Geology topics

Michael L. Zientek

Publications and source records attributed to Michael L. Zientek.

At least 37 records · Page 2Linked to original sources

USGS2016

Relationship between porphyry systems, crustal preservation levels, and amount of exploration in magmatic belts of the Central Tethys Region

Tectonic, geologic, geochemical, geochronologic, and ore deposit data from the U.S. Geological Survey-led assessment of 26 porphyry belts identified in the central Tethys region of Turkey, the Caucasus, Iran, western Pakistan, and southern Afghanistan relate porphyry mineralization to the tectonomagmatic evolution of the region and associated subduction and postsubduction processes. However, uplift, erosion, subsidence, and burial of porphyry systems, as well as post-mineral deformation, also played an essential role in shaping the observed metallogenic patterns. We present a methodology that systematically evaluates the relationship between the level of erosion, the extent of cover, and the number of known porphyry occurrences in porphyry belts. Porphyry belts that exhibit coeval volcanic-to-plutonic rock aerial ratios between 33 and 66 and limited cover contain numerous identified porphyry occurrences. These belts are relatively well explored because porphyry systems are not eroded or buried. Porphyry belts with volcanic-to-plutonic ratios that are greater than 66, but are modestly covered, contain fewer identified porphyry occurrences. Current exploration in these belts is increasingly identifying porphyry systems under associated epithermal deposits. Porphyry belts that show volcanic-to-plutonic ratios that are greater than 66, but are extensively covered, contain few identified porphyry occurrences. These belts have not been extensively explored but have potential for discoveries under cover. Deformed porphyry belts exhibit variable volcanic-to-plutonic ratios that are typically below 33, but can be as high as 60. Commonly, these deformed belts are extensively covered. Exploration efforts for porphyry deposits in these variably exhumed belts have been limited. Exploration has resulted in the identification of 62.7 million tonnes (Mt) of copper, 2.0 Mt of molybdenum, and 4.200 t of gold in the 45 porphyry deposits contained in the 26 porphyry belts of the region: (1) 54.7 Mt of copper (87% of total), 1.74 Mt of molybdenum (87%), and 3,370 t of gold (80%) occur in the 25 deposits of the four porphyry belts that exhibit coeval volcanic-to-plutonic ratios between 33 and 66 and limited cover; (2) 5.44 Mt of copper (9%), 0.148 Mt of molybdenum (7%), and 581 t of gold (14%) are contained in the 11 deposits of the 11 porphyry belts that display volcanic-to-plutonic ratios greater than 66 and modest cover; (3) 2.08 Mt of copper (3%), 0.110 Mt of molybdenum (6%), and 244 t of gold (6%) occur in the seven deposits of the three porphyry belts that have volcanic-to-plutonic ratios that are greater than 66 and extensive cover; and (4) 0.388 Mt of copper (1%), 0.006 Mt of molybdenum (<<1%), and 6 t of gold (<<1%) are contained in the two deposits of the eight deformed and covered porphyry belts with variable but typically low volcanic-to-plutonic ratios. The central Tethys region is receiving considerable exploration attention. It hosts the Kadjaran (4.6 Mt Cu), Sungun (5.1 Mt Cu), Sar Cheshmeh (8.9 Mt Cu), and Reko Diq (23.0 Mt Cu) world-class porphyry deposits. Continued exploration for porphyry deposits in the region will likely lead to new discoveries in known porphyry belts, particularly under cover and below high- and intermediate-sulfidation epithermal systems.

Caucasus, central Tethys region↗

USGS2015

Qualitative assessment of selected areas of the world for undiscovered sediment-hosted stratabound copper deposits: Chapter Y in Global mineral resource assessment

A qualitative mineral resource assessment of sediment-hosted stratabound copper mineralized areas for undiscovered copper deposits was performed for 10 selected areas of the world. The areas, in alphabetical order, are (1) Belt-Purcell Basin, United States and Canada; (2) Benguela and Cuanza Basins, Angola; (3) Chuxiong Basin, China; (4) Dongchuan Group rocks, China; (5) Egypt–Israel–Jordan Rift, Egypt, Israel, and Jordan; (6) Maritimes Basin, Canada; (7) Neuquén Basin, Argentina; (8) Northwest Botswana Rift, Botswana and Namibia; (9) Redstone Copperbelt, Canada; and (10) Salta Rift System, Argentina. This assessment (1) outlines the main characteristics of the areas, (2) classifies known deposits by deposit model subtypes, and (3) ranks the areas according to their potential to contain undiscovered copper deposits. An analytic hierarchy process (AHP) was used to rank assessment areas according to their potential for undiscovered copper deposits. Once the main characteristics of each area were compiled (age of host rock, geologic setting, stratigraphy, host lithology, deposit subtype(s), known deposits and occurrences, and mineral system components), three criteria (mineralization, extent of study area, and lithostratigraphic framework, each with multiple subcriteria) were scored for all assessment areas. Relative weights and scores were assigned to all criteria by three geologists. In addition, the assessment areas were ranked for comparison exclusively on the basis of professional opinion. The AHP and professional opinion lists are similar but not the same. Both the professional opinion and the cumulative AHP lists rate the Northwest Botswana Rift in Botswana and Namibia as the area most likely to contain the most undiscovered copper deposits. The Salta Rift System in Argentina is rated lowest among the 10 qualitatively assessed areas.

