, high-volume wastewater disposal and that has hosted felt earthquakes since 2009. In the weeks following the M w 4.0 earthquake, we deployed a local seismic network and purchased nearby active-source seismic reflection data to capture additional events, characterize the causative fault, and explore potential links between ongoing industry activity and seismicity. Hypocenter relocations of the resulting local earthquake catalog span ~4–6 km depth and indicate a fault striking ~230 ° , dipping to the west, consistent with a nodal plane of the M w 4.0 regional moment tensor. Fault plane solutions indicate normal faulting, with B axes striking parallel to maximum horizontal compressive stress. Seismic reflection data image the reactivated basement fault penetrating the Ordovician disposal layer and Mississippian production layer, but not displacing post-Lower Pennsylvanian units. Template matching at regional seismic stations indicates that low-magnitude earthquakes with similar waveforms began in April 2008, with increasing magnitude over time. Pressure data from five saltwater disposal wells within 5 km of the active fault indicate a disposal formation that is 0.9–4.8 MPa above hydrostatic. We suggest that the injection of 28,000,000 m 3 of wastewater between 2006 and 2015 at these wells led to an increase in subsurface pore fluid pressure that contributed to inducing this long-lived earthquake sequence. The 2015 M w 4.0 event represents the largest event in the continuing evolution of slip on the causative fault.

Texas↗
USGS2017

Accelerating slip rates on the puente hills blind thrust fault system beneath metropolitan Los Angeles, California, USA

Slip rates represent the average displacement across a fault over time and are essential to estimating earthquake recurrence for proba-bilistic seismic hazard assessments. We demonstrate that the slip rate on the western segment of the Puente Hills blind thrust fault system, which is beneath downtown Los Angeles, California (USA), has accel-erated from ~0.22 mm/yr in the late Pleistocene to ~1.33 mm/yr in the Holocene. Our analysis is based on syntectonic strata derived from the Los Angeles River, which has continuously buried a fold scarp above the blind thrust. Slip on the fault beneath our field site began during the late-middle Pleistocene and progressively increased into the Holocene. This increase in rate implies that the magnitudes and/or the frequency of earthquakes on this fault segment have increased over time. This challenges the characteristic earthquake model and presents an evolving and potentially increasing seismic hazard to metropolitan Los Angeles.

California↗
USGS2016

Seismic imaging beneath an InSAR anomaly in eastern Washington State: Shallow faulting associated with an earthquake swarm in a low-hazard area

In 2001, a rare swarm of small, shallow earthquakes beneath the city of Spokane, Washington, caused ground shaking as well as audible booms over a five‐month period. Subsequent Interferometric Synthetic Aperture Radar (InSAR) data analysis revealed an area of surface uplift in the vicinity of the earthquake swarm. To investigate the potential faults that may have caused both the earthquakes and the topographic uplift, we collected ∼3 km of high‐resolution seismic‐reflection profiles to image the upper‐source region of the swarm. The two profiles reveal a complex deformational pattern within Quaternary alluvial, fluvial, and flood deposits, underlain by Tertiary basalts and basin sediments. At least 100 m of arching on a basalt surface in the upper 500 m is interpreted from both the seismic profiles and magnetic modeling. Two west‐dipping faults deform Quaternary sediments and project to the surface near the location of the Spokane fault defined from modeling of the InSAR data.

Washington↗
USGS2016

Observations and modeling of fjord sedimentation during the 30 year retreat of Columbia Glacier, AK

To explore links between glacier dynamics, sediment yields and the accumulation of glacial sediments in a temperate setting, we use extensive glaciological observations for Columbia Glacier, Alaska, and new oceanographic data from the fjord exposed during its retreat. High-resolution seismic data indicate that 3.2 × 10 8 m 3 of sediment has accumulated in Columbia Fjord over the past three decades, which corresponds to ~5 mm a −1 of erosion averaged over the glaciated area. We develop a general model to infer the sediment-flux history from the glacier that is compatible with the observed retreat history, and the thickness and architecture of the fjord sediment deposits. Results reveal a fivefold increase in sediment flux from 1997 to 2000, which is not correlated with concurrent changes in ice flux or retreat rate. We suggest the flux increase resulted from an increase in the sediment transport capacity of the subglacial hydraulic system due to the retreat-related steepening of the glacier surface over a known subglacial deep basin. Because variations in subglacial sediment storage can impact glacial sediment flux, in addition to changes in climate, erosion rate and glacier dynamics, the interpretation of climatic changes based on the sediment record is more complex than generally assumed.

