Geology topics

Michael L. Zientek

Publications and source records attributed to Michael L. Zientek.

At least 19 recordsLinked to original sources

USGS2025

Petrogenesis and mineralization potential of the Bradley Peak komatiitic basalts, Wyoming Province

The ca. 2.72 Ga Bradley Peak greenstone terrane in the Wyoming Province contains spinifex- and cumulate-textured komatiitic volcanic rocks that may host Ni-Cu-PGE sulfide mineralization. New whole rock geochemistry classifies these rocks as Al-undepleted komatiitic basalts derived from a parental melt with ~17 wt. % MgO. Isotopic data (Sm-Nd, Re-Os) and REE profiles suggest a plume source and possible assimilation of juvenile footwall volcanic rocks. Calculated sulfur concentrations at sulfide saturation and low-detection PGE geochemistry indicate these magmas did not saturate a sulfide liquid resulting in sulfide mineralization. Although the Bradley Peak komatiitic basalt flows are unlikely to host magmatic sulfide mineralization, they are likely the source of Au for regional orogenic gold deposits.

Wyoming↗

USGS2023

Electromagnetic and magnetic imaging of the Stillwater Complex, Montana, USA

Modelling and analysis of helicopter electromagnetic data result in resistivity and susceptibility models and derivatives of magnetic data that characterise shallow parts of the Stillwater Complex, critical for aiding exploration and expansion of globally scarce critical and battery mineral resources that include platinum group elements, nickel, copper and chromium. The magnetic susceptibly models derived from the electromagnetic data and the tilt derivative of the magnetic data image layering, mafic dikes, banded iron formation, and serpentinised peridotite. Known areas with contact-type mineralisation are generally characterised by low resistivities and susceptibilities where the volume of mineralised rock is large and/or the depth is shallow. We use iso-cluster and edge detection analysis of both resistivities and susceptibilities to identify potential mineralisation in poorly characterised regions as well as faults. Low resistivity layers beneath large landslides reflect water saturated porous slip surfaces which can interfere with drilling. This uncommon approach of tightly linking the resistivity and susceptibility models and magnetic anomaly data to rock property, surficial geologic, drill hole and soil geochemistry data to image the geology in the upper ∼100 m, aids identification of prospective mineralised regions as well landslides and faults that can impact mineral exploration and local hazards.

Montana↗

USGS2022

A novel origin for PGE reefs: A case study of the J-M Reef

The origin of meter scale stratiform layers of disseminated sulfides in enriched platinum group element (PGE) tenors and grades, called reef-type deposits, are the world’s most significant source of PGEs. Their origin in layered mafic intrusions remains debated, but in general, most researchers favor an orthomagmatic origin for reef-type deposits and agree that their formation requires the equilibration of an immiscible sulfide liquid with a significantly larger mass of silicate magma (i.e., silicate:sulfide mass ratios of 104 to 106). However, where, and how this chemical equilibration process takes place in the magmatic system is poorly constrained. In this contribution, we propose a new model for the origin of PGE reef deposits. We demonstrate that finely disseminated, resident sulfide liquid hosted within cumulate mush can be upgraded by incoming batches of S-undersaturated and PGE-undepleted silicate melt. We demonstrate this model through a case study of the J-M Reef deposit of the Stillwater Complex, the world’s highest-grade PGE deposit (14 ppm Pd over 1.8 m).

Conference Paper↗

USGS2022

The geochemical and textural transition between the Reef Package and its hanging wall, Stillwater Complex, Montana, USA

The highest grade Pd-Pt deposit on Earth, the J-M Reef, is hosted in coarse-grained to pegmatoidal cumulates called the Reef Package. Decades of mine development of the J-M Reef have revealed that a distinct discontinuity in rock fabric marks the top of the rock unit that hosts economic-grade sulfide mineralization. Mine geologists refer to this discontinuity as the hanging wall contact. This contact is the top of the Reef Package and is always locatable—either by the change in rock fabric or by distinctive hanging wall textures of silicate minerals—even when the reef sulfide mineralization is absent. This rather subtle textural feature is used reliably by mine geologists to follow the Reef during exploration and mine development. Although some high tenor sulfides (>1000 ppm Pd in 100% sulfide) are found sporadically in the hanging wall cumulates, these accumulations are too small to be economically viable. We present quantitative rock fabric data for four Reef Package and hanging wall intersections collected by electron back-scattered diffraction (EBSD). Plagioclase fabrics in the hanging wall are characterized by low variance in grain sizes and a strong point maximum concentration of (010) and a perpendicular girdle distribution of [100] consistent with an axial B-type fabric. These fabrics are indicative of either compaction of the crystal mush or crystal settling of nucleated crystals, the bulk magma in a chamber. Conversely, the fabrics of the Reef Package show higher variance grain in size distributions and weak to undeveloped preferred orientation of plagioclase crystals that did not undergo significant alignment or textural equilibration of plagioclase grains. The absence of foliation in the Reef Package stands in contrast both to hanging wall fabrics and to other reported EBSD datasets of plagioclase crystals orientations from the Bushveld Complex, the Skaergaard Intrusion, and the Rum Intrusion. Furthermore, plagioclase crystal size distributions for the Reef Package show flatter slopes and convex profiles with fewer crystals at small size fractions indicating the dissolution of small crystals during partial melting and textural coarsening (i.e . Ostwald ripening) and crystal growth. Crystal growth was favored over the nucleation of new crystals during prolonged interaction with a hot infiltrating melt into the resident mush resulting in the coarse-grained textures of the Reef Package cumulates. The hanging wall contact represents a boundary between partially remelted crystal mush of the Reef Package, where sulfide mineralization formed and accumulated, and an overlying essentially barren cumulate pile. The hanging wall cumulates formed following the cessation of footwall erosion and the resumption of crystal accumulation by normal magma chamber processes.