Belt-Purcell Basin, Benguela Basin, Cuanza Basin, ↗

USGS2015

Porphyry copper assessment of the Tethys region of western and southern Asia: Chapter V in Global mineral resource assessment

A probabilistic mineral resource assessment of undiscovered resources in porphyry copper deposits in the Tethys region of western and southern Asia was carried out as part of a global mineral resource assessment led by the U.S. Geological Survey (USGS). The purpose of the study was to delineate geographic areas as permissive tracts for the occurrence of porphyry copper deposits at a scale of 1:1,000,000 and to provide probabilistic estimates of amounts of copper likely to be contained in undiscovered porphyry copper deposits in those tracts. The team did the assessment using the USGS three-part form of mineral resource assessment, which is based on (1) mineral deposit and grade-tonnage models constructed from known deposits as analogs for undiscovered deposits, (2) delineation of permissive tracts based on geoscientific information, and (3) estimation of numbers of undiscovered deposits. The assessment area includes the Asian part of Turkey and Georgia, Armenia, Azerbaijan, Iran, western Pakistan, and southwestern Afghanistan. Selected tracts also extend marginally into southwesternmost Russia and northeasternmost Iraq. This region is located in the central part of the larger Tethyan Eurasian Metallogenic Belt, which extends from western Europe to eastern Asia. Mining in this part of the Tethyan Eurasian Metallogenic Belt has occurred for thousands of years; in 2011 the region produced 420,000 metric tons (t) of copper (2.6 percent of global production), 8,300 t of molybdenum (3 percent), and 29,600 kilograms of gold (1 percent). The assessment team defined 26 tracts permissive for Late Triassic to Holocene porphyry copper-molybdenum and porphyry copper-gold deposits. Permissive tracts range in extent from 2,960 to 194,000 square kilometers (km 2 ) and cover a total area of 924,000 km 2 . Younger tracts overlap older tracts in several areas. Three permissive tracts include sub-tracts in order to separate tract segments on the basis of geography, data quality, or likelihood of occurrence of undiscovered deposits. About 65 percent of all known porphyry sites occur in only five tracts, which also host most of the identified copper resources. In terms of tectonic setting, 58 percent of the permissive tracts are related to continental arcs; 19 percent to island arcs or back arcs; and 24 percent to postcollisional settings. Of the known porphyry copper deposits, subequal fractions are spread among these three settings. The spatial distribution of known porphyry deposits and prospects is also related to the level of erosion. Magmatic belts with numerous known porphyry sites exhibit subequal areas of coeval plutonic and volcanic units and lesser amounts of cover rocks. Belts with fewer known porphyry sites display either high or low volcanic-to-plutonic ratios and (or) greater cover, indicating crustal levels that are too shallow or too deep for exposure of porphyry deposits. Probabilistic estimates of numbers of undiscovered porphyry copper deposits were made for 18 of the 26 tracts. The undiscovered porphyry copper endowment for 8 tracts is discussed qualitatively. The assessment estimates that the Tethys region contains 47 undiscovered deposits within 1 kilometer of the surface. Probabilistic estimates of numbers of undiscovered deposits were combined with grade and tonnage models in a Monte Carlo simulation to estimate probable amounts of contained metal. The 47 undiscovered deposits are estimated to contain a mean of 180 million metric tons (Mt) of copper distributed among the 18 tracts for which probabilistic estimates were made, in addition to the 62 Mt of copper already identified in the 42 known porphyry deposits in the study area. Results of Monte Carlo simulations show that 80 percent of the estimated undiscovered porphyry copper resources in the Tethys region are located in four tracts or sub-tracts.

Scientific Investigations Report↗

USGS2015

Assessment of undiscovered copper resources associated with the Permian Kupferschiefer, Southern Permian Basin, Europe

This study synthesizes available information and estimates the location and quantity of undiscovered copper associated with a late Permian bituminous shale, the Kupferschiefer, of the Southern Permian Basin in Europe. The purpose of this study is to (1) delineate permissive areas (tracts) where undiscovered reduced-facies sediment-hosted stratabound copper deposits could occur within 2.5 kilometers of the surface, (2) provide a database of known reduced-facies-type sediment-hosted stratabound copper deposits and significant prospects, and (3) provide probabilistic estimates of amounts of undiscovered copper that could be present within each tract. This assessment is a contribution to a global assessment conducted by the U.S. Geological Survey (USGS). Permissive tracts are delineated by mapping the extent of the Kupferschiefer that overlies reservoir-facies red beds of the lower Permian Rotliegend Group. More than 78 million metric tons (Mt) of copper have been produced or delineated as resources in the assessed tracts, with more than 90 percent of the known mineral endowment located in Poland. Mines in Poland are developing the deposit at depths ranging from about 500 to 1,400 meters. Two approaches are used to estimate in-situ amounts of undiscovered copper. The three-part form of assessment was applied to the entire study area. In this approach, numbers of undiscovered deposits are estimated and combined with tonnage-grade models to probabilistically forecast the amount of undiscovered copper. For Poland, drill-hole data were available, and Gaussian geostatistical simulation techniques were used to probabilistically estimate the amount of undiscovered copper. The assessment was done in September 2010 using a three-part form of mineral resource assessment and in January 2012 using Gaussian geostatistical simulation. Using the three-part form of assessment, a mean of 126 Mt of undiscovered copper is predicted in 4 assessed permissive tracts. Seventy-five percent of the mean amount of undiscovered copper (96 Mt) is associated with a tract in southwest Poland. For this same permissive tract in Poland, Gaussian geostatistical simulation techniques indicate a mean of 62 Mt of copper based on copper surface-density data from drill holes.