Alaska↗
USGS2015

Examination of the Reelfoot Rift Petroleum System, south-central United States, and the elements that remain for potential exploration and development

The Reelfoot rift is one segment of a late Proterozoic(?) to early Paleozoic intracontinental rift complex in the south-central United States. The rift complex is situated beneath Mesozoic to Cenozoic strata of the Mississippi embayment of southeastern Missouri, northeastern Arkansas, and western Tennessee and Kentucky. The rift portion of the stratigraphic section consists primarily of synrift Cambrian and Ordovician strata, capped by a postrift sag succession of Late Ordovician to Cenozoic age. Potential synrift source rocks have been identified in the Cambrian Elvins Shale. Thermal maturity of Paleozoic strata within the rift ranges from the oil window to the dry gas window. Petroleum generation in Elvins source rocks likely occurred during the middle to late Paleozoic. Upper Cretaceous sedimentary rocks unconformably overlie various Paleozoic units and define the likely upper boundary of the petroleum system. No production has been established in the Reel-foot rift. However, at least nine of 22 exploratory wells have reported petroleum shows, mainly gas shows with some asphalt or solid hydrocarbon residue. Regional seismic profiling shows the presence of two large inversion structures (Blytheville arch and Pascola arch). The Blytheville arch is marked by a core of structurally thickened Elvins Shale, whereas the Pascola arch reflects the structural uplift of a portion of the entire rift basin. Structural uplift and faulting within the Reelfoot rift since the late Paleozoic appear to have disrupted older conventional hydrocarbon traps and likely spilled any potential conventional petroleum accumulations. The remaining potential resources within the Reelfoot rift are likely shale gas accumulations within the Elvins Shale; however, reservoir continuity and porosity as well as pervasive faulting appear to be significant future challenges for explorers and drillers.

GCSSEPM Foundation Perkins-Rosen Research Conferen↗
USGS2015

Kinematics of shallow backthrusts in the Seattle fault zone, Washington State

Near-surface thrust fault splays and antithetic backthrusts at the tips of major thrust fault systems can distribute slip across multiple shallow fault strands, complicating earthquake hazard analyses based on studies of surface faulting. The shallow expression of the fault strands forming the Seattle fault zone of Washington State shows the structural relationships and interactions between such fault strands. Paleoseismic studies document an ∼7000 yr history of earthquakes on multiple faults within the Seattle fault zone, with some backthrusts inferred to rupture in small (M ∼5.5–6.0) earthquakes at times other than during earthquakes on the main thrust faults. We interpret seismic-reflection profiles to show three main thrust faults, one of which is a blind thrust fault directly beneath downtown Seattle, and four small backthrusts within the Seattle fault zone. We then model fault slip, constrained by shallow deformation, to show that the Seattle fault forms a fault propagation fold rather than the alternatively proposed roof thrust system. Fault slip modeling shows that back-thrust ruptures driven by moderate (M ∼6.5–6.7) earthquakes on the main thrust faults are consistent with the paleoseismic data. The results indicate that paleoseismic data from the back-thrust ruptures reveal the times of moderate earthquakes on the main fault system, rather than indicating smaller (M ∼5.5–6.0) earthquakes involving only the backthrusts. Estimates of cumulative shortening during known Seattle fault zone earthquakes support the inference that the Seattle fault has been the major seismic hazard in the northern Cascadia forearc in the late Holocene.

Washington↗
USGS2015

Paleoseismologic evidence for large-magnitude (M w 7.5-8.0) earthquakes on the Ventura blind thrust fault: Implications for multifault ruptures in the Transverse Ranges of southern California

Detailed analysis of continuously cored boreholes and cone penetrometer tests (CPTs), high-resolution seismic-reflection data, and luminescence and 14 C dates from Holocene strata folded above the tip of the Ventura blind thrust fault constrain the ages and displacements of the two (or more) most recent earthquakes. These two earthquakes, which are identified by a prominent surface fold scarp and a stratigraphic sequence that thickens across an older buried fold scarp, occurred before the 235-yr-long historic era and after 805 ± 75 yr ago (most recent folding event[s]) and between 4065 and 4665 yr ago (previous folding event[s]). Minimum uplift in these two scarp-forming events was ∼6 m for the most recent earthquake(s) and ∼5.2 m for the previous event(s). Large uplifts such as these typically occur in large-magnitude earthquakes in the range of M w 7.5–8.0. Any such events along the Ventura fault would likely involve rupture of other Transverse Ranges faults to the east and west and/or rupture downward onto the deep, low-angle décollements that underlie these faults. The proximity of this large reverse-fault system to major population centers, including the greater Los Angeles region, and the potential for tsunami generation during ruptures extending offshore along the western parts of the system highlight the importance of understanding the complex behavior of these faults for probabilistic seismic hazard assessment.