Montana↗

USGS2021

Mineral deposit discovery order and three-part quantitative assessments

Larger oil pools tending to be discovered earlier in an exploration play suggests the same pattern might exist for mineral deposits and could be used in predicting sizes of undiscovered deposits in mineral assessments. The volume of individual petroleum pools is highly correlated with surface projection area of pools in basins. The gradual additions to individual oil pool reserves over time adds to the appearance of larger pools being discovered earlier. Comparisons of surface projected areas of mineral deposits to their tonnages showed significant positive relationships in all 10 deposit types analyzed, suggesting that larger deposits should be discovered earlier than small deposits. Analysis of deposits consistent with three-part mineral assessments identified 9 combinations of mineral deposit types in large regions each containing multiple geological permissive tracts showing negative and 1 positive relationships of deposit size with discovery date significant at the 1% level. Twenty other tests of regions containing multiple permissive settings had either negative or positive relationships, none significantly different from those that might occur by chance. The large regions are mostly based on political boundaries. These results suggest mineral deposit discovery order is not the same as observed in oil pool exploration. The widely employed three-part quantitative mineral resource assessments are an obvious choice to benefit from patterns of declining deposit sizes with order of discovery. The 30 tests of relationships of discovery dates to deposit sizes demonstrated here were performed with deposits consistent with those in three-part assessments, but the large areas are not consistent with permissive tracts used in these assessments because they also contain substantial non-permissive geology. In 100 permissive tracts assessed with three-part assessments of multiple deposit types located throughout the world, the median number of known well-explored deposits is 1 and 90 percent of tracts report less than 9 deposits. The number of well-explored deposits in three-part assessed tracts tends to be quite small, limiting any ability to recognize a discovery order versus size relationship. In a three-part assessment of undiscovered porphyry copper deposits of South America, only 7 of 26 delineated tracts contained more than 2 known deposits and only 1 had a significant negative relationship between tonnage of known deposits and year of discovery (p = 0.04). Most predicted undiscovered deposits in this tract were expected to be under extensive unexplored post-mineralization cover, meaning the general grade and tonnage model should be applied because the discovery order process starts over. Projection of deposit sizes based on discovery order would provide a biased estimate of the undiscovered deposit sizes in this case. Thus, although a discovery order versus size relationship could exist in three-part mineral assessments, only rarely might the pattern be useful to predict sizes of undiscovered deposits.

Ore Geology Reviews↗

USGS2021

Origin of the J-M Reef and Lower Banded series, Stillwater Complex, Montana, USA

The origin and parental magma for layered cumulates in the Lower Banded series (LBS) and the J-M Reef Pd-Pt deposit of the Stillwater Complex remains poorly constrained. We present whole-rock lithogeochemistry and mineral chemistry from LBS rocks collected from drill holes and surface samples from the Mountain View area of the complex that in total span nearly the entirety of the LBS stratigraphy. Excess S, Pt, and Pd in the noritic and gabbronoritic cumulates of the LBS indicate that small amounts of high tenor sulfide liquid generated at very low degrees of sulfide oversaturation were ubiquitous parts of the cumulate assemblage. We show that a simple two-stage thermodynamic model of assimilation-batch crystallization of a komatiitic parental magma in the lower crust, produces a close match to a common suite of fine-grained gabbronorite dikes and sills that intrude both the complex and its footwall. After fractionating ultramafic cumulates in the lower crust, the model contaminated komatiitic liquid produces upper crustal cumulates by batch crystallization en route to or at the level of the intrusion. The modeled rocks have compositions and mineral assemblages closely resembling pyroxenite of the Bronzitite zone and both norite and gabbronorite cumulates in the lower LBS. The trends from the Bronzitite zone through Norite zone I and Gabbronorite zone I can be understood as the result of deposition of crystals from successive batches of the same contaminated parental magma, with an upward trend toward greater amounts of cooling before the separation of crystals from liquid. The olivine-bearing suite of Olivine-bearing zone I, which includes the J-M Reef, can be modeled by partial remelting of the same norite and gabbronorite cumulates due to a temporarily increased flux of hot, moderately less contaminated LBS parental magma that infiltrated partially molten cumulates because its density exceeded that of the interstitial liquid. This model suggests that infiltration of hot Mg-rich parental liquid into moderately PGE-enriched footwall cumulates may be fundamental to the formation of the extremely high tenor sulfide mineralization in the J-M Reef ore zone, and perhaps other reef-type deposits worldwide. The same metal tenors that would require silicate/sulfide mass ratios (i.e., R-factors) of 10 5 to 10 6 in a single stage of equilibration would be attained during this second stage of interaction by the incremental infiltration and passage of LBS parental magma through previously sulfide saturated cumulate mush.