Scientific Investigations Report↗

USGS2014

Estimate of undiscovered copper resources of the world, 2013

Using a geology-based assessment methodology, the U.S. Geological Survey estimated a mean of 3,500 million metric tons (Mt) of undiscovered copper among 225 tracts around the world. Annual U.S. copper consumption is 2 Mt; global consumption is 20 Mt. The USGS assessed undiscovered copper in two deposit types that account for about 80 percent of the world's copper supply. Results of the assessment are provided by deposit type for 11 regions. Approximately 50 percent of the global total occurs in South America, South Central Asia and Indochina, and North America combined.

Fact Sheet↗

USGS2014

Platinum-group elements: So many excellent properties

The platinum-group elements (PGE) include platinum, palladium, rhodium, ruthenium, iridium, and osmium. These metals have similar physical and chemical properties and occur together in nature. The properties of PGE, such as high melting points, corrosion resistance, and catalytic qualities, make them indispensable to many industrial applications. PGE are strategic and critical materials for many nations because they are essential for important industrial applications but are mined in a limited number of places and have no adequate substitutes. Exploration and mining companies have found approximately 104,000 metric tons of PGE (with minor gold) in mineral deposits around the world that could be developed. For PGE, almost all known production and resources are associated with three geologic features: the Bushveld Complex, a layered mafic-to-ultramafic intrusion in South Africa; the Great Dyke, a layered mafic-to-ultramafic intrusion in Zimbabwe; and sill-like intrusions associated with flood basalts in the Noril’sk-Talnakh area, Russia. To help predict where PGE supplies might be located, USGS scientists study how and where PGE resources are concentrated in the Earth's crust and use that knowledge to assess the likelihood that undiscovered PGE deposits may exist. Techniques used for assessing mineral resources were developed by the USGS to support the stewardship of Federal lands and evaluate mineral resource availability in a global context. The USGS also compiles statistics and information on the worldwide supply, demand, and flow of PGE. These data are all used to inform U.S. national policymakers.

Fact Sheet↗

USGS2014

Porphyry copper assessment of eastern Australia

The U.S. Geological Survey (USGS) conducts national and global assessments of resources (mineral, energy, water, and biologic) to provide science in support of decision making. Mineral resource assessments provide syntheses of available information about where mineral deposits are known and suspected to occur in the Earth’s crust and which commodities may be present, together with estimates of amounts of resources that may be present in undiscovered deposits. The USGS collaborated with geologists of the Geological Survey of New South Wales and Geoscience Australia (formerly the Australian Geological Survey Organisation) on an assessment of Phanerozoic-age porphyry copper resources in Australia. Porphyry copper deposits contain about 11 percent of the identified copper resources in Australia. This study addresses resources of known porphyry copper deposits and expected resources of undiscovered porphyry copper deposits in eastern Australia. A three-part form of assessment was used for estimation of undiscovered resources. Using this method, four tracts were delineated that are permissive for porphyry copper deposits. A probabilistic estimate of the expected number of deposits in each tract was prepared on the basis of existing information about geology, geochemistry, geophysics, exploration history, and mineral occurrences. Monte Carlo simulation was used to combine the estimated number of deposits with an appropriate model of grade and tonnage for porphyry copper deposits to provide a probabilistic estimate of metal content and total tonnage for undiscovered deposits. The Delamerian permissive tract comprises igneous rocks of Cambrian age in the Delamerian Orogen, which borders the western margin of the Tasmanides. The Delamerian tract contains no known porphyry copper deposits, but the Adelaide sub-tract, one of three sub-tracts that compose the Delamerian tract, contains four porphyry copper prospects. The Adelaide sub-tract is estimated to contain 2.5±2.2 undiscovered deposits in an area of about 50,700 square kilometers. The Macquarie permissive tract comprises volcanic, volcaniclastic, and minor exposed intrusive igneous rocks of the Macquarie Arc. The nine known deposits in this tract are now estimated to contain a total of about 13.5 million metric tons of copper and 1,700 metric tons of gold. This tract is estimated to contain 6.9±3.5 undiscovered deposits for a total of about 16 deposits in an area of about 41,500 square kilometers. The Yeoval permissive tract includes subequal areas of permissive volcanic and intrusive rocks of Silurian to Devonian age exposed in and around the Cowra-Buchan Rift System, which overlaps the previously accreted Macquarie Arc. The Yeoval tract contains one porphyry copper deposit and several porphyry copper prospects. This tract is estimated to contain 1.3±0.75 undiscovered porphyry copper deposits, for a total of about 2 expected deposits in an area of about 53,200 square kilometers. The East Tasmanide permissive tract includes a semi-continuous belt of plutonic and subordinate volcanic rocks along the eastern margins of Queensland and northeastern New South Wales. The East Tasmanide tract contains 14 known porphyry copper deposits and many porphyry copper prospects, which are all in the Central sub-tract. This sub-tract is expected to contain 4.8±3.3 undiscovered porphyry copper deposits, for a total of about 19 deposits in an area of about 291,000 square kilometers. This assessment estimates that 15 undiscovered deposits contain an arithmetic mean of ~21 million metric tons or more of copper in four tracts, in addition to the 24 known porphyry copper deposits that contain identified resources of ~16 million metric tons of copper. In addition to copper, the mean expected amount of undiscovered byproduct gold predicted by the simulation is ~1,500 metric tons. The probability associated with these arithmetic means is on the order of 30 percent. Median expected amounts of metals predicted by the simulations may be ~50 percent lower than mean estimates.