California↗
USGS2015

Landslides and megathrust splay faults captured by the late Holocene sediment record of eastern Prince William Sound, Alaska

We present new marine seismic‐reflection profiles and bathymetric maps to characterize Holocene depositional patterns, submarine landslides, and active faults beneath eastern and central Prince William Sound (PWS), Alaska, which is the eastern rupture patch of the 1964 Mw 9.2 earthquake. We show evidence that submarine landslides, many of which are likely earthquake triggered, repeatedly released along the southern margin of Orca Bay in eastern PWS. We document motion on reverse faults during the 1964 Great Alaska earthquake and estimate late Holocene slip rates for these growth faults, which splay from the subduction zone megathrust. Regional bathymetric lineations help define the faults that extend 40–70 km in length, some of which show slip rates as great as 3.75  mm/yr. We infer that faults mapped below eastern PWS connect to faults mapped beneath central PWS and possibly onto the Alaska mainland via an en echelon style of faulting. Moderate (Mw>4) upper‐plate earthquakes since 1964 give rise to the possibility that these faults may rupture independently to potentially generate Mw 7–8 earthquakes, and that these earthquakes could damage local infrastructure from ground shaking. Submarine landslides, regardless of the source of initiation, could generate local tsunamis to produce large run‐ups along nearby shorelines. In a more general sense, the PWS area shows that faults that splay from the underlying plate boundary present proximal, perhaps independent seismic sources within the accretionary prism, creating a broad zone of potential surface rupture that can extend inland 150 km or more from subduction zone trenches.

Alaska↗
USGS2015

Thin‐ or thick‐skinned faulting in the Yakima fold and thrust belt (WA)? Constraints from kinematic modeling of the saddle mountains anticline

The Yakima fold and thrust belt (YFTB) deforms the Columbia River Basalt Group flows of Washington State. The YFTB fault geometries and slip rates are crucial parameters for seismic‐hazard assessments of nearby dams and nuclear facilities, yet there are competing models for the subsurface fault geometry involving shallowly rooted versus deeply rooted fault systems. The YFTB is also thought to be analogous to the evenly spaced wrinkle ridges found on other terrestrial planets. Using seismic reflection data, borehole logs, and surface geologic data, we tested two proposed kinematic end‐member thick‐ and thin‐skinned fault models beneath the Saddle Mountains anticline of the YFTB. Observed subsurface geometry can be produced by 600–800 m of heave along a single listric‐reverse fault or ∼3.5 km of slip along two superposed low‐angle thrust faults. Both models require decollement slip between 7 and 9 km depth, resulting in greater fault areas than sometimes assumed in hazard assessments. Both models require initial slip much earlier than previously thought and may provide insight into the subsurface geometry of analogous comparisons to wrinkle ridges observed on other planets.

Washington↗
USGS2015

Focused exhumation along megathrust splay faults in Prince William Sound, Alaska

Megathrust splay faults are a common feature of accretionary prisms and can be important for generating tsunamis during some subduction zone earthquakes. Here we provide new evidence from Alaska that megathrust splay faults have been conduits for focused exhumation in the last 5 Ma. In most of central Prince William Sound, published and new low-temperature thermochronology data indicate little to no permanent rock uplift over tens of thousands of earthquake cycles. However, in southern Prince William Sound on Montague Island, apatite (U–Th)/He ages are as young as 1.1 Ma indicating focused and rapid rock uplift. Montague Island lies in the hanging wall of the Patton Bay megathrust splay fault system, which ruptured during the 1964 M9.2 earthquake and produced ∼9 m of vertical uplift. Recent geochronology and thermochronology studies show rapid exhumation within the last 5 Ma in a pattern similar to the coseismic uplift in the 1964 earthquake, demonstrating that splay fault slip is a long term (3–5 my) phenomena. The region of slower exhumation correlates with rocks that are older and metamorphosed and constitute a mechanically strong backstop. The region of rapid exhumation consists of much younger and weakly metamorphosed rocks, which we infer are mechanically weak. The region of rapid exhumation is separated from the region of slow exhumation by the newly identified Montague Strait Fault. New sparker high-resolution bathymetry, seismic reflection profiles, and a 2012 M w 4.8 earthquake show this feature as a 75-km-long high-angle active normal fault. There are numerous smaller active normal(?) faults in the region between the Montague Strait Fault and the splay faults. We interpret this hanging wall extension as developing between the rapidly uplifting sliver of younger and weaker rocks on Montague Island from the essentially fixed region to the north. Deep seismic reflection profiles show the splay faults root into the subduction megathrust where there is probable underplating. Thus the exhumation and extension in the hanging wall are likely driven by underplating along the megathrust décollement, thickening in the overriding plate and a change in rheology at the Montague Strait Fault to form a structural backstop. A comparison with other megathrust splay faults around the world shows they have significant variability in their characteristics, and the conditions for their formation are not particularly unique.