Montana↗

USGS2020

The nature and composition of the J-M Reef, Stillwater Complex, Montana, USA

In this contribution, we analyze 30 years of mine development data and quantitatively identify the processes that control the grade and tenor of the mineralized rock. An assay database of more than 60,000 samples was used to examine variations in ore grade and tenor of the sulfide mineralization in the J-M reef horizon of the Stillwater Complex along the strike and down the dip of the deposit in the area of the Stillwater mine. We compare these results with data from the East Boulder mine and whole-rock lithogeochemistry of samples collected along the entire strike length of the complex. We find significant variation in the composition of the reef sulfides in different spatial domains of the Stillwater mine area and between the Stillwater and East Boulder mines. Most of the variation in the grade and tenor can be explained by a variation in the mass of silicate magma with which the sulfide liquid equilibrated (i.e., R factor); however, geochemical and textural evidence suggests that parts of the reef may have experienced significant S loss following initial sulfide melt segregation. Some variability in the reef tenor and grade can be attributed to variable amounts of sulfur loss due to low-temperature hydrothermal fluids and the overestimation or underestimation of metal concentrations in reef assays due to the nugget effect. Furthermore, we address the Pd/Pt ratio of the reef samples and suggest that the lower solubility of Pt in the parental silicate melt may have caused the crystallization and removal of Pt alloys at some point before the melt reached sulfide saturation and Pt could partition into the sulfide liquid. This disparity between the prior evolution of Pt and Pd in the silicate melt resulted in the observed Pd/Pt ratio of ~3.65 across all areas of the reef—a value significantly larger than anticipated for primitive mantle-derived magmas.

Montana↗

USGS2020

Grade and tonnage model for tungsten skarn deposits—2020 update

This report presents an updated grade and tonnage model for tungsten skarn deposits. As a critical component of the U.S. Geological Survey’s three-part form of quantitative mineral resource assessment, robust grade and tonnage models are essential to transforming mineral resource assessments into effective tools for decision makers. Using the best data available at the time of publication, this represents the first attempt in nearly 30 years to capture current mineral inventory and cumulative production data for worldwide tungsten skarn deposits. The accuracy of modern assessments of undiscovered tungsten skarn resources is highly influenced by the use of current data on the distribution of the grades and tonnages of well-explored tungsten skarn deposits. Primary factors affecting the changes to these distributions in the model presented here compared with those of previous models are the inclusion of important deposits, especially those in China that had been omitted in previous models; expanded mineral inventories resulting from increased exploration; and changes to international reporting standards. These factors have resulted in dramatic increases in average ore tonnage and slight decreases in the average grade of tungsten skarn deposits compared with previous models. Large increases in contained metal are observed among many of the individual deposits incorporated within this model that were also included in previous tungsten skarn grade and tonnage models. This report also provides recommendations for input parameters related to grade and tonnage models to use with software tools designed to facilitate the three-part form of quantitative mineral resource assessments.

Scientific Investigations Report↗

USGS2020

Mapping the 3-D extent of the Stillwater Complex, Montana—Implications for potential platinum group element exploration and development

Geophysical models characterize the exposed and interpreted buried extent of the Stillwater Complex, critical for understanding the origin of the layered mafic intrusion and its associated high-grade platinum group element resources. The 3D models, constrained by gravity, magnetic, xenolith, seismic, borehole, and rock property data indicate that the likely maximum extent of the Stillwater Complex beneath Phanerozoic cover is ~10 times greater than its outcrop, ~2240 km 2 . The thickness values are poorly constrained but vary from ~7000 to 12,000 m, depending on crustal and mantle density variations and depths to the top of the lower crust and mantle. This thickness may include dense metasedimentary units of the basin into which the Stillwater Complex intruded. Using the modeled thickness results in a volume estimate of ~24,700 km 3 , albeit poorly constrained. New analyses of xenoliths from the Cretaceous Sliderock and Suzie Peak intrusions produce ages of 2706–2716 Ma, corresponding to the age of the Stillwater Complex, and 2813 Ma, corresponding to the age of Archean gneissic basement. Seismic reflectors in inferred Archean crystalline basement, possibly including the Stillwater Complex, dip ~25–30° north, with segments dipping as much as 70° north. Layered reflectors beneath the Phanerozoic sedimentary section and above the inferred Archean crystalline basement may represent metasedimentary units, perhaps a southern extension of the Mesoproterozoic Belt Basin. The potential field models and the seismic reflection data suggest that the Stillwater Complex was dipping northward prior to deposition of Cambrian strata, perhaps uplifted in the late Archean or Proterozoic as previously proposed, and that during Laramide times, faulting and intrusions highly disrupted the complex. Temperature measurements from boreholes help constrain the depths of feasible mining of the complex.