Scientific Investigations Report↗

USGS2014

Assessment of undiscovered sandstone copper deposits of the Kodar-Udokan area, Russia

Mineral resource assessments integrate and synthesize available information as a basis for estimating the location, quality, and quantity of undiscovered mineral resources. This probabilistic mineral resource assessment of undiscovered sandstone copper deposits within Paleoproterozoic metasedimentary rocks of the Kodar-Udokan area in Russia is a contribution to a global assessment led by the U.S. Geological Survey (USGS). The purposes of this study are to (1) delineate permissive areas (tracts) to indicate where undiscovered sandstone-hosted copper deposits may occur within 2 km of the surface, (2) provide a database of known sandstone copper deposits and significant prospects, (3) estimate numbers of undiscovered deposits within these permissive tracts at several levels of confidence, and (4) provide probabilistic estimates of amounts of copper (Cu) and mineralized rock that could be contained in undiscovered deposits within each tract. The workshop for the assessment, held in October 2009, used a three-part form of mineral resource assessment as described by Singer (1993) and Singer and Menzie (2010). Permissive tracts were delineated by estimating the volume of rock that contains the stratigraphic section ranging from the Chitkanda to the Sakukan Formations of the Udokan Complex to a depth of 2 km and then projecting this rock volume to the surface. The six permissive tracts delineated in this assessment occur in several domains, referred to as troughs in Russian literature, which represent remnants of a much larger basin that likely covered the Kodar-Udokan region. Tracts range in size from about 100 km 2 to 800 km 2 . The mapped distributions of rocks as shown on 1:200,000-scale geologic maps, supplemented in some areas by prospect mapping and drilling, were used to delineate the tracts. In this study area, data are insufficient to constrain the original basin geometry or the structural or stratigraphic traps that would have localized copper mineralization. Some alteration is described, and the types of sandstone cements vary; however, no patterns are known that provide evidence for regional flow paths of metal-bearing brines that could localize deposits. This probabilistic assessment indicates that a significant amount of undiscovered copper is associated with sediment-hosted stratabound copper deposits in the Kodar-Udokan Trough. In the assessment, a mean of 21 undiscovered deposits is estimated to occur within the Kodar-Udokan area. There are two known deposits in the area that contain drill-identified resources of 19.6 million metric tons of copper. Using Monte Carlo simulation, probabilistic estimates of the numbers of undiscovered sandstone copper deposits for these tracts were combined with tonnage and grade distributions of sandstone copper deposits to forecast an arithmetic mean of 20.6 million metric tons of undiscovered copper. Significant value can be expected from associated metals, particularly silver.

Scientific Investigations Report↗

USGS2014

Porphyry copper assessment of western Central Asia

The U.S. Geological Survey conducted an assessment of resources associated with porphyry copper deposits in the western Central Asia countries of Kyrgyzstan, Uzbekistan, Kazakhstan, and Tajikistan and the southern Urals of Kazakhstan and Russia as part of a global mineral resource assessment. The purpose of the study was to (1) delineate permissive areas (tracts) for undiscovered porphyry copper deposits; (2) compile a database of known porphyry copper deposits and significant prospects; (3) where data permit, estimate numbers of undiscovered deposits within those permissive tracts; and (4) provide probabilistic estimates the amounts of copper (Cu), molybdenum (Mo), gold (Au), and silver (Ag) that could be contained in those undiscovered deposits. Western Central Asia, a region diverse in its geologic complexity, is situated north of the Tarim and North China tectonic blocks and sandwiched between the East European and Siberian cratons. The Ural Mountains form the western margin of the region; the southern margin is formed by the high-standing ranges that make up the Tian Shan mountain range in the border regions of Kazakhstan, Kyrgyzstan, and western China, where the effects of collisional tectonics are well displayed. The tectonic collage that makes up the core of western Central Asia is perhaps the geologically least understood part of the region. There is broad agreement that the early Paleozoic is made up of tectonically juxtaposed blocks that vary from Precambrian-cored microcontinents to magmatic arc and related complexes to subduction-related accretionary complexes. The rudiments of an incipient, contiguous single Kazakhstan block were formed by the end of the Silurian. In the middle to late Paleozoic, the block was unconformably superposed by two large, nested magmatic-arc belts, one Devonian, the other Carboniferous. Both magmatic-arc complexes were folded into a horseshoe-shaped, southeast-opening orocline in response to the final collisions of the various surrounding cratonic blocks with the Kazakhstan block. Additional deformation in the upper Cenozoic derived from the collision of India and China significantly redistributed fragments of the various mosaicked blocks, particularly in the central and southern parts of the western Central Asian region. Porphyry copper deposits are associated with many of the magmatic-arc fragments and belts throughout the geologically complex region, and economically important deposits are found in arc sequences of all Paleozoic Periods. The economically most productive arcs are Carboniferous. The assessment includes a discussion of the tectonic and geologic setting of porphyry copper deposits in western Central Asia (chapter 1), an application of remote sensing data for hydrothermal alteration mapping as a tool for porphyry copper assessment in the region (chapter 2), and a probabilistic assessment of undiscovered porphyry copper resources in four areas that represent Ordovician and Late Paleozoic (Carboniferous-Permian) magmatic arcs (chapter 3). The principal litho-tectonic terrane concept used to delineate permissive tracts was that of a magmatic arc that formed in the subduction boundary zone above a subducting plate. Eight permissive tracts are delineated on the basis of mapped and inferred subsurface distributions of igneous rocks assigned to magmatic arcs of specified age ranges that define areas where the occurrence of porphyry copper deposits within 1 kilometer of the Earth’s surface is possible. These tracts range in area from about 8,000 to 200,000 square kilometers and host 18 known porphyry copper deposits that contain about 54 million metric tons of copper. Available data included geologic maps, the distribution of significant porphyry copper occurrences and potentially related deposit types, the distribution of hydrothermal alteration patterns that are consistent with porphyry copper mineralization, and information on possible subsurface extensions of permissive rocks. On the basis of analyses of these data, the assessment team estimated a mean of 25 undiscovered porphyry copper deposits for the study area. Estimates of numbers of undiscovered deposits were combined with grade and tonnage models in a Monte Carlo simulation to yield a mean estimate of 95 million metric tons of copper in undiscovered porphyry copper deposits; this represents about twice the amount of identified porphyry copper resources (54 million metric tons). Detailed descriptions of each permissive tract, including the rationales for delineation and assessment, are given in appendixes, along with a geographic information system (GIS) that includes permissive tract boundaries, point locations of known porphyry copper deposits and significant occurrences, and hydrothermal alteration data based on analysis of remote sensing data.