Alaska↗
USGS2015

The 2011 Virginia M5.8 earthquake: Insights from seismic reflection imaging into the influence of older structures on eastern U.S. seismicity

The Mineral, Virginia (USA), earthquake of 23 August 2011 occurred at 6– 8 km depth within the allochthonous terranes of the Appalachian Piedmont Province, rupturing an ~N36°E striking reverse fault dipping ~50° southeast. This study used the Interstate Highway 64 seismic refl ection profi le acquired ~6 km southwest of the hypocenter to examine the structural setting of the earthquake. The profi le shows that the 2011 earthquake and its aftershocks are almost entirely within the early Paleozoic Chopawamsic volcanic arc terrane, which is bounded by listric thrust faults dipping 30°–40° southeast that sole out into an ~2-km-thick, strongly refl ective zone at 7– 12 km depth. Refl ectors above and below the southward projection of the 2011 earthquake focal plane do not show evidence for large displacement, and the updip projection of the fault plane does not match either the location or trend of a previously mapped fault or lithologic boundary. The 2011 earthquake thus does not appear to be a simple reactivation of a known Paleozoic thrust fault or a major Mesozoic rift basin-boundary fault. The fault that ruptured appears to be a new fault, a fault with only minor displacement, or to not extend the ~3 km from the aftershock zone to the seismic profi le. Although the Paleozoic structures appear to infl uence the general distribution of seismicity in the area, Central Virginia seismic zone earthquakes have yet to be tied directly to specifi c fault systems mapped at the surface or imaged on seismic profiles.

Virginia↗
USGS2014

Structure and seismic hazard of the Ventura Avenue anticline and Ventura fault, California: Prospect for large, multisegment ruptures in the Western Transverse Ranges

The Ventura Avenue anticline is one of the fastest uplifting structures in southern California, rising at ∼5 mm/yr. We use well data and seismic reflection profiles to show that the anticline is underlain by the Ventura fault, which extends to seismogenic depth. Fault offset increases with depth, implying that the Ventura Avenue anticline is a fault‐propagation fold. A decrease in the uplift rate since ∼30±10 ka is consistent with the Ventura fault breaking through to the surface at that time and implies that the fault has a recent dip‐slip rate of ∼4.4–6.9 mm/yr. To the west, the Ventura fault and fold trend continues offshore as the Pitas Point fault and its associated hanging wall anticline. The Ventura–Pitas Point fault appears to flatten at about 7.5 km depth to a detachment, called the Sisar decollement, then step down on a blind thrust fault to the north. Other regional faults, including the San Cayetano and Red Mountain faults, link with this system at depth. We suggest that below 7.5 km, these faults may form a nearly continuous surface, posing the threat of large, multisegment earthquakes. Holocene marine terraces on the Ventura Avenue anticline suggest that it grows in discrete events with 5–10 m of uplift, with the latest event having occurred ∼800 years ago ( Rockwell, 2011 ). Uplift this large would require large earthquakes ( M w 7.7–8.1) involving the entire Ventura/Pitas Point system and possibly more structures along strike, such as the San Cayetano fault. Because of the local geography and geology, such events would be associated with significant ground shaking amplification and regional tsunamis.

California↗
USGS2013

Megathrust splay faults at the focus of the Prince William Sound asperity, Alaska

High-resolution sparker and crustal-scale air gun seismic reflection data, coupled with repeat bathymetric surveys, document a region of repeated coseismic uplift on the portion of the Alaska subduction zone that ruptured in 1964. This area defines the western limit of Prince William Sound. Differencing of vintage and modern bathymetric surveys shows that the region of greatest uplift related to the 1964 Great Alaska earthquake was focused along a series of subparallel faults beneath Prince William Sound and the adjacent Gulf of Alaska shelf. Bathymetric differencing indicates that 12 m of coseismic uplift occurred along two faults that reached the seafloor as submarine terraces on the Cape Cleare bank southwest of Montague Island. Sparker seismic reflection data provide cumulative Holocene slip estimates as high as 9 mm/yr along a series of splay thrust faults within both the inner wedge and transition zone of the accretionary prism. Crustal seismic data show that these megathrust splay faults root separately into the subduction zone décollement. Splay fault divergence from this megathrust correlates with changes in midcrustal seismic velocity and magnetic susceptibility values, best explained by duplexing of the subducted Yakutat terrane rocks above Pacific plate rocks along the trailing edge of the Yakutat terrane. Although each splay fault is capable of independent motion, we conclude that the identified splay faults rupture in a similar pattern during successive megathrust earthquakes and that the region of greatest seismic coupling has remained consistent throughout the Holocene.

Alaska↗