Geology ReportsSearch

Geology topics

E. Taciroglu

Publications and source records attributed to E. Taciroglu.

3 recordsLinked to original sources

Responses of the Carquinez, California suspension bridge during the MW6.0 South Napa earthquake of August 24, 2014

The behavior of the suspension bridge in Carquinez, CA, during the Mw6.0 24 August 2014 South Napa, CA earthquake is studied using data recorded by an extensive array of accelerometers. Modes, corresponding frequencies and damping are identified and compared with previous studies that used ambient data of the deck only plus mathematical models. Data are systematically analyzed for vertical, transverse and torsional motions of the deck, and transverse, longitudinal and torsional motions of the towers. The transverse and vertical fundamental mode frequencies of the deck are the same (0.17Hz) due to coupling. Higher frequencies for transverse and vertical coupled modes are the same at 0.46Hz and 0.98Hz. Tower translational frequencies are 0.39Hz in the transverse direction and 0.46 Hz in the longitudinal direction, and are coupled with those of the deck. Coupling of torsional modes of the tower and deck are identified. A beating effect is observed, particularly for torsional motions.

California

Joint system-input identification of bridge structures

This paper presents a novel framework for system identification of bridge structures using recorded earthquake data. Bridge structures are prone to spatial variability of ground motions because they extend over relatively long distances. So, input motion measurement is a challenging task, especially for long bridges with multiple piers. Moreover, direct measurement of the bridge Foundation Input Motions (FIMs) may not be possible due to both inertial and kinematic Soil-Structure Interaction (SSI) effects. In this study, we propose a joint system-input identification solution using sparsely measured earthquake-induced responses. We verify this method and its applicability for real scale problems using simulated data obtained from the Golden Gate Bridge.

California

Blind identification of the Millikan Library from earthquake data considering soil–structure interaction

The Robert A. Millikan Library is a reinforced concrete building with a basement level and nine stories above the ground. Located on the campus of California Institute of Technology (Caltech) in Pasadena California, it is among the most densely instrumented buildings in the U.S. From the early dates of its construction, it has been the subject of many investigations, especially regarding soil–structure interaction effects. It is well accepted that the structure is significantly interacting with the surrounding soil, which implies that the true foundation input motions cannot be directly recorded during earthquakes because of inertial effects. Based on this limitation, input–output modal identification methods are not applicable to this soil–structure system. On the other hand, conventional output-only methods are typically based on the unknown input signals to be stationary whitenoise, which is not the case for earthquake excitations. Through the use of recently developed blind identification (i.e. output-only) methods, it has become possible to extract such information from only the response signals because of earthquake excitations. In the present study, we employ such a blind identification method to extract the modal properties of the Millikan Library. We present some modes that have not been identified from force vibration tests in several studies to date. Then, to quantify the contribution of soil–structure interaction effects, we first create a detailed Finite Element (FE) model using available information about the superstructure; and subsequently update the soil–foundation system's dynamic stiffnesses at each mode such that the modal properties of the entire soil–structure system agree well with those obtained via output-only modal identification.

California