Ural Mountains↗

USGS2014

Porphyry copper assessment of East and Southeast Asia: Philippines, Taiwan (Republic of China), Republic of Korea (South Korea), and Japan

The U.S. Geological Survey collaborated with member countries of the Coordinating Committee for Geoscience Programmes in East and Southeast Asia (CCOP) on an assessment of the porphyry copper resources of East and Southeast Asia as part of a global mineral resource assessment. The assessment covers the Philippines in Southeast Asia, and the Republic of Korea (South Korea), Taiwan (Province of China), and Japan in East Asia. The Philippines host world class porphyry copper deposits, such as the Tampakan and Atlas deposits. No porphyry copper deposits have been discovered in the Republic of Korea (South Korea), Taiwan (Province of China), or Japan. Thirteen geographic areas were delineated as tracts that are permissive for porphyry copper deposits in the assessed area. Individual tracts range from about 3,000 to 100,000 square kilometers in area. Permissive tracts are delineated on the basis of mapped distributions of igneous rocks of specific age ranges that define subduction-related magmatic arcs or magmatic belts that might contain porphyry copper deposits. Most of these magmatic arcs are subduction related, although some porphyry deposits and prospects are present in back-arc or poorly understood tectonic settings. Maps at various scales were used in the compilation; however, the final tract boundaries are intended for use at a scale of 1:1,000,000. Numbers of undiscovered deposits were estimated at different levels of confidence for 10 permissive tracts in the Philippines including one area that extends to eastern Taiwan (Republic of China); permissive tracts in South Korea and Japan are discussed qualitatively. Estimates of numbers of undiscovered deposits were combined with grade and tonnage models using Monte Carlo simulation to estimate amounts of undiscovered resources. Grades and tonnages of known porphyry copper deposits in the study area were compared with global grade and tonnage models to determine the appropriate model for simulation of undiscovered resources. Most of the known deposits are best described as copper-gold subtypes of porphyry copper deposits. For some permissive tracts, a general porphyry copper-gold-molybdenum model was used. Thirty-eight porphyry copper deposits are known in the Philippines; the mean number of undiscovered deposits was estimated to be 28. Mean (arithmetic) resources that could be associated with the undiscovered deposits are 90 million metric tons of copper and 5,800 metric tons of gold, as well as byproduct molybdenum and silver. Additional resources that could be discovered in extensions to known deposits were not evaluated. Assessment results, presented in tables and graphs, indicate expected amounts of total contained metal and mineralized rock in undiscovered deposits at different quantile levels, as well as the arithmetic mean for each tract. The Philippines have a long history of porphyry exploration cycles and mine development, interrupted at times by political and social unrest, environmental concerns, and natural disasters. Changes in mining laws within the region and the recent high price of gold on the world market have prompted renewed interest in porphyry copper deposits in the region. South Korea and Japan have been thoroughly explored for many types of mineral deposits. Available data suggest that the permissive rocks in South Korea typically are too deeply eroded to preserve porphyry copper deposits. Porphyry copper systems may be present in Japan, but are likely to lie at depths greater than the 1 kilometer from the surface protocol adopted for this study. Descriptions of the geologic basis for delineating each tract, the data used, the geologic criteria and rationale for the assessment, and results of the assessment are included in appendixes along with the description of a geographic information system (GIS) that includes tract boundaries, known porphyry copper deposits and significant prospects, and assessment results.

Scientific Investigations Report↗

USGS2014

Platinum-group elements in southern Africa: mineral inventory and an assessment of undiscovered mineral resources

The platinum-group elements, platinum, palladium, rhodium, ruthenium, iridium, and osmium, possess unique physical and chemical characteristics that make them indispensable to modern technology and industry. However, mineral deposits that are the main sources of these elements occur only in three countries in the world, raising concerns about potential disruption in mineral supply. Using information in the public domain, mineral resource and reserve information has been compiled for mafic and ultramafic rocks in South Africa and Zimbabwe that host most of the world’s platinum-group element resources. As of 2012, exploration and mining companies have delineated more than 20 billion metric tons of mineralized rock containing 42,000 metric tons of platinum, 29,000 metric tons of palladium, and 5,200 metric tons of rhodium, primarily in mafic and ultramafic intrusions of the Bushveld Complex and the Great Dyke, in southern Africa. Additional mineralized rock is likely to occur in extensions to the well-explored and characterized volumes of mineralized rock. Underexplored extensions of stratabound platinum-group element (PGE) deposits in the Bushveld Complex in South Africa may contain 65,000 metric tons of platinum, palladium, and rhodium to a depth of 3 km. Rocks enriched in PGE, which occur near the contact of the Bushveld Complex with older Transvaal Supergroup sedimentary rocks, may contain 1,100 metric tons of platinum and 1,370 metric tons of palladium (mean estimate to a depth of 1 km). A stratabound platinum-group element deposit in the Great Dyke in Zimbabwe may contain 6,900 metric tons of undiscovered platinum, palladium, and rhodium. By comparison, the global net demand for PGE in 2012 was approximately 460 metric tons. Since the 1920s, mining has recovered 7,200 and 107 metric tons of platinum-group elements from the Bushveld Complex and the Great Dyke, respectively. The large layered intrusions in southern Africa—the Bushveld Complex and the Great Dyke—are now and will continue to be a major source of the world’s supply of PGE. Mining will not deplete the identified mineral resources and reserves or potential undiscovered mineral resources for many decades; however, in the near-term, PGE supply could be affected by social, environmental, political, and economic factors.