Montana↗

USGS2019

Assessment of undiscovered copper resources of the world, 2015

The U.S. Geological Survey completed the first-ever global assessment of undiscovered copper resources for the two most significant sources of global copper supply: porphyry copper deposits and sediment-hosted stratabound copper deposits. The geology-based study identified 236 areas for undiscovered copper in 11 regions of the world. Estimated amounts of undiscovered copper resources are reported at different levels of probability. The results of the assessment indicate that a mean of at least 3,500 million metric tons (Mt) of undiscovered copper associated with these deposit types may exist worldwide, exceeding the 2,100 Mt of identified copper resources tabulated for these deposit types. Porphyry copper deposits contain 1,800 Mt of identified copper resources and are estimated to contain a mean of at least 3,100 Mt of undiscovered copper resources. South America is the dominant source for both identified and undiscovered porphyry copper resources. However, several regions of Asia, including China, have significant potential for undiscovered porphyry copper resources. The amount of mean undiscovered porphyry copper resources that may be economic to extract varies as a function of likely depth to a deposit and quality of local infrastructure that could support mining. Sediment-hosted stratabound copper deposits contain 310 Mt of identified copper resources and are estimated to contain a mean of at least 420 Mt of undiscovered copper resources. The sedimentary basins that may contain significant undiscovered copper resources are the Katanga Basin in central Africa, the Southern Permian Basin of Poland and Germany, the Chu-Sarysu Basin of Kazakhstan, and the Kodar-Udokan area of Russia. Sedimentary basins in the Northwest Botswana Rift in Botswana and Namibia, the Benguela and Cuanza Basins of Angola, and the Cambrian rocks of Egypt, Israel, and Jordan are recognized as having significant potential for undiscovered copper resources in sediment-hosted stratabound copper deposits; however, these areas require additional research, analysis, and evaluation before quantitative resource estimates can be made. The estimate of at least 3,500 Mt of undiscovered copper in two deposit types provides a basis for long-range planning for this important commodity. U.S. copper consumption is 2 Mt per year, world consumption is about 20 Mt per year, and global production from these two deposit types is about 12 Mt per year. Total global copper production from all deposit types from 1879 to 2012 was about 600 Mt. The world’s use of mineral resources, such as copper, will continue to increase in the foreseeable future to support a growing world population and increasing standards of living. The world has sufficient copper to last for decades. However, increases in exploration and growth in mining capacity will be necessary to identify and develop undiscovered resources to supply projected demand.

Scientific Investigations Report↗

USGS2019

Tectono-magmatic evolution of porphyry belts in the central Tethys region of Turkey, the Caucasus, Iran, western Pakistan, and southern Afghanistan