Southern Africa↗

USGS2014

Sandstone copper assessment of the Teniz Basin, Kazakhstan

The U.S. Geological Survey (USGS) conducts national and global resource assessments (mineral, energy, water, and biological) to provide data and scientific analyses to support decision making. Three-part mineral resource assessments result in informed, unbiased, quantitative, and probabilistic estimates of undiscovered mineral resources and deposits. In particular, mineral assessment results inform decisions concerning land-use and mineral-resource development. A probabilistic mineral resource assessment of the sandstone subtype of sediment-hosted stratabound copper deposits in the Teniz Basin, Kazakhstan, was undertaken by the USGS. The Teniz Basin is located in Akmola Oblast, central and western Kazakhstan. With an areal extent of almost 78,000 km 2 , the basin contains many sediment-hosted stratabound copper prospects, none of which are well described, and the majority of which may belong to the sandstone subtype of sediment-hosted copper deposits. There are no known locations within the Teniz Basin currently mined for copper. Within the basin, however, map units permissive for the sandstone subtype of sediment-hosted stratabound copper deposits include (from oldest to youngest): the Middle Carboniferous Kiery Suite; the Middle to Upper Carboniferous Vladimirov Suite (a stratigraphic equivalent of the Dzhezkazgan Suite, Chu-Sarysu Basin); and the Upper Carboniferous or lowest Permian Kayraktin Suite. The multicolored sedimentary rocks of the Vladimirov Suite, in which 14 potentially ore-bearing horizons of gray beds have been recorded, have the greatest potential for undiscovered, sandstone subtype, sediment-hosted stratabound copper deposits. A quantitative mineral resource assessment has been completed that (1) delineates one 49,714 km 2 tract permissive for undiscovered, sandstone subtype, sediment-hosted stratabound copper deposits, and (2) provides probabilistic estimates of numbers of undiscovered deposits and probable amounts of copper resource contained in those deposits. The permissive tract delineated in this assessment encompasses no previously known sandstone subtype, sediment-hosted stratabound copper deposits. However, this assessment estimates (with 30 percent probability) that a mean of nine undiscovered sandstone subtype copper deposits may be present in the Teniz Basin and could contain a mean total of 8.9 million metric tons of copper and 7,500 metric tons of silver.

Teniz Basin↗

USGS2014

Sediment-hosted stratabound copper assessment of the Neoproterozoic Roan Group, central African copperbelt, Katanga Basin, Democratic Republic of the Congo and Zambia

This study estimates the location, quality, and quantity of undiscovered copper in stratabound deposits within the Neoproterozoic Roan Group of the Katanga Basin in the Democratic Republic of the Congo and Zambia. The study area encompasses the Central African Copperbelt, the greatest sediment-hosted copper-cobalt province in the world, containing 152 million metric tons of copper in greater than 80 deposits. This study (1) delineates permissive areas (tracts) where undiscovered sediment-hosted stratabound copper deposits may occur within 2 kilometers of the surface, (2) provides a database of known sediment-hosted stratabound copper deposits and prospects, (3) estimates numbers of undiscovered deposits within these permissive tracts at several levels of confidence, and (4) provides probabilistic estimates of amounts of copper and mineralized rock that could be contained in undiscovered deposits within each tract. The assessment, conducted in January 2010 using a three-part form of mineral resource assessment, indicates that a substantial amount of undiscovered copper resources might occur in sediment-hosted stratabound copper deposits within the Roan Group in the Katanga Basin. Monte Carlo simulation results that combine grade and tonnage models with estimates of undiscovered deposits indicate that the mean estimate of undiscovered copper in the study area is 168 million metric tons, which is slightly greater than the known resources at 152 million metric tons. Furthermore, significant value can be expected from associated metals, particularly cobalt. Tracts in the Democratic Republic of the Congo (DRC) have potential to contain near-surface, undiscovered deposits. Monte Carlo simulation results indicate a mean value of 37 million metric tons of undiscovered copper may be present in significant prospects.

Katanga Basin↗

USGS2014

A geologic and mineral exploration spatial database for the Stillwater Complex, Montana

The Stillwater Complex is a Neoarchean, ultramafic to mafic layered intrusion exposed in the Beartooth Mountains in south-central Montana. This igneous intrusion contains magmatic mineralization that is variably enriched in strategic and critical commodities such as chromium, nickel, and the platinum-group elements. One deposit, the J-M Reef, is the sole source of primary production and reserves for platinum-group elements in the United States. A large amount of information has been collected on the Stillwater Complex. In the 1930s, academics, the U.S. Geological Survey, and the [U.S.] Bureau of Mines initiated geologic investigations on the Stillwater Complex. Since that time, more than 600 publications on the Stillwater Complex have appeared in the scientific literature. Exploration and mining companies have collected even more information since the 1920s. This report provides essential spatially referenced datasets based on geologic mapping and mineral exploration activities conducted from the 1920s to the 1990s. This information will facilitate research on the complex and provide background material needed to explore for mineral resources and to develop sound land-management policy.

Montana↗

USGS2013

Porphyry copper assessment of Southeast Asia and Melanesia: Chapter D in Global mineral resource assessment

The U.S. Geological Survey collaborated with member countries of the Coordinating Committee for Geoscience Programmes in East and Southeast Asia (CCOP) on an assessment of the porphyry copper resources of Southeast Asia and Melanesia as part of a global mineral resource assessment. The region hosts world-class porphyry copper deposits and underexplored areas that are likely to contain undiscovered deposits. Examples of known porphyry copper deposits include Batu Hijau and Grasberg in Indonesia; Panguna, Frieda River, and Ok Tedi in Papua New Guinea; and Namosi in Fiji. This assessment covers the countries of Cambodia, Indonesia, Lao People’s Democratic Republic, Malaysia, Myanmar, Papua New Guinea, Singapore, Thailand, and parts of southeastern China, India, the Solomon Islands, Vanuatu, and Fiji. Twenty-two geographic areas were delineated as tracts that are permissive for porphyry copper deposits in Southeast Asia. Permissive tracts are grouped into four broadly defined geographic/geologic areas, as follows: (1) the Indochina Peninsula area, (2) Indonesian and Malaysian Islands, (3) New Guinea Island and Papuan New Guinea islands, and (4) Melanesia. Individual tracts range from less than 1,000 to more than 350,000 square kilometers in area. Permissive tracts are based on mapped and inferred subsurface (<1 kilometer depth) distributions of igneous rocks of specific age ranges that define magmatic arcs and magmatic belts that are likely to contain porphyry copper deposits. Most of these magmatic arcs are subduction-related, although some have porphyry-style deposits occurring in postcollisional and (or) poorly understood tectonic settings. Although maps at a variety of different scales were used in the compilation, the final tract boundaries are intended for use at a scale of 1:1,000,000. Global grade and tonnage models for porphyry copper deposits were evaluated. Most of the known deposits are best described as fitting the copper-gold (Cu-Au) subtype of porphyry copper deposit. For some permissive tracts, a general porphyry copper-gold-molybdenum (Cu-Au-Mo) model was used. Assessment participants estimated numbers of undiscovered deposits at different levels of confidence for most of the permissive tracts. These estimates were combined with grade and tonnage models using a Monte Carlo simulation to estimate undiscovered resources. Additional resources in extensions of deposits with identified resources were not evaluated. Assessment results, presented in tables and graphs, show mean amounts of metal and mineralized rock in undiscovered deposits at different quantile levels, as well as the arithmetic mean for each tract. This assessment estimated a mean of 89 undiscovered porphyry copper deposits for the assessed permissive tracts in Southeast Asia and Melanesia. About 288 million metric tons (Mt) of copper and 18,000 metric tons (t) of gold, as well as byproduct molybdenum and silver, could be associated with undiscovered deposits. This represents about four times the number of deposits with identified resources (23) already discovered in Southeast Asia; reliable reported identified resources for those 23 deposits total 84 Mt of copper and 6,000 t of gold. Eleven permissive tracts have no known porphyry copper deposits with reported resources. Three of those 11 tracts lacked sufficient information for a probabilistic assessment and are discussed in qualitative terms. On a regional basis, both the Indochina Peninsula area and the Indonesian-Malaysian Islands area are estimated to contain about 10 times as much in place copper in undiscovered porphyry copper deposits as has been identified to date. For the New Guinea Island areas, the ratio of undiscovered to identified copper resources is about 2. Some parts of the region have a long history of porphyry exploration cycles and mine development, interrupted at times by political and social unrest, environmental concerns, and natural disasters. Changes in mining laws within the region and the recent high price of gold on the world market have prompted renewed interest in porphyry copper deposits in Southeast Asia and Melanesia. However, predicted undiscovered deposits may not be found, and if found, may not be developed. This assessment includes an overview of the assessment results with summary tables. Detailed descriptions of each tract are included in appendixes, with estimates of numbers of undiscovered deposits, and probabilistic estimates of amounts of copper, molybdenum, gold, and silver that could be contained in undiscovered deposits for each permissive tract. A geographic information system (GIS) that accompanies the report includes tract boundaries and a database of known porphyry copper deposits and significant prospects.

Scientific Investigations Report↗

USGS2013

Descriptive models, grade-tonnage relations, and databases for the assessment of sediment-hosted copper deposits: with emphasis on deposits in the Central Africa Copperbelt, Democratic Republic of the Congo and Zambia: Chapter J in Global mineral resource assessment