Exploration in the central Tethys region of Turkey, Armenia, Azerbaijan, Georgia, Iran, and weste rn Pakistan has led to the identification of the giant Reko Diq (24 Mt Cu and 1300 t Au), Sar Cheshmeh (8.9 Mt Cu and 0.46 Mt Mo), Sungun (5.1 Mt Cu and 0.20 Mt Mo), and Kadjaran (4.6 Mt Cu, 0.94 Mt Mo, and 1100 t Au), and 10 other large (1–2 Mt Cu) porphyry deposits including Saindak, Cevizlidere, Teghout, Meiduk, and Halilağa. Continued exploration efforts have also resulted in the development of porphyry-related gold deposits such as Kişladağ (9.6 Moz Au), Çöpler (3.7 Moz Au), Aği Daği (1.7 Moz Au), and Sary Gunay (3.0 Moz Au), and in the generation of several other promising exploration projects. The distribution in space and time of porphyry deposits in the central Tethys region was shaped by complex pre- to post-mineral tectonic, igneous, collisional, uplift and burial events. These events are represented by a partially-overlapping and variably exhumed and covered collage of twenty-six Early Jurassic to Holocene magmatic belts permissive for the occurrence of porphyry deposits (porphyry tracts and sub-tracts). Twelve tracts or sub-tracts are characterized by compressional continental arcs that formed on drifting terranes or continental margins, 10 developed in compressional to extensional intra-oceanic arc and backarc-rift settings, and 4 formed in extensional post-collisional environments over amalgamated terranes. Eight of these belts were variably affected by coeval and younger metamorphic, fold-and-thrust, and extensional faulting events. Fifty-four porphyry Au-(Cu), Cu-Au, Cu-Mo, Mo-Cu deposits, 15 porphyry-related Au, Au-(Mo) and W-(Mo-Au) deposits, 239 porphyry prospects, and 68 other porphyry-related mineral sites were identified in the study region. Of the 376 porphyry and porphyry-related sites, about 11% formed in island arc, 42% in continental arc, 20% in backarc, and 27% in post-collisional settings. Of the 69 porphyry and porphyry-related deposits, 7% developed in intra-oceanic arc, 41% in continental arc, 27% in backarc, and 25% in post-collisional settings. The largest occur in either compressional continental arc (18 deposits including the Reko Diq and Sar Cheshmeh giants) or post-collisional (13 deposits including the Kadjaran and Sungun giants) environments. Ninety percent of the largest porphyry or porphyry-related deposits occur in only 9 of the 26 permissive porphyry tracts or sub-tracts. Moreover, 88, 90, and 77% of the identified Cu, Mo, and Au resources are contained in porphyry deposits that occur in only 4 of these 9 tracts. Of these 4 tracts, 3 outline arc settings, and one delimits a post-collisional environment. The compositional diversity of porphyry intrusions in these tectono-magmatic environments generally varies from island arc settings with the most restricted range (partly alkaline but mainly calc-alkaline dioritic to granodioritic-tonalitic), to continental arc (calc-alkaline dioritic-quartz dioritic, granodioritic, quartz monzonitic-granitic, and less commonly mildly alkaline), to backarc (mildly alkaline and calc-alkaline dioritic to granitic), to post-collisional settings with the most expansive range (alkaline and calc-alkaline mafic to felsic, and weakly peraluminous). Metal associations also vary broadly as a function of porphyry intrusion composition from weakly peraluminous to metaluminous felsic (Mo[±W ± Cu]; <2% of porphyry-related systems [i.e., Tyrnyauz]), to metaluminous felsic and intermediate (Cu-Mo[±Au]; 85% [i.e., Cevizlidere, Haft Cheshmeh, Kahang, Sar Cheshmeh, Sungun, Teghout, Reko Diq, Saindak]), to mildly alkaline felsic and intermediate (Cu-Au[±Mo] [i.e., Agarak, Kadjaran, Kale Kafi]) and mafic (Au-Cu; 12% [i.e., Çöpler]), and to alkaline felsic (Au-Mo; 1% of porphyry-related systems [i.e., Kişladağ). Tectonic changes were critical in triggering the formation of large porphyry deposits in the region. Large porphyry deposits were preferentially emplaced in continental arc settings shortly before major collisional events (Dar Alu, Kahang, Meiduk, Now Chun, and the giant Sar Cheshmeh and Reko Diq deposits), or in post-subduction environments shortly after collision (Bakirçay, Güzelyayla, Haft Cheshmeh, Masjed Daghi, and the giant Kadjaran and Sungun deposits) or during periods of prominent extension (Aği Daği, Halilağa, Kişladağ, Sari Gunay, and Zarshuran porphyry-related deposits). Collision-induced uplift, erosion, and removal of coeval volcanic rocks favorably exposed the hypabyssal level of subduction-related porphyry deposits. Extensional structures that developed parallel and orthogonal to the compressional principal stress component along transtensional or transpressional strike-slip faults or in pull-apart basins commonly controlled porphyry-related deposits in post-collisional settings. The latter deposits typically exhibit shallow epithermal levels of emplacement because of preservation by burial. Seventeen porphyry deposits and one porphyry-related deposit in the study region are reported to contain significant supergene resources. Relatively mature levels of secondary copper enrichment in dominantly granodioritic to granitic porphyry deposits occur in areas where large pyrite-rich quartz-sericite alteration zones have been preserved and exposed to surface oxidation (Güzelyayla and Ulutaş in northeastern Turkey; Agarak, Ankavan, Dastakert, Kadjaran, and Teghout in Armenia; Ali Javad in northern Iran; Kale Kafi in central Iran; Darreh Zar, Meiduk, Now Chun, and Sar Cheshmeh in southeastern Iran; and Tanjeel in southwestern Pakistan). Chalcocite blankets also developed over porphyry deposits in regions where significant post-mineral faulting has occurred (Muratdere and Sarıçayıryayla in western Turkey). Normal faulting also enhanced secondary enrichment of gold in the Halilağa porphyry and Sary Gunay porphyry-related deposits located respectively in western Turkey and northern Iran. Evaluation of provincial as well as local controls strongly suggests that continued exploration in the region will lead to the identification of additional porphyry and porphyry-related deposits. These deposits will likely be found under younger cover formations in porphyry belts that are already known, and in association with superjacent high- and intermediate-sulfidation epithermal deposits, or increasingly peripheral skarn, carbonate-replacement, and sediment-hosted deposits. Application of suitable exploration techniques to detect concealed and/or deformed deposits in porphyry belts that remain under-explored may also prove productive.

Tethys region↗

USGS2017

Platinum-group elements

The platinum-group elements (PGEs)—platinum, palladium, rhodium, ruthenium, iridium, and osmium—are metals that have similar physical and chemical properties and tend to occur together in nature. PGEs are indispensable to many industrial applications but are mined in only a few places. The availability and accessibility of PGEs could be disrupted by economic, environmental, political, and social events. The United States net import reliance as a percentage of apparent consumption is about 90 percent. PGEs have many industrial applications. They are used in catalytic converters to reduce carbon monoxide, hydrocarbon, and nitrous oxide emissions in automobile exhaust. The chemical industry requires platinum or platinum-rhodium alloys to manufacture nitric oxide, which is the raw material used to manufacture explosives, fertilizers, and nitric acid. In the petrochemical industry, platinum-supported catalysts are needed to refine crude oil and to produce aromatic compounds and high-octane gasoline. Alloys of PGEs are exceptionally hard and durable, making them the best known coating for industrial crucibles used in the manufacture of chemicals and synthetic materials. PGEs are used by the glass manufacturing industry in the production of fiberglass and flat-panel and liquid crystal displays. In the electronics industry, PGEs are used in computer hard disks, hybridized integrated circuits, and multilayer ceramic capacitors. Aside from their industrial applications, PGEs are used in such other fields as health, consumer goods, and finance. Platinum, for example, is used in medical implants, such as pacemakers, and PGEs are used in cancer-fighting drugs. Platinum alloys are an ideal choice for jewelry because of their white color, strength, and resistance to tarnish. Platinum, palladium, and rhodium in the form of coins and bars are also used as investment commodities, and various financial instruments based on the value of these PGEs are traded on major exchanges. PGEs are among the rarest metals; Earth’s upper crust contains only about 0.0005 part per million (ppm) platinum. Today, the average grade of PGEs in ores that are mined primarily for their PGE concentrations varies from 5 to 15 ppm, although the concentration of PGEs in hand-picked ore specimens may range from tens to hundreds of parts per million. More than 100 different minerals have one of the PGEs as an essential component. PGE minerals occur as native metals. They also occur as compounds with other transition metals (copper, iron, mercury, nickel, and silver), post-transition metals (bismuth, lead, and tin), metalloids (antimony, arsenic, and tellurium), and nonmetals (selenium and sulfur). From 1900 to 2011, approximately 14,200 metric tons of PGEs was produced, and roughly 95 percent of that production (13,500 metric tons) took place between 1960 and 2011. The breakdown of production by country shows that, since 1900, about 90 percent of the production came from South Africa and Russia. The secondary supply of platinum, palladium, and rhodium is obtained through the recycling of catalytic converters from end-of-life vehicles, jewelry, and electronic equipment. Recycled platinum, palladium, and rhodium provide a significant proportion of the world’s total supply; these secondary sources are sufficient to close the gap between world mine production and consumption. Exploration and mining companies report resources of about 104,000 metric tons of PGEs (including minor amounts of gold) in mineral deposits around the world that could be developed. For PGEs, almost all the reported production and identified resources are associated with deposits in three geologic features—the Bushveld Complex, which is a layered mafic-to-ultramafic intrusion in South Africa; the Great Dyke, which is a layered mafic-to-ultramafic intrusion in Zimbabwe; and sill-like intrusions associated with flood basalts in the Noril’sk-Talnakh area of Russia. The metallic forms of PGEs are generally considered to be inert. PGEs pose a risk to human health only in cases where individuals are occupationally exposed to synthetic PGE compounds, especially workers in precious-metal refineries. In the natural environment, background PGE concentrations are low in water, sediment, soil, and plants. Anthropogenic sources of PGEs in the environment include catalytic converters used in modern automobiles, platinum-based chemotherapy drugs, and smelter emissions. The abundance of sulfide minerals defines the environmental and geologic characteristics of PGE-enriched magmatic sulfide deposits; those deposits with the highest amount of sulfide minerals could have the highest environmental impact. Acid rock drainage from reef-type and contact-type deposits is unlikely because the ores and their host rocks contain low proportions of sulfide minerals. For some conduit-type orebodies with massive ores, mineral-processing techniques separate and produce concentrates of copper-, iron-, and nickel-bearing sulfide minerals; those with copper and nickel are processed to extract metal, but the iron-sulfide minerals, mainly pyrrhotite, are discarded as waste. This results in waste material with a high acid-generating potential. The most significant primary source of PGEs in the United States is a deposit in the Stillwater Complex, which is a layered igneous intrusion in Montana. Approximately 305 metric tons of platinum and palladium have been mined from the Stillwater Complex deposit since 1986. Exploration and development drilling indicate that another 2,200 metric tons are present. Mining has progressed to depths of 1,800 meters below the surface, but the bottom of the ore deposit has not been reached; geologic estimates suggest that another 1,000 to 6,200 metric tons of PGEs could be present at depth. In the future, PGEs may be mined from deposits found near the base of the Duluth Complex, which is a group of igneous intrusions in Minnesota.