The Central African Copperbelt (CACB) is one of the most important copper-producing regions of the world. The majority of copper produced in Africa comes from this region defined by the Neoproterozoic Katanga sedimentary basin of the southern Democratic Republic of the Congo (DRC) and northern Zambia. Copper in the CACB is mined from sediment-hosted stratabound copper deposits associated with red beds and includes the giant deposits in the Kolwezi and Tenge-Fungurume districts in the DRC and the Konkola-Musoshi and Nchanga-Chingola districts in Zambia. In recent years, sediment-hosted structurally controlled replacement and vein (SCRV) copper deposits, such as the giant Kansanshi deposit in Zambia have become important exploration targets in the CACB region. In 2011, the CACB accounted for 7.2 percent of the estimated global mine production of copper. Global production of copper is principally derived from porphyry and sediment-hosted copper deposits (57 and 23 percent, respectively). Almost 50 percent of the copper known to exist in sediment-hosted deposits (past production plus identified resources) is contained in the CACB, 25 percent is contained in the Zechstein Basin of northern Europe, and the remainder is contained in an additional 29 sedimentary basins distributed around the globe. The U.S. Geological Survey (USGS) led an assessment of undiscovered copper resources in the CACB as part of a global mineral resource assessment for undiscovered resources of potash, copper, and platinum-group elements in selected mineral deposit types. As part of the assessment process, available data for the CACB were compiled and evaluated. This report describes the results of that work, including new descriptive mineral-deposit and grade and tonnage models and spatial databases for deposits and occurrences, ore bodies and open pits. Chapter 1 of this report summarizes a descriptive model of sediment-hosted stratabound copper deposits. General characteristics and subtypes of sediment-hosted stratabound copper deposits are described based upon worldwide examples. Chapter 2 provides a global database of 170 sediment-hosted copper deposits, along with a statistical evaluation of grade and tonnage data for stratabound deposits, a comparison of stratabound deposits in the CACB with those found elsewhere, a discussion of the distinctive characteristics of the subtypes of sediment-hosted copper deposits that occur within the CACB, and guidelines for using grade and tonnage distributions for assessment of undiscovered resources in sediment-hosted stratabound deposits in the CACB. Chapter 3 presents a new descriptive model of sediment-hosted structurally controlled replacement and vein (SCRV) copper deposits with descriptions of individual deposits of this type in the CACB and elsewhere. Appendix A describes a relational database of tonnage, grade, and other information for more than 100 sediment-hosted copper deposits in the CACB. These data are used to calculate the pre-mining mineral endowment for individual deposits in the CACB and serve as the basis for the grade and tonnage models presented in chapter 2. Appendix B describes three spatial databases (Esri shapefiles) for (1) point locations of more than 500 sediment-hosted copper deposits and prospects, (2) projected surface extent of 86 selected copper ore bodies, and (3) areal extent of 77 open pits, all within the CACB.

Scientific Investigations Report↗

USGS2013

Tectono-magmatic evolution and distribution of porphyry Cu systems in the Central Tethys Region of Turkey, the Caucasus, Iran, and southern Pakistan

Recent compilation of geodynamic, geochemical, geochronologic, and ore deposits data provided an opportunity to review the continental margin, intra-oceanic, and post-collisional tectonic settings in the Central Tethys Region. These settings formed during sequential rifting of microcontinents from the passive margin of Gondwana, their northward transport across the Neo-Tethys Ocean, and their collision with the active margin of Eurasia.

Tethys region↗

USGS2012

Magmatic ore deposits in layered intrusions - Descriptive model for reef-type PGE and contact-type Cu-Ni-PGE deposits

Layered, ultramafic to mafic intrusions are uncommon in the geologic record, but host magmatic ore deposits containing most of the world's economic concentrations of platinum-group elements (PGE) (figs. 1 and 2). These deposits are mined primarily for their platinum, palladium, and rhodium contents (table 1). Magmatic ore deposits are derived from accumulations of crystals of metallic oxides, or immiscible sulfide, or oxide liquids that formed during the cooling and crystallization of magma, typically with mafic to ultramafic compositions. "PGE reefs" are stratabound PGE-enriched lode mineralization in mafic to ultramafic layered intrusions. The term "reef" is derived from Australian and South African literature for this style of mineralization and used to refer to (1) the rock layer that is mineralized and has distinctive texture or mineralogy (Naldrett, 2004), or (2) the PGE-enriched sulfide mineralization that occurs within the rock layer. For example, Viljoen (1999) broadly defined the Merensky Reef as "a mineralized zone within or closely associated with an unconformity surface in the ultramafic cumulate at the base of the Merensky Cyclic Unit." In this report, we will use the term PGE reef to refer to the PGE-enriched mineralization, not the host rock layer. Within a layered igneous intrusion, reef-type mineralization is laterally persistent along strike, extending for the length of the intrusion, typically tens to hundreds of kilometers. However, the mineralized interval is thin, generally centimeters to meters thick, relative to the stratigraphic thickness of layers in an intrusion that vary from hundreds to thousands of meters. PGE-enriched sulfide mineralization is also found near the contacts or margins of layered mafic to ultramafic intrusions (Iljina and Lee, 2005). This contact-type mineralization consists of disseminated to massive concentrations of iron-copper-nickel-PGE-enriched sulfide mineral concentrations in zones that can be tens to hundreds of meters thick. The modes and textures of the igneous rocks hosting the mineralization vary irregularly on the scale of centimeters to meters; autoliths and xenoliths are common. Mineralization occurs in the igneous intrusion and in the surrounding country rocks. Mineralization can be preferentially localized along contact with country rocks that are enriched in sulfur-, iron-, or CO2-bearing lithologies. Reef-type and contact-type deposits, in particular those in the Bushveld Complex, South Africa, are the world's primary source of platinum and rhodium (tables 2 and 3; fig. 2). Reef-type PGE deposits are mined only in the Bushveld Complex (Merensky Reef and UG2), the Stillwater Complex (J-M Reef), and the Great Dyke (Main Sulphide Layer). PGE-enriched contact-type deposits are only mined in the Bushveld Complex. The other deposits in tables 2 and 3 are undeveloped; some are still under exploration.

Open-File Report↗