Professional Paper↗

USGS2017

Cobalt—Styles of deposits and the search for primary deposits

Cobalt (Co) is a potentially critical mineral. The vast majority of cobalt is a byproduct of copper and (or) nickel production. Cobalt is increasingly used in magnets and rechargeable batteries. More than 50 percent of primary cobalt production is from the Central African Copperbelt. The Central African Copperbelt is the only sedimentary rock-hosted stratiform copper district that contains significant cobalt. Its presence may indicate significant mafic-ultramafic rocks in the local basement. The balance of primary cobalt production is from magmatic nickel-copper and nickel laterite deposits. Cobalt is present in several carbonate-hosted lead-zinc and copper districts. It is also variably present in Besshi-type volcanogenic massive sulfide and siliciclastic sedimentary rock-hosted deposits in back arc and rift environments associated with mafic-ultramafic rocks. Metasedimentary cobalt-copper-gold deposits (such as Blackbird, Idaho), iron oxide-copper-gold deposits, and the five-element vein deposits (such as Cobalt, Ontario) contain different amounts of cobalt. None of these deposit types show direct links to mafic-ultramafic rocks; the deposits may result from crustal-scale hydrothermal systems capable of leaching and transporting cobalt from great depths. Hydrothermal deposits associated with ultramafic rocks, typified by the Bou Azzer district of Morocco, represent another type of primary cobalt deposit. In the United States, exploration for cobalt deposits may focus on magmatic nickel-copper deposits in the Archean and Proterozoic rocks of the Midwest and the east coast (Pennsylvania) and younger mafic rocks in southeastern and southern Alaska; also, possibly basement rocks in southeastern Missouri. Other potential exploration targets include— The Belt-Purcell basin of British Columbia (Canada), Idaho, Montana, and Washington for different styles of sedimentary rock-hosted cobalt deposits; Besshi-type VMS deposits, such as the Greens Creek (Alaska) deposit and the Ducktown (Tennessee) waste and tailings; and Known five-element vein districts in Arizona and New Mexico, as well as in the Yukon-Tanana terrane of Alaska; and hydrothermal deposits associated with ultramafic rocks along the west coast, in Alaska, and in the Appalachian Mountains.

Open-File Report↗

USGS2017

Spatiotemporal analysis of changes in lode mining claims around the McDermitt Caldera, northern Nevada and southern Oregon

Resource managers and agencies involved with planning for future federal land needs are required to complete an assessment of and forecast for future land use every ten years. Predicting mining activities on federal lands is difficult as current regulations do not require disclosure of exploration results. In these cases, historic mining claims may serve as a useful proxy for determining where mining-related activities may occur. We assess the utility of using a space–time cube (STC) and associated analyses to evaluate and characterize mining claim activities around the McDermitt Caldera in northern Nevada and southern Oregon. The most significant advantage of arranging the mining claim data into a STC is the ability to visualize and compare the data, which allows scientists to better understand patterns and results. Additional analyses of the STC (i.e., Trend, Emerging Hot Spot, Hot Spot, and Cluster and Outlier Analyses) provide extra insights into the data and may aid in predicting future mining claim activities.

Nevada, Oregon↗

USGS2017

Undiscovered porphyry copper resources in the Urals—A probabilistic mineral resource assessment

A probabilistic mineral resource assessment of metal resources in undiscovered porphyry copper deposits of the Ural Mountains in Russia and Kazakhstan was done using a quantitative form of mineral resource assessment. Permissive tracts were delineated on the basis of mapped and inferred subsurface distributions of igneous rocks assigned to tectonic zones that include magmatic arcs where the occurrence of porphyry copper deposits within 1 km of the Earth's surface are possible. These permissive tracts outline four north-south trending volcano-plutonic belts in major structural zones of the Urals. From west to east, these include permissive lithologies for porphyry copper deposits associated with Paleozoic subduction-related island-arc complexes preserved in the Tagil and Magnitogorsk arcs, Paleozoic island-arc fragments and associated tonalite-granodiorite intrusions in the East Uralian zone, and Carboniferous continental-margin arcs developed on the Kazakh craton in the Transuralian zone. The tracts range from about 50,000 to 130,000 km 2 in area. The Urals host 8 known porphyry copper deposits with total identified resources of about 6.4 million metric tons of copper, at least 20 additional porphyry copper prospect areas, and numerous copper-bearing skarns and copper occurrences. Probabilistic estimates predict a mean of 22 undiscovered porphyry copper deposits within the four permissive tracts delineated in the Urals. Combining estimates with established grade and tonnage models predicts a mean of 82 million metric tons of undiscovered copper. Application of an economic filter suggests that about half of that amount could be economically recoverable based on assumed depth distributions, availability of infrastructure, recovery rates, current metals prices, and investment environment.

Urals↗

USGS2017

Fractional crystallization-induced variations in sulfides from the Noril’sk-Talnakh mining district (polar Siberia, Russia)

The distribution of platinum-group elements (PGE) within zoned magmatic ore bodies has been extensively studied and appears to be controlled by the partitioning behavior of the PGE during fractional crystallization of magmatic sulfide liquids. However, other chalcophile elements, especially TABS (Te, As, Bi, Sb, and Sn) have been neglected despite their critical role in forming platinum-group minerals (PGM). TABS are volatile trace elements that are considered to be mobile so investigating their primary distribution may be challenging in magmatic ore bodies that have been somewhat altered. Magmatic sulfide ore bodies from the Noril’sk-Talnakh mining district (polar Siberia, Russia) offer an exceptional opportunity to investigate the behavior of TABS during fractional crystallization of sulfide liquids and PGM formation as the primary features of the ore bodies have been relatively well preserved. In this study, new petrographic (2D and 3D) and whole-rock geochemical data from Cu-poor to Cu-rich sulfide ores of the Noril’sk-Talnakh mining district are integrated with published data to consider the role of fractional crystallization in generating mineralogical and geochemical variations across the different ore types (disseminated to massive). Despite textural variations in Cu-rich massive sulfides (lenses, veins, and breccias), these sulfides have similar chemical compositions, which suggests that Cu-rich veins and breccias formed from fractionated sulfide liquids that were injected into the surrounding rocks. Numerical modeling using the median disseminated sulfide composition as the initial sulfide liquid composition and recent DMSS/liq and DISS/liq predicts the compositional variations observed in the massive sulfides, especially in terms of Pt, Pd, and TABS. Therefore, distribution of these elements in the massive sulfides was likely controlled by their partitioning behavior during sulfide liquid fractional crystallization, prior to PGM formation. Our observations indicate that in the Cu-poor massive sulfides the PGM formed as the result of exsolution from sulfide minerals whereas in the Cu-rich massive sulfides the PGM formed by crystallization from late-stage fractionated sulfide liquids. We suggest that the significant amount of Sn-bearing PGM may be related to crustal contamination from granodiorite, whereas As, Bi, Te, and Sb were likely added to the magma along with S from sedimentary rocks. Large PGM that are scarce and randomly distributed may account for most of the whole-rock Pt budget. Based on our results, we propose a holistic genetic model for the formation of the magmatic sulfide ore bodies of the Noril’sk-Talnakh mining district.

Siberia↗

USGS2016

Geology and mineral resources of the North-Central Montana Sagebrush Focal Area: Chapter D in Mineral resources of the Sagebrush Focal Areas of Idaho, Montana, Nevada, Oregon, Utah, and Wyoming

Summary The U.S. Department of the Interior has proposed to withdraw approximately 10 million acres of Federal lands from mineral entry (subject to valid existing rights) from 12 million acres of lands defined as Sagebrush Focal Areas (SFAs) in Idaho, Montana, Nevada, Oregon, Utah, and Wyoming (for further discussion on the lands involved see Scientific Investigations Report 2016–5089–A). The purpose of the proposed action is to protect the greater sage-grouse ( Centrocercus urophasianus ) and its habitat from potential adverse effects of locatable mineral exploration and mining. The U.S. Geological Survey Sagebrush Mineral-Resource Assessment (SaMiRA) project was initiated in November 2015 and supported by the Bureau of Land Management to (1) assess locatable mineral-resource potential and (2) to describe leasable and salable mineral resources for the seven SFAs and Nevada additions. This chapter summarizes the current status of locatable, leasable, and salable mineral commodities and assesses the potential of locatable minerals in the North-Central Montana SFA. The proposed withdrawal area that is evaluated in this report is located in north-central Montana, and includes parts of Fergus, Petroleum, Phillips, and Valley Counties.

Montana↗

USGS2016

Spatial database for a global assessment of undiscovered copper resources: Chapter Z in Global mineral resource assessment

As part of the first-ever U.S. Geological Survey global assessment of undiscovered copper resources, data common to several regional spatial databases published by the U.S. Geological Survey, including one report from Finland and one from Greenland, were standardized, updated, and compiled into a global copper resource database. This integrated collection of spatial databases provides location, geologic and mineral resource data, and source references for deposits, significant prospects, and areas permissive for undiscovered deposits of both porphyry copper and sediment-hosted copper. The copper resource database allows for efficient modeling on a global scale in a geographic information system (GIS) and is provided in an Esri ArcGIS file geodatabase format.

Scientific Investigations Report